Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jul 16, 2025～Aug 12, 2025
This ranking is based on the number of page views on our site.
271～285 item / All 400 items
This is a CIP molding machine capable of pressure molding up to 400 MPa (surface pressure of 4 tons)!
The CIP molding machine is a device that can apply isotropic pressure to the molded body using hydraulic pressure. It is used for the densification of metal and ceramic powders, as well as for the sterilization of food.
Manual pressure forming is possible up to a maximum of 200 MPa (surface pressure of 2 tons)!
It is possible to achieve high-density molding because the molding body is uniformly pressurized by water pressure! This is a compact, manually operated cold isostatic press with a simple structure and low cost, combining a custom-made lab press and a pressure-resistant container. One of its attractions is that it can also be used as a powder molding machine when the pressure-resistant container is removed. It is ideal for achieving uniform molding density in cases where high-density molding of metal and ceramic powders, as well as molding of irregular shapes and long objects, is difficult. It is also possible to efficiently create homogeneous and straight raw material rods by placing the raw powder in a rubber bag. It is widely used in universities, national research institutions, and corporate laboratories.
A small heater press capable of molding while applying heat up to 400℃.
This is a small manual heater press machine developed for experimental research and development for heating and forming. By removing the heater die set, it can be used as a standard pressing machine. It has two pressing capacities: 100 kN and 200 kN. The heating plate size is 80 mm square. Heating temperature range: room temperature to 400°C. It is suitable for heating and compression molding of various materials. It is widely used in research institutes and development labs for testing various battery materials, and is ideal for producing membrane electrode assemblies (MEAs) for solid polymer fuel cells. With precision grinding and a four-column heater die set, the parallelism of the heating plate is 10 to 15 µm (at 80 mm square).
Transforming wood resources into profit! Factories generating 200-300 kg of wood-based waste.
The "BRIK Series" is a briquette molding machine that utilizes wood pellets and briquettes made from leftover wood materials and thinned timber from lumber mills, enabling heat utilization for heating and hot water supply, as well as power generation. It can operate for 24 hours at a pressure of 2000 kg/cm², and we offer a series with a production capacity of 200 to 2000 kg/h (2 tons) per hour. The briquettes produced by this mechanical machine are far superior in quality, compression ratio, and calorific value compared to those made by hydraulic molding machines. It is also possible to produce various shapes, including round, square, hollow core, and Pax (short briquettes), all with a single machine. 【Features】 ■ High reliability and durability with a long lifespan ■ Ease of maintenance and production cost efficiency ■ High-precision structural design ■ Extremely high compression molding capability ■ Significant volume reduction *For more details, please refer to the catalog or feel free to contact us.
![Small Vacuum Forming Machine "V.former" [Everyday Objects Become Molds!]](https://image.mono.ipros.com/public/product/image/057/2000236000/IPROS17612767635654901061.jpg?w=280&h=280)
A compact vacuum forming machine that allows you to easily create molds from familiar objects! If it's a hard item, you can use the actual object as a mold!
The small vacuum forming machine "V.former" is a safe, easy, and compact 3D production device designed by vacuum forming professionals. It enables flexible three-dimensional shaping in various situations. For 3D production objects (as a substitute for molds), hard items can be directly used as molds. Special sheets for the included cassette are also available for purchase. 【Features】 ■ For materializing images in offices and laboratories ■ For transporting small parts ■ For protecting artworks and art pieces ■ For producing three-dimensional teaching materials *For more details, please request a brochure or view the PDF data available for download.
For all users struggling with the correction of metal bond grinding wheels! We provide high precision shapes and excellent cutting performance.
The "EDT300" is a grinding wheel correction device that allows for easy in-house correction of metal bond grinding wheels. Equipped with KOYO technology, it features a discharge truing function. It can reduce the labor involved in grinding wheel replacement and management. Additionally, it allows for correction into free shapes through wire discharge. Furthermore, correction can be performed while the grinding wheel is still mounted in the holder. 【Features】 ■ Significantly reduces management labor and costs ■ Space-saving ■ High functionality ■ High precision ■ Enables easy in-house correction of metal bond grinding wheels *For more details, please refer to the PDF document or feel free to contact us.
