Start of distribution of 3D CAD data for Sonia Corporation's ultrasonic spray nozzle.

Atomization of liquid without pressurization by piezo vibration. Enables uniform application while reducing power consumption and liquid waste.

Ultrasonic waves are transmitted to the nozzle through the vibration of piezoelectric ceramics, vibrating the liquid film to form and spray fine particles. It can handle a wide range of liquid flow rates from a minimum of 10 ml/min to a maximum of 100 ml/min, with a nearly constant particle size across the entire flow range. ◆Product Features◆ - Energy-saving as it can supply liquid with low power without pressurizing - Uniform atomization regardless of flow rate - Nearly constant particle size across the entire flow range - Resistant to clogging, ensuring high operational safety - Good coating efficiency due to the slow self-velocity of particles - Maximum flow rate for standard specifications is 100 ml/min - Operating frequency ranges from 20 to 130 kHz (varies by model) - Outer particle size ranges from 11.8 to 42 μm (varies by model) ◆Accessories◆ By using an air transport device, it is possible to freely change the spray shape of the applied fine particles (droplets). ◆Liquid Delivery Pump◆ Precise control is possible by using a syringe pump or similar for liquid delivery. ≪Key Point≫ Demo units are available for loan, so please feel free to contact us. ※※Ultrasonic Cleaning Equipment※※ Sonosis also manufactures and sells ultrasonic cleaning equipment.

• CMP Equipment
• spray
• Coating Machine

Spraying fine particles without pressure! Improving the quality and efficiency of the film formation process!

In the film formation process of semiconductor manufacturing, uniform film thickness and high-quality film formation are required. Particularly in the formation of fine patterns, the particle size of the coating solution and the application accuracy significantly affect product performance. Coating irregularities and contamination can lead to reduced yield and product defects. The ultrasonic spray nozzle from Sonia generates fine particles through the vibration of piezoelectric ceramics, achieving uniform application. It does not require pressurization, suppresses splatter and liquid rebound, and reduces waste of the coating solution. It also contributes to reducing capital investment and running costs. 【Usage Scenarios】 - Application of chemical solutions to wafers - Thin film formation - Photoresist application 【Effects of Implementation】 - Achievement of uniform film thickness - Reduction of waste in coating solution - Improvement of yield - Reduction of capital investment and running costs

• Ultrasonic Oscillator
• nozzle
• valve

Spray fine particles without pressure! Ideal for coating electronic components!

In the electronic components industry, uniformity and precision of coatings are required to enhance product quality and reliability. Particularly in the case of miniaturized electronic components, it is crucial to eliminate waste of coating materials and apply them accurately. Improper coating can lead to deterioration of component performance or failure. The ultrasonic spray nozzle from Sonia Corporation achieves high-quality coatings by uniformly spraying fine particles, contributing to improved yield. 【Application Scenarios】 - Surface protection coating for electronic components - Formation of insulating films on substrates - Moisture and rust prevention treatment for connectors - Precision coating for small components 【Benefits of Implementation】 - Cost reduction through reduced application amounts - Quality improvement through uniform coatings - Capability to handle fine components - Reduction of capital investment and running costs

• Ultrasonic Oscillator
• nozzle
• valve

Maintain the quality of pharmaceuticals with non-pressurized spraying! Reduce waste with fine particle spraying!

In the pharmaceutical industry, uniform dispersion of active ingredients and efficient application are required. Particularly when handling expensive drugs or delicate components, the precision and efficiency of spraying significantly impact product quality and cost. Uneven spraying can lead to variations in effectiveness and degradation of quality. The ultrasonic spray nozzle from Sonia generates fine particles through the vibration of piezoelectric ceramics, achieving uniform spraying. It requires no pressurization, reduces drift and rebound, and minimizes waste of the drug. [Application Scenarios] - Coating of pharmaceuticals - Formulation of inhalation drugs - Cell culture - Spraying of reagents [Effects of Implementation] - Uniform dispersion of drugs - Reduction in drug usage - Improvement in quality - Cost reduction

• Ultrasonic Oscillator
• nozzle
• valve

Spraying fine particles without pressure! Contributing to the finish of painting and cost reduction!

In the automotive industry, it is necessary to apply lubricant when inserting items such as gaskets. With a pressurized nozzle, there can be cases of reduced yield and unnecessary application of lubricant. Particularly, preventing splatter is essential for reducing the amount of lubricant used and improving the working environment. The ultrasonic spray nozzle from Sonia Co. solves these issues by atomizing the lubricant through the vibration of piezo ceramics and spraying it without pressure. [Usage Scenarios] - Part insertion (such as gasket insertion) [Benefits of Implementation] - Suppresses lubricant splatter and reduces usage - Improves application quality through uniform coating - Eliminates the need for large painting booths, reducing capital investment and running costs

• Ultrasonic Oscillator
• nozzle
• valve

Spraying fine particles without pressure! Improving the quality and cost of the film formation process!

