Feeding device Product List and Ranking from 282 Manufacturers, Suppliers and Companies

Powder Quantitative Supply Machine for Cosmetics 'Eatop/Sunflow'

The reliability of powder supply in cosmetics manufacturing, backed by over 40 years of experience.

In the cosmetics industry, accurate supply of powders such as excipients is essential to maintain product quality and stability. Low precision in powder supply can lead to inconsistencies in product finish and potential issues in the manufacturing process. Our volumetric powder dosing machine, "Eatop/Sunflow," addresses the challenges of powder supply in cosmetics manufacturing based on over 40 years of experience. 【Usage Scenarios】 - Manufacturing of foundations, powders, eyeshadows, etc. - Powder supply of excipients, pigments, additives, etc. - Automation of manufacturing lines 【Benefits of Implementation】 - Improved product quality due to high dosing accuracy - Reduction of powder loss and cost savings - Increased efficiency in the manufacturing process - Stable product supply

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

For ceramics molding: Eatop / Sunflow

Reliable powder quantitative supply backed by over 40 years of experience.

In the ceramics industry, the precise supply of raw powder is crucial for product quality during the molding process. In particular, to maintain consistent shrinkage rates and strength after firing, the accuracy of the powder blending ratios and supply amounts is essential. Variability in supply amounts can lead to product defects and reduced yield. Eatop/Sunflow specializes in the precise supply of granular, flowable powders, contributing to the stabilization of quality in ceramics molding. 【Usage Scenarios】 - Supply of raw powder in the ceramics molding process - Adjustment of powder blending ratios - Stabilization of product quality after firing 【Effects of Implementation】 - Stabilization of product quality through improved supply accuracy - Increased yield - Optimization of material costs

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Volumetric Powder Feeder for Sintering: 'Eatop/Sunflow'

Reliable powder quantitative supply backed by over 40 years of experience.

In the sintering process of metal powders, the uniform supply of materials affects the quality of the products. In particular, managing the sintering temperature and pressure is crucial, as even slight variations in the amount of powder supplied can impact the density and strength of the products. Uneven supply can lead to poor sintering, potentially resulting in reduced yield and increased costs. Our volumetric powder dosing machine, "Etop/Sunflow," addresses these challenges by ensuring stable powder supply. 【Application Scenarios】 - Sintering process of metal powders - Powder metallurgy processes - Ceramics sintering 【Benefits of Implementation】 - Improved product quality through stable powder supply - Enhanced yield - Cost reduction

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Quantitative feeder ideal for powder additives for plastics

The reliability of powder additives in plastic manufacturing, as demonstrated by over 40 years of experience.

In the plastic industry, the precise supply of additives is essential to maintain product quality and uniformity. Particularly in the formulation of colorants and functional additives, even a slight error in the supply amount can significantly impact the characteristics of the product. Eatop/Sunflow contributes to the stability of plastic product quality through high dosing accuracy. 【Application Scenarios】 - Coloring of plastic molded products - Imparting product characteristics with functional additives - Accurate weighing and supply of various powdered raw materials 【Effects of Implementation】 - Reducing waste of additives and optimizing costs - Suppressing color unevenness and variability in product quality - Establishing a stable production system

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For Electronic Materials] Eatop/Sunflow: Precision Powder Supply

A precision supply solution for electronic materials demonstrated by over 40 years of experience.

In the electronic materials industry, precise supply of powders that influence product quality is essential. Particularly in the precise manufacturing processes that handle fine materials, even slight fluctuations in supply can significantly impact product yield and performance. Eatop/Sunflow achieves high quantitative supply accuracy by completely discharging granular and flowable powders from the mass. The moisture prevention function provided by dry air supply and the mechanism that minimizes flushing also contribute to maintaining the quality of electronic materials. 【Usage Scenarios】 - Semiconductor manufacturing - Electronic component manufacturing - Precision coating 【Benefits of Implementation】 - Improved yield - Stabilization of product quality - Reduction of material loss

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Flow SP Type for Ceramic Molding

Proven performance demonstrated by over 2,000 units.

