List of Electronic Components products
- classification：Electronic Components
856～900 item / All 27411 items
Achieves high collection efficiency through electrostatic methods. Offers a wide range of products from large to small sizes. Also compatible with water-soluble oil mist.
- air conditioning
Implementing intrinsic safety explosion-proof technology in hazardous locations at a low cost!
- isolator
Flexible substrates that are essential from smartphones to high-speed communication devices. From the basics of LCP-FCCL to low dielectric and multilayer FPC formation processes.
- Printed Circuit Board
- Other electronic parts
- Technical Seminar
A specific low-power transceiver that allows hands-free simultaneous calls like a phone for up to two people, ideal for collaborative work at construction sites and factories.
- AC adapter
- Other network tools
- cable
Easy real-time measurement of trace gases at ppb levels! Natural atmosphere can be used as carrier gas.
- Sensors
- Analytical Equipment and Devices
Compliant with JRA and IEC standards! It can be used for 15 years without replacing the sensor!
- Sensors
- Safety Sensors
Gas sensors that respond to gases! Meeting various customer expectations such as high sensitivity, high precision, simplicity, and reliability!
- Sensors
- Safety Sensors
- Other environmental analysis equipment
Fast start‑up, high durability hydrogen detector proven in mass‑produced FCVs
- Sensors
- Safety Sensors
- Hydrogen battery
44mm square, maximum stroke of 120µm, high-precision nanopositioner with 0.2nm resolution.
- Piezoelectric Devices
- Actuator
- encoder
Achieved high-speed beam steering with a convergence of ±5 mrad × 3 ms and a resolution of 0.1 µrad.
- Other industrial robots
- Actuator
- Piezoelectric Devices
High-performance matrix switcher with 8K VRR support and HDMI 2.1 sound (eARC) extractor.
- converter
- Image Transmission Equipment
Even without an eARC-compatible TV, you can connect eARC-compatible soundbars and speakers!
- converter
- Image Transmission Equipment
Connection issues with HDMI devices! Supports 4K60 and 600 Mcsc.
- converter
- Image Transmission Equipment
Troubles with EDID over HDMI! 40 selectable EDID modes! EDID emulator and PnP emulator.
- converter
Introducing small coil data with a return spring torque of 0.0055 to 0.009 N·m!
- Solenoid Actuators
Introduction of a platform for pressure sensors and thermopiles! Introduction of our handling manufacturers.
- Pressure Sensor
- Sensors
- Flow Sensor
This is a service that investigates the causes of power supply issues in electronic circuit boards experiencing malfunctions and proposes countermeasures.
- power supply
- Circuit board design and manufacturing
- Other contract services
[Reduction of manpower and efficiency in on-site operations] Ventilation and air blowing / drying / removal of dust, heat, and humidity / condensation prevention
- fan
- Ventilation and Exhaust
- Other quality control systems
Early detection of tiny scratches and play in bearings (bearings) with patented technology! An overwhelmingly low-cost predictive maintenance sensor that does not require expensive dedicated machines.
- Other electronic parts
![[V-P01] Smooth and Stable Control H...](https://image.mono.ipros.com/public/product/image/311014/IPROS12823750345560713736.jpg?w=280&h=280){kind=small}
XY stage supporting high-speed and high-precision experiments.
- Other machine elements
- Cartesian Robot
- encoder
XY stage contributing to the efficiency and accuracy improvement of calibration work.
- Other machine elements
- Cartesian Robot
- encoder
XY stage that improves the precision and efficiency of lens adjustment.
- Other machine elements
- Cartesian Robot
- encoder
In the laser processing cutting process. Achieving high-precision positioning and high-speed movement.
- Other machine elements
- Cartesian Robot
- encoder
High-speed and high-precision wafer inspection is achieved by V-P01.
- Other machine elements
- Cartesian Robot
- encoder
For high-precision positioning in optical applications. Compact size, 10 nm resolution, self-locking when powered off.
- Linear motor
- Piezoelectric Devices
- Actuator
We will exhibit at the International Medical Imaging Exhibition (ITEM2026) with MRI room-compatible LED Magluminas, emergency lighting, high-brightness LED Cathex, and more.
- EMC countermeasure products
- LED lighting
- LED
Guaranteeing safe and effective functionality for a wide range of applications! A select switch with a sophisticated design.
- switch
- switch
Supports a complete measurement chain with sensors, data collection, and analysis software!
- Sensors
- Sensors
Corresponds to ultra-fine shapes of around 0.2μm. For medical device parts, microneedles, micro lenses, etc.
- power supply
- lens
- Dissection probes/needles
4-mode multi-protocol compatible! Embedded reader/writer
- Other electronic parts
4-mode multi-protocol compatible! Integrated antenna reader-writer module.
- Other electronic parts
Low voltage, low power consumption operation, HID (USB) connection reader/writer with built-in antenna. It can be used without a user application!
- Other electronic parts
Moldless lost-wax casting "Digital Cast" and metal 3D printing "Digital Sinter," what is the optimal solution for your needs?
- Machine elements
- Other electronic parts
- gear
Achieve high stability with a distortion-free aluminum base! High specifications unique to German manufacturing!
- Actuator
- Cartesian Robot
- encoder
Enhancing the accuracy of research and development! Introduction to a special feature on "positioning" products for research environments.
Under strict standards and environments, high precision and reproducibility are required in research and development. At PI, we have been engaged in the development and manufacturing of components, systems, and solutions that can be smoothly integrated into existing experimental environments, backed by over 50 years of experience. With compatibility with major software such as LabVIEW, MATLAB, and Python, as well as an open interface, smooth integration into various research environments and flexible customization are possible. We have picked up a lineup of recommended products for implementation in research settings.
