Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jun 17, 2026～Jul 14, 2026
This ranking is based on the number of page views on our site.
121～150 item / All 1424 items
This equipment is a melting furnace designed for the volume reduction and harmless treatment of municipal waste incineration ash.
■Equipment Features - The device can be made more compact due to the high-density heat source. - High-temperature melting is possible. - You can choose the type of carrier gas, such as air plasma or inert gases (N2, Ar) plasma.
It is a furnace for manufacturing insulation materials (rock wool) for various purposes.
There are two main types: the hot charge method using molten slag from the blast furnace and the cold charge method using ore as raw material. In the case of hot charge, a low energy unit consumption can be achieved. By using a slag quantitative discharge device, it is possible to stably supply slag to the subsequent cotton production line, resulting in good product quality.
Alloy iron (ferroalloy) refers to a general term for various alloys of iron combined with elements added during the steelmaking process, such as deoxidizers or special steel materials (including non-ferrous materials). We supply electric furnaces for the production of various alloy irons, including ferromanganese and ferrochrome.
Aluminum melting holding furnace
It is a structure that tightly seals the crucible and the furnace cover, allowing exhaust gas to be expelled to the outside through a flue installed beside the furnace. During melting, exhaust gas is discharged from both above the crucible and from within the furnace, which allows for overheating and reduces melting time compared to conventional products, resulting in energy savings. Additionally, once the ingot reaches a molten holding state, the upper cover of the flue can be opened to allow the exhaust gas to be expelled upward, enabling the separation of aluminum and exhaust gas, which prevents oxidation of the aluminum and improves quality. This is a jointly developed product with Osaka Gas Co., Ltd. and has obtained a patent.
MK type crucible furnace
We design and manufacture tilt furnaces, reflective furnaces, drying furnaces, and control panels, and we handle everything from installation to maintenance in-house.
How about using it as an electric furnace for high-temperature catalytic chemistry connected to gas chromatography?
We carefully selected the most suitable model for high-temperature catalytic chemistry research from numerous Carbolite-Gero tube furnaces.
FHA (Zone 1) and FHC (Zone 3) are tube furnaces that can operate at a maximum temperature of 1350°C and can be used both horizontally and vertically.
The F series has a wide range of applications and is equipped with a rich variety of accessories. It features a high-quality 5mm APM wire heating element embedded in insulation, held in place by a ceramic ridge. The low heat capacity insulation made of ceramic fiber enables reduced energy consumption and improved heating rates. The control thermocouple is of high-grade type S. Additionally, when precise temperature control and uniformity are required, the heating area can be subdivided into up to eight zones.
HTRV is a high-temperature tube furnace designed for vertical use, with a maximum temperature of 1800°C.
High-grade insulation made of fiber plates has a low thermal conductivity, achieving reduced energy consumption and improved heating rates. The insulation material and the heating element made of molybdenum disilicide are built into a rectangular housing. The heating element is installed vertically and is easy to replace. When oxygen is present at high temperatures, molybdenum disilicide forms a layer of oxide, protecting the heating element from further thermal and chemical corrosion. The HTRV series, equipped with a wide range of accessories, provides a perfect system solution for advanced heat treatment at high temperatures. It is designed as standard without a stand for installation on your own equipment. An optional L-shaped stand is available for independent use.
FST / FZS – Horizontal and vertical dual-use split tube furnace (maximum temperature 1300°C)
The FST (1 Zone) and FZS (3 Zone) are split tube furnaces that can operate at temperatures up to 1300°C and can be used both horizontally and vertically. The split heating modules make it easy to load working tubes and reaction vessels with fixed end flanges. The separable structure also allows for increased cooling rates of samples. Cooling grooves are incorporated into the housing to promote convective cooling of the outer casing. The upper half of the furnace body is equipped with a handle, and a one-touch clamp allows for safe locking and unlocking. The furnace body is made of ceramic fiber modules, and high-quality APM wire heating elements are embedded in insulation held by ceramic ridges. When the furnace body is opened, a safety switch is activated, cutting off power to the heating elements, ensuring the safety of the operator.
The CWF series is a tabletop type research general-purpose chamber furnace. It has a maximum temperature of 1300°C and is available in five different sizes.
The CWF series is a tabletop type research general-purpose chamber furnace. It can reach a maximum temperature of 1300°C and is available in five different sizes. In the CWF-B, air flows in through the intake port located on the door, and the chimney quickly exhausts waste gases, promoting the incineration of samples. The CWF-BAL is equipped with a built-in scale, making it ideal for thermal gravimetric analysis (TGA) and loss on ignition (LOI) tests, where monitoring weight changes during heating is necessary. These are essential for quantifying organic components in cement, lime, calcined bauxite, and refractories. For ashing samples that are primarily composed of organic materials, the AAF-BAL is recommended.
