Coating Product List and Ranking from 568 Manufacturers, Suppliers and Companies

Substrate protection coating: Performance, safety, and environmental considerations prioritized in design; non-hazardous materials.

Since it is not a hazardous material, explosion-proof equipment is not required / hazardous material storage is not needed. Organic solvents are not applicable, reducing management items. It has low odor and can be dried at room temperature only, so drying equipment is not necessary.

The "FloroSurf FG-3650 Series" conformal coating agent for electronic circuit boards is designed with a high moisture resistance of 4 to 10 times that of other resins, prioritizing safety and environmental preservation. It does not use regulated substances such as those under the Fire Service Act, Industrial Safety and Health Act, or PFAS regulations, and it has low odor, ensuring a safe and pleasant workplace environment. This coating agent is ideal for waterproofing and insulating protection of electronic components, as well as moisture and waterproofing of mounted circuit boards. 【Features】 ■ Non-flammable and low-odor liquid for safe use. → FloroSurf FG-3650 is non-flammable and low in toxicity, exempt from PRTR and Fire Service Act regulations. It is also not classified as an organic solvent under the Industrial Safety and Health Act. ■ Higher moisture and waterproofing performance compared to other resins! → It has four times the moisture resistance of urethane and acrylic systems, and ten times that of silicone systems. Its thin film allows for weight reduction, making it suitable for mobile circuit boards, automotive circuit boards, and aircraft circuit boards. ■ Resistant to acidic substances such as lithium battery electrolytes! → It can protect circuit boards during electrolyte leakage, preventing fire accidents. *If you would like a free sample and technical booklet, please include "Sample Request" or "Booklet Request" in your inquiry.

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water-soluble release agent for transparent resin - transparent resin without cloudiness - non-transferable upon drying.

Reduce molding defects of resin, rubber, and transparent parts! Improve productivity with continuous release.

Our water-soluble release agent solves issues such as poor release performance through its overwhelming continuous release capability. Additionally, it contributes to improved productivity by minimizing cloudiness of the workpiece during the molding of transparent resins such as polycarbonate. Furthermore, the thickness of the release agent film is at the nanometer level, allowing for faithful reproduction of the mold's surface precision. Being water-based, it does not generate VOCs and poses no fire hazards, making it easy to manage and environmentally friendly. Moreover, although it is a fluorine-based release agent, it does not contain regulated substances such as PFOA, PFOS, or PFHxS. 【Application Scenarios】 - Molding of transparent components such as lens parts - Molding of interior parts like dashboards, door trims, and console boxes - Molding of complex-shaped parts or parts with high design aesthetics - Compatibility with various resin materials such as urethane, ABS, and PP 【Benefits of Implementation】 - Improved yield due to reduced release failures and workpiece cloudiness - Reduced frequency of mold maintenance - Cost reduction through increased productivity - Stable supply of high-quality interior parts

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Spray release agent "Mold Free" high-performance release, free of regulated substances.

Please use this as an alternative to the discontinued fluorine-based release agents! It provides enhanced release properties. Free of regulated substances.

A high-performance fluorine-based release agent with proven results in various fields, "Fluorosurf," has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued by other companies. MF-5095 is a high-performance product that surpasses past aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This is limited to corporate clients. It cannot be used for applications involving food contact or medical purposes.)

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Release agent spray "Mold Free" high-performance release agent, free of regulated substances.

Please use this as a substitute for the discontinued fluorinated release agent! It provides enhanced release properties. Free of regulated substances.

The fluorine-based release agent "Fluorosurf," which has a proven track record in various fields, has been made into an aerosol. It can be easily applied on-site and exhibits excellent release properties after air-drying at room temperature. Additionally, it can be used as a substitute for release agents that have been discontinued from other manufacturers' fluorine-based products. MF-5095 is a high-performance product that surpasses previous aerosol release agents. Furthermore, this product does not contain regulated substances (PFOA, PFOS, PFHxS). *If you would like a sample for use, please include "Sample Request" in your inquiry. (This offer is limited to corporate clients. It cannot be used for applications involving food contact or medical use.)

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulation coating, high insulation properties, high moisture resistance, room temperature drying, non-flammable.

