We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Heater Product List and Ranking from 469 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.

Heater Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.

  1. プロヒート ヒーター事業部 Aichi//Industrial Machinery
  2. 西都電機 Osaka//equipment
  3. 日本ヒーター Tokyo//Industrial Electrical Equipment
  4. 4 Sakae Corporation Onishi Factory Gunma//Machine elements and parts
  5. 5 新日電熱工業 Osaka//Machine elements and parts
Go to Company Ranking

Heater Product ranking

Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.

  1. For autonomous driving sensors! Film heaters to prevent malfunctions caused by snow accumulation.
  2. From room temperature to 1200°C in about 150 seconds! High-speed high-temperature cartridge heater. 三洋熱工業
  3. High-temperature cartridge heater Sakae Corporation Onishi Factory
  4. 4 Near-infrared paint dryer Promo Series [Immediate heating of the irradiation section is possible] トーコー
  5. 5 Cartridge Heater "PCH" プロヒート ヒーター事業部

Heater Product List

1966～1980 item / All 2531 items

Displayed results
Unable to withstand the flow, cracks occurred, leading to insulation failure [Case Study on Problem Solving]

Unable to withstand the flow, cracks occurred, leading to insulation failure [Case Study on Problem Solving]

Introducing a case solved with our special flange heater!

We would like to introduce a case study that solved the issues faced by an engine and machinery manufacturer regarding flange heaters. The company was experiencing insulation failures in heaters used for engine cooling, but by reviewing the design and conducting repeated tests, the problem was resolved. 【Do you have any of these concerns?】 ■ Cracks occurred due to inability to withstand the flow rate, leading to insulation failures. Our special flange heaters were able to solve this issue, so if you are facing similar problems, please feel free to contact us. *For more details, please refer to the PDF document or feel free to reach out to us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Due to the deformed mold, temperature unevenness occurs with conventional heaters [Case Study of Problem Solving].

Due to the deformed mold, temperature unevenness occurs with conventional heaters [Case Study of Problem Solving].

We will introduce a case where there were temperature variations in the mold, and the sealing process did not go well, but we succeeded in achieving uniform heating!

We would like to introduce a case study that solved the issues with cartridge heaters for a packaging machine manufacturer. In this company, due to the use of a variable mold, conventional heaters caused temperature inconsistencies, resulting in poor sealing quality. To address this, we implemented an irregular pitch division with a single heater. By repeatedly conducting actual machine tests and determining the optimal winding dimensions and ratios, we resolved the problem. <Do you have any of these issues?> ■ Due to the variable mold, conventional heaters cause temperature inconsistencies, making it difficult to achieve a clean seal. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
A must-see for those struggling with selecting various heaters! *Heater selection guide available.

A must-see for those struggling with selecting various heaters! *Heater selection guide available.

For those considering a heater, we provide a clear overview from basic knowledge about various heaters to frequently asked questions in a list format! *Materials available upon request.

The features of the heater division of FCC Corporation are its strengths in low-volume production and quick turnaround times. We propose the best heater components for various scenes. Because FCC manufactures and sells a wide variety of heaters, replacements are possible! Starting with "Product Comparison," we provide basic knowledge about "Sealed Heaters," "Cartridge Heaters," "Band Heaters," and frequently asked questions. If you are considering heaters, please read this as a reference. [Contents] ■ Product Comparison ■ Basic Knowledge of Sealed Heaters ■ Basic Knowledge of Cartridge Heaters ■ Basic Knowledge of Band Heaters ■ Basic Knowledge of Space Heaters ■ Basic Knowledge of Aluminum Cast Heaters ■ Basic Knowledge of Aluminum Foil Heaters ■ Basic Knowledge of Silicone Rubber Heaters ■ Frequently Asked Questions *For more details, please refer to the PDF document or feel free to contact us.

  • Aluminum heater
  • Silicon Heater
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
FF type warm air fan heater 'SS-5 Plus/SS-5'

FF type warm air fan heater 'SS-5 Plus/SS-5'

Hammer tone coating! Creates a comfortable space with minimal temperature variations due to warm air and radiant heat emission!

