Radiates mid-infrared close to the absorption wavelength of water.
Features of CFLH-40 1. Emits mid-infrared radiation close to the water absorption wavelength When the heating element temperature is set to 700°C, the peak wavelength of the emitted energy is approximately 3μm, making it ideal for heating water droplets, aqueous solutions, and other hydrated compounds. 2. Optimal for resin heating As it is a carbon fiber heating element derived from polymer compounds, it excels in heating resins. 3. Fast startup Reaches 80% in just 2.7 seconds and 100% in 8.5 seconds. 4. Flexible lighting direction Due to the use of flexible materials for the heating element, it can be processed into line-type or ring-type shapes. The heating element itself is lightweight and can be oriented vertically, horizontally, or diagonally without restriction. Moreover, it also boasts excellent impact resistance.
Inquire About This Product
basic information
ModelLength of MirrorVoltage-PowerNet Price (Excluding Tax) CFLH-40/PL/L140/200V-320W120mm200V-320W CFLH-40/PL/L240/200V-630W240mm200V-630W CFLH-40/PL/L320/200V-630W320mm200V-630W
Price range
Delivery Time
Applications/Examples of results
Drying of 300mm silicon wafers after precision cleaning Drying after printed circuit board cleaning Drying of automotive paint Drying of water-based paint Drying of water-based ink Drying of seaweed Drying of seafood Frost removal in cold storage Heat source for heat shrink tunnel Glass preheating treatment Heat source for drying oven Heat source for thermal deformation measurement of printed circuit boards Defrosting of cold storage shutters Reduction of drying time for coaters Small batch drying of resin pellets Annealing treatment of SIC wafers Drying of temporary adhesive Acceleration of dehydration baking Preheating of chuck holders Heat source for pre-bake of resist film Heat source for post-exposure bake (PEB) Heat source for post-bake Drying of robotic cleaning machines Preheating of printed circuit boards in reflow soldering baths Heat shrink of cups Final heating of bread Drying of dried meat Drying of granules 125°C heat resistance test for automotive printed circuit boards Heat shrink of wire terminals Drying treatment of metal-containing factory wastewater
Detailed information
-
Drying of 300mm silicon wafers after precision cleaning Issues There was no good heater to rapidly evaporate water droplets on the silicon wafers. ⇒ Improvement Point Dried the wafers by irradiating with a carbon line heater (CFLH) using mid-infrared. Since the absorption wavelength is compatible, the water droplets evaporated immediately. This led to a reduction in takt time.
-
Drying after cleaning printed circuit boards Issues I was looking for a low-temperature heater that is easy to manage for temperature control to prevent heat damage. ⇒ Improvement Points I dried the boards by irradiating them with a carbon line heater (CFLH) using mid-infrared radiation. Since the absorption wavelength is suitable, the water droplets evaporated quickly. Being a low-temperature heater, it helped prevent heat damage.
-
Drying of Water-Based Paint Issues I was looking for a heater that does not emit ultraviolet rays for sunburn prevention. ⇒ Improvement Points I used a Carbon Line Heater (CFLH) to irradiate with medium infrared for drying. Since there are no ultraviolet components, it served as a countermeasure. The absorption wavelength is suitable, so the water droplets evaporated quickly.
-
Drying of Automotive Paint Issues I was looking for a low-temperature heater that is easy to manage for temperature control to prevent heat damage. ⇒ Improvement Points I used a carbon line heater (CFLH) to irradiate with mid-infrared for drying. Since the absorption wavelength is suitable, the water droplets evaporated quickly. As it is a low-temperature heater, it helped prevent heat damage.
-
Drying of Water-Based Ink Issues In order to prevent sunburn, I was looking for a heater that does not emit ultraviolet rays. ⇒ Improvement Points I used a carbon line heater (CFLH) to irradiate with mid-infrared for drying. Since there are no ultraviolet components, it served as a solution. The absorption wavelength is compatible, so the water droplets evaporated immediately.
-
Drying of Seaweed Issues In order to preserve flavor, we were looking for a low-temperature heater that is easy to manage temperature-wise. ⇒ Improvement Points We dried the seaweed by irradiating it with mid-infrared using a Carbon Line Heater (CFLH). Since the absorption wavelength is compatible, moisture evaporated quickly. Being a low-temperature heater, it did not reach high temperatures, making color management easier.
-
De-icing of Frozen Warehouses Issues I was looking for an efficient de-icing heater. ⇒ Improvement Points De-icing was performed by irradiating with a carbon line heater (CFLH) emitting mid-infrared rays. Since the absorption wavelength is suitable for ice, the frost sublimated directly without turning into water.
-
Heat source for shrink tunnels Issues I was looking for a low-temperature heater that is easy to manage temperature. ⇒ Improvement point Heated by irradiating mid-infrared with a carbon line heater CFLH. Since the absorption wavelength is compatible, the resin shrank immediately.
-
Glass preheating treatment Issues I was looking for a small far-infrared heater. ⇒ Improvement points I heated it by irradiating with a carbon line heater CFLH that emits mid-infrared. Since the absorption wavelength is compatible, the glass heated up quickly.
Line up（3）
| Model number | overview |
|---|---|
| CFLH-40/PL/L140/200V-320W | |
| CFLH-40/PL/L240/200V-630W | |
| CFLH-40/PL/L320/200V-630W |
catalog（1）
Download All Catalogs
Company information
5 reasons that HEATTECH is selected 1. The rich selection of 5 principles and 71 types. Air Blow heater , Near-infrared, Middle-infrared, Far-infrared, and UV heater From the 71 types of products based on the 5 principles of heating system, we will propose the best heater. 2. 9 series 88 types of heater controllers． Manual, Automatic, Speed proportional, Remote control, IOT compliant, Noncontact heating control, One-shot heating, Multistage heating, etc. We propose the optimal heater controller from the multifunctional products. 3. Construction method study materials We have published a number of technical documentation online seminars. 4. Sense of security of verification before introduction. Test piece, test laboratory, in user can verify before introduction. 5. Low-budget one-stop introduction To introduce in testing way, the laboratory kit which gathered something necessary was prepared. : Member of the Kobe Chamber of Commerce and Industry : Member of the Society of Material Science Japan : Member of the Society of Thermophysical Properties Japan : Member of the Japan External Trade Organization Trade Tie-up Promotion Program