In the ceramics molding industry, the precision of powder supply that affects product quality is crucial. Molding defects can lead to reduced yield and increased costs, so stable powder supply is required. The High-Flow SP type achieves high powder metering supply through consistent filling density in the weighing mass and full discharge performance. 【Usage Scenarios】 - Ceramics molding process - Stabilization of powder supply quantity - Suppression of molding defects 【Benefits of Implementation】 - High powder metering supply accuracy - Improved yield - Cost reduction

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Flow SP Type for Metal Sintering

Proven performance demonstrated by over 2,000 units.

In the metal sintering industry, the precision of powder supply, which affects product quality, is crucial. Variability in powder supply during the sintering process can lead to uneven product density and reduced strength, potentially resulting in lower yield. The High-Flow SP type achieves high precision in powder metering supply through complete discharge from the weighing mass, contributing to the improvement of sintered product quality. 【Usage Scenarios】 - Sintering process of metal powders - Manufacturing of powder metallurgy products - Ceramics sintering 【Benefits of Implementation】 - Stabilization of sintered product quality - Improvement of yield - Optimization of material costs

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High Flow SP Type for Plastic Molding

Proven performance demonstrated by over 2,000 units.

In the plastic molding industry, the precise supply of materials affects product quality. In particular, molding defects and reduced yield can lead to increased costs, so a stable supply is required. The high-flow SP type achieves high powder quantitative supply through consistent filling density at the measuring mass and full discharge performance. 【Application Scenarios】 - Supply of plastic pellets - Mixing of additives - Supply to the hopper of molding machines 【Benefits of Implementation】 - Improved molding accuracy - Enhanced yield - Reduction of material loss

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-Flow SP Type for Fertilizers

Proven performance demonstrated by over 2,000 units.

In the fertilizer industry, uniform distribution and accurate supply amounts during fertilization operations significantly impact crop growth. Particularly, variations in supply amounts and clogging can become issues depending on the type and granularity of the fertilizer. The High-Flow SP type achieves high powder quantitative supply through the stabilization of filling density in the weighing mass and full discharge performance. 【Usage Scenarios】 - Fertilizer manufacturing processes - Blending of compound fertilizers for application - Supply of pelletized fertilizers 【Benefits of Implementation】 - Optimization of fertilizer costs through stabilization of supply amounts - Reduction of growth inconsistencies through uniform distribution - Improvement of work efficiency

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-Flow SP Type Powder Quantitative Feeder for Mining Applications

The optimal solution for powder supply in mining, as demonstrated by over 2000 units of achievement.

In the sorting process of mining, accurate powder supply according to the type and particle size of the minerals is essential for efficient sorting operations and quality control. Low powder supply accuracy can lead to decreased sorting efficiency and deterioration of product quality. The High-Flow SP type achieves high powder metering supply accuracy through complete discharge from the weighing mass, addressing the challenges in the sorting process of mining. 【Usage Scenarios】 - Ore sorting process - Powder mixing process - Sampling for quality control 【Benefits of Implementation】 - Improved sorting efficiency due to high supply accuracy - Reduction of powder loss, contributing to cost savings - Realization of stable quality product supply

Company：赤武エンジニアリング本社／工場
Price：Other

Powder Supply Device
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

You can buy used powder machinery that can be used from today at about one-third of the new price!

1,000 units of refurbished machinery! They are ready for use immediately after purchase. High-value buyback with free pickup and transportation costs!

We have achieved a stock of over 1,000 ready-to-use refurbished machines and a high-value purchase system! As a specialist in powder machinery, we ensure complete maintenance and deliver machines in a condition ready for immediate operation. We showcase and sell refurbished powder machinery at a top-class scale in Japan! If there are machines not in stock, we can assist you in procuring them upon request. ■□■□■□■□■□■□■□■□■□■□■□ 【Five Assurances Unique to a Powder Machinery Specialist】 1. Refurbished 2. Ready for immediate use 3. 3-month machine warranty 4. Maintenance record available 5. Comprehensive after-sales service ■□■□■□■□■□■□■□■□■□■□■□ *Please request the inventory list or download the PDF data to view it. *Some products may be excluded, so please contact us for more details.