A high insulation and high water-repellent fluorine coating protects printed circuit boards and electronic components from moisture and humidity. Non-flammable and highly safe. Easy application with short-term room temperature drying.

The insulation coating agent FluoroSurf FG-3650 series is a specially designed coating agent for waterproofing and insulation protection of electronic components, as well as for moisture and waterproofing of mounted circuit boards. It has four times the moisture resistance compared to urethane and acrylic-based board coatings, and exhibits protective functions such as insulation, moisture resistance, saltwater resistance, water resistance, acid resistance, resistance to lithium battery electrolyte, and water and oil repellency, all while contributing to weight reduction. It can be applied using a dispenser or spray, and the application is completed in 5-10 minutes with room temperature drying! It is non-flammable and not subject to fire safety laws, nor is it classified as an organic solvent under safety regulations, significantly reducing on-site management items and equipment costs. *We offer free samples to those who request them (limited to corporations). If you would like a free sample, please include "Sample Request" in your inquiry. *We sincerely apologize, but our products are industrial chemical products, and we cannot provide samples for personal use (in cases without corporate status), medical use, or applications involving contact with food.

Company：フロロテクノロジー
Price：Other

Coating Agent
Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Must-see for automobile manufacturers] Tire coating 'T-Cure Shine'

Increase the added value of automobiles and motorcycles! Ideal for new businesses such as regular maintenance at car dealerships and tire manufacturers & retailers!

"T-Cure Shine" is a new era coating treatment technology that gives tires shine and luster while protecting them from scratches and dirt. Traditionally, tire aesthetics relied on tire wax and similar products, but their effects were temporary and required frequent reapplication. However, "T-Cure Shine," developed by Hirakata Giken, uses a urethane resin for coating, eliminating the need for reapplication and providing a shine and luster that lasts longer than ever before. 【Features】 ● Long-lasting shine ● Protects tires from UV rays and scratches ● Easy maintenance; just rinse with a sponge and water even if dirty *For more details, please download the catalog and contact us. For coating services beyond tires, please consult our company representative.

Company：枚方技研
Price：Other

Resin processing machine
Coating Agent
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Anti-corrosion and anti-rust coating

Extending the lifespan of the substrate and improving its durability is possible! It boasts high heat resistance among plastic resins and also has good chemical resistance.

Our "Anti-corrosion and Anti-rust Coating" solves problems such as "wanting to prevent rust and deterioration of metal substrates (work)" and "wanting to extend the lifespan of the substrate." Basically, treatment with a thick film is possible. A thick coating significantly increases the maintainability of the substrate, leading to an extension of its lifespan and improvement in durability. "Nylon (PA)" has been used by manufacturers of piping, factory equipment parts, and seawater tanks, while "Low-Density Polyethylene (LDPE)" has been utilized by manufacturers of piping for construction, outdoor products, and fire hydrant covers. [Features] ■ Treatment with a thick film is generally possible ■ A thick coating significantly increases the maintainability of the substrate ■ Leads to an extension of the substrate's lifespan and improvement in durability ■ Relatively easy to repeat (resin stripping and regeneration) coating ■ Material with excellent toughness and wear resistance *For more details, please refer to the PDF document or feel free to contact us.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CVD (Chemical Vapor Deposition) coating refers to.

Functional ceramic films of various types are coated in single or multiple layers using the thermal chemical vapor deposition method, enhancing the performance of the material with the resulting high hardness and high adhesion ceramic films.

CVD coating refers to Chemical Vapor Deposition coating, which is a chemical film formation method. In a state of atmospheric pressure to medium vacuum (100 to 10^-1 Pa), gaseous raw materials are introduced, and energy such as heat, plasma, or light is applied to excite and promote chemical reactions to synthesize thin films or fine particles. These are then adsorbed and deposited on the surface of a substrate, chemically coating it with ultra-hard ceramic compounds. By using thermal chemical vapor deposition, various functional ceramic films are coated in single or multiple layers at high temperatures (900 to 1100°C), significantly enhancing the performance of the material with the resulting high hardness and high adhesion ceramic films. Functions of CVD coating include: slip resistance, chemical resistance, heat resistance, water and oil repellency, hydrophilicity, wear resistance, electrical properties, and dimensional stability.

Company：みのる産業
Price：Other

Plasma surface treatment equipment
Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

From small items to large works, leave the blasting process to us.

