[Online Seminar] "Fail-proof" Monitoring System Practice - From Implementation to Data Utilization (August 19)

An ideal solution for detecting process anomalies during metal cutting with machine tools!

"GEMTP" is a power measurement module suitable for tool and process monitoring to avoid damage to workpieces. It supports 127 types of cycles and can connect to all machine controls via I/O signals. With multiple monitoring strategies (static, dynamic, area), it can be applied to various cutting processes. 【Features】 ■ Single-channel system for drive monitoring ■ Monitoring of tool conditions (breakage, wear, missing) ■ Supports 127 types of cycles ■ Can connect to all machine controls via I/O signals ■ Easy installation in control cabinets *For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Essential for economically efficient production! Introduction of autonomous intelligent tools and process monitoring systems.

We would like to introduce our tool and process monitoring system, 'GEMCPU'. The modular system utilizes all relevant process signals and data from machine tools, reacting in real-time after an event occurs. The system captures digital measurement data via a fieldbus interface or sensors, evaluates the data based on multiple criteria, and visualizes the process transparently. Trend or alarm reports enable users to optimize processes and produce more efficiently. 【Features】 ■ An economical solution even for simple applications ■ Can acquire up to 16 real-time measurement signals on up to 10 NC channels in parallel with the process ■ Virtually no need for troublesome adjustments or re-calibrations of the machine ■ Process signals are recorded and can be monitored online or offline * You can view the English version related link page. * For more details, please refer to the PDF materials or feel free to contact us.

• Other electronic parts

Detects dynamic collisions and damage! Protects machines with a compact design that is easy to install inside control panels.

"GEMAMS" is a collision detection system that detects collisions during the autonomous operation of machine tools and robots using connected acceleration sensors. If the limit of a hard stop (such as an emergency stop) is exceeded, a stop signal is issued within 1 millisecond. This allows for the avoidance or minimization of damage to the machinery. Additionally, we also offer "GEMCMS," which detects collisions during autonomous operation or manual operation using piezoelectric force sensors. 【Features】 ■ 1 to 3-axis acceleration sensors can be connected via IEPE interface (standard specification) ■ All events are stored in event memory ■ Three operation modes ■ Three different limits can be set for each mode ■ Frequency analysis through FT evaluation *For more details, please refer to the PDF document or feel free to contact us.

• Other temperature and humidity measuring instruments

We would like to express our congratulations on the continued prosperity of your esteemed company. Our company will be exhibiting at the following trade show, where we will be showcasing a number of products, including our new product, the Packaging Container Air Leak Test (Pin Hole Inspection) Device | MSQ-2003 series. We sincerely apologize for the inconvenience during your busy schedule, but we would like to cordially invite you to attend this event. 【 Trade Show Name 】 【 Dates 】 【 Venue/Booth Number 】

We will showcase our new product "BLFF," a palletizing foam gripper that weighs only 1.9 kg and measures 350mm×250mm, ideal for bulk picking. We will also introduce various products that cater to different work applications, including durable suction cups and solutions for bag handling. Additionally, we are implementing energy-saving proposals by replacing ejectors to reduce compressed air consumption, which has become a challenge in many industries. If you have any issues with adhesion or transport, please feel free to consult with us at the venue. ■ Lightweight Foam Gripper for Collaborative Robots "CVGC Series" Despite weighing only 1.9 kg, this gripper has a theoretical lifting force of 100 kg, maximizing the payload capacity of collaborative robots. ■ Gripper for Films This gripper is designed to transport thin films gently, minimizing marks left on the surface. By utilizing 3D printing, we can accommodate highly flexible shape designs tailored to specific workpieces and applications. ■ Energy Saving Comparison Panel "Why does a single ejector consume less compressed air compared to a multi-stage ejector?" You can actually verify the differences in compressed air consumption through a comparative display using a flow meter and actual equipment.

We will be exhibiting at Smart Factory JAPAN, held at Tokyo Big Sight from November 18 (Wednesday) to November 20 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that integrate with both products! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Smart Factory JAPAN 2026 Overview ■■ Dates: November 18 (Wednesday), 19 (Thursday), 20 (Friday), 2026 Opening Hours: 10:00 AM - 5:00 PM Venue: Tokyo Big Sight, East Hall 1-3 Our Booth Number: F-20 Registration: Nikkan Kogyo Shimbun 6 Exhibition Joint Site When visiting, please register in advance from your My Page and bring a printed admission ticket. Business meeting requests are also possible, so please make use of this opportunity.

We will be exhibiting at the Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition, held at Marine Messe Fukuoka from December 2 (Wednesday) to December 4 (Friday), 2026. We will introduce the 'Dr. Process Navi Series', 'Dr. Mold Cloud', and AI solutions that help improve efficiency and reform in manufacturing sites! <Introducing the latest solutions that innovate productivity in manufacturing sites!> ● 'Dr. Process Navi' Series ● 'Dr. Mold Cloud' ● 'AI Solutions' For more details, please check the related products. ■■ Overview of the 4th Monozukuri World Fukuoka Design and Manufacturing Solutions Exhibition ■■ Dates: December 4 (Wednesday), 5 (Thursday), 6 (Friday), 2026 Opening hours: 10:00 AM to 5:00 PM Venue: Marine Messe Fukuoka Our booth number: 14-18 When visiting, please register in advance through the dedicated page and bring your printed visitor badge.

[Lecture Topics] 1. Trends and Business Opportunities in Japan's Expanding Energy Storage Industry Koichiro Danno, Principal and Head of Social and Policy Design Unit, Research and Consulting Division, Japan Research Institute, Inc. 1. Background Necessitating Energy Storage Business 2. Behind the Meter (BTM) Business and In Front of the Meter (IFM) Business 3. Trends in Japan's Energy Policy Related to Energy Storage 4. Current Revenue Models in Japan 5. Verification of Profitability in Energy Storage Business 6. Summary 7. Q&A 2. Expansion of Grid-Scale Energy Storage Business in Europe and Japan and Future Prospects Takayuki Ogawa, Executive Officer, Deputy Head of Business Strategy Division, Japan Kogyo Energy Solutions, Inc. and Executive Director, Nippon Koei Energy Europe B.V. 1. Overview of the Company and Introduction to Energy Business 2. Efforts in Energy Storage Business in Europe 3. Efforts in Energy Storage Business in Japan 4. Role and Importance of Aggregators 5. Challenges and Future Prospects of Grid-Scale Energy Storage Business 6. Summary 7. Q&A