Company：東洋ハイテック
Price：Other

Powder Supply Device
Powder Conveyor Device
Used goods purchase
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Active in outdoor installation of 'security cameras' and 'surveillance cameras'!

It enables the installation of "security cameras" and "surveillance cameras" even in places where securing power is difficult.

The "Solar Independent Power Supply" serves as a new power source in locations where securing electricity is difficult, such as outdoors. During the day (when there is sunlight), it supplies power generated by solar panels to devices, and any surplus electricity is charged into the built-in battery. At night (when there is no sunlight), it supplies power stored in the battery to devices. It is recommended for powering relatively low-consumption devices such as surveillance cameras, LTE routers, and LED lighting! It is often adopted for outdoor camera installations, such as simple river monitoring cameras (for the Ministry of Land, Infrastructure, Transport and Tourism and local governments), and you can choose from several patterns for battery quantity and output voltage, allowing for versatile applications. It is also recommended for those considering "security" and "monitoring" in mountainous areas with frequent illegal dumping or riverbanks that are hard to monitor! **Features** - Suitable for cases where securing power is difficult in vast areas like parks and riverbanks - Can supply power even during power outages - Offers a combined proposal of the power supply unit and solar panels - Independent power type, so no electricity costs are required - Can be used for various applications depending on your ideas For more details, please download the catalog or specifications, or contact us.

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
Solar power generator
Other environmental equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Clean Energy!

Clean energy that does not emit carbon dioxide, which is said to be a cause of global warming!

Tokyo Power's "Solar Independent Power Supply Unit" serves as a new power source in environments where the power grid is not established. During the day (when sunlight is available), it supplies power generated by solar panels, and at night (when there is no sunlight), it provides power stored in batteries to devices. Additionally, even during consecutive days of bad weather (without sunlight), it can still supply power to devices from the stored battery power. [The available power supply time during no sunlight varies depending on the installation location and the power consumption of the devices used, so we will propose the optimal system after discussing your needs.] It can be used for a variety of applications, but it is particularly recommended for powering devices with relatively low power consumption, such as surveillance cameras, LED lighting, and communication devices like Wi-Fi! As it does not emit carbon dioxide, which is considered a cause of global warming, it is expected to see increasing utilization in the future as a "clean energy!" ★ For more details, please download the catalog and specifications or contact us.

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
Solar power generator
Other environmental equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

A standalone power source combining solar panels and batteries!

Since it is an independent power supply that does not require commercial power, it can provide electricity even during disasters or power outages!

The "Solar Independent Power Supply" serves as a new power source in environments where securing outdoor electricity is difficult. During the day (when there is sunlight), it supplies power generated by solar panels to devices, and any surplus electricity is charged into the built-in battery. At night (when there is no sunlight), it supplies power stored in the battery to devices. Moreover, even during long periods of no sunlight, such as during the rainy season, it can operate for about 72 hours! (When using one battery with a load of 4W). It can be used for a variety of purposes, but it is particularly recommended for supplying power to devices with relatively low power consumption, such as surveillance cameras, LED lighting, and Wi-Fi communication equipment! Since it is a "clean energy" that does not emit carbon dioxide and other gases believed to be responsible for global warming, it is also useful as educational materials in educational institutions and as a power supply during disasters or power outages! **Features** - Power supply is possible during disasters and power outages - Easy to install even in cases where wiring is difficult in vast areas such as parks and mountainous regions - Power supply unit and solar panel are proposed as a set - Environmentally friendly due to being clean energy - Can be used for various purposes depending on ideas! ★ For more details, please download the catalog and specifications or contact us.

Company：東京電源
Price：100,000 yen-500,000 yen

power supply
Solar power generator
Other environmental equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pumping module achieving low pulsation and ultra-high resolution for fuel cell manufacturing.

For supplying electrolyte in fuel cells! Improve performance and reliability with a high-end liquid delivery module.