The "SS-5 Plus/SS-5" is a FF-type warm air fan heater manufactured by Saikai Sangyo, which we handle. The "SS-5 Plus," equipped with an air curtain function that minimizes glass fogging, uses Kyoto-produced cypress for its legs. The "SS-5" is available in black and red color variations. It creates a comfortable space with minimal temperature unevenness through warm air and radiant heat. 【Features (SS-5 Plus)】 ■ Hammer tone finish ■ Air curtain function that minimizes glass fogging ■ Legs made of Kyoto-produced cypress ■ Heating capacity: 15 to 35 tatami mats (17 tsubo) ■ Color: Black * For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Seed heater

Seed heater

Molded insulation of pipe terminals with neoprene rubber! We manufacture various types of sea heaters with excellent water resistance.

The "sheath heater" has a wide range of applications, including in refrigerated and frozen display cases and vending machines. Our company manufactures defrost heaters, drain pan heaters, and cord heaters for supermarket display cases. The ends of the pipes are molded and insulated with neoprene rubber, providing excellent water resistance. 【Processing Range】 ■ Pipe materials: Inconel, SUS321, aluminum depending on the application ■ Pipe diameters: φ10mm, φ8.0mm ■ Total length: 0.5 to 4.1m *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cast iron vacuum-type hot water heater "RKV/MFV Series"

Cast iron vacuum-type hot water heater "RKV/MFV Series"

Vacuum-type safety design! A resource-saving boiler made of long-lasting cast iron that can be used semi-permanently.

The "RKV・MFV Series" is a cast iron vacuum-type hot water heater that incorporates gas-fired microcomputer control, further enhancing safety and ease of use. The heater body is made of high-quality cast iron known for its density and corrosion resistance, making it highly effective against corrosion on both the water and gas sides, allowing for semi-permanent use as a resource-saving model. 【Features】 ■ Oil-fired/Gas-fired heater ■ Exceptional longevity due to cast iron construction ■ Energy-saving design with heater efficiency of 91% ■ Safe design with vacuum type ■ Equipped with multifunctional microcomputer control "Heater Controller" *For more details, please refer to the PDF materials or feel free to contact us.

  • Boiler

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lamp heater "Pure Tan Heater"

Lamp heater "Pure Tan Heater"

An electric heater boasting impressive high power with high output and high efficiency.

The "Pure Tan Heater" is an infrared lamp heater developed using tube manufacturing technology. A thin sheet of high-purity carbon fiber is sealed in a heat-resistant quartz tube along with an inert gas. The carbon heating element (filament) can be designed for high temperatures of up to several thousand degrees Celsius. The module heat generated by passing current through the resistor can be obtained in a very simple manner, and there is a high degree of design freedom in terms of output and shape, offering many advantages compared to gas heating methods. 【Features】 ■ Long lifespan ■ Excellent radiation efficiency ■ No inrush current ■ Quick and precise temperature control possible ■ Resistant to thermal shock, so it does not break even if water splashes on it while lit *For more details, please refer to the catalog or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Submersible Heater

Submersible Heater

Insert the heating element and heat directly! A representative element used for fluids and gases.

The "Immersion Heater" is a type of heating element that directly heats liquids and gases by inserting the heating part into the desired container. The metal pipe material of the sheath heater is made of copper, iron, stainless steel, etc., and is configured according to the intended use, such as industrial water, drinking water, or oil. Additionally, various coating treatments are applied to the pipe surface to enhance chemical resistance and accommodate diverse applications. We also manufacture units equipped with thermostats (temperature controllers) to control heating. 【Features】 ■ The heating part is constructed with a sheath heater that has the required shape, length, and capacity. ■ The heating part is inserted into the desired container to directly heat liquids and gases. ■ Various coating treatments are applied to the surface of the sheath heater's pipe to enhance chemical resistance and accommodate diverse applications. ■ Units with thermostats (temperature controllers) for controlling heating are also available. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • others

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Far infrared heater

Far infrared heater

Powerful spot heating with a structure that directly heats the heating element. A distinctly different warmth from radiant heat.

This product is a spot heater that directly warms the human body and indoor spaces with radiant heat. It has a structure that heats the heating element directly, minimizing energy loss. Additionally, since it does not use a combustion method, there is no concern about dangerous conditions such as oxygen deficiency due to incomplete combustion, allowing for safe use. 【Lineup】 ■ Wall-mounted type SDHB model ■ Ceiling-hanging type SDHL model ■ Ceiling-embedded type SDHY model *For more details, please refer to the PDF document or feel free to contact us.

