We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Heater Product List and Ranking from 476 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Jul 29, 2026～Aug 25, 2026
This ranking is based on the number of page views on our site.

Heater Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jul 29, 2026～Aug 25, 2026
This ranking is based on the number of page views on our site.

  1. 東立電機 Kanagawa//Industrial Electrical Equipment
  2. 西都電機 Osaka//equipment
  3. 日本ヒーター Tokyo//Industrial Electrical Equipment
  4. 4 三洋熱工業 Aichi//Industrial Electrical Equipment
  5. 5 坂口電熱 Tokyo//Industrial Electrical Equipment
Go to Company Ranking

Heater Product ranking

Last Updated： Aggregation Period:Jul 29, 2026～Aug 25, 2026
This ranking is based on the number of page views on our site.

  1. Tōritsu Electric Co., Ltd. Business Introduction <Variety and Small-Batch Production Factory> 東立電機
  2. Super High-Temperature Heater 'STS-1100' 三洋熱工業
  3. Heater with radio wave permeability for ADAS/automated driving sensors!
  4. 4 Aluminum billet heating / Permanent magnet type "Magnet Heater" 日鉄物産マテックス
  5. 5 Transparent film heater Heat Lab. Corporation

Heater Product List

991～1020 item / All 2750 items

Displayed results
Shrink Heater "FPS Cyclone"

Shrink Heater "FPS Cyclone"

Temperature, air volume, and control can be adjusted for each zone! Hot air circulation type shrink heater.

The "FPS Cyclone" is a shrink heater that allows for temperature, airflow, and control by zone. Using a hot air circulation method (reducing energy efficiency by 20% compared to conventional machines), the shutter can be opened and closed externally, allowing for full closure, full opening, and half opening. 【Features】 ■ Front and rear sliding mechanism of the shutter with a movement range of 25mm x 2 Bringing the shutter closer to the workpiece stabilizes the shrinkage. ■ By enveloping the entire workpiece in hot air at the FPS Cyclone section, it provides a gentle final finish to the film. ■ Shrink adjustment can be easily performed. ■ Cap shrinkage can be stably performed using the upper and sliding mechanisms. *For more details, please download the PDF or feel free to contact us.

  • Shrink Wrapping Machine
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Chalkboard sheet

Chalkboard sheet

Stylish! Practical! Just stick it on, it's easy!

Chalkboard sheets can easily be turned into a chalkboard just by cutting and sticking them to your desired size. They can also be used for simple message notes, but the possibilities are endless. These are sturdy, thick sheets that can be peeled off and stuck on like a sticker! Additionally, they are designed to be less prone to wrinkling and easy to apply. Why not create a wonderful personal space with handwritten letters and drawings? 【Features】 ■ Available in two colors: green and black ■ Usable with materials like chalk and pastels ■ Can be rewritten as many times as needed ■ Written letters and drawings can be easily erased with a chalkboard eraser or towel *For more details, please download the PDF or feel free to contact us.

  • Office supplies and stationery
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[All-Electric Construction Case Studies] EcoCute and IH Cooking Heaters

[All-Electric Construction Case Studies] EcoCute and IH Cooking Heaters

To ensure that our customers can purchase with confidence, we are sharing installation examples!

On our website, we introduce many examples of installations for eco-cute and IH cooking heaters. We have photos of installations in narrow or difficult spaces, as well as a case where a two-port adapter for a bathtub was replaced with a single port. Please check the photos for detailed explanations. 【Case Overview】 ■ Eco-Cute ■ IH Cooking Heater *For more details, please refer to the PDF materials or feel free to contact us.

  • Other heaters
  • Generators and transmission motors
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flat base heater

Flat base heater

The heated object can be heated up to 600℃! A high-performance, long-life heater that replaces conventional band heaters.

The "Flat Base Heater" is a product that utilizes our unique technology to process the sides of conventional micro ring heaters into a flat shape. While inheriting the characteristics of traditional micro heaters, the addition of a flat surface allows for higher thermal efficiency, especially when shaped to wrap directly around the object being heated. With excellent thermal conductivity, the flexible heater body can easily adhere to any surface. 【Features】 - Lightweight and thin (3mm), with the lead wire exit direction that can be freely bent for use. - Completely sealed, preventing the entry of melted resin, oil, etc., eliminating concerns about disconnection failures. - Capable of high-temperature design (10W/cm²), allowing for continuous use at a regular temperature of 600°C for the heated object. - With excellent thermal conductivity, the flexible heater body can easily adhere to any surface. *For more details, please refer to the PDF document or feel free to contact us.

