[Workshop Announcement] Electrophysiology Experiment Workshop 2025

An automated patch clamp system capable of meeting all needs, from small-scale screening projects to high-throughput screening.

Designed to seamlessly integrate fully automated compound screening into the drug discovery process, it provides the best performance in high-throughput screening of ion channels in drug discovery, pharmacology, safety, pharmaceutical research and development, and exploratory screening departments. Additionally, by using the 32-well mode, it can be optimized for small-scale compound screening and projects. ■ Simultaneous measurement of 384 cells ■ 20,000 data points per day ■ High giga-seal success rate ■ Supports a variety of ion channel targets and enables rapid assay system development ■ Measurement of action potentials using current clamp is also possible ■ Extracellular/intracellular perfusion is possible ■ High-speed external solution exchange (up to 110 µl/s) is possible ■ Measurement section and 12 decks can be individually temperature controlled (temperature range: 10–37°C) ■ Compound plate preparation on the deck is possible ■ Single & multi-well chips available (in-house manufactured) ■ Borosilicate glass chips reduce compound adsorption ■ Approximately 8 hours of unmanned operation is possible ■ Comes with powerful analysis software ■ Validated system for CiPA

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

No pipetting operations are required during the experiment. It is equipped with a benchtop dispensing device that can automatically measure up to 48 cells continuously in an auto patch clamp system.

This is a tabletop-sized auto patch clamp system that can simultaneously measure up to 8 cells with giga-seal formation. With easy experimental setup, stable whole-cell recordings, and sophisticated software, it enables highly efficient compound ion channel screening. ■ Equipped with a dispensing device, allowing for fully automated experiments (measurements) ■ Simultaneous measurement of 4 cells / 8 cells (up to 48 cells can be measured continuously) ■ 250 to 600 data points per day ■ Automation from giga-seal formation to whole-cell formation ■ Compatible with voltage-dependent and ligand-dependent channels ■ Measurement of action potentials using current clamp is also possible ■ Dynamic clamp capability (optional) ■ Temperature control and extracellular/intracellular perfusion possible ■ Cooling plate allows for cooling of cells and compounds ■ Borosilicate glass chips reduce compound adsorption ■ Comes with excellent analysis software

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

A world-class patch clamp system that is easy to operate for anyone, allowing for simple data acquisition and verification.

This is a patch clamp system of the world's smallest class that can perform gigaseal recordings, optimal for safety testing/toxicity testing/pharmacological testing/screening of compounds at the cellular level in the functional structural analysis of ion channels, research on related diseases, and drug development processes. 【Features】 ■ No need for manual patch clamp experience or difficult operations ■ No need for microscope, vibration table, manipulator, Faraday cage, or puller ■ 20 to 50 data points per day ■ Automation from gigaseal formation to whole cell formation ■ Compatible with voltage-dependent, ligand-dependent, and temperature-dependent channels ■ Options available for research on channel rhodopsins and mechanosensitive channels using light stimulation ■ Measurement of action potentials using current clamp is also possible ■ Supports a wide range of applications and enables rapid assay system development ■ Reduces compound adsorption with borosilicate glass chips ■ Optional temperature control (10 to 50°C), capable of extracellular/intracellular perfusion ■ Can be integrated with amplifiers such as HEKA and Axon *For details, please refer to the catalog available for download in PDF.

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

A patch clamp system that incorporates a patch clamp amplifier, achieving miniaturization and reduction of installation costs, allowing for easy data acquisition and verification.

This is a world-class patch clamp system capable of performing gigaseal recordings, optimal for safety testing/toxicity testing/pharmacological testing/screening of compounds at the cellular level in the functional structural analysis of ion channels, research on related diseases, and drug development processes. ■ No experience with manual patch clamping or difficult operations required ■ No need for microscope/vibration isolation table/manipulator/Faraday cage/puller ■ 20 to 50 data points per day ■ Automation from gigaseal formation to whole cell formation ■ Compatible with voltage-dependent and ligand-dependent channels through pipetting ■ Measurement of action potentials using current clamp is also possible ■ Supports a wide range of applications, enabling rapid assay system development ■ Reduces compound adsorption with borosilicate glass chips

• Other physicochemical equipment
• Analytical Equipment
• Patch clamp system

Direct measurement of transporter currents in a label-free and real-time manner without using fluorescent probes or radiolabeled ligands.

Currently, the mainstream method for evaluating transporter activity is the uptake assay using RI-labeled substrates. However, there are several issues, such as the need for specialized experimental facilities, the complexity of waste liquid treatment, the fact that the desired substrates are not always commercially available as RI-labeled, and the measurement of endpoints after uptake. SURFE²R (Surface Electrogenic Event Reader) technology does not require RI labeling, specialized experimental facilities, or waste liquid treatment, and it allows for real-time evaluation of the activity of transporters (symporters, exchangers, unipoters) and pumps. ■ Direct measurement of transporter currents using Solid Supported Membrane (SSM) ■ Experiments can be conducted using membrane fragments prepared from biological membranes or proteoliposomes reconstituted with the target membrane proteins ■ Light stimulation is possible (optional) ■ An all-in-one device that integrates a dispensing machine, measurement section, and computer ■ 150 data points per day

• Other physicochemical equipment
• Analytical Equipment
• Other Analysis

Direct measurement of transporter currents in a label-free and real-time manner without using fluorescent probes or radiolabeled ligands.

