Added heat dissipation grease "TIG1500" to AD-Chemi.

This is a thin film coating agent designed to protect electronic printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion.

Adachi New Industry, as a special distributor for Momentive, offers various silicone products for electrical and electronic components. ◆◆What is a conformal coating? It is a thin film coating agent designed to protect electronic and printed circuit boards (PCBs). It protects substrates and components from mechanical and environmental corrosion, such as moisture, humidity, and corrosive substances. The application methods include dip, spray, and flow coating, with a typical thickness of around 10 to 200 micrometers. ◆◆Features 1) The most notable feature is that it is a "solvent-free product." 2) It cures quickly at room temperature. 3) It is a reduced product of low molecular siloxane. 4) It has excellent cold and heat resistance. 5) It is a product that can be stored at room temperature. 6) It shows good adhesion to various materials. 7) It has no corrosiveness to metals. 8) The application state can be easily checked under black light.

• Rubber
• Other polymer materials

It is an adhesive that is expected to have strong adhesion to materials such as silicone rubber and foam.

Momentive's silicone pressure-sensitive adhesive is a solution of polysiloxane gum and resin dissolved in toluene, containing approximately 61% silicone solids, and can be further diluted with aromatic, aliphatic, or chlorinated solvents. By blending the two components, it exhibits exceptionally high adhesive performance on low surface energy materials such as silicone rubber and silicone foam. The combination of the adhesive and additives is expected to be used as a coating on film and fabric substrates in the manufacture of industrial pressure-sensitive tapes. Additionally, it demonstrates excellent peel strength on silicone rubber and silicone foam substrates and can be adjusted according to the formulation ratio and recipe. For detailed specifications, please refer to the catalog.

• Other polymer materials

We propose silicone adhesives, potting materials, and encapsulants that can also be used for conventional general-purpose devices requiring heat dissipation.

Adachi New Industry, as a distributor for Momentive, offers various silicone solutions for thermal management. 【1】Thermal Gap Filler Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. It is liquid and can be automatically applied using a dispenser. This silicone is ideal for customers facing issues with stress relief and thermal control. 【2】Thermal Silicone Adhesive With excellent thermal conductivity and physical/chemical stability, it allows for thin film application, effectively reducing thermal resistance. It is optimal as a thermal interface adjacent to heating elements, heat spreaders, and heat sinks. 【3】Thermal Potting Compound Silicone sealants exhibit thermal conductivity and contribute to the long-term reliability of devices that generate heat. We offer a range of materials that cure into soft rubber or gel-like forms, including low to medium viscosity products suitable for potting applications. 【4】Thermal Silicone Grease Exhibiting thermal conductivity, it contributes to the long-term reliability of devices that generate heat. Its ability to be applied as a thin film significantly reduces thermal resistance.

• Rubber
• Other polymer materials

Fukuda Co., Ltd., which develops, manufactures, and sells leak testing equipment to inspect airtightness and sealing performance, provides a technical document that clearly explains the methods and theories of airtight testing, titled "Technical Manual." We are offering it as a PDF file. Please take this opportunity to download and view it!

● What is a packaging container air leak test device? It is a leak testing device that identifies the peeling, tearing, and presence of pinholes in packaging containers for pharmaceuticals and other products, conducting a Container Closure Integrity Test (CCIT). It can be applied to a wide variety of packaging containers, including flexible packaging, bottle containers, and glass containers, primarily in pharmaceutical packaging. The measurement method employs the <sealed chamber method (pressure change leak testing method 1)>. A sample is placed in the chamber, and by applying pressure or vacuum and measuring the pressure change within the chamber, quantitative inspection is performed. It can be used in various scenarios, including offline manufacturing, inline manufacturing, CMC laboratories, quality control laboratories, and stability testing. * The containers subject to inspection are referred to as "work" or "samples." Here, specific samples are referred to as "samples" to differentiate the terminology.

The pinhole inspection for packaging engineering is fully automated, eliminating packaging defects based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the pinhole inspection process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process, achieving quantitative quality assurance - Slim and space-saving design that can be connected to existing production lines - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Fully domestically produced, allowing for rapid maintenance and troubleshooting - Example target works: pillow packaging, packaged rice (packaged cooked rice), etc. *Please consult us regarding the use of this product for pharmaceuticals.

In construction work, it is important not only to focus on the building itself but also to create a safe environment for construction vehicles and workers to move around. The Hyper CLT plywood is a lightweight wooden board that utilizes CLT. It can be used as temporary materials to support temporary roads, material delivery routes, heavy machinery work yards, material storage areas, and worker pathways, rather than as structural materials for buildings. The 5×10 board weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, or relocate depending on site conditions. This allows for the boards to be moved in accordance with the progress of the construction, making it easier to effectively utilize limited space. Additionally, the natural texture of the wood blends well with construction sites in residential areas and around public facilities, contributing to considerations for metal noise and summer heat reflection. The Hyper CLT plywood is a registered technology under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS system, designated as "TH-250021-A." It can be incorporated into highly public construction projects and exterior and earthworks, promoting the use of new technologies and environmental considerations. Wooden plywood, NETIS, civil engineering, CLT, lightweight wooden boards. A new option for temporary materials using wood is available for construction sites.

● The production time for casting prototypes can be shortened! Since model production is not required, the time needed to create prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or variations in dimensions, can be molded at the same time in a single molding process. This allows for the verification of multiple types in a short period.