A game changer in grinding and polishing automation! Leaving no 3K jobs for the next generation. Solving the shortage of skilled workers. Building a polishing robot system that equips robots with human-like sensory capabilities through high-speed autonomous correction control of contact force!

Automation of the artisan's techniques (polishing, grinding) and hazardous tasks that have been given up until now, with high-speed autonomous control and contact force control. Dramatic improvements are expected in the end effector.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by instantaneously extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the equipment and the robot's trajectory, thereby enhancing processing speed and improving cycle times. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and retraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, since it automatically corrects the tool load affected by gravity changes due to the robot's angle, it maintains a uniform contact pressure from any angle, enabling a finish without processing inconsistencies.

• Articulated Robot

Automate the skilled techniques of experienced workers. Uniformly control the polishing process with high-speed automatic correction of contact force for complete automation. Gravity load is also corrected! Dramatically improve productivity with robots.

The AOK400 series orbital sander kit, a robot sanding unit utilizing the unique ACT technology developed by FerRobotics Compliant Robot Technology GmbH. It can also be applied to polishing with disk replacement. Seeing is believing! Please check our website or YouTube (FerRobotics) for example application videos. The sanding and buffing (polishing) processes, which have been considered difficult to automate, can now achieve complete automation with perfect control of the pressing force, regardless of the dimensions of the workpiece or the angle of contact. Each parameter, including rotation speed, pressing force, and feed rate, can be individually controlled to achieve the best finish, operating 24 hours a day. The AOK400 series is ideal for small items. Benefits: - Applicable for repair polishing after clear coating, dramatically improving cycle time and efficiency. - Avoids the risk of vibration-related issues through automation. - Reduces the risk of factory shutdown due to unforeseen circumstances.

• Inspection robot

FerRobotics creates a new standard for polishing automation! Complete automation of polishing the roof joint area of automotive bodies with pressure correction control.

Complete control of pressing force with our high-speed automatic correction end effector using ACT technology. Users share success stories in the video. A picture is worth a thousand words! Please check our application example videos on our website or YouTube (FerRobotics) below. The complete automation of grinding finishes after welding/brazing at the roof joint of automobiles significantly improves finishing quality!! It also greatly contributes to labor savings!! The most important factor for high-quality post-processing is fine and smooth grinding. The better the polishing finish, the higher the quality of the finish, perfectly matching the demands of high-end products. Full automation with ASK enables the highest quality and best finish. ■ Benefits: - High-speed autonomous correction control of pressing force increases the robot's trajectory speed, dramatically improving productivity and cycle time for grinding and brushing. - Maintains a high level of quality, allowing for 24/7 grinding. - High-speed autonomous correction control of pressing force reduces the consumption of consumables, leading to cost savings. - Avoids the risk of vibration-related issues due to automation. - High ROI (return on investment) allows for early recovery of capital investment.

• Welding robot

An end effector that enables automation systems for high-speed processing and high-quality finishing of skilled techniques (polishing, grinding) and hazardous tasks that have been given up until now.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) generated during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it instantly and automatically compensates for changes in dimensional tolerances, curved shapes, and non-flat surfaces by rapidly adjusting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the equipment and the robot's trajectory, thereby improving processing speed and cycle time. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and contraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, it automatically compensates for tool load variations caused by gravity due to the robot's angle, ensuring a consistent contact pressure from any angle and enabling a finish without processing inconsistencies.

• Articulated Robot

We will not leave 3K jobs to the next generation of children. We will eliminate the shortage of skilled workers. Robot polishing that gives robots human-like senses through high-speed autonomous correction control of contact force.

FerRobotics' Active Compliant Technology automatically corrects the "difference" in contact pressure (force) that occurs during polishing and grinding processes, which require skilled techniques, at high speed. This technology allows for consistent polishing/grinding at the set contact force, unaffected by variations in processing speed or gravitational load differences due to angles. With the end effector (ACF) utilizing ACT technology, it quickly and automatically adjusts to changes in the dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece by rapidly extending and retracting the stroke, maintaining contact with the workpiece at the set force. This technology can increase the speed of the device or robot's trajectory, thereby enhancing processing speed and improving cycle time. Additionally, in robotic polishing and grinding, the ACF controls the contact pressure through the extension and retraction of its stroke, eliminating the need to move the heavy robot arm for corrections, which further assists in improving the processing speed of robotic polishing. Furthermore, it automatically corrects the tool load affected by gravity changes due to the robot's angle, ensuring a consistent contact pressure from any angle, enabling a finish without processing inconsistencies.

• Welding robot

Automation of weld bead removal using artisan techniques. Instant automatic correction control of the most important pressure (applied force) for polishing, processing with uniform pressure. Reduction of cycle time.