If it is only for blasting treatment, we can accommodate substrates up to about 10 meters, so please feel free to contact us.

Blast processing refers to a method of surface treatment that creates small bumps and roughens the surface by spraying or colliding powdered materials, fine balls, or sharp-edged balls. It is often simply called "blast." Depending on the purpose, there are various techniques and processing methods for blasting, such as polishing, striking, roughening, stripping, shaving, engraving, and cleaning. It is an essential treatment for coatings to enhance the adhesion of paint films. Sandblasting Sandblasting is a blasting method that uses compressed air from a compressor as the acceleration energy for particles, and when people refer to blasting, they often mean this sandblasting. Shot blasting This method involves rotating a wheel and using centrifugal force to accelerate and project particles. Wet blasting This is a wet blasting method that accelerates and sprays a mixture of water and abrasive material (slurry) using compressed air. Applications of blast processing Rust removal, paint stripping, oxide film removal, polishing, and burr removal.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is PTFE, a fluororesin? Surface treatment by Minoru Sangyo Co., Ltd.

When referring to fluororesins, it often means PTFE, which has the highest production and usage among fluororesins.

What is PTFE resin? PTFE (Polytetrafluoroethylene) is known in Japanese as tetrafluoroethylene resin. It is a fluororesin (fluorocarbon resin) composed solely of fluorine and carbon, and is inert to most chemical agents and solvents. It is sometimes referred to as Teflon. When talking about fluororesins, PTFE is often the reference point, as it has the highest production and usage volume among fluororesins. Characteristics of PTFE resin PTFE resin possesses excellent electrical properties, non-stick characteristics, and lubricity, making it expected to be used in a wide range of fields such as chemistry, electricity, machinery, and space development. The fluorine coating on household frying pans is just one example of utilizing the non-stick and heat-resistant properties of fluororesins to make food less likely to stick to the pan. Properties of PTFE resin By imparting various properties of fluororesins (such as excellent non-stick, water-repellent, and slippery characteristics, resistance to chemicals, and high heat resistance) to the surface of materials, it is possible to prevent sticking and adhesion, reduce friction, and protect the materials. Additionally, there are other types such as PFA, FEP, and ETFE.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

What is PFA, a fluororesin? Surface treatment by Minoru Sangyo Co., Ltd.

PFA was developed to improve the processability of PTFE. It can maintain stable mechanical strength at temperatures ranging from -200°C to 260°C.

Characteristics of PFA Heat Resistance It has a maximum continuous use temperature of 260°C, making it one of the highest heat-resistant materials compared to other resins, and it also demonstrates resistance at extremely low temperatures of -196°C. Chemical Resistance It is stable against strong acids, strong alkalis, and organic solvents, and does not degrade. Therefore, it is used in various components in the semiconductor field, which handles highly polar chemicals. Electrical Insulation It possesses high electrical insulation properties, with a low dielectric constant compared to various resins. Even when compared to ETFE, which is also a fluoropolymer, PFA shows a lower dielectric constant. Low Friction (Slipperiness and Non-Stick) It has a very low coefficient of friction, making it slippery. The dynamic friction coefficient of PFA is 0.2, compared to 0.4 for ETFE, which is also a fluoropolymer. Weather Resistance (UV Resistance) Fluoropolymers are hardly affected by oxidation from oxygen and chemicals in the atmosphere, allowing them to maintain their strength for over 30 years without degradation.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Add water and oil repellency with a fluororesin coating.

Water and oil repellency refers to the property of a substrate surface that repels water and oil. Water does not spread and wet the surface of the material, but instead forms into droplets, which is the state of water repellency.

When a water-repellent coating is applied to fibers, it is coated with a thin film and does not cover all the fabric's weave, which is an advantage in terms of breathability. However, when high pressure is applied to the water, it may seep through the fabric's weave to the backside. The difference between water-repellent and waterproof To briefly explain the difference between water-repellent and waterproof, water-repellent means repelling water as described above, while waterproof means not allowing water to pass through. In other words, a state where water does not pass through is "waterproof," and a state where water is repelled on the surface is "water-repellent." Advantages and disadvantages of water-repellent processing - Advantages The advantage of water-repellent processing is that it does not fill the gaps in the material, allowing for breathability. Therefore, it is often used in down jackets and coats when one wants to avoid getting wet from a small amount of rain without compromising comfort. - Disadvantages Since water-repellent processing is only superficial, as mentioned above, during heavy rain, water pressure may cause water to seep into the material's interior.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Non-adhesive coating to prevent fingerprint adhesion in medical settings.