  • Other processing machines
  • Other electronic parts
  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NNH band heater

NNH band heater

Maximum surface temperature of the heater: 350℃! Introducing flexible-shaped heaters in cylindrical or rectangular forms.

The "NNH Band Heater" is a thin, cylindrical or rectangular heater. The heating element, made of nichrome wire, is insulated with heat-resistant mica plates. It is reinforced by being covered with metals such as stainless steel and bonded steel plates, enhancing its durability. Additionally, since the heater and band are integrated, installation onto a cylinder is very easy. It closely adheres to the object being heated, and is mainly used for heating in plastic molding machines, extrusion machines, and pipelines. 【Features】 ■ Flexible shapes in cylindrical or rectangular forms ■ Maximum surface temperature of the heater: 350℃ ■ Custom hole processing and notching available ■ Heater and band are integrated ■ Easy installation onto cylinders *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Other machine elements
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Ring-shaped cartridge heater that fits into a groove of P.C.D φ40.

[Example] Ring-shaped cartridge heater that fits into a groove of P.C.D φ40.

A thickness of φ4 and a restriction of P.C.D φ40! A case that was able to be delivered in 2 to 3 weeks.

We would like to introduce a case study of the "cartridge heater" that we handle. A company, Y, located in Higashi-Osaka, uses a ring-shaped heater in a groove with a P.C.D of φ40 for heating the bottom surface of their products. However, they had a concern that the delivery time took two months, and they wanted to obtain it a bit faster. After much trial and error, we finished a heater identical to the sample, received approval from the customer, and were able to deliver it within 2 to 3 weeks. [Case Overview (Partial)] ■ Consultation Details - Using a ring-shaped heater in a groove with a P.C.D of φ40 for heating the bottom surface of the product - The ring-shaped heater has a delivery time of two months, and they want to obtain it a bit faster - They want to obtain a heater identical to the sample within one month ■ Proposal - After much trial and error, we finished a heater identical to the sample for customer testing *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Example: Drying fruits using a seed heater.

Example: Drying fruits using a seed heater.

Uniform drying of a large amount of dried fruit! A case where productivity was increased.

We would like to introduce a case study of the "seed heater" that we handle. We received a request to create a large dryer that uses a seed heater to apply 60°C heat to fruits in order to make dried fruits. We discussed heat dissipation calculations, insulation methods, and how to circulate the air inside the dryer to ensure that every part of the dryer maintains the same temperature. As a result, we were able to uniformly dry a large quantity of dried fruits, thereby increasing productivity. [Case Overview] ■ Request - To create a large dryer that applies 60°C heat to fruits to make dried fruits. ■ Proposal - Heat dissipation calculations and insulation methods. - Suggestions for circulating air inside the dryer to ensure uniform temperature throughout. *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Bending processing of acrylic plates using a seed heater.

[Example] Bending processing of acrylic plates using a seed heater.

An example of distributing the winding at both ends to ensure uniform temperature at the center and both ends of the heat source!

Here is an example of the "seas heater" that our company handles. We received an inquiry from Company M in Nagoya City, asking to bend acrylic sheets of various sizes by applying heat of 160°C, with a heating section of 1000mm. In response, we proposed a seas heater with a diameter of 12mm and a length of 1040mm, rated at 200V and 1000W. The temperature of the jig became uniform, allowing for clean bending of acrylic sheets at any part of the jig, regardless of their size. [Case Overview (Partial)] ■ Inquiry Details - Want to bend acrylic sheets of various sizes by applying heat of 160°C - Need a heating section of 1000mm *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Example] Removing weld lines with a cartridge heater

[Example] Removing weld lines with a cartridge heater

The heating section is 20mm at the tip! There are no more weld lines, and this is a case where we were able to produce the product.