In the manufacturing of fuel cells (MEA), the uniformity of the catalyst layer is a decisive factor that affects the cell's power generation efficiency and yield. Tekan's high-end liquid delivery module, Cavro Centris, achieves an ideal thin film coating through smooth motion. 【Application Scenarios】 - Liquid supply to die coaters or comma coaters for the formation of MEA (membrane electrode assembly) catalyst layers - Optimization of catalyst composition: Automatic and precise reproduction of fine variations in mixing ratios that are impossible to achieve manually - Hydrophilization treatment and surface modification of the electrolyte membrane (PEM): Droplet application and coating of modification liquid onto the electrolyte membrane 【Benefits of Introducing Cavro Centris】 - Dramatic improvement in coating quality due to pulsation-free liquid delivery - Minimization of loss of expensive catalyst materials through "drop" control - Robust design that withstands harsh slurry characteristics - Continuous flow achieved through tandem operation (using two units)

Company：テカンジャパン
Price：Other

Positive Displacement Pump
Syringe Pump
pump
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0340 Exhaust gas treatment, quicklime supply system

Installed in the quicklime supply system for exhaust gas treatment! Since the installation, there have been no troubles at all.

This is an introduction to a case where a blow disk was installed in a quicklime supply system associated with exhaust gas treatment at a production plant. The quicklime began to bridge in the equipment hopper, and we received inquiries from the operators responsible for maintenance and other tasks. Quicklime has been widely adopted in many fields, and in this case, after reviewing the hopper diagrams and the user's situation, we provided information on what we believed to be the most suitable method, including costs. Since the installation of the blow disk, there have been no further issues. [Hopper Overview] ■ Size: 1000×1000 ■ Outlet: 100A ■ Discharge Mechanism: Rotary Valve *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous implementation examples, which can be accessed through the link below.

Company：ミナギ
Price：Other

Other powder equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Used with nitrogen gas.

The subject matter is agricultural chemicals with a particle size of about 100μ! A case study of the introduction of a Brody disk.

Here is a case study of a silo installed in a chemical plant. Initially, there were four proposals for the number of Brodie disks to be installed, but to minimize the usage of nitrogen gas, it was decided to install eight disks. We have not seen the target material in this case, but according to the customer, it has "quite poor fluidity." However, after installation, the equipment has been operating without any issues. 【Overview】 ■ Silo diameter: φ1200 ■ Discharge port diameter: φ200 ■ Target material: - Pesticide-related - Particle size: approximately -100μm - Bulk density: approximately 0.6 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign material contamination. The silicone disks of this equipment are highly excellent in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Permanent sterilization, odorless cutting fluid (coolant) automatic supply device.

For the parts processing industry, this is the ultimate dream product, a solution that addresses all the various troubles associated with the long-standing inconveniences of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, we have a device that automatically generates cutting fluid in-house, which offers "far lower costs" and "higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is completely automated, requiring no manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid's performance at levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far surpasses the performance of commercially available water-soluble cutting fluids and also possesses the performance of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory transforms into a mist that disinfects bacteria, resulting in the entire factory becoming "odorless and healthy air." By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing it to operate continuously in a state equivalent to new fluid. Therefore, the need for "fluid replacement" is completely eliminated, and there is no longer any need for the disposal of industrial waste.

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other machine tools
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cost Reduction for Machine Tool Processing - Hybrid Cutting Fluid Automatic Supply Device

The HCS-100 hybrid cutting fluid automatic replenishment system will enable the Japanese parts processing industry to achieve costs that are on par with those of emerging countries.