Currently, the mainstream method for evaluating transporter activity is the uptake assay using RI-labeled substrates. However, there are several issues, such as the need for specialized experimental facilities, complicated waste disposal processes, the fact that the desired substrates are not always commercially available as RI-labeled, and that the endpoint is measured after uptake. The SURFE²R (Surface Electrogenic Event Reader) technology does not require RI labeling, does not need specialized experimental facilities or waste disposal, and allows for real-time evaluation of the activity of transporters (symporters, exchangers, unipoters) and pumps. ■ Direct measurement of transporter currents using Solid Supported Membrane (SSM) ■ Experiments can be conducted using membrane fragments prepared from biological membranes or proteoliposomes reconstituted with the target membrane proteins ■ Simultaneous measurement in 96 wells ■ 10,000 data points per day

• Other physicochemical equipment
• Analytical Equipment
• Other Analysis

Easily measure channel activity at the molecular level.

【Measurement Target Examples】 Ion channels (voltage-dependent, ligand-dependent, temperature-sensitive), DNA nanopores, antimicrobial peptides, toxins, etc. In experiments using artificial lipid bilayers, the formation of lipid membranes, reconstitution of membrane proteins, and measurement of single-channel currents can be easily performed. Purified target membrane proteins (such as ion channels in vivo or artificial ion channels) can be reconstituted on artificially formed lipid bilayers, allowing for the evaluation of drug effects and functional/structural analysis. ■ Simultaneous formation and measurement of 4 channels of artificial lipid bilayers is possible ■ Lipid membranes can be formed with just pipetting operations ■ No need for microscope, vibration isolation table, manipulator, or Faraday cage ■ Direct reconstitution of target membrane proteins or membrane fusion with proteoliposomes ■ Temperature control (10–50°C) available (optional) ■ Palm-sized, easy connection via USB

• Other physicochemical equipment
• Analytical Equipment

Easily measure channel activity at the molecular level.

【Measurement Target Examples】 Ion channels (voltage-dependent, ligand-dependent, temperature-sensitive), DNA nanopores, antimicrobial peptides, toxins, etc. Experiments using artificial lipid bilayers allow for easy formation of lipid membranes, reconstitution of membrane proteins, and measurement of single-channel currents. It is possible to reconstitute purified target membrane proteins (such as ion channels found in vivo or artificial ion channels) on artificially formed lipid bilayers for drug action evaluation and functional/structural analysis. By rapidly and automatically forming 16-channel artificial lipid bilayers at once and conducting fully simultaneous measurements, researchers are freed from the burdens of the painting method in experiments using artificial lipid bilayers. ■ Simultaneous formation and measurement of 16-channel artificial lipid bilayers is possible ■ Automatic lipid membrane formation using a stirrer bar ■ No need for microscope, vibration isolation table, manipulator, or Faraday cage ■ Direct reconstitution of target membrane proteins or membrane fusion with proteoliposomes ■ Temperature control available (10–50°C)

• Other physicochemical equipment
• Analytical Equipment

The Langeendorff method has been transformed into the latest high-throughput technology, allowing for the measurement of contractile force in cardiomyocytes under physiological conditions similar to the natural environment of cardiac tissue.

The FLEXcyte 96, which transforms the conventional Langendorff method into the latest high-throughput technology, can measure the contractile force (mN/mm²) of cardiomyocytes for cardiotoxicity and safety evaluation, as well as drug screening, under physiological conditions similar to the native cardiac tissue environment, without missing even slight responses to cytotoxicity, regardless of whether in the chronic or acute phase, simultaneously in 96 wells. ■ Simultaneous measurement in 96 wells ■ Label-free measurement ■ Long-term monitoring possible ■ Optical pacing (optional) ■ Comes with an incubation system (temperature, humidity, CO2 control) ■ Includes multifunctional excellent data analysis and graphing software ■ Validated human iPS cells: iCell, iCell², AXOL CM, Cardiosight-S, MiraCell Cardiomyocytes, etc. ■ Compact desktop size: W20.5 x D18 x H11.7cm / 3.5kg (main unit)

• Other physicochemical equipment
• Other Analysis

Measurement of impedance and extracellular potential of iPS-derived cardiomyocytes.

This is a hybrid cardiotoxicity screening device capable of impedance measurement and extracellular potential measurement similar to MEA. It can detect not only cardiomyocytes but also the minute contractions of cancer cells and liver cells due to the effects of compounds. ■ Simultaneous measurement of impedance and extracellular potential ■ 96-well simultaneous measurement ■ Label-free measurement ■ Long-term monitoring capability ■ Electrical pacing & optical pacing (optional) ■ Comes with an incubation system (temperature, humidity, and CO2 control) ■ Includes multifunctional and excellent data analysis and graph creation software ■ Validated human iPS cells: iCell, iCell², AXOL CM, Cardiosight-S, MiraCell Cardiomyocytes, etc. ■ Compact desktop size: W20.5 x D18 x H11.7cm / 3.5kg (main unit)

• Other physicochemical equipment
• Other Analysis

Label-free and real-time high-throughput cell kinetics measurement is possible.