Here is an example of the "cartridge heater" that we handle. We received an inquiry from Company T in Aichi Prefecture regarding a product that had developed a weld line. They wanted to apply heat to eliminate it, but the area requiring heat was narrow, with a small diameter and a length of about 20mm at the tip. We proposed a cartridge heater with a diameter of 8mm and a length of 55mm (heating section 20mm), rated at 100V and 100W, with a 1m side lead. Since the heating section was only 20mm at the tip, the weld line was eliminated, allowing them to produce the product. [Case Overview (Partial)] ■ Inquiry Details - The product had developed a weld line, and they wanted to apply heat to eliminate it. - The area requiring heat was narrow, with a small diameter and a length of about 20mm at the tip. - The wiring extraction was also in a recessed area with a gap of less than 20mm. *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Case Study] Measures Against Resin Leakage Using Completely Sealed Nozzle Heaters

[Case Study] Measures Against Resin Leakage Using Completely Sealed Nozzle Heaters

Nozzle heater shorted! A case of purchasing a completely sealed nozzle heater.

Here is a case study of the "Nozzle Heater" that we handle. Due to resin leakage in the injection molding machine, resin entered the nozzle heater, causing a short circuit. They urgently needed a φ40×30mm nozzle heater from our stock. We proposed a completely sealed nozzle heater and a flat base heater. They purchased the completely sealed nozzle heater. [Case Overview] ■ Proposal - Completely sealed nozzle heater resistant to resin leakage φ40×30mm 220v210w - Flat base heater NMR-11 φ40×30mm 220v280w ■ Results - The frequency of replacements decreased compared to when they were using the previous nozzle heater, and productivity increased. - Since it was in stock, we could ship it the same day, which was greatly appreciated. *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Frequency Preheater "IMC-PH-V3 Series"

High Frequency Preheater "IMC-PH-V3 Series"

Ideal for molding machine parts with SMC/BMC and for molding tableware with melamine resin!

The "IMC-PH-V3 Series" is a high-frequency preheater that has significantly improved dust intrusion into the device by making major changes to the inlet structure and adopting polyester-based dust filters. It comes in roller electrode and parallel plate electrode types. Please feel free to contact us if you have any inquiries. 【Basic Concepts】 ■ Pursuit of safe operation ■ Pursuit of device stability ■ Ease of device operation ■ Suppression of wear and tear on consumable parts *For more details, please refer to the PDF materials or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Frequency Preheater 'IMCPH3F-V4/IMC-PH5F-V4'

High Frequency Preheater 'IMCPH3F-V4/IMC-PH5F-V4'

By utilizing the characteristics of each heating method, it is possible to use them according to thick meat products and thin skin products!

The "IMC-PH3F-V4/IMC-PH5F-V4" is a dedicated high-frequency preheater for producing "food samples." It can heat large food samples in a heating zone with a height of 150mm. The height adjustment of the heating zone can be easily done with a push button, making it very user-friendly. 【Features】 ■ Large gap between upper and lower electrodes allows heating of thick and tall products ■ Motorized elevation of the upper electrode allows for arbitrary electrode gap settings with just a push button operation ■ Upward and downward movement, door closure, and heating start can be controlled with left and right push buttons ■ Safety ensured with two-handed push button operation ■ Shield structure with BS components to reduce damage to shield fins *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-frequency preheater <for special applications>

High-frequency preheater <for special applications>

Introducing our high-frequency preheater equipped with a robotic hand!

We would like to introduce the high-frequency preheater from Aimex Corporation. It is equipped with a robotic hand for the transportation and insertion of tablets. There are also heating devices for large molded products such as food samples. Please feel free to contact us if you have any inquiries. 【Overview】 - A robotic hand is installed with the high-frequency preheater for the transportation and insertion of tablets. - For heating large molded products such as food samples. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fully automatic high-frequency preheater

Fully automatic high-frequency preheater

Introducing the fully automatic high-frequency preheater from Aimex Corporation!

We would like to introduce our fully automatic high-frequency preheater. We offer a lineup for discrete devices and automotive electronics. This product is an automation device for tablet handling and high-frequency heating. Please feel free to contact us if you have any inquiries. 【Lineup】 ■ For discrete devices - 3KW device for 3 pots ■ For automotive electronics - 3KW device for 1 pot (with built-in magazine) - 3KW device for 3 pots *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High Frequency Preheater 'IMC-PH3F-V4/PH5F-V4'

High Frequency Preheater 'IMC-PH3F-V4/PH5F-V4'

Essential for food sample production! Can be arranged vertically or horizontally for heating.