Introducing the powerful equipment, the HCS-100 Hybrid Cutting Fluid Automatic Replenishment System, which supports Japan's parts processing industry, renowned for its processing precision worldwide. This hybrid cutting fluid combines the properties of water-soluble cutting fluids and oil-based cutting oils, eliminating most of their drawbacks and showcasing only their advantages, allowing users to automatically generate this dream-like cutting fluid themselves. The conventional cutting fluid, consisting of 10% cutting oil and 90% water, is replaced by a 100% cutting fluid that offers superior performance. With over 50% annual cost reduction, there is no permanent spoilage or odor generation, extended tool life, reduced processing time, no foam generation, no rust formation, no need for additional fluid, and no replenishment work required from operators. Average tank capacity: 300L, dilution ratio: 20 times, number of tanks: 20. The cost difference between conventional equipment and the HCS-100 model results in a reduction of 5.5 million yen annually, totaling 16.6 million yen over three years. All manual replenishment work, new fluid, and additional fluid costs are unnecessary. We also assist companies with the application process for subsidies of 1/2 and 2/3. For more detailed information, please contact U.ENG. We look forward to the continued development of Japan's parts processing industry through cost reductions with this cutting fluid.

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other processing machines
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Production Factory Improvement Hybrid Cutting Fluid Automatic Supply System

For the parts processing industry, this is the ultimate dream product that addresses all the various troubles caused by the long-standing inconvenience of handling cutting fluids.

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300 watts, a few consumables, and tap water, we have a device that automatically generates cutting fluid with "far lower costs and higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is fully automated, requiring no manual labor from operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to maintain the cutting fluid at performance levels equivalent to fresh fluid. [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far surpasses the performance of commercially available water-soluble cutting fluids and also possesses the performance characteristics of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria, resulting in the entire factory being transformed into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to fluid degradation, allowing operations to continue in a completely fresh fluid state. Therefore, the need for "fluid replacement" is completely eliminated, and there is no longer any need for the disposal of industrial waste.

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other machine tools
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Manufacturing Subsidy: Hybrid Cutting Fluid Automatic Supply Device

We can assist you with the subsidy application for this product, which is the ultimate dream product for the parts processing industry and solves the long-standing issue of cutting fluid costs. Would you consider it?

The era of needing to purchase cutting oils is over. With just a minimal power consumption of 300W, a few consumables, and tap water, our device automatically generates cutting fluid that is "far lower in cost and has higher cutting performance" than the cutting oils currently being purchased. The supply to each machine's cutting fluid tank is "completely automatic," eliminating the need for any manual work by operators. Moreover, the groundbreaking feature of this device is its ability to automatically adjust the concentration management to "maintain the performance of the cutting fluid at levels equivalent to fresh fluid." [Patent pending] This cutting fluid is a "hybrid cutting fluid" that far exceeds the performance of commercially available water-soluble cutting fluids and also possesses the properties of oil-based cutting oils by adding a small amount of additive oil. It permanently eliminates "decay and odor" caused by bacteria and microorganisms in water-soluble cutting fluids, and the mist of cutting fluid that drifts in the factory is transformed into a mist that disinfects bacteria and microorganisms, turning the entire factory into an "odorless, healthy air" environment. By maintaining the "hybrid cutting fluid" with automatic correction to keep it fresh, there are no issues such as tool breakage, rust formation, or decreased cutting speed due to the degradation of the cutting fluid, allowing it to operate continuously in a state equivalent to fresh fluid. Therefore, the need for "refilling cutting fluid has completely disappeared, and the disposal of industrial waste has also been eliminated."

Company：U.ENG 習志野台
Price：1 million yen-5 million yen

Other machine tools
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic particleization of coolant liquid【Automatic coolant liquid dilution supply device】

The coolant liquid that was previously diluted manually is now processed in this device, which atomizes it in the stirring section, ensuring a consistently stable particle size and concentration.

- The device automatically stirs the contents, so it does not dirty the surrounding area, and there is no need for cleaning the floor. - Each liquid is automatically measured, allowing for stable concentration management. - The dilution concentration is measured based on volume conversion. - Automatic measurement by the device helps reduce labor costs. - It has a built-in stirrer, which generates a finely dispersed diluted liquid. - The finely dispersed coolant dilution liquid with stable concentration improves machining accuracy. - Coolant liquid can be supplied automatically. - Tank capacity and supply methods can be customized. We can contribute to your company's "factory automation."