In the film formation process of semiconductor manufacturing, uniform film thickness and high-quality film formation are required. Particularly in semiconductor devices with fine structures, the particle size of the coating solution and the uniformity of the application greatly affect the performance of the product. Conventional coating methods often result in liquid splatter and waste, which can lead to decreased yield and increased costs. The ultrasonic spray nozzle from Sonia Corporation addresses these challenges. 【Usage Scenarios】 - Application of chemical solutions to wafers - Thin film formation - Photoresist application 【Benefits of Implementation】 - Uniform film formation due to fine particle size - Reduction of waste in chemical solutions, leading to cost savings - Improved yield by suppressing application irregularities

• Ultrasonic Oscillator
• nozzle
• valve

Spraying fine particles without pressure! Atomization through the vibration of piezoelectric ceramics!! Low power consumption and low energy costs!!

Ultrasonic waves generated by piezoelectric ceramics are transmitted to the spray nozzle (atomizer), where they vibrate the liquid film to create extremely fine particles for spraying. Liquid can be supplied and sprayed into fine particles without the need for pressurization. The flow rate varies depending on the model, but it can accommodate a wide range from a minimum flow rate of 10 ml/min to a maximum of 100 ml/min. Since pressure is not applied to the liquid, there is very little splatter or rebound, eliminating waste of the applied liquid. Additionally, there is no need for a large painting booth. This achieves a reduction in capital investment and running costs. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.

• Ultrasonic Oscillator
• nozzle
• valve

It is a subcutaneous solvent delivery device that can coat evenly and thinly.

Sonia's hypodermic needle spray attachment allows for precise and uniform thin coating, generating high-quality fine particles in a relatively narrow range. It is suitable not only for improving biocompatibility and drug delivery but also for preventing restenosis and thrombosis. It prevents clogging, provides uniform film thickness and density with low-speed application, and reduces wasteful coating. *This product is a dedicated accessory for Sonia's ultrasonic spray nozzle.*

• Ultrasonic Oscillator
• nozzle
• spray

Designed to use fast-reacting liquids and capable of stirring in a short time!

The Sonia dual micro feed tube is designed to use fast-reacting liquids and can be stirred in a short amount of time. The material is stainless steel. The dual micro feed tube has two liquid supply ports, one at the top and the other on the side. *This product is a dedicated accessory for Sonia ultrasonic spray nozzles.*

• nozzle
• others

Air transport fixture for spraying in a square or rectangular shape.

This is an air transport device designed to spray particles from an ultrasonic spray nozzle in a square or rectangular shape. Its main application is for coating purposes. By adding a small amount of gas or air, it applies to square, rectangular, or flat substrates. By adjusting the distance from the workpiece and the pressure of the transport gas or air, various sizes and shapes of spray patterns can be achieved with the ultrasonic spray nozzle manufactured by Sonia. *This product is a dedicated accessory for the ultrasonic spray nozzle made by Sonia.*

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

It precisely sprays fine particles!

The pinpoint air transport fixture generates high-quality, fine particles and can uniformly apply them to medical coatings and other small precision devices. The spray speed is slow, making it suitable for applying expensive chemicals in a thin layer with minimal use. It excels not only in coating and manufacturing applications for medical precision instruments but also in uses such as stent coating and catheter coating, providing excellent reproducibility of spray speed and particle diameter, while significantly reducing the consumption of the coating agent. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia Corporation.*

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

A fixture for spreading wider than a wide-angle air transport fixture.

Dove Tail Spray Shaper The Dove Tail Spray Shaper is an air transport fixture, ideal for wide-angle spraying and flux coating. It can be used with all spray nozzles of NS and WS types. By changing the position of the Dove Tail Spray Shaper, it is possible to switch from a fan-shaped spray pattern to an elliptical spray pattern. *This product is a dedicated accessory for the ultrasonic spray nozzles manufactured by Sonia Corporation.

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

We will achieve a reduction in equipment investment and running costs.

The ultrasonic spray nozzle (atomizer) transmits vibrations from the piezoelectric ceramic, causing the liquid film to vibrate and forming fine particles for spraying. Liquid is supplied without pressure, allowing for the spraying of fine particles. It accommodates a wide range of liquid flow rates from a minimum of 10 milliliters per minute to a maximum of 100 milliliters per minute. Since no pressure is applied to the liquid, there is very little splatter or rebound, eliminating waste of the coating liquid and making large painting booths unnecessary.