There is a track record of deliveries to national universities! Compact-sized molding machine.
The "NGF-T-0203" is a compact-sized NGF/TOM molding machine that is recommended for research and development purposes. It comes with traceability features, allowing for the recording and analysis of molding data to track causes. 【Features】 ■ Compact size suitable for installation in laboratories ■ Equipped with comprehensive safety features such as safety sensors and monitors ■ Clean spots are available to enhance the cleanliness of the molding environment ■ The control panel and monitor can be installed outside the clean spot * Clean spot configuration is an optional specification * For more details, please download the PDF or contact us.
The cycle time of one cycle is reduced to 1/3! Compactly designed rotary NGF molding machine.
Our company offers the double-sided vacuum forming machine 'NGF-0512-RS', which adopts a rotary transport system that can shorten cycle times. This model is designed for mass production and comes with an automatic film supply device. Please feel free to contact us if you have any inquiries. 【Features】 ■ Cycle time for one cycle is reduced to 1/3 (1 cycle: 90-100 seconds based on our records) ■ Capable of multi-cavity forming ■ Installation space is reduced by half ■ Total electrical capacity is reduced by 15% ■ Equipped with an automatic film supply device *For more details, please download the PDF or contact us.
Spring roll forming machine that brings together the technology of Daiei Giken Co., Ltd. to create deliciousness.
The spring roll forming machine "HTS-45" has fully automated the process of filling a thin, baked skin with a precise amount of filling (meat, vegetables, etc.) and wrapping it up. It enables the formation of tight and more rounded spring rolls. Paste-like raw materials are fed into the hopper of the skin forming machine, while a strip of baked thin skin is cut to a specified length, and a precise amount of filling is added and wrapped. The rolled products are lined up in a row on a conveyor for transport. [Features] - Enables the formation of tight and more rounded spring rolls - An automated spring roll production machine that fills and wraps a precise amount of filling in a baked thin skin *For more details, please refer to the catalog or feel free to contact us.
Can produce up to 12,000 pieces in one hour! Spring roll forming machine that wraps the skin, fills the contents, and cuts.
The stick spring roll forming machine "HSR-100" is a food machine manufactured by Dai Ei Giken Co., Ltd., which holds a top-class share in the industry. It continuously feeds a strip of skin (spring roll skin, crepe) into the forming drum, simultaneously filling it with ingredients while winding it in a spiral shape, and cuts it to a specified length with an internal cutter. In addition to this, we offer various other spring roll forming machines. Please feel free to consult us. 【Features】 ■ A spring roll forming machine that performs filling and cutting of the contents ■ Thickness can be changed by replacing the molding drum * For more details, please refer to the catalog or feel free to contact us.
筋（スジ）入りの物でも連続して球形にカット！フライヤーに落下させる肉団子の成形機
『MB-60』は、消費電力0.6kWで3,600個/時間の生産能力を有している ミートボール成形機です。 特殊シャッター方式の採用により、肉・野菜等の筋（スジ）入りの物でも 連続して球形にカットし、フライヤーに落下させる構造。 機械サイズは500×900×2,000mm（W×L×H）となっております。 【仕様】 ■生産能力：3,600個/時間 ■製品サイズ：重さ10g～25g ■機械サイズ：500×900×2,000mm（W×L×H） ■消費電力：0.6kW ※詳しくはPDF資料をご覧いただくか、お気軽にお問い合わせ下さい。
Power consumption 0.8kW! Finishing the rolled noodle strip to the specified dimensions, filling it with ingredients, and shaping it.
The "MR-50" is a fully automated meat-wrapping forming machine that automates the processes of noodle sheet shaping, filling with ingredients, forming, and unloading. It finishes the rolled noodle sheet to the specified dimensions, fills it with ingredients, and shapes it. The products come out lined up on a conveyor. The weight of the products ranges from 20g to 50g, with a production capacity of 3,000 pieces per hour. 【Specifications】 ■ Production capacity: 3,000 pieces/hour ■ Product size: Weight 20g to 50g ■ Machine size: 1,300×700×2,200mm (W×L×H) ■ Power consumption: 0.8kW *For more details, please refer to the PDF document or feel free to contact us.