Company：中部クリーン名古屋営業所
Price：1 million yen-5 million yen

Other FA equipment
Other environmental equipment
Other water treatment equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coolant liquid 'automatically replenished' [Automatic coolant liquid dilution supply device]

The coolant liquid that was previously supplied by the person in charge will now be automatically replenished by this device through liquid level control, eliminating the need for managing the height of the coolant liquid level.

- The necessary coolant liquid is automatically replenished by controlling the liquid level you want to manage. - Since it is sent out by the pressure of a pump built into the device, transportation is unnecessary. - The coolant liquid is automatically generated, mixed, and stirred, so there is no mess in the surrounding area, and no cleaning of the floor is required. - Each liquid is automatically measured, allowing for stable concentration management. - The dilution concentration is measured by volume conversion. - This device is fully automatic, which helps reduce labor costs. - It has a built-in stirrer, resulting in a finely dispersed diluted liquid. - The processing accuracy improves with the finely dispersed coolant dilution liquid at a stable concentration. - Coolant liquid can be supplied automatically. - Tank capacity and supply methods can be customized. In other words, it contributes to the "automation of factories."

Company：中部クリーン名古屋営業所
Price：1 million yen-5 million yen

Other FA equipment
Other environmental equipment
Other water treatment equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coolant liquid replenishment is freed from【Automatic coolant liquid dilution supply device】.

The coolant liquid that has been generated and supplied by the person in charge until now. This device is fully automated from the preparation to the supply of the diluted solution. It can contribute to cost reduction and automation.

- When the coolant liquid level falls below the specified level, coolant liquid diluted to the designated concentration is automatically supplied through piping. - Since it does not involve manual intervention, a stable dilution rate of coolant liquid is generated. - It is transported and supplied through equipment and piping, so it does not contaminate the surrounding area. - This device is fully automatic, which helps reduce labor costs. - Personnel can focus on operational tasks, contributing to improved production efficiency. - The processing accuracy is enhanced with a coolant dilution liquid that is finely atomized at a stable concentration. - Tank capacity and supply methods can be customized. In other words, it contributes to the "automation of factories."

Company：中部クリーン名古屋営業所
Price：1 million yen-5 million yen

Other FA equipment
Other environmental equipment
Other water treatment equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Automatic Dilution Supply Device for Coolant Liquid Installation Example 12

Adjustment of dilution concentration is possible! Case study of the introduction of an automatic coolant liquid dilution supply system.

We would like to introduce a case study of the automatic dilution supply system for coolant liquid from Chubu Clean. The "FAM20A (old model)" has been implemented to supply coolant liquid to four combined NC lathes (with gantry). This product can generate a diluted liquid that is atomized by a stirrer inside the machine. It features management of the liquid level in the tank and automatic water supply. 【Case Study】 ■ Four combined NC lathes (with gantry) ■ Automatic supply of diluted coolant liquid ■ 24-hour unmanned operation ■ Implemented product: FAM20A (old model) Our company resolves issues with unique products, not limited to off-the-shelf items. If you are having trouble with floating oil, please consult us first. *For more details, please refer to the PDF document or feel free to contact us.

Company：中部クリーン名古屋営業所
Price：Other

Other environmental equipment
Other FA equipment
Other process controls
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bottle supply machine 165 bpm 'BFR-1000-M2SC-W'

[Video Available] From manual supply to automatic supply! The standing conveyor will upright the containers.

The "BFR-1000-M2SC-W" is a bottle supply robot that combines TOKUNAGA's alignment expertise and the versatility of robots into one package. It accommodates various shapes (round, square, flat, etc.) and colors (white, black, transparent, etc.). Multiple types can be used interchangeably with simple operations. Additionally, the bottle feeding hopper can be customized to your desired size. 【Features】 ■ High-speed type ■ Compatible with containers up to 2L ■ Supply capacity: 100–180 bottles/min ■ Upright conveyor to position containers vertically *For more details, please refer to the PDF document or feel free to contact us.