The "IMC-PH3F-V4/IMC-PH5F-V4" is a high-frequency preheater for heating PVC sol. It heats the sol with a high-frequency preheater and heats the surface of silicone molds or the sol using electric or gas ovens. This allows for rapid and nearly uniform heating of the inside and outside of the sol. By utilizing the characteristics of each heating method, it can be adapted for thick products and surface products. Please feel free to contact us if you have any inquiries. 【Features】 ■ The large gap between the upper and lower electrodes allows for heating of thick or tall products. ■ The appropriate electrode gap can be set each time with just a push-button operation. ■ The front door opening and closing reduces the risk of being pinched and significantly improves the shielding function of the radio waves. ■ Improved heating efficiency and significant enhancement of workability contribute to cost reduction. *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Far infrared heater *Customizable for extended furnace length

Far infrared heater *Customizable for extended furnace length

We can also make proposals based on a reverse calculation of production efficiency!

We would like to introduce the customization options for our standard product, the "CH Series." We offer customization to extend the furnace length based on your requirements, which improves production efficiency. It is also possible for us to make proposals based on reverse calculations from production efficiency, so please feel free to consult with us. 【We can solve the following issues】 ■ A dedicated drying furnace is needed for special processing ■ We want to improve production efficiency compared to now ■ There is no drying furnace that fits perfectly in the space ■ We want to consult from the design stage according to specifications *For more details, please download the PDF or feel free to contact us.

  • Drying Equipment
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Development of heaters for electric vehicles

Development of heaters for electric vehicles

Currently mass-producing while making improvements! Introducing our heaters for electric vehicles.

At Remix Corporation, we produce the "PTC Heater Unit" used in electric vehicles. The challenges in developing heaters for electric vehicles included high voltage and the development of components that can withstand high voltage. To address these challenges, we considered evaluation methods, evaluation content, and evaluation equipment, and through repeated prototyping, we completed the components for electric vehicles, leading to the commercialization of heaters for electric vehicles. [Our Technology Development] ■ Development of heaters for electric vehicles ■ Development of high-efficiency heaters *For more details, please refer to the related links or feel free to contact us.

  • Other Auto Parts
  • Other heaters
  • Ceramic Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Development of high-efficiency heaters

Development of high-efficiency heaters

High efficiency of insulated heaters! We have commercialized it and received orders from customers.

As a result of aiming for high efficiency in insulated heaters based on customer requests, we have developed a product and would like to introduce an example of an order received from a customer. Even after achieving high efficiency in the heater, ensuring insulation proved to be challenging, leading us to repeatedly review the specifications of the insulating materials for improvement. By selecting insulating materials that have good heat dissipation while maintaining insulation, we were able to achieve miniaturization of the heater, improvement in heater power consumption, and assurance of insulation. [Our Technology Development] - Development of heaters for electric vehicles - Development of high-efficiency heaters *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • Other Auto Parts
  • Ceramic Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Catalog Available] PTC Hot Air Heater

[Catalog Available] PTC Hot Air Heater

Compact, reliable, and safe hot air heater.

The PTC warm air heater utilizes PTC thermistors, which are used in various fields as constant temperature heating elements, current limiting devices, and temperature sensors. It has a structure that combines PTC elements with fin-shaped aluminum, allowing for high power extraction by passing air through it, and can supply high-temperature warm air. 【Features】 ■ No external temperature control is required for self-temperature regulation ■ Rapid temperature rise ■ Compact and easy to implement *For more details, please download the PDF or feel free to contact us.

  • Ceramic Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Semiconductor and LCD panel heater

Semiconductor and LCD panel heater

Temperature accuracy is achieved within ±2℃! There is no smoke or deformation due to high-temperature heating, and thermal expansion is minimal.

The ultra-thin panel heater from Hattori Heating is a heater that has a pattern punched and etched into a nichrome strip, with an insulating material sandwiched in between for heating formation. It is a resource-saving, energy-efficient ultra-clean heater that can be widely used in the fields of semiconductors, LCDs, and scientific instruments. 【Features】 ■ No smoke or deformation due to high-temperature heating, with a structure that minimizes thermal expansion ■ Achieves a temperature accuracy within ±2℃ ■ Sizes of 2500×2500mm or larger can be produced *For more details, please contact us or download the PDF for more information.

  • Other semiconductors
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cartridge heaters compatible with outer diameter sizes from Φ3.1 to over Φ30.

Cartridge heaters compatible with outer diameter sizes from Φ3.1 to over Φ30.

Balance winding and cartridge heaters with built-in thermocouples are also available!