It is a non-stick coating that protects the product from fingerprints and blood stains. The water-repellent coating also protects the product and helps prevent a decline in product functionality.

Anti-fouling and non-stick coating Non-stick coating film types Fluororesin Silicone Features of non-stick and water-repellent coatings Used to improve the release properties of jigs and prevent sticking, as well as for anti-fouling purposes. Also used to prevent the deterioration of product functionality caused by the adhesion of fingerprints, blood, and chemicals. Additionally, there are coatings that serve the role of water-repellent coatings, which prevent functional deterioration, freezing, and corrosion due to the adhesion of water droplets and solvents.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrostatic coating is powder coating by Minoru Sangyo Co., Ltd.

Electrostatic painting is a coating method that uses the power of static electricity to apply paint, as the name suggests.

◆Features of Electrostatic Coating Due to the force of static electricity, the paint is attracted to the object, allowing for efficient adhesion (high coating efficiency). Additionally, because the paint moves along electric field lines, it can be applied not only to the front of the spray gun but also to areas that are wrapped around and corners where compressed air has no escape, which is a characteristic of this method. The drawbacks include the tendency for paint to concentrate on convex areas where the electric field is concentrated, and there may be instances where paint adheres unexpectedly far away. Moreover, since high voltage is used, it is necessary to be cautious of electric shock accidents and the risk of fire. ◆Advantages of Electrostatic Coating 1. Easier to achieve a uniform paint film Because the paint is attracted by static electricity, it can be sprayed widely, allowing for relatively uniform adhesion of the paint. Adjusting the nozzle opening reduces the likelihood of uneven spraying, making it easier to obtain a uniform paint film. 2. Less paint loss In conventional spray painting, paint that misses the object or does not reach it becomes waste. In electrostatic coating, the proportion of paint that is attracted due to adhesion increases, which is expected to reduce paint loss.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Advantages of Powder Coating - Minoru Sangyo Co., Ltd.

A cost-effective painting method that is attracting attention now, with minimal impact on the environment and human health, and with strengthened efforts towards environmental conservation and health promotion.

Because it does not use any organic solvents commonly used in painting, it has a minimal impact on the environment and human health, and it is attracting attention in the current efforts to enhance environmental conservation and health promotion. Additionally, it excels in resource conservation and is easy to automate. ◆ Summary of the Benefits of Powder Coating ◆ 【About the Coating Film】 - High strength of the coating film - High durability of the coating film - Excellent performance of the coating film - Ability to form thick coating films - Resistant to rust 【About the Coating Method】 - Can form a thick coating film in one application - Paint recovery and reuse are possible - Less affected by painting environment (temperature, humidity, etc.) - Short curing time for the paint - Easy mechanization and automation of painting 【About Powder Coating】 - Does not contain organic solvents (VOCs: volatile organic compounds) - No odor 【Economic Aspects】 - Efficient use of paint without waste - Long service life (15-20 years) 【Safety Aspects】 - No need to consider air pollution or health hazards from VOCs - No risk of fire caused by VOCs

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Disadvantages of Powder Coating (Powder Coating) 【Minoru Industries】

Powder coating is a coating method that uses static electricity to apply powder paint to a workpiece, followed by heating to melt and cure the paint.

◆Summary of the Disadvantages of Powder Coating◆ 【About the Coating Method】 - Coating appearance (prone to orange peel texture) - Difficult to form a thin coating film (generally over 30μm) - High curing temperature and preheating/heating temperatures - Color adjustments cannot be made after painting - Fine color adjustments are difficult *Our company offers over 6,000 color variations. - On-site application is difficult - Repainting is challenging *We also accept stripping work. 【Regarding Economic Factors】 - Initial investment is required due to the need for painting equipment - There may be initial costs for powder coatings. 【Regarding Safety】 - There is a risk of health hazards from dust - There is a risk of dust explosion occurrence

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Insulating coating for various shapes of busbars.