Company：徳永製作所
Price：Other

Other food machinery
others
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic Supply Machine for Powdered Activated Carbon for Water Purification Plants

Water quality improvement device that contributes to odor control and the removal of chemical substances.

At water treatment plants, the removal of unpleasant odors and harmful substances contained in raw water is essential for supplying safe drinking water. Particularly, depending on the condition of the water source, odor components can affect water quality, potentially causing consumer discomfort and health concerns. Powdered activated carbon is known to be an effective means of adsorbing these odor components and chemicals, thereby improving water quality. Our "Powdered Activated Carbon Automatic Supply System" stably supplies powdered activated carbon with 50% moisture content, supporting the removal of odors in water treatment processes. 【Usage Scenarios】 - Raw water treatment at water treatment plants - Advanced water treatment - Water treatment processes requiring odor control 【Benefits of Implementation】 - Improvement of water quality through the removal of odor components - Supply of safe and delicious water - Enhanced reliability of water treatment plants

Company：広洋技研
Price：Other

Water treatment equipment
Other water treatment equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic Supply Machine for Powdered Activated Carbon for Wastewater Treatment Plants

A water-containing activated carbon supply device that contributes to odor control and water quality improvement.

At wastewater treatment plants, the generation of odors from sludge is a significant challenge. Odors can not only impact the surrounding environment but also adversely affect the health of workers. As a countermeasure against odors, deodorization using powdered activated carbon is effective, but it is crucial to stably supply the appropriate amount of activated carbon. Our "Powdered Activated Carbon Automatic Supply System" provides a stable supply of powdered activated carbon with 50% moisture content, supporting odor control. 【Usage Scenarios】 - Sludge dewatering process - Aeration tank - Final discharge tank 【Benefits of Implementation】 - Odor suppression through the adsorption of odor components - Improvement of water quality - Enhancement of the working environment

Company：広洋技研
Price：Other

Water treatment equipment
Other water treatment equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[PFAS Regulation Measures] Reduction of Activated Carbon Replacement Frequency! Powdered Activated Carbon Supply System

Annual running cost reduced by 39% | Significantly cut replacement and disposal costs as well as maintenance management efforts! Achieve stable water quality and cost reduction with double cleaning!

The Reach Filter we handle is an activated carbon adsorption device that dramatically improves the "maintenance and management costs of activated carbon" in water treatment. 【Are you facing any of these issues?】 ■ The costs of replacing and disposing of activated carbon are a heavy burden. ■ Replacement work and daily maintenance management require a lot of manpower and effort. ■ Conventional adsorption devices do not stabilize water quality, leading to increased costs. We will solve this with our patented activated carbon adsorption device, the "Reach Filter." *For more details, please download the PDF or feel free to contact us.

Company：広洋技研
Price：Other

Water treatment equipment
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Buffer material for electronic devices: "Rice Wrap"

Static electricity prevention! Cushioning material that reduces environmental impact through natural decomposition.

In the manufacturing and distribution of electronic devices, anti-static measures and cushioning materials for product protection are essential. However, traditional cushioning materials have raised concerns about environmental impact upon disposal. Therefore, we propose a biodegradable cushioning material called "Rice Wrap" that reduces environmental burden while also addressing static electricity issues. 【Usage Scenarios】 - Manufacturing and distribution of electronic devices - Want to prevent product damage caused by static electricity - Experiencing challenges with the disposal of traditional cushioning materials - Aiming to reduce environmental impact 【Benefits of Implementation】 "Rice Wrap" is designed to be biodegradable in nature through the addition of the oxidation-type biodegradable agent "P-Life." It significantly reduces environmental impact compared to traditional cushioning materials. Additionally, it is equipped with anti-static properties, making it ideal for protecting products in the manufacturing and distribution of electronic devices.

Company：KGテクノサービス
Price：Other

Cushioning material
Feeding device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Feeding device Product List and Ranking from 282 Manufacturers, Suppliers and Companies | IPROS GMS

Feeding device Manufacturer, Suppliers and Company Rankings

Feeding device Product ranking