Our cartridge heaters are compatible with outer diameters ranging from Φ3.1 to Φ30, and we can also accommodate balance winding and thermocouple-integrated cartridge heaters. A cartridge heater is a high-power density rod heater that wraps a heating wire (nichrome wire) around a rod-shaped core, inserts it into a pipe, and seals the gap between the heating wire and the pipe with MgO, which has excellent thermal conductivity and high insulation properties. Typically, cartridge heaters are used by inserting them into holes in heating plates, but they can also be utilized for water heaters, steam applications, and vacuum use by attaching flanges or screw bushings. They can be used in plastic processing machines, automatic packaging machines, etc., and can be adapted for liquid use by providing suitable fittings such as flanges. We can manufacture models with fins, L-shaped designs, thermocouple integration, dual circuits, triple circuits, and distributed winding. 【Features】 ■ Inserted through the inlet provided in the metal part for use ■ Suitable for plastic processing machines, automatic packaging machines, etc. ■ Can also be used for liquid applications *For more details, please refer to the PDF document or feel free to contact us.

  • 2020-01-09_13h51_58.png
  • 2020-01-09_13h52_02.png
  • 2020-01-09_13h52_08.png
  • 2020-01-09_13h52_12.png
  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hot tube (heating tube)

Hot tube (heating tube)

The surface temperature is low, making it safe to use! Ideal for the insulation and heating transfer of fluids with a high frequency of tube replacement.

The "Hot Tube (Heating Tube)" is a product that can be used as a detachable type by inserting a separate tube, as both ends have a tube outlet shape. The nichrome wire, which is the heating element, is evenly wound throughout the entire hose, resulting in minimal variation in the inner wall temperature distribution, with a temperature range capable of heating from 0°C to a maximum of 500°C. The material of the hose is primarily made of flame-retardant and non-combustible materials depending on the conditions, and the insulation material is selected for its high thermal insulation effect, allowing for safe use with a low surface temperature. 【Features】 ■ Hot power MAX. 500°C ■ Minimal variation in inner wall temperature distribution ■ Suitable for the insulation and heating transfer of fluids with a high frequency of tube replacement ■ Safe design *For more details, please refer to the PDF document or feel free to contact us.

  • hose
  • tube
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicone rubber heater (hook spring type) can be produced from 1 piece.

Silicone rubber heater (hook spring type) can be produced from 1 piece.

With a standard thickness of 1.5mm and a thin sheet form, it offers excellent flexibility and fits perfectly on heated objects such as curved surfaces and cylinders!

The silicone rubber heater (hook spring type) is a heater that fits perfectly to heated objects such as curved surfaces and cylinders. <Features> - With a standard thickness of 1.5mm, it is a thin sheet that offers excellent thermal responsiveness. - If there is a flat shape, we can design it to match any shape of the heated object, including circular and hole-punched designs. (No mold costs are required for patterning resistance. Etching types will require plate costs.) - Thanks to a special manufacturing method, we can produce orders starting from one piece in a short period. - It can be used at a continuous temperature of 200°C with a long lifespan. - The HT type has heat resistance up to 260°C with a new silicone material.

  • 写真?-2.JPG
  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Plate heater (hot plate)

Plate heater (hot plate)

Uniformly heat the object being heated! It is also possible to make holes in the heater!

The "plate heater" is a flat heater designed for heating plates and flat molding. It is a plate-shaped device sealed with heat-resistant metal steel plates. ■ Plate Heater - Used as a flat heater for heating plates and flat molding - Utilized for cylinder heating in plastic injection molding, extrusion machines, preventing condensation in control panels, pipeline heating, etc. - Capable of surface heating of the heated object (flat body) or inserting heating between metal plates *For more details, please refer to the PDF document or feel free to contact us.

  • Heating device
  • Other heaters
  • Ceramic Heater
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Waterproof type seed heater with high insulation performance that lasts for a long time!

Waterproof type seed heater with high insulation performance that lasts for a long time!

Can be used in temperature environments from -30℃ to 60℃, suitable for high humidity locations and for refrigeration and freezing equipment! Also ideal as a defrosting heater.