【Application Examples】 CAR-T cell killing assays, cell proliferation (viability), cytotoxicity (damage), biological barrier function, cell signaling, GPCR measurements, etc. AtlaZ can measure and analyze the impedance changes of cells in up to 6 x 96-well plates in real-time. Since it allows for daily kinetics measurements while remaining in the incubator, a single assay can yield a wealth of data regarding cell responses. Additionally, by changing the measurement frequency range, it can be applied to various applications. ■ Simultaneous measurement of up to 6 x 96-well plates (independent measurements are also possible) ■ Daily kinetics measurements are possible ■ A wide measurement range through frequency range adjustments | Frequency range (0.1 kHz to 100 kHz) ■ Selectable measurement modes (TEER, Cell Monitoring, Cytolysis mode) (Measurements with different functions for each plate are also possible) ■ Management of measurement plates is possible with the included barcode scanner.

• Other physicochemical equipment
• Other Analysis

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely invite you to visit us during this busy time. 【 Exhibition Name 】 Automotive Technology Exhibition 2025 YOKOHAMA https://aee.expo-info.jsae.or.jp/ja/yokohama/ (An "online exhibition" will also be held during and around the event period) 【 Dates 】 May 21 (Wednesday) - 23 (Friday), 2024 10:00 AM - 6:00 PM *On the final day, 9:00 AM - 4:00 PM (Online exhibition: May 14 (Wednesday) - June 4 (Wednesday)) 【 Venue 】 Pacifico Yokohama (1-1-1 Minatomirai, Nishi-ku, Yokohama, Kanagawa Prefecture) Our booth number: "Concourse 505"

We would like to extend our heartfelt congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will showcase a variety of products, including new ones. We sincerely apologize for the inconvenience during your busy schedule, but we would like to invite you to attend this event. 【 Exhibition Name 】 27th INTERPHEX Week Tokyo https://www.interphex.jp/tokyo/ja-jp.html 【 Dates 】 July 9 (Wednesday) - 11 (Friday), 2025 10:00 AM - 5:00 PM 【 Venue 】 Tokyo Big Sight (3-11-1 Ariake, Koto-ku, Tokyo 135-0063)

In this webinar, we will explain "Why packed columns continue to be chosen today" from a practical perspective of gas analysis. We will also introduce the various types and characteristics of packing materials offered by Restek, along with application examples, and share insights on how to make optimal choices based on analytical objectives. Furthermore, we will discuss the differences in hardware passivation techniques and how to differentiate their use, as well as examples of custom packed column designs tailored to specific purposes. Topics covered in the webinar: ✅ Types of packing materials for packed columns and their characteristics ✅ Differences in separation selectivity based on analytical examples for each packing material ✅ Examples of custom packed column designs Benefits: For beginners: You will gain an understanding of separation selectivity based on differences in packing materials and the basics of column selection. For intermediate and advanced users: You will gain a concrete understanding of how to select packing materials and the usefulness of custom packed columns to improve separations that do not satisfy with existing columns. Participant benefits: We will provide a collection of packed column applications that are not publicly available.

Nitto Kohki will exhibit at the "30th Mechanical Components Technology Exhibition [Tokyo]" held at Makuhari Messe Hall 5 from July 9 (Wednesday) to July 11 (Friday). [Booth Number: Hall 5 31-32] At this exhibition, we will showcase a variety of products, including the electric suction hand "e-VEE" with a built-in pump that does not require compressed air, a cordless belt sander, the electric driver "Delvo" that can be mounted on robots, and the "Flow Monitor" that allows for easy visualization of the flow of cooling water in molds and other applications.

In "The Principles of Mixing and Defoaming and Key Points for Recipe Setting," we will explain the mechanism of the self-rotating and orbiting mixer, Awatori Nentaro, and the principles of mixing and defoaming in an easy-to-understand manner for beginners. ◇ Why do materials mix just by combining centrifugal force? ◇ What does it mean that mixing and defoaming can be processed simultaneously? ◇ How do the materials inside the container move during operation? This content is recommended for those who usually use Awatori Nentaro in their work but have never heard about its mechanism or principles and want to learn about it on this occasion. We will also explain temperature management based on material viscosity and considerations for operating conditions with examples. Additionally, in the "Legal Self-Inspection and Basic Maintenance Training," participants will have the opportunity to experience basic maintenance such as round belt replacement and legal self-inspection (regular self-inspection) using actual equipment. The capacity for each seminar is different, so please apply early! ◆ Date and Time: April 24, 2026 (Friday) 13:00 - 16:30 ◆ Venue: Hiroshima Convention Hall