Orbital polishing kit using the unique ACT technology developed by FerRobotics Compliant Robot Technology GmbH. ACT automatically corrects the "difference" in contact pressure (force) that occurs during processing in polishing and grinding operations, which require skilled techniques, in response to dimensional tolerances, curved shapes, and non-flat surfaces of the workpiece, at high speed. It also automatically corrects gravitational loads, allowing for consistent polishing/grinding with the set pressing force. This technology can increase the speed at which devices and robots move along their trajectories, thereby improving processing speed and cycle time. Additionally, in robotic polishing and grinding, the control of pressing pressure is achieved through the expansion and contraction of the ACF itself, eliminating the need to move the heavy robot arm for correction, which further assists in improving the processing speed of robotic polishing. Furthermore, it automatically corrects tool loads due to gravitational changes based on the robot's angle, ensuring a consistent pressing pressure from any angle and enabling a finish without processing irregularities. Seeing is believing! Please check our website or YouTube (FerRobotics) for example application videos.

• Articulated Robot

We have added a new **"Glossary"** to the Hyper CLT sheet website. In the civil engineering and construction industries, there are many specialized terms such as "CLT," "NETIS," "temporary roads," and "wooden lightweight sheets." Therefore, we have introduced related terms in an easy-to-understand manner so that those who are encountering Hyper CLT sheets for the first time can understand the products and technologies. Hyper CLT sheets are wooden lightweight sheets for civil engineering that utilize wood CLT and are registered under the Ministry of Land, Infrastructure, Transport and Tourism's NETIS technology as **"TH-250021-A."** We hope that by not only conveying the features of the product but also sharing the underlying technologies and terminology, users will feel a closer connection to Hyper CLT sheets. We will continue to enhance our website and provide clear information related to wood, NETIS, civil engineering, and CLT.

Hotron Inc. has launched its new product, the "Vehicle Count Sensor CCS3"! This product is a ceiling-mounted sensor that combines infrared and radar technology. It reliably detects vehicles in both directions with a single unit, accommodating traffic during congestion and vehicle passing, thus achieving efficient occupancy management in large parking lots. Additionally, it can be utilized for exit warning purposes in addition to vehicle counting, contributing to the safe and smooth operation of parking facilities. 'Features' - Improved detection performance against changes in road surface during rainy weather by using both infrared and radar. - Equipped with IP67 waterproof and dustproof performance, making it effective even in salt damage areas. - Various settings can be configured from a dedicated app (for Android devices), with current settings easily understandable at a glance. - The base dimensions are the same as the previous model "CCS2," allowing for smooth replacement of existing equipment. *For more details, please refer to the product information, catalog download, or contact us.*

On September 15, 2026, we issued a press release regarding the wooden lightweight sheet "Hyper CLT Sheet." The Hyper CLT Sheet is a civil engineering sheet that utilizes CLT (Cross-Laminated Timber) stacked in an orthogonal direction. It can be used in various locations such as temporary roads, access routes, heavy machinery work yards, and material storage areas. The 5×10 version weighs approximately 230 kg, making it relatively lightweight and easy to install, remove, and relocate. Additionally, it offers environmental benefits such as reducing glare and metallic sounds typical of wood, as well as CO2 fixation. Furthermore, it can be proposed for the use of new technologies in public works as a **registered technology with the Ministry of Land, Infrastructure, Transport and Tourism "TH-250021-A."** Through this press release, we aim to expand the new wooden lightweight sheet that combines wood, NETIS, civil engineering, and CLT to more construction sites.

● The production time for cast prototypes can be shortened! Since model making is not required, the production time for prototypes, which previously took about a month, can be significantly reduced. ● Model costs can be reduced! By directly producing sand molds from 3D data, there is no need for model production costs. If changes to the model are necessary, they can be addressed by modifying the 3D data. ● Similar products with different shapes and dimensions can be prototyped simultaneously! Different products, such as similar shapes or varying dimensions, can be molded at the same time in one molding process. This allows for the verification of multiple types in a short period.

The "HA-T Series" is an energy-saving automatic door sensor that opens only for those who wish to enter, whether on a busy street or in a narrow passageway. The automatic door opens simply by bringing your hand close, addressing hygiene concerns even in facilities used by a large number of people. You can choose between "Non-vision Mount Type/HA-T401" and "Non-vision Built-in Type/HA-T520" depending on the application and installation location. 【Recommended for such places!】 ☑ Entrance facing a busy corridor ☑ Presence of counters or signs near the door ☑ Buildings facing narrow passages ☑ Buildings that prioritize aesthetics ☑ Hospitals and facilities that consider hygiene ☑ Large facilities with many doors 【Features】 ● Adaptable to various door types with four detection spot settings ● Reduces unnecessary opening and closing, contributing to energy-saving by minimizing wasteful power consumption ● Equipped with a light touch function, allowing the door to open and close just by waving your hand, ensuring hygiene ● Can also be used as a wide detection range non-vision infrared sensor ◎ For more details, please download the materials or contact us.