  • air conditioning

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Oil Preheater "OHP Type"

Oil Preheater "OHP Type"

This is the definitive version of an ideal preheater, further improved from the conventional OH type.

This product is the definitive version of an ideal preheater, further improved from the conventional OH type, and is a new model that is even easier to use. The thermostat features a dial with variable scales, allowing the heater to be directly controlled by the thermostat. A magnet switch is not necessary. It can be used with A, B, or C heavy oil simply by aligning the scales. Upon request, we can design and manufacture waterproof types, increased pressure types, high-pressure types, burner-mounted types, and marine types. 【Lineup (excerpt)】 ■OHP-15 ■OHP-30 ■OHP-45 ■OHP-60 *For more details, please refer to the PDF document or feel free to contact us.

  • air conditioning

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Strengths of Minko products (Heaters, Controllers, Sensors)

Strengths of Minko products (Heaters, Controllers, Sensors)

Introduction to the strengths of heater, controller, and sensor.

This document introduces the strengths of Minko's heaters, controllers, and sensors. We provide solutions to customer challenges by utilizing individual manufacturing technologies such as "factory attachment technology" that achieves reliable attachment on complex surfaces, "compact assembly manufacturing technology," and "surface mount technology," as well as innovations in design and the integration of multiple products. [Strengths] - Freedom of shape - Flexible design of resistance density distribution and number of circuits - Integration of heaters and sensors - Factory attachment of heaters to complex shapes - Compliance with various standards (especially for sensors) *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Kito Kōsan Co., Ltd. Business Introduction

Kito Kōsan Co., Ltd. Business Introduction

Business introduction of Kito Kousan Co., Ltd., which handles refractory materials, furnace materials, and ceramic fibers.

Our main product, ceramic fiber, comes in various forms suitable for maximum usage temperatures ranging from 1000°C to 1800°C. It is used for a variety of applications, including as an asbestos substitute and as a raw material for composites made of metals and ceramics. We also engage in secondary processing and furnace construction projects. 【Sales Items】 ■ Sales of refractory materials, insulation materials, ceramics, and heating materials ■ Various processing and construction equipment *For more details, please download the PDF or feel free to contact us.

  • Ceramics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Contribute to energy saving and safety! Why not reassess the "heat" on site and improve efficiency?

Contribute to energy saving and safety! Why not reassess the "heat" on site and improve efficiency?

It helps save energy in buildings and factories by reducing heat radiation from heating equipment and piping!

This product helps to reduce heat radiation from heating equipment and piping, contributing to energy savings in buildings and factories. Detachment work can be done easily and in a short time, reducing maintenance costs. It is applicable for thermal insulation, energy saving, and burn prevention for heating furnaces, piping, etc., and you can choose materials according to your needs. Additionally, it has excellent heat resistance and can be reused multiple times. ■ Installation Locations Pharmaceutical and Food Industry: Steam piping, hoppers and piping in the stage of dissolving raw materials, etc. Semiconductor Industry: Plant piping, inside manufacturing equipment, etc. 【Materials】 ■ Outer Material: Fluororesin-impregnated glass cloth, silicone glass cloth, aluminum glass cloth ■ Inner Material: Fluororesin-impregnated glass cloth, glass cloth, silica cloth ■ Insulation Material: Glass mat, rock wool ■ Fastening Material: Velcro (polyester, PPS), glass cord *For more details, please refer to the PDF document or feel free to contact us.

  • f-1060-2019.07.23-1119.jpg
  • f-1053-2019.07.23-1109.jpg
  • Piping Materials

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Food processing machine "Far Infrared Super Fryer"

Food processing machine "Far Infrared Super Fryer"

Shortened cooking time with far infrared effect!

The far-infrared super fryer is a food processing machine that quickly raises the core temperature due to internal resonance heating from infrared effects, resulting in crispy fried foods. Internal resonance heating raises the center temperature of ingredients quickly, similar to a microwave, leading to better oil drainage and an upgrade in the quality of fried foods, even with the same ingredients. 【Features】 ■ Significant reduction in running costs ■ No oil smoke ■ Easy to clean ■ One-touch panel operation *For more details, please download the PDF or feel free to contact us.

  • Food Processing Equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Heater

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.