What is compressor drain oil-water separation? [Basic Knowledge]

basic information

■Is the white cloudy drain a cause for concern?! In the oil from the drain, in addition to the oil floating on the water's surface, there is also emulsified (emulsion) oil that is mixed with water in fine particles. A white cloudy drain may not be adequately treated with standard adsorbents, and there are devices available that use specialized adsorbents designed for emulsified oil. ■Mechanism of the treatment device 1. Oil-absorbing material: Fibers that adsorb oil, which first remove the oil content. 2. Activated carbon: Adsorbs the remaining oil content to finish the process. There are devices that process in two stages, and some have a structure that allows natural drainage without using power. Some products claim to be able to treat oil concentrations up to 500 mg/L, and the treatment range is determined for each product. ■Adsorbents decrease with use There is a limit to the amount of oil that adsorbents can capture. The time until replacement varies depending on the compressor's operating time and the concentration of oil in the drain. The higher the oil concentration, the quicker the replacement will be. For example, in one product, with operation for 8 hours a day on the 22nd of the month and a drain discharge rate of 4.0 L/hour, the replacement guideline is approximately 2,128 hours at 200 ppm and about 1,418 hours at 300 ppm.

Price range

Delivery Time

Applications/Examples of results

■Does the amount of drain increase in summer? Warm air can hold more water vapor, so generally, the amount of drain increases during the hot and humid summer months. Even with the same compressor, the amount of drain flowing into the treatment system varies by season. ■How clean is the treated water? Oil-water separation devices can reduce the oil content in treated water (n-hexane extractable substances) to below 5 mg/L. National wastewater standards also set the limit for mineral oils at 5 mg/L, applicable to specific facilities that discharge into public water bodies, particularly factories with an average daily discharge of 50 cubic meters or more. When discharging into the sewer system, separate sewer discharge standards apply. In some regions, local regulations may impose stricter standards or additional requirements. ■What should you look for when choosing a device? 1. Oil concentration: Each device has guidelines for the inflow oil concentration it can handle. 2. Presence of turbidity: Drains with advanced emulsification may require specialized adsorbents. 3. Standards for discharge destination: Verify local regulations in addition to national standards. As long as the compressor is running, drain will continue to be produced. Our company offers consultations on wastewater treatment, including drain management. Please feel free to reach out to us.