It is possible to add insulation and durability to the bus bar. Furthermore, its adhesion is also very excellent, so it does not easily peel off.

Insulation coating for busbars is widely done using epoxy resin. Unlike insulation methods using insulating sleeves or tubes, a uniform insulating coating can be formed on complexly shaped busbars. Additionally, epoxy resin has characteristics such as flame resistance, high insulation withstand voltage, and excellent moisture resistance. Thanks to our unique masking method, we can accommodate mass production even for complexly shaped conductive parts. ◆ What is a busbar? A busbar refers to a strip or bar made of copper that conducts electricity within distribution boards, switchboards, substations, battery banks, or electrical devices. In areas where high voltage and large currents flow, the absence of insulation coating allows for good heat dissipation, and increasing the surface area helps suppress high-frequency electrical resistance. ◆ What is insulation coating? It is a processing technology that possesses excellent electrical properties among resins and is used for applications such as insulating components, preventing electrolysis, and addressing charging issues. It is widely adopted not only for insulation films but also for improving product performance through partial coating.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Summary of Types and Characteristics of Super Engineering Plastics [Minoru Sangyo Co., Ltd.]

Super engineering plastics, referred to as "super engineering plastics," are a general term for engineering plastics that are particularly excellent in heat resistance and chemical resistance among engineering plastics.

Similar to engineering plastics, there is no clear definition for super engineering plastics, but their characteristic is that they have heat resistance of approximately 150°C or higher and can be used for long periods in high-temperature environments. Some super engineering plastics can even be used at temperatures above 260°C. Additionally, many super engineering plastics contain fluorine, which gives them high resistance to solvents and chemicals. Super engineering plastics that can be used in even higher temperature environments are not only applicable in areas where engineering plastics are used, but it is also noted that their molecular chains contain benzene rings. On the other hand, fluorine resins do not contain benzene rings, but they have the highest electronegativity, and the bond between carbon and fluorine is very stable, which gives them excellent heat resistance, cold resistance, and other properties, making them one of the super engineering plastics. For medical devices, they are adopted due to their high transparency and ability to withstand high temperatures from steam sterilization. However, while super engineering plastics are high-performance resins, they also come with a high cost. Nevertheless, the characteristics and cost advantages of super engineering plastics often outweigh the costs, leading to their active consideration.

Company：みのる産業
Price：Other

Surface treatment contract service
Coating

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for extending the lifespan of zirconia-coated setters for MLCC firing.

[New Technology] A new method different from thermal spraying allows for full coating even on complex structures! *Case-specific coating examples are currently being offered.

Narasaki Industries has developed a ceramic DIP coating that achieves extremely precise film thickness control. This allows for greater freedom in ceramic coatings for a variety of materials. 【Four Features】 ◆ High freedom of shape, capable of coating 3D shapes at meter scale ◆ Coating applicable to most high-performance materials ◆ Average thick film of 50μ possible ◆ Coating surface has good roughness and excellent smoothness (Ra 0.8 or less) 【Applicable Materials for Coating】 ■ Mullite ■ Alumina-based ■ Porous and dense materials used for setters, among others *Currently, we are conducting improvement tests to further enhance the density of the film. *Please download and view our coating case collection. We utilize composite ceramic films to achieve optimization according to application. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Processing Contract
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LTCC firing zirconia coating setter long lifespan

[New Technology] A new method different from thermal spraying allows for full coating even on complex structures! *Case-specific coating examples are currently being distributed.

Narasaki Industries has developed a ceramic DIP coating that achieves an incredibly precise film thickness control. This allows for a more versatile ceramic coating applicable to a wide range of materials. 【Four Features】 ◆ High freedom of shape, capable of coating 3D shapes at meter scale ◆ Coating applicable to most high-performance materials ◆ Average thick film of 50μ achievable ◆ Coating surface has good roughness and excellent smoothness (Ra 0.8 or lower) 【Materials that can be coated】 ■ Mullite ■ Alumina-based ■ Porous and dense materials used for setters, etc. *Currently, we are conducting improvement tests to further enhance the density of the film. *Please download our coating case collection for more information. We optimize using composite ceramic films tailored to your applications. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Processing Contract
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Proposal for extending the lifespan of firing jigs! New method of ceramic coating!