The RHF series is a chamber furnace that uses silicon carbide heaters.
The RHF series is a chamber furnace that uses silicon carbide heaters, available in four different chamber volumes and three maximum operating temperature combinations of 1400°C, 1500°C, and 1600°C (a total of 12 models). It features a robust construction, high-performance heating elements that enable rapid heating (reaching 1400°C in under 40 minutes), and long service life.
The experimental HTF high-temperature chamber furnace has models at 1700°C and 1800°C.
The two small models for each temperature are tabletop types, while the large model is a floor-standing type. These can be customized to suit the customer's needs. For example, a catalytic afterburner can be attached for the degreasing application of binders.
It can handle a common temperature of 700℃ and a maximum temperature of 800℃! It comes with a two-tier sample rack, a tray for loading and unloading, and a handle.
The "ABF" series is a reburning ash furnace suitable for ashifying large samples or biomass that generates a large amount of smoke. This product comes with two sample trays suitable for a large combustion chamber and a tray insertion and removal handle. The smoke generated from the samples burned in the furnace is processed by a reburning device before being exhausted through the chimney. 【Standard Specifications (Partial)】 ■ Operating temperature: 700°C (maximum temperature: 800°C) ■ Furnace volume: 28L ■ Reburning rate: up to 40g of carbon per ash amount ■ Comes with a two-tier sample rack and a tray for insertion and removal with a handle ■ Programmable 8-segment temperature controller EPC3016P1 *For more details, please refer to the related links or feel free to contact us.
Increasing the surface area of the sample materials exposed to the atmosphere within the work area helps shorten reaction time and improve overall yield!
The "TSR Rotary Kiln Series" consists of a split tubular furnace installed horizontally on a base frame and is equipped with a friction drive rotation system, allowing the working tube to rotate at a maximum of 10 rpm. The frame can be manually tilted up to 6° to meet the requirements of the materials being processed. The working tubes of the accessories can be easily replaced according to the physical or chemical requirements of the process. 【Overview】 ■ Maximum temperature: 1150℃ ■ Heating length: 1000mm ■ Operating direction: Horizontal ■ Reactor vessel diameter: 125mm ■ Number of heating zones: 1 zone and 3 zones *For more details, please refer to the related links or feel free to contact us.
Compatible with various diameters of tubes in a single furnace! The work tube itself can be easily replaced.
The "TG Temperature Gradient Tube Furnace" is a product specially designed to provide a temperature gradient along the length of the heating zone. It uses freely radiating wire elements embedded within the furnace's insulation as heaters. The advantage of this design is its flexibility. By using a tube adapter, various diameters of tubes can be used in the same furnace. 【Overview】 ■ Maximum temperature: 1200℃ ■ Heating length: 425,600mm ■ Usage direction: All models can be used horizontally and vertically ■ Maximum outer diameter of working tube Ø: 60,125mm ■ Number of heating zones: 2 zones or 3 zones *For more details, please refer to the related links or feel free to contact us.
We quickly dry small test materials. It is a conveyor-type drying furnace. We have a track record of deliveries to major steel manufacturers.
This is a drying furnace that uses a metal belt on the in-furnace belt. It is equipped with an air knife to remove water droplets just before entering the furnace.
The Instron temperature chamber and atmospheric furnace are compatible with temperature environments up to 1600°C.
We would like to introduce our "constant temperature bath" and "atmospheric furnace," which can test the mechanical material properties of materials and components in temperature environments up to 1600°C. The "constant temperature bath" is a device used to evaluate material properties in a wide range of test temperature environments other than room temperature. In the "atmospheric furnace," the three-zone resistance wire winding (furnace) allows for quick and easy attachment of test specimens due to its segmented structure. 【Product Lineup】 ■ Constant Temperature Bath ■ Atmospheric Furnace ■ Custom Environmental Equipment *For more details, please refer to the related links or feel free to contact us.
Compact yet capable of reaching temperatures from room temperature to 1000°C in about 10 minutes. It is an electric furnace that allows for the installation of heated materials, can accommodate them inside the furnace, and is capable of vacuum and gas replacement within the furnace.
It is an electric furnace equipped with a liftable stage, allowing the heated object to be placed on a ceramic fiber base and housed inside the furnace, which can achieve vacuum and gas replacement. 【Features】 ○ Compact design that allows for easy firing tests ○ Complete with connection ports necessary for firing tests ○ User-friendly manual operation For more details, please contact us or download the catalog.
By making the degreasing chamber, sintering chamber, and cooling chamber independent and automatically transporting them, the waiting time for changes in processing conditions for each stage is significantly reduced.