• Ultrasonic Oscillator
• nozzle
• Other processing machines

Designed for fluids that have a strong impact on stainless steel, such as pharmaceutical-related applications.

The Sonia Corporation's PTFE fluoropolymer microfeed tube is designed specifically for fluids that have a strong impact on stainless steel, particularly for pharmaceutical-related applications. The liquid must be completely isolated for reasons of hygiene and chemical reactions. *This product is an accessory specifically for Sonia Corporation's ultrasonic spray nozzle.

• nozzle
• Water Hydraulic Equipment
• others

Designed for ultra-low flow rates of 1 ml/min or less.

The stainless steel micro feed tube made by Sonia is designed for extremely low flow rates of less than 1 ml/min. *Of course, it can also be used at flow rates above 1 ml/min. The liquid flows through without touching the tip, which forms a uniform particle size. *This product is an accessory specifically for Sonia's ultrasonic spray nozzle.

• nozzle
• spray
• others

A fixture for applying particles sprayed from an ultrasonic spray nozzle over a wide area.

The wide-angle air transport fixture is a device that uses gas or air to expand the spray angle. The wide-angle air transport fixture can be attached to the Narrow Spray models 60K50T and 130K50T. There is an air supply port on the side of the wide-angle air transport fixture. By injecting gas or air, the gas or air circulates inside, causing the particles sprayed from the ultrasonic spray nozzle to spread and be pushed out. By adjusting the gas volume, air volume, pressure, and the tip of the ultrasonic spray nozzle, a spray angle of up to approximately 100° can be achieved. *This product is a dedicated accessory for the ultrasonic spray nozzle manufactured by Sonia.

• nozzle
• Other physicochemical equipment
• Other surface treatment equipment

Flow spray of 2 mmlit/min or less is possible!

Sonaer low-flow spray nozzle manufactured by Sonia Co. It can focus on small parts without waste by creating micron and sub-micron particles. There are two types of nozzles: flat and wide spray tips. These nozzles are ideal for pinpoint spray shaping, focusing particles and minimizing solution waste. With these nozzles, coating control becomes possible, easily adapting to applications that require thin and uniform application. This nozzle is lightweight, making it attractive for use in robotic coating systems. The nozzle comes in a lightweight black aluminum case (custom-made) or a stainless steel case with a stainless steel inner feed tube. The micro feed tube can be used for microliter capacities and is available in stainless steel and PTFE. The nozzle can utilize a spray shaper for pinpoint spraying, allowing for better control of your coating applications.

• nozzle
• valve
• Etching Equipment

A new challenge with the Sonia Corporation's low-flow ultrasonic spray nozzle!

Low Flow Ultrasonic Spray Nozzle (Atomizer) The low flow spray nozzle (atomizer) manufactured by Sonia is designed to apply droplets (particles) of various viscosities in micron and submicron sizes without over-applying them to small parts. The nozzle shape comes in two types: flat and wide nozzle tips. It is suitable for concentrated application using an ultrasonic spray nozzle and a pinpoint air transport fixture (custom order), as well as for transporting very small droplets (particles). These spray nozzles can be easily applied to applications where coating control and uniform film are required. The spray nozzle is lightweight and ideal for coating systems using robots. The main body of the spray nozzle is made of stainless steel. *Custom micro feed tubes are suitable for low flow application and are available in stainless steel or PTFE fluororesin. The spray nozzle can be equipped with a spray shaper for pinpoint spraying or a wider spray for better coating control. *Micro feed tubes are optional.

• nozzle
• Other machine elements
• Other physicochemical equipment

When it comes to environmental measures on site, many may think of waste reduction and energy conservation. However, there are also issues that can be addressed by reconsidering the materials used daily, such as summer glare, metallic sounds during vehicle operation, burdens from material transportation, and consideration for the surrounding landscape. Hyper CLT mats are wooden lightweight mats made from CLT (Cross Laminated Timber) that is laminated with the wood fibers crossing each other. They can be considered for use in temporary roads, access routes, material yards, heavy machinery work areas, and worker pathways. Wooden mats are characterized by their ability to reduce glare and radiant heat compared to steel plates, and they are also easier to manage in terms of metallic sounds during vehicle operation. The 5×10 version weighs about 230 kg, and the 5×20 version weighs about 460 kg, making them relatively lightweight, which can lead to more efficient relocation and transportation depending on site conditions. Additionally, by utilizing wood, they can be proposed as part of CO₂ fixation and environmental consideration efforts. Hyper CLT mats are registered technologies with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) under the NETIS system. The NETIS registration number is "TH-250021-A". They can also be incorporated into the use of new technologies and creative ideas in public works. Wooden mats, NETIS, civil engineering, CLT, wooden lightweight mats. Environmental measures on site can begin not only with large equipment but also by changing the materials at our feet.