We propose extending the lifespan of setters in the sintering process, which is essential for manufacturing! Expanding inquiries on the Earth-friendly 'SDGs' theme!

Narasaki Industries has developed a ceramic coating that achieves extremely precise film thickness control. Its name is "Ceramic Dip Coating." As the name suggests, the workpiece is dipped into a ceramic slurry to form a film. This allows for a ceramic coating with increased freedom for a wide variety of materials and shapes. 【Features】 ◆ High freedom of shape, capable of coating 3D shapes at meter scale ◆ Coating possible on almost all ceramic substrates ◆ Average thickness of 50μm achievable ◆ Excellent thermal shock resistance with a film having a pore diameter of 0.1μm and a porosity of 30-40% ◆ Good surface roughness of the coating with excellent smoothness (Ra below 0.8) 【Applicable Materials for Coating】 ■ Mullite ■ Alumina-based materials ■ Porous and dense materials used for setters, etc. *Please download and view the coating case collection. We optimize using composite ceramic films according to application. Feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Processing Contract
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Reaction prevention! Barium titanate setter ceramic coating

[New Technology] Ceramic coating is possible up to the end face with a new method different from thermal spraying! *Available in a range from standard grade to dense grade!

In electronic components, it can be said that there is almost always a "sintering" process involved. Therefore, we would like to introduce a ceramic coating method using a dipping technique that differs from conventional thermal spraying for the setters you are using. 【Four Features】 ◆ High freedom of shape allows for ceramic coating on 3D shapes at meter scale ◆ Ceramic coating is possible on most high-performance materials ◆ Ceramic coating with an average thickness of 50μ is achievable ◆ The surface roughness of the coating is good and exhibits excellent smoothness (Ra 0.8 or lower) 【Applicable Base Materials for Coating】 *Main Setter Materials ■ Mullite ■ Alumina-based ■ Zirconia-based ■ SiC-based *We can accommodate both porous and dense ceramics. *Ceramic coating is also possible on other materials. Currently, we have a lineup of various dense grades of ceramic coating films (some are under development), and by downloading, you can view SEM image data categorized by grade. We can handle a wide variety of film types, so please feel free to contact us.

Company：ナラサキ産業メカトロソリューション部　機能材料課
Price：Other

Fine Ceramics
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Coating Course: What is Corrosion Resistance?

An easy-to-understand explanation of the types of durable coatings using diagrams and graphs!

For corrosion-resistant applications of fluororesin, there are broadly two categories: "sheet lining" and "baked coatings." In the case of sheet lining, a through-hole is created in part of the metal can body, allowing permeating substances that reach the metal to be released outside the system, thereby preventing extreme corrosion of the can body. In contrast, baked coatings differ in that they prevent the occurrence of corrosion by suppressing permeation. *For more details on corrosion-resistant coatings, please contact us or download our catalog for more information.*

Company：NIPPON FUSSO CO.,LTD.
Price：Other

Coating Agent
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Coating Course: What is Wear-Resistant Coating?

A clear explanation of the types of wear! Effective measures with the optimal coating!

In general, in fields centered around metals, the forms of wear are represented by the following four types: ● Adhesive wear ● Abrasive wear ● Corrosive wear ● Fatigue wear Additionally, secondary phenomena such as erosion, cavitation, and chipping are also noted. However, in the case of fluoropolymer coatings, this classification seems to be unsuitable, and based on various inquiries, it is considered to be represented by the following three types: ● Scratching wear ● Roughness wear ● Adhesive wear *For more details on wear-resistant coatings, please contact us or download the catalog for further information.*

Company：NIPPON FUSSO CO.,LTD.
Price：Other

Coating Agent
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Coating Course: What is Static Electricity Prevention?

Avoid troubles caused by static electricity charging on fluororesin surfaces!

The characteristics of fluoropolymer, such as corrosion resistance and non-stick properties, are widely used as solutions to various challenges in different plants and manufacturing facilities. On the other hand, problems caused by static electricity charging on the surface of fluoropolymer are also frequently encountered. For example, it is well understood that the volume resistivity of glass lining is around 10^12 Ωm, and precautions against static electricity hazards are taken; however, there have been cases where the fact that the volume resistivity of fluoropolymer exceeds 10^16 Ωm has not been adequately considered. *For more details on static electricity prevention, please contact us or download our catalog for more information.*

Company：NIPPON FUSSO CO.,LTD.
Price：Other

Coating Agent
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Coating Course: Anti-Static Coating for Release

What is a peel-off anti-static coating? A clear explanation of its three features!

