It can heat a small φ5 point up to 1350℃.
The small φ5 point can be heated up to 1350°C. The HPH-35 is a halogen point heater that concentrates the light from a halogen lamp to achieve high-temperature heating. When heating a thermocouple with a 110W lamp, the temperature rises to about 1350°C at a focal distance of 15mm. The heating temperature varies depending on the type of object being heated. Temperature control can be achieved through irradiation time control or voltage control. It has become possible to heat in narrow spaces that could only be addressed by optical fibers or lasers in the past. Compared to fiber optic heating and laser heating methods, it offers overwhelming efficiency, being more than 10 times higher, along with lower costs, energy savings, and safety. There are no restrictions on the direction of illumination, allowing for use while moving. *Please ensure that shock prevention measures are taken, as significant impact will occur when mounting movable parts during stops.
Inquire About This Product
basic information
Outer diameter Φ35 For details, please check the website below: https://www.heat-tech.biz/products-hph/hph-ss/1349.html
Price range
Delivery Time
Applications/Examples of results
Heat source for thermal power generation test system Drying of printed materials Sintering of ceramics Removal of surface tension in pipe hole processing Preheating for bending processing Shrinkage of heat shrink tubing Molding of multilayer polymer films Resin welding Sintering of carbon nanotubes Point heating and drying of sealants Performance testing of heat-resistant metals Synthesis of ceramics Photothermal source for concentrating CVD heating furnace Drying after applying pre-cure sealant Metal analysis in incinerated waste High-temperature light sterilization of spatulas Infrared thermal riveting of resin bosses Distortion testing through partial heating of precision parts Heating of samples using linear accelerators and X-ray lasers Synthesis of metal fine powder bonding materials Auxiliary heat source for friction stir welding Synthesis of CFRP inside nozzles Melting of borosilicate glass tubes Sintering of silicon carbide (SiC) Caramelization of sugar Heating processing with dual-arm robots High-temperature dynamic property testing of rocks Prototype of diamond quantum sensors Development of crystal structures in magnetic materials Synthesis of alloy particles Thermal expansion evaluation of semiconductors Thermal expansion evaluation of special alloys Heat treatment of gemstones Selection of heat sources suitable for measuring thermal diffusivity of metal materials Simple temperature simulation for aircraft engines Local quenching treatment of precision mechanical parts Overheating resistance testing of lithium-ion batteries
Detailed information
-
Soldering of Printed Circuit Boards Issues I was struggling because there was no good method for lead-free soldering. ⇒ Points of Improvement I used a small spot halogen point heater for soldering. The heating and cooling times are short, and temperature control is easy, so the soldering went well. Since it is spot heating, thermal stress on other components was minimized. Furthermore, because it is non-contact, defects caused by residual solder were eliminated.
catalog（1）
Download All Catalogs
Company information
5 reasons that HEATTECH is selected 1. The rich selection of 5 principles and 71 types. Air Blow heater , Near-infrared, Middle-infrared, Far-infrared, and UV heater From the 71 types of products based on the 5 principles of heating system, we will propose the best heater. 2. 9 series 88 types of heater controllers． Manual, Automatic, Speed proportional, Remote control, IOT compliant, Noncontact heating control, One-shot heating, Multistage heating, etc. We propose the optimal heater controller from the multifunctional products. 3. Construction method study materials We have published a number of technical documentation online seminars. 4. Sense of security of verification before introduction. Test piece, test laboratory, in user can verify before introduction. 5. Low-budget one-stop introduction To introduce in testing way, the laboratory kit which gathered something necessary was prepared. : Member of the Kobe Chamber of Commerce and Industry : Member of the Society of Material Science Japan : Member of the Society of Thermophysical Properties Japan : Member of the Japan External Trade Organization Trade Tie-up Promotion Program
![[Case Study] Oil Heating (Fryer Manufacturer)](https://image.mono.ipros.com/public/product/image/e7c/2000583355/IPROS43149422566206510312.png?w=280&h=280)