16-bit resolution, 1MHz conversion rate DA converter unit (Digital to Analog Conversion) with USB interface!
- Other electronic parts
[New Product] High-Resolution High-Speed DA Converter Unit (USB Connection) 'TUSB-0416DAM'
This unit is a USB interface DA converter unit with a resolution of 16 bits and a conversion rate of 1 MHz. The analog output has four channels with BNC connectors, and in addition to high-resolution DC voltage output, it can continuously output waveforms without limitation by combining FIFO memory with the USB interface. It can also be used as a variable reference voltage source, function generator, or arbitrary waveform generator.
USB interface high-speed DA converter unit (Resolution: 14bit Conversion rate: 1MHz)
- converter
[New Product] USB Interface High-Speed DA Converter Unit (Resolution: 14bit Conversion Rate: 1MHz) 'TUSB-0214DAM' Now Available!
This unit is a USB interface DA converter with a resolution of 14 bits and a conversion rate of 1 MHz. The analog output is available through 2 channels of BNC connectors, allowing for continuous waveform output without limitation in combination with FIFO memory and USB, in addition to high-resolution DC voltage output. It can also be used as a variable reference voltage source, function generator, arbitrary waveform generator, etc. Please note that this product is a cost-effective version of the TUSB-0416DAM.
I can understand the differences between tin plating, silver plating, and nickel plating.
- transformer
The participation in the JECAFAIR 2026 Electrical Industry Exhibition has been confirmed.
We have decided to exhibit at "JECAFAIR 2026 Electric Construction Industry Exhibition," which will be held at Tokyo Big Sight from May 27 (Wednesday) to May 29 (Friday). We will be exhibiting right at the entrance of booth number 1-54 in Hall 1 East. On the final day, our on-site workers, who process 150 tons of copper busbars annually, will share insights about the characteristics of copper, the challenges of processing, and information that only those on-site would know during the exhibitor seminar! For more details, please visit the official website! We sincerely look forward to your visit!
It is used for measuring distortions, temperature, pressure, vibrations, and other factors of structures.
- Other measurement, recording and measuring instruments
- Sensors
A microwave process that achieves high-speed, internal, and selective heating. A systematic explanation from its principles to measures against thermal runaway and hotspots, equipment design, and prac...
- microwave oven
- High frequency/microwave parts
- Technical Seminar
Small yet high precision! Accuracy 3/10000 (non-linearity, hysteresis, repeatability) Compact tension and compression dual-purpose load cell.
- Sensors
- Sensors
Utilizing lost-wax technology that handles various materials. Leave the prototypes aimed at weight reduction to us!
- Other industrial robots
- Other machine elements
- Other electronic parts
I was involved in the production of the "touchable" model of Kencho-ji Temple in Kamakura City.
The "touchable" model of Kenchoji Temple was conceived by the Universal Picture Book Library UniLeaf (represented by Toshie Oshima, located in Hayama, Kanagawa Prefecture) with the concept of allowing visually impaired individuals to feel historical buildings with their hands, enabling them to share the excitement of travel together. Subsequently, it received support from many donors through grants from the "Support Each Other Fund" and crowdfunding, leading to its production. To realize the concept of feeling historical buildings by touch, a 1/50 scale miniature of the Kenchoji Temple Buddha Hall was meticulously recreated in bronze, paying close attention to detail. Our company was responsible for the production of the castings, which consist of approximately 30 parts. This in-house technology utilizes a casting method called "Digital Cast," which excels in producing unique, one-of-a-kind items without the need for mold fabrication. The model has been permanently installed in front of the Kenchoji Temple Buddha Hall since the day after the ceremony, allowing visitors to touch it freely. If you visit Kenchoji Temple in Kamakura, please take a look. [Manufacturing Responsible] Prototype resin model production and casting machining: JMC Corporation Casting (moldless casting "Digital Cast"): Castem Corporation
No machining is required for the production of ultra-small pin nozzles. Precision metal parts are manufactured using "MIM," which also accommodates medical device components.
- nozzle
- Piezoelectric Devices
- High frequency/microwave parts
Castem Co., Ltd. will exhibit simultaneously at the Manufacturing World Nagoya, Mechanical Elements Technology Exhibition, and Next-Generation 3D Printer Exhibition.
The "Monozukuri World Nagoya" will be held at Port Messe Nagoya from April 8 (Wednesday) to April 10 (Friday), 2026, where we will exhibit simultaneously at the "Mechanical Components Technology Exhibition" and the "Next Generation 3D Printer Exhibition." "We have high cutting costs for complex shapes," and "We cannot decide on mass production methods after prototyping"... We will showcase optimal solutions for customers troubled by prototyping and mass production of metal parts. If you are struggling with selecting methods for mass-produced items or reducing costs, please visit the "Mechanical Components Technology Exhibition." If you are having difficulties with single-item or one-off production, please come to the "Next Generation 3D Printer Exhibition." We sincerely look forward to your visit. 【Exhibition Overview】 ■ Event Name: Monozukuri World Nagoya ■ Dates: April 8 (Wednesday) to April 10 (Friday), 2026, 10:00 AM to 5:00 PM ■ Venue: Port Messe Nagoya (2-2 Kinjo-futo, Minato Ward, Nagoya) ■ Exhibition Content and Booth Numbers: Lost wax precision casting, MIM (casting demonstrations included) ➔ Mechanical Components Technology Exhibition… Hall 1, Booth 7-9 Mold-less casting digital cast ➔ Next Generation 3D Printer Exhibition… Hall 1, Booth 12-10
- Other electronic parts