Added silicone adhesive and sealant "TSE382" to AD-Chemi.

We propose silicone adhesives, potting materials, and encapsulants that can also be used for conventional general-purpose devices requiring heat dissipation.

Adachi New Industry, as a distributor for Momentive, offers various silicone solutions for thermal management. 【1】Thermal Gap Filler Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. It is liquid and can be automatically applied using a dispenser. This silicone is ideal for customers facing issues with stress relief and thermal control. 【2】Thermal Silicone Adhesive With excellent thermal conductivity and physical/chemical stability, it allows for thin film application, effectively reducing thermal resistance. It is optimal as a thermal interface adjacent to heating elements, heat spreaders, and heat sinks. 【3】Thermal Potting Compound Silicone sealants exhibit thermal conductivity and contribute to the long-term reliability of devices that generate heat. We offer a range of materials that cure into soft rubber or gel-like forms, including low to medium viscosity products suitable for potting applications. 【4】Thermal Silicone Grease Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. Its ability to be applied as a thin film significantly reduces thermal resistance.

• Rubber
• Other polymer materials

Controlling the bubbles changes the quality.

Adachi New Industry, as a distributor for Momentive, offers various silicone products with defoaming effects. Silicone defoamers exhibit high defoaming effectiveness in small amounts, efficiently suppressing the generation and persistence of foam. They excel in heat resistance, chemical resistance, and chemical stability, making them suitable for a wide range of fields such as food processing, chemical industry, and paint and ink manufacturing. They also have good dispersibility in liquids, contributing to process stabilization and quality improvement. 1. Strong effects in small amounts, providing high economic efficiency. 2. Harmless to the human body (low affinity for organic substances). 3. Proposals tailored to specific issues, including fast-acting and long-lasting types. 4. Compliant with "standards for food additives" for food use. We will provide optimal suggestions based on your application, so please feel free to contact us.

• Other polymer materials

This is a thin film coating agent designed to protect electronic printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion.

Adachi New Industry, as a special distributor for Momentive, offers various silicone products for electrical and electronic components. ◆◆What is a conformal coating? It is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion, such as moisture, humidity, and corrosive substances. The application methods include dip, spray, and flow coating, with a typical thickness of around 10 to 200 micrometers. ◆◆Features 1) The most notable feature is that it is a "solvent-free product." 2) It cures quickly at room temperature. 3) It is a reduced product of low molecular siloxane. 4) It has excellent cold and heat resistance. 5) It is a product that can be stored at room temperature. 6) It shows good adhesion to various materials. 7) It has no corrosiveness to metals. 8) The application state can be easily checked under black light.

• Rubber
• Other polymer materials

It is an adhesive that is expected to have strong adhesion to materials such as silicone rubber and foam.

Momentive's silicone pressure-sensitive adhesive is a solution of polysiloxane gum and resin dissolved in toluene, containing approximately 61% silicone solids, and can be further diluted with aromatic, aliphatic, or chlorinated solvents. By blending the two components, it exhibits exceptionally high adhesive performance on low surface energy materials such as silicone rubber and silicone foam. The combination of the adhesive and additives is expected to be used as a coating on film and fabric substrates in the manufacture of industrial pressure-sensitive tapes. Additionally, it demonstrates excellent peel strength on silicone rubber and silicone foam substrates and can be adjusted according to the formulation ratio and recipe. For detailed specifications, please refer to the catalog.

• Other polymer materials

We have started accepting inquiries for demonstrations and on-site evaluations of the non-contact, camera-less monitoring sensor "MotionCatch" for factory and worksite break rooms, overnight rooms, and solo workspaces. **Features of MotionCatch:** - Detects human movement non-contact using millimeter-wave radar and AI. - No cameras used and zero video recording. Provides privacy-conscious monitoring. - Palm-sized. Simply install on walls or ceilings without the need for wiring (USB powered, Wi-Fi). - The detection range of one unit is approximately 6m x 4m. It is suitable for monitoring "room units" rather than entire floors. We envision installation in rooms where placing cameras is difficult, such as break rooms, rest areas, overnight rooms, and solo workspaces. We are accepting inquiries for demo units, on-site evaluations, and confirmation of installation conditions. *Note: No video is recorded. This product is designed to assist monitoring and is not a medical device.*

When considering creativity and ingenuity in public works, it is important not only to think about "what was used," but also "what issues at the site were addressed by its adoption." Hyper CLT sheets are civil engineering materials that utilize wood CLT. By laying them in areas such as worker pathways, rest areas, access routes, and material yards, they can address site-specific challenges such as heat reflection in summer, noise reduction, improvement of work flow, and environmental considerations. Additionally, they can be proposed from perspectives different from traditional steel plates, such as CO2 fixation through wood and consideration for the landscape. There is also the option to use them partially in specific areas where effectiveness is desired, rather than implementing them throughout the entire site. Hyper CLT sheets are registered as a technology with the Ministry of Land, Infrastructure, Transport and Tourism under NETIS as "TH-250021-A." They can be utilized in civil engineering projects that aim to concretely demonstrate unique creativity and ingenuity by combining NETIS, new technologies, and wood utilization.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding methods for repairs can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Waterworks Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for metal crack repairs without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

Metal cracks are one of the concerns in equipment maintenance operations. Conventional welding repair methods can change the base material around the crack due to heat, leading to residual stress and deformation, which always carries the risk of "crack recurrence" and "secondary damage." Hinode Water Supply Equipment Co., Ltd.'s "Mechanical Stitching Method" is a new technique that allows for the repair of metal cracks without applying heat. By using special bolts and reinforcement plates, the crack is physically removed without affecting the base material at all. Repairs can be made even in environments where open flames cannot be used. Since no heat is applied, the disassembly of equipment is minimized. For more details, please contact us or download the catalog.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.