By making the degreasing chamber, sintering chamber, and cooling chamber independent and automatically transporting them, we significantly reduce the waiting time for changing processing conditions in each step. While processing the preceding work, we can prepare the processing conditions for the next work, enabling rapid consecutive condition changes for works with different processing conditions, which is effective for producing a variety of small lots. The hydraulic press mechanisms equipped in each chamber minimize thermal expansion during the degreasing, sintering, and cooling processes, and the atmosphere in each chamber is purged with N2 or H2 gas, preventing oxidation of the workpieces along with the high sealing performance of the entire system.
We will design the specifications specifically to meet your requirements!
The "Walking Beam Type Continuous Hardening Furnace / Conveyor Chain Type Continuous Tempering Furnace" can burn at the same air ratio throughout the combustion area using the nozzle mix method. It adopts a transportation method suitable for products with special shapes, such as cylinders. With a systematized operation, it does not require skill or intuition for operation. 【Features】 ■ Adopts a transportation method suitable for products with special shapes, such as cylinders ■ Can burn at the same air ratio throughout the combustion area using the nozzle mix method ■ Improves temperature distribution with temperature control in 4 zones for the hardening furnace and 5 zones for the tempering furnace ■ Systematized operation does not require skill or intuition for operation *For more details, please refer to the PDF document or feel free to contact us.
Introducing compactly designed products that are perfect for reflow small furnaces!
We would like to introduce our "desktop reflow oven." It features five infrared heaters on both the top and bottom. Each heater can be individually controlled for temperature, making it suitable for reflowing small circuit boards. Additionally, we also offer an N2 specification separately. Please feel free to contact us if you are interested. 【Features】 ■ Suitable for small-batch production of various types ■ Compact design ■ High-precision temperature distribution *For other functions and details, please contact us.
Compact, low-cost, and highly versatile! It features an upper and lower heater system that delivers excellent work efficiency.
We offer a low-cost "Tabletop Universal Heating Furnace" that accommodates various heating, curing, and drying needs. It can also be used as a test machine for new product development and design purposes. With the adoption of the instant heating far-infrared heater QUT heater, it achieves rapid temperature rise. Please feel free to contact us when you need assistance. 【Features】 ■ Inline capability with the adoption of a net conveyor system ■ Achieves rapid temperature rise with the instant heating far-infrared heater QUT heater ■ Excellent work efficiency with upper and lower heater system (lower heater is optional) * Temperature control has 4 circuits when set with the lower fire option. * For other functions and details, please contact us.
The furnace length is short and the temperature can be adjusted up and down, making it suitable for data collection before mass production!
The "desktop reflow oven" is used for substrate preheating and soldering processes. Recently, it has increasingly been used for destructive testing applications. The temperature curve maintains 160°C to 180°C (first stage) and 240°C to 260°C (end of irradiation). Depending on the shape of the substrate, a combination with hot air can also be proposed. Additionally, due to its short furnace length and adjustable upper and lower temperatures, it is suitable for data collection before mass production, and it is a popular model known for its high-precision temperature distribution and compact design. [Recommended Machine] ■ Product Name: Desktop Reflow Oven ■ Model: USTR-1210-NET III ■ Heat Source Used: Ultra Thermo III A, 5 sheets each for upper and lower *For more details, please refer to the related links or feel free to contact us.
![[Case Study] Heating of Metal Jigs](https://image.mono.ipros.com/public/product/image/284/2001428524/IPROS08640455220986295948.jpeg?w=280&h=280)
With PID control and 4-zone temperature regulation, it is possible to create the desired temperature profile!
We would like to introduce a case study of "Heating of Metal Jigs." Heating of jigs that hold automotive electronic components. The surface temperature of the jig is maintained at 120°C using far-infrared heating, and solid wax is applied before placing the workpiece for the next process. During mass production, it will be expanded to a conveyor furnace. The workpiece is a metal jig (special steel). 【Recommended Machine】 ■ Product Name: Standard Tabletop Heating Furnace ■ Model: STH-14Q ■ Heat Source Used: Quick Ultra Thermo QUT60 + Lower Far-Infrared Rod Heater ■ Features - Adoption of quick-response far-infrared heater allows for reduced preheating time - PID control and 4-zone temperature adjustment enable the creation of desired temperature profiles *For more details, please refer to the related links or feel free to contact us.
![[Delivery Example] Resin Sealing of Relays](https://image.mono.ipros.com/public/product/image/e6d/2001428535/IPROS07860973041641727623.jpeg?w=280&h=280)
It is possible to significantly reduce the heating time from 1 hour to 15 minutes! This will lead to improved quality.