Our "Peeling Static Electricity Prevention Coating" is designed to suppress peeling static electricity, particularly in the manufacturing processes of flat panel displays such as LCD and plasma displays, as well as LSI. For example, in the LCD manufacturing process, it suppresses the peeling static electricity that occurs when the glass substrate separates from the vacuum chuck plate, preventing damage caused by electrostatic discharge. This coating has the following three features: ● Peeling static electricity prevention performance ● Contamination-free ● High precision (ensuring flatness and parallelism) *For more details about the peeling static electricity prevention coating, please contact us or download the catalog to view it.

Company：NIPPON FUSSO CO.,LTD.
Price：Other

Coating Agent
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fluororesin Coating Course: What is Non-Stick and Release Coating?

A clear explanation of non-stick grades of fluoropolymer by application!

FEP resin has the lowest critical surface tension among fluoropolymers (17.8 dyn/cm), making it difficult for liquids to wet the surface (i.e., it has high non-stick properties). Additionally, it has the lowest adhesion energy (42.0 dyn/cm), which means that even wetted liquids can easily detach (i.e., it has high release properties). For this reason, FEP resin is used in various fields, from molding molds for rubber and resin products like golf balls to molding shapes for solid propellant fuels in space shuttles and Ariane rockets, as well as in applications ranging from rolls to large paint mixing tanks. *For more details on non-stick and release coatings, please contact us or download our catalog for more information.*

Company：NIPPON FUSSO CO.,LTD.
Price：Other

Coating Agent
Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Prevention of scrap accumulation during press processing for toys

Improving toy safety with die punch coating treatment!

In the toy industry, product safety is the top priority. In particular, scrap accumulation during pressing not only compromises product quality but can also lead to unexpected accidents. The inclusion of scrap and foreign objects increases the risk of ingestion and injury, threatening product safety. Our products support safe toy manufacturing by applying a tungsten carbide coating to dies and punches, which helps suppress scrap accumulation. [Usage Scenarios] - Press processing of toy parts - Prevention of scrap and foreign object inclusion - Improvement of product safety [Benefits of Implementation] - Quality improvement through suppression of scrap accumulation - Reduction of foreign object inclusion risk - Provision of safe products - Gaining customer trust

Company：テクノコート
Price：Other

Other machine tools
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"DLC coating" with a rich variety of membrane types, including hydrogen-free options. *Case studies available.

Prevent wear and scratches on cutting tools, molds, and machine parts! Types compatible with resin and rubber are also available.

Our "DLC Coating" not only offers high wear resistance but also possesses the characteristics required for mechanical relative motion such as rotation, sliding, and reciprocation, making it widely applicable to cutting tools, molds, automotive parts, sealing materials, and more. We offer a variety of film types that can be selected according to specific challenges, including the hydrogen-free "Genius Coat HA," which reduces friction resistance, and "Genius Coat F," which adapts to the deformation of resin and rubber materials. 【Examples of Applications】 ■ Automotive engine parts: Improved fuel efficiency by reducing friction resistance in oil ■ Various molds: Enhanced resistance to welding and wear ■ Industrial cutting tools: Improved resistance to welding and adhesion (burr prevention) ■ O-rings: Improved sliding properties while maintaining sealing performance 【We will be exhibiting at the 23rd Mechanical Elements Technology Exhibition Tokyo 2019!】 ■ Dates: February 6 (Wednesday) to February 8 (Friday), 2019 ■ Venue: Tokyo Big Sight ■ Booth Number: East 35-24 (East Hall 4) We will showcase various products, including DLC coatings. Please take this opportunity to visit our booth. *We are currently offering materials summarizing the features and application examples of DLC! For more details, please check the materials available for "PDF Download."

Company：日本アイ・ティ・エフ
Price：Other

Surface treatment contract service
Coating

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating Product List and Ranking from 568 Manufacturers, Suppliers and Companies | IPROS GMS

Coating Manufacturer, Suppliers and Company Rankings

Coating Product ranking