This is a waterproof type of series heater that has been molded with chloroprene rubber at the terminal end. It is widely used as a heater for high humidity environments! Our waterproof heaters are extensively used in refrigeration and cooling equipment due to their technology and high quality. 【Features】 The terminal part is molded with a specially formulated chloroprene rubber, which allows for high insulation performance to be maintained for a long time in high humidity environments. It can be used in temperature environments ranging from -30°C to 60°C. We have a range of products available for different applications, so please take a look. *For more details, please refer to the PDF document or feel free to contact us!

  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater with enhanced heat dissipation! Fin-equipped sheath heater.

Heater with enhanced heat dissipation! Fin-equipped sheath heater.

A heater that is closely integrated with the heater to enhance heat dissipation effects, achieving high efficiency in both natural convection and forced air circulation!

The finned heater integrates fins closely around the outer circumference of the sheath heater to enhance heat dissipation. Due to its high heat dissipation efficiency, it demonstrates high efficiency in both natural convection and forced air circulation, and it can be relatively easily bent, making it suitable for use in duct heaters, dryers, and other applications. 【Features】 - It has better heat dissipation efficiency than sheath heaters without fins, allowing for lower surface temperatures of the heater. - Bending can be customized according to the installation equipment. - It is mainly used for gas heating applications, typically heating up to around 450°C. *For more details, please refer to the PDF document or feel free to contact us.

  • Heating device
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Industrial heater

Industrial heater

If you have any issues regarding heaters, please feel free to consult us.

Our company is an industrial heater manufacturer that was established in Amagasaki City, Hyogo Prefecture. We specialize in small lots and short delivery times. If you have any concerns regarding heaters, please feel free to consult us. 【Business Activities】 ■ Manufacturing and sales of industrial heaters (ceramic far-infrared sheath heaters, aluminum casting, fins, bosses, flange heaters, band heaters, cartridge heaters, and all other types of industrial heaters) ■ Transparent film heater "Miru" ■ Inter-industry exchange "Amagasaki Jiya Hachikai" panels, processing, can manufacturing, pressing ■ Electric heating equipment materials ■ Industrial instruments ■ Drying ovens ■ Energy saving and engineering ■ Insulation wiring construction *For more details, please download the PDF or feel free to contact us.

  • Other heaters
  • Contract manufacturing
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Gas-fired diatomaceous earth pizza oven "Dogama K3"

Gas-fired diatomaceous earth pizza oven "Dogama K3"

Intense firepower! A pizza oven that handles temperatures over 600℃.

The "Dogama K3" is a pizza oven that excels in insulation, moisture retention, and absorption due to its numerous air holes made of diatomaceous earth, allowing for control of the ideal temperature and humidity for baking pizza. It features a special grill plate that has excellent heat retention, maintaining a high temperature for continuous baking. It can also handle heat levels exceeding 600°C. 【Features】 ■ Insulation ■ Special heat circulation structure ■ Far infrared ■ Special grill plate *For more details, please download the PDF or feel free to contact us.

  • Cooking equipment
  • Other heating equipment
  • Commercial kitchen equipment
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mantle heater

Mantle heater

Easily removable without using tools, and maintenance is simple! A heater with good heating and insulation properties.

The "Mantle Heater (Jacket Heater)" is a heater that has a heating element and insulation material integrated, making it extremely effective for heating and maintaining temperature. It can be removed without the use of tools, and maintenance of the equipment can be easily performed. Since it is made to order, we can manufacture single units to fit various tanks, containers, piping, and special devices. Additionally, we also produce custom items for clean rooms and high-temperature applications, so please feel free to consult us regarding any heating or insulation needs. 【Features】 ■ Usable for heating and insulation up to 400°C in standard specifications ■ High-temperature specifications up to 600°C and low-dust clean room compatible products can also be manufactured * For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof electric heater

Explosion-proof electric heater

We offer high-quality explosion-proof certified products at low prices with short delivery times! We also design and manufacture according to your specifications.

CHEMIARX offers "Explosion-Proof Electric Heaters." We provide various models, including the "DWBDR I Series," which can be integrated into containers to heat liquids, the "DWBDR F Series," which efficiently heats liquids, and the "DWBDR A Series," which heats gases. We offer high-quality explosion-proof certified products at short delivery times and low prices. 【Product Lineup】 ■ Flanged Explosion-Proof Sheath Heater DWBDR I Series ■ Shell and Tube Type Explosion-Proof Sheath Heater DWBDR F Series ■ Box Type Gas Heating Explosion-Proof Electric Heater DWBDR A Series *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • Heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Heater

IPROS Services
COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.