To seal the case of the relay (contactor), which is an electronic component, epoxy thermosetting resin is used. Traditionally, heating was done for one hour in a hot air batch furnace, but by automating the inline process, we can reduce the labor involved in loading and unloading from the batch furnace and eliminate the variability in handling time through mechanization, leading to improved quality. Additionally, by switching from hot air to far-infrared heating, the heating time can be significantly reduced from one hour to 15 minutes. Far-infrared radiation heating minimizes the deterioration of the workplace environment caused by hot air. [Recommended Machine] ■ Product Name: Resin Curing Furnace ■ Model: SFP-03L ■ Heat Source Used: Ultra Thermo L III A x 3 panels ■ Features - Compatible with curing various resins - Compact size for easy mobility, floor-mounted - Temperature control through 3 zones allows for the creation of desired temperature profiles *For more details, please refer to the related links or feel free to contact us.
![Guide to Introducing Far Infrared Tabletop Heaters [Free Case Study Available]](https://image.mono.ipros.com/public/product/image/2001585055/IPROS6682463241207460923.png?w=280&h=280)
Heating, curing, and drying all in one! Far infrared tabletop heating furnace introduction guide.
Batch-type hot air heating furnaces, which are widely used in production sites, have the disadvantage of long heating processing times and requiring a lot of manual labor. TPR Corporation's "Far Infrared Tabletop Heating Furnace" adopts the unique far infrared heater QUT Quick Ultra Thermo, which has the potential to dramatically shorten the heating processing time for resin and rubber workpieces. If the heating processing time can be reduced, inline processing will also be possible. We are currently offering limited-time examples of time-saving results achieved with the "Far Infrared Tabletop Heating Furnace." If you are interested, please download from the "PDF Download" link below.
A hot air circulation pit furnace optimal for processes such as cooling, crystallization, preheating, curing, and the manufacturing of tools.
In a vertical hot air circulation pit furnace, it is suitable for annealing in an argon atmosphere within the temperature range of 450°C to 850°C.
Rapid heating at approximately 50°C/sec using focused light heating method, with the possibility of rapid cooling when the heating lamp is turned off. Compatible with various atmospheres.
The "IR Series" (IR Series) of focusing heating furnaces manufactured by Yokokura Seisakusho, used by various research institutions around the world, is an IR image furnace that utilizes near-infrared focusing heating. It features a clean environmental structure that allows for ultra-fast heating and cooling. The product lineup includes the "IR-HP (6 Parabolic Radiation)," which dramatically expands the temperature distribution area compared to conventional heating furnaces with rapid heating and cooling from six directions; the "IR-QP (4 Elliptical Shared Focusing)," which offers double the temperature distribution area and rapid heating compared to conventional heating furnaces with rapid heating and cooling from four directions; and the "IR-TP (2 Elliptical Shared)," which enables microscopic observation compared to conventional heating furnaces with rapid heating and cooling from two directions. 【Main Features】 - Clean, energy-efficient, high performance - Vacuum and gas replacement + observation - High-speed heating with low power (1500°C in 30 seconds with only 4kW) - Heater uses tungsten filament with a high heating temperature of 3400K - Watt density is 10 to 20 times higher than nichrome heaters - Real-time temperature control available - Compact size For more details, please contact us or refer to the catalog.
![Budget Application Catalog 2026 Latest Edition [For Budget Applications for Development and Research Funding!]](https://image.mono.ipros.com/public/product/image/225361/IPROS16405735417768940864.png?w=280&h=280)
2026 Latest [Budget Application Catalog] Renewed for easier selection and comparison based on feedback from the field.
The latest budget application catalog from Yonekura Manufacturing has been completed. Based on feedback from the field, it has been revamped to be easier to select and compare. From considering new heating devices and experimental equipment to creating application forms, you can check the necessary information in the "shortest distance." Please make use of the latest catalog for this year's budget planning. <p>Experimental videos are available on the <a title="Yonekura Manufacturing Co., Ltd. Official YouTube" href="https://www.youtube.com/@yonekura_mfg_jp">official YouTube channel</a>.<br /><br /><span>For more details, please check each product page. We also welcome inquiries for customizations tailored to your tests, so feel free to contact us.</span></p>
Achieving automation from the application of moisture-proof agents to drying! Contributing to improved production efficiency and odor control within the factory.
In the drying process after applying moisture-proof agents (such as HumiSeal) to substrates, many sites are considering switching from traditional natural drying to automation to improve production efficiency. By using application machines and drying ovens in such cases, automation can be achieved. 【Features】 ■ Conveyance height (effective height of components) adjustable up and down by 100mm It is possible to directly load substrates with tall components into the drying oven. ■ Conveyance speed can be adjusted from 0.5 to 2.0 m/min, accommodating a wide range from short drying times to extended drying periods. ■ Odor recovery is possible through exhaust ducts, contributing to odor control within the factory.
