[Online, Individual 30 Minutes] We are accepting technical consultations on 3D measurement and appearance inspection (schedules can be adjusted to your preference).

From one photo. I will return the measurable image and the areas that cannot be measured. We will discuss the cost after seeing the results.

Can our work be measured? For engineers, equipment managers, and purchasing personnel who want to know this first. Before the estimate, we will answer whether it can be measured or not. First, just one photo. A photo taken with a smartphone is fine. Please include three things: material, size, and what you want to see. If there is potential, we will take the actual item and compare measurements using multiple methods. You can request just the initial stage on a small scale. After seeing the results, you can decide whether to continue or stop. 【Features】 ■ The process consists of four stages. What you receive is determined at each stage. ■ Choose from seven methods and compare measurements using the same actual item. ■ We will report the areas that cannot be measured and the reasons for it. ■ Drawings and photos can be shared after a non-disclosure agreement. ■ If off-the-shelf products are sufficient, we will let you know. ■ An engineer will listen to you from the very beginning.

• Contract Analysis
• Contract measurement
• Contract Inspection

We will identify the reasons why the off-the-shelf 3D sensor could not measure and compare measurements using seven different methods to choose the best one.

We have tried off-the-shelf 3D sensors, but they miss points, have white out areas, and are rough. For those in production technology and quality assurance with such challenges, we will identify the reasons for measurement failures with real objects and develop suitable measurement methods. The reasons for measurement failures are often related to how light reflects. Shiny objects appear white out, transparent objects show the back surface, and black objects do not reflect light. Our company does not decide on a method in advance; instead, we measure and compare the same real object using multiple methods. 【Features】 - We select candidates from seven methods and compare measurements with real objects to choose the best one. - We address shadows and white out areas by increasing the number and direction of light and eyes. - We will document the areas and reasons for measurement failures in the initial report. - If it is possible to utilize your current sensors, we will inform you. - We also accept inquiries about measuring without spraying.

• 3D measuring device
• Contract measurement
• Image Processing Equipment

You can consult us with just one photo. If 3D is not needed, we will let you know.

We want to replace visual inspection with machines for quality assurance and manufacturing. Color and scratches are assessed in 2D, shape in 3D, and judgment is made by AI. We will develop a testing system that combines only what is necessary, tailored to the actual product. The reason why automation of visual inspection often fails is usually due to the way images are captured. Defects that are not visible cannot be detected by AI. Before using AI, we will explore the light and angles that reveal defects. 【Features】 - We will first determine the method of capturing images that reveals defects and inform you about defects that will not be visible. - We will assess dents and depressions not by "whether they exist" but by "how deep they are." - If switching lighting is sufficient, we will not use 3D. - We will also consider configurations that add height while retaining the current 2D inspection. - The criteria for over-detection and missed detections will be jointly established using actual good and defective products.

• Visual Inspection Equipment
• Defect Inspection Equipment
• Image Processing Equipment

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

Features: ● Equipped with Intel N series processors (N250/N150) ● Fanless design ● Ultra-thin compact chassis (30mm thick) ● Supports DDR5 memory ● Dual display output ● Dual Gigabit LAN ● Abundant M.2 expansion slots ● Equipped with TPM 2.0 * This model comes without memory, storage, and OS.

Features: ● Equipped with Intel Core Processor Series 2 ● Space-saving design of 150 × 270 × 225mm ● Supports ECC-compatible DDR5 memory ● Abundant storage configurations ● Dual 5G/4G communication expansion support ● Compatible with NVIDIA RTX PRO 4000 Blackwell SFF ● Flexible PCIe expansion ● Wide power input for industrial applications ● Operating temperature range of -20℃ to 45℃ ● Standard TPM 2.0 included * This model does not include memory, storage, or OS.

Product Features: ● Compatible with Intel Processor Core 3 and N series ● DDR5 SODIMM ×1 (up to 32GB) (sold separately) ● VGA ×1 + HDMI ×2 ● LAN ×4 (IEEE 802.3 at/af PoE compatible, total 80W) ● 9V to 36V DC input (with protection circuit) ● Wide temperature range -20℃ to 60℃ ● Onboard TPM 2.0

Hotron, which manufactures and sells sensors, provides bed exit sensors for hospitals, nursing, and care facilities. Hotron offers easy-to-understand video guidance on how to use the bed exit sensors wirelessly and how to set up device connections! ▼ Video Manual (YouTube) https://www.youtube.com/playlist?list=PLNVA4mTrZDqtJa6MfFRZQxwtfCSnAfxVy 【Bed Exit Sensors】 ○ Non-contact infrared sensor, simply place it - Pole-kun HB-H1 ○ Mat sensor, foldable thin mat - Mat-kun HB-UST ○ Body movement call - Ugo-kun HB-TV3 ○ Body movement call for wheelchairs - Ayumi-chan HB-WTV3 【Options】 ○ Nurse call linked wireless set - Wireless set (transmitter/receiver) HB-RS/HB-RJ ◎ For more information about the products, please contact us or download the catalog.