Footwear measures to reduce the risk of slipping on rainy days | Hyper CLT flooring

When it rains, the pathways at construction sites quickly become muddy, and puddles and ruts also form. The risk of workers tripping or slipping increases as they walk on the mud. Hyper CLT boards are lightweight wooden boards that utilize CLT. By laying them down in worker pathways, access routes, and material storage areas, the area where workers walk directly on the muddy ground can be reduced, providing a solution for foot safety during rainy weather. The 5×10 board weighs about 230 kg, making it relatively lightweight, and depending on site conditions, it can be easily installed, removed, or relocated. It can also be considered for repositioning as needed based on construction progress and weather conditions. However, laying wooden boards does not guarantee that they will be slip-resistant. It is important to check for slopes, puddles, mud, seams, and shifts, and to perform necessary measures such as securing, draining, and cleaning as needed. The Hyper CLT board is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS program, designated as "TH-250021-A." With NETIS, civil engineering, CLT, and lightweight wooden boards as new options, it supports the creation of safe work sites on rainy days.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (2.5 Gigabit Ethernet): 1 port ● HDMI 2.1 (TMDS): 1 port ● USB 3.2 Type-A: 3 ports ● 10-pin GPIO: 1 port ● Power input: 12V DC * This model does not include an operating system.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 48GB ● Onboard UFS storage: up to 256GB ● 2.5GbE (Intel Ethernet Controller I226-IT): 2 ports ● USB 3.2 Type-A: 2 ports ● USB 3.2 Gen 2x2 Type-C: 1 port ● 40-pin GPIO: 1 port ● HDMI 2.1 (TMDS): 2 ports ● DisplayPort 1.4a: via USB Type-C ×1 ● RS-232/422/485 serial ports: 2 ports ● M.2 2230 E-Key: 1 slot ● M.2 2280 M-Key: 1 slot ● M.2 2242 M-Key: 1 slot ● Equipped with TPM 2.0 (Trusted Platform Module) ● Input power: DC 12–24V * This model does not come with an operating system.

Features: ● Equipped with Intel Core Processor (Series 3) ● Onboard LPDDR5 memory: up to 24GB ● Onboard UFS storage: up to 256GB ● 2.5GbE LAN port ×1 ● HDMI 2.1 (TMDS) ×1 ● USB 3.2 Type-A ports ×3 ● DC input: 12V / 5A ● M.2 2230 E-Key slot ×1 ● 10-pin GPIO ×1 * This model does not come with an operating system.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.