At the "Surface Modification Exhibition 2026" held at Tokyo Big Sight from November 18 (Wednesday) to 20 (Friday), the "Metal-PEEK Direct Bonding Technology," which combines Daicel Mirais's dissimilar material bonding technology "DLAMP" and our PEEK coating "PEEKCOAT," will be showcased. "DLAMP" is a technology that utilizes a special rough surface created by laser processing to firmly bond metal and resin directly without adhesives or fastening components. At this exhibition, you will be able to see samples that have been treated with our high-performance PEEK coating "PEEKCOAT." By imparting the excellent wear resistance, chemical resistance, and insulation properties of PEEK resin, this collaborative solution achieves further high performance and durability of the bonded joints. When you visit, please be sure to stop by the Daicel Mirais booth. We are also available for consultations regarding products and technologies at any time. ■ Exhibition Overview Exhibition Name: Surface Modification Exhibition 2026 Dates: November 18 (Wednesday) to 20 (Friday), 2026 Venue: Tokyo Big Sight Booth Number: East Hall 2 H-28 (within the Daicel Mirais booth) * "DLAMP" is a registered trademark of Daicel Mirais Co., Ltd.

As it gets colder, construction sites become more prone to wet surfaces due to morning dew, frost, and rain. When water or mud adheres to the surface of steel plates, there is a risk of workers' shoes slipping or vehicle tires spinning. This is where we would like to consider the wooden mat "Hyper CLT Mat" made from CLT (Cross Laminated Timber). The surface of the wood has a different texture compared to metal plates, making it a viable option for preventing slips on walkways and vehicle paths. By laying it down on temporary roads, delivery routes, heavy machinery work yards, material yards, and worker pathways, it reduces the area where workers walk directly on mud or gravel, making it easier to level uneven ground. The 5×10 mat weighs about 230 kg, and the 5×20 mat weighs about 460 kg, making them relatively lightweight and easy to install, remove, or relocate depending on site conditions. The Hyper CLT Mat is a technology registered with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) under the NETIS system. The NETIS registration number is "TH-250021-A." It can also be incorporated into winter safety measures, the use of new technologies, and environmentally conscious proposals. Wooden mats, NETIS, civil engineering, CLT, lightweight wooden mats. Given the cold season at the site, why not reconsider safety measures from the ground up?

In construction and civil engineering sites, not only the task of transporting heavy materials but also walking multiple times within the site and standing for long periods can put a strain on workers' feet and backs. One solution to consider is the wooden mat "Hyper CLT Mat" made from CLT. By laying it down in worker pathways, temporary roads, access routes, and material yards, it reduces the area where workers walk directly on mud or gravel, making it easier to secure stable movement paths. Wooden mats have a different texture compared to metal steel plates, which helps to minimize the hard sensation and metallic sounds when walking. They also help to reduce glare and radiant heat during the summer, contributing to an improved working environment. The 5×10 mat weighs approximately 230 kg, and the 5×20 mat weighs about 460 kg, making them relatively lightweight and easy to install, remove, or relocate depending on site conditions. The Hyper CLT Mat is a technology registered with the Ministry of Land, Infrastructure, Transport and Tourism (MLIT) under the NETIS system. The registration number is "TH-250021-A." It can also be incorporated into proposals for utilizing new technologies, improving construction environments, and considering environmental aspects. Wooden mats, NETIS, civil engineering, CLT, lightweight wooden mats. Improving the ground underfoot supports the daily lives of workers. The Hyper CLT Mat proposes a site design that takes workers into consideration.

CyberLink has optimized its AI facial recognition engine "FaceMe SDK" for the Intel Core Ultra Series 3 processor. By leveraging Intel's integrated GPU (iGPU) and OpenVINO, it has achieved approximately 20 times the facial recognition processing speed compared to CPU processing on the same processor, and about 37 times faster compared to traditional 12th generation Intel Core processors. Furthermore, our verification results confirmed that the AI facial recognition system "FaceMe Security" can simultaneously process video from up to 59 cameras with a single mini PC. This optimization allows for the construction of a high-performance facial recognition system on compact devices without relying on large workstations equipped with dedicated GPUs, thereby supporting companies in the implementation of edge AI and the addition of facial recognition capabilities to existing facilities. 【Key Features】 - Achieves fast AI facial recognition without the need for a dedicated GPU - Can simultaneously process video from up to 59 cameras with a single mini PC - Contributes to reducing hardware costs and installation space - Supports a wide range of applications such as security monitoring and access control *Performance figures are based on our verification results.