Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1861～1890 item / All 2569 items
The lamented part uses stainless steel. It employs a HIGH QUALITY INSULATOR.
The heater element uses stainless steel. It has a finished diameter of 12mm, achieving instant heating. This is a long-lasting heater that uses a high-quality insulator.
Long-lasting products using HIGH QUALITY insulators.
The heater element uses stainless steel. It has a finished diameter of 12 mm, achieving instant heating. It is a long-lasting heater that uses a high-quality insulator.
The fin (AERO FIN) also uses stainless steel, just like the element.
The fins (AERO FIN) also use stainless steel, just like the heater element. By attaching fins with an outer diameter of 24.5 mm to a heater with a finished diameter of 12 mm, excellent thermal efficiency is achieved.
I have achieved the best temperature distribution from low temperature to high temperature.
The element is made of stainless steel for long-lasting durability. The heater lead wires, which were previously problematic, now use heat-resistant lead wires. This has achieved the best temperature distribution from low to high temperatures.
It consists of two thin sheets with silicone rubber pressed between two upper and lower glass cloths.
It has excellent flexibility, so it can be used for various shapes of heated objects.
The heating element positioned in the center of the pipe demonstrates excellent performance even at high temperatures.
A sheath heater refers to an electric heater in which a spiral heating element is filled with a highly insulating powder with good thermal conductivity in the center of a metal pipe.
Our company handles completely domestically manufactured stainless steel heating elements. By using stainless steel, there is no deviation in resistance values due to aging, and maintenance is not required.
Our company offers controllers that can be controlled with an infrared remote. By setting up HUB equipment, you can also make your floor heating a part of your smart home! You can turn it ON/OFF before and after returning home, allowing for a more comfortable experience! Additionally, our heaters have responded to many customer requests without being confined to the concept of floor heating. For example... ● I want to install a heater on the wall! ● I want to create a rock bath! ● I want to introduce it to a unit bath! ● I want to implement it in a camper van! ● I want to put it in a trailer house! We have tackled many projects that are difficult under the concept of floor heating, with all employees working together to discuss safety and ensure customer satisfaction. If you’ve been turned down by other manufacturers... If you think it’s impossible under normal circumstances... We will do our best to meet your wishes, so please feel free to contact us first. A manufacturer that goes beyond the concept of floor heating Things that can be done because of S-Cut There’s still more! For inquiries, please contact Watanabe at 080-3358-9728 watanabe@s-cut.com
Limited quantity value pack with construction costs included, available in 3 preset sizes.
The completely domestically manufactured custom-made stainless steel heater manufacturer SCUT SYSTEM is now offering a limited-time package that includes installation costs for three preset sizes. ● The preset sizes are: For 4.5 tatami mats (regular price 314,188 yen, now available for 80,000 yen including installation costs) For 6 tatami mats (regular price 386,339 yen, now available for 96,000 yen including installation costs) For 8 tatami mats (regular price 472,163 yen, now available for 120,000 yen including installation costs) *The prices listed are excluding tax. To make it more accessible for you, we have prepared a limited-time package. Don't miss this opportunity! *Each size is available in limited quantities. Sales will end once the set number is reached, so please understand. This includes floor heating installation costs. Please inquire about the installation categories. The prices listed are wholesale prices for construction companies and renovation firms. If you wish to deal directly, please contact us. Heater comes with a 10-year warranty and the controller has a 3-year warranty. The prices listed are excluding tax.
Detects minute liquid leaks! The sensor itself generates power, so no external power supply is needed.
Power-free liquid detection! Revolutionary Mg-air battery method "Liquid Detection Sensor" The Liquid Detection Sensor is based on Mg-air battery technology and generates power when it comes into contact with water or other liquids. It operates without any external power supply for the sensor part, and notably, it can reliably generate power and detect not only water but also urine and blood. ■ Battery-less Eliminating the need for power supply, which was essential for conventional liquid sensors, enables operation without restrictions on installation locations. ■ High sensitivity detection capability Achieving a high-sensitivity design that can reliably detect even a few drops of liquid. It can detect minor liquid leaks and condensation without missing them. ■ Compact and flexible installation With a slim and small design, it can be easily installed in narrow spaces and gaps in equipment where conventional sensors would be difficult to place. It can be utilized in various locations such as around piping, under floors, and in ceilings. ■ Notification system The detected information is implemented to be notified via email to smartphones or computers. Even in sites requiring constant monitoring, remote situation checks are possible, enabling prompt responses. *For more details, please refer to the PDF document or feel free to contact us.
Heat exchanger for water and CIP solution
The Tetra Spiraflow CIP & Water Heater is a tubular heat exchanger designed to directly heat CIP solutions and process water in-line using steam. It features a hygienic design and is intended for use in food manufacturing. This heater is equipped with a floating tube that absorbs thermal expansion caused by the temperature difference between the CIP solution and steam at the beginning of each stage of the cleaning cycle. The Tetra Spiraflow CIP heater is a single-pass heat exchanger, where the CIP solution flows through a parallel group of tubes. The heat transfer medium flows in the spaces around those tubes. The tubes for the CIP solution consist of several tubes of the same diameter. These tubes are of the corrugated type, which promotes turbulence in the liquid and enhances heat conduction. For more details, please contact us or refer to the catalog.
Self-regulating heater cable capable of maintaining a process temperature of up to 110°C! It can also be used for freeze prevention, which has significant heat loss.
It is the first type approval system in the country, compliant with JIS testing (JIS C 3651)! The heat resistance temperature for the QTVR series heating cables is 110°C for both continuous and intermittent operation. It can be used as an electric heating system in hazardous locations of Type 1 and Type 2 in Japan, not only in general areas exposed to acids, alkalis, and organic substances but also in specific QTVR products and system configurations of auxiliary components. The auto-trace heater (self-regulating heater) is a self-regulating parallel circuit heater developed by Raikem. It does not overheat or burn out even without a thermostat. It provides reliable and safe electric heating and insulation. Additionally, due to its continuous parallel circuit structure, it can be cut to the required length on-site. This self-regulating heater has been adopted by various power companies as part of their energy-saving proposals. *For more details, please contact us or download the catalog.
![Self-regulating heater [for snow melting, freezing prevention, snow shedding prevention, etc.]](https://image.mono.ipros.com/public/product/image/2c5/2000208530/IPROS48389595562810980176.png?w=280&h=280)
Control heat generation according to temperature changes! For snow melting, freezing prevention, and snow slide prevention! Technical materials available.
The Reikem "Auto Trace Heater" is a self-regulating heater that automatically controls the amount of heat generated according to changes in ambient temperature. Essentially, it does not require temperature adjustments using thermostats or similar devices, and there is no concern about overheating or burnout. Due to its parallel circuit structure, it can be cut to any desired length on-site, and it also allows for straight and T-type connections. Installation is easy, and since it is maintenance-free, maintenance costs can be reduced. In addition to melting snow on roofs and preventing pipe freezing, it is effective for preventing snow slides, icicle formation, and road heating. Furthermore, it is widely used in industrial applications for temperature maintenance of pipes and tanks, among other uses. ★ Free samples and technical materials for the "Auto Trace Heater" are currently available! ★ * Technical materials can be viewed immediately by downloading the PDF. Please apply for samples through the "Contact Us" section. (Limited to 20 companies) (Please include your intended use in your inquiry.)
With this passion, we support businesses! We handle all processes from design to construction quickly and carefully.
Techno Kashiwa Co., Ltd. is a thermal engineering company specializing in electric heaters. Since 1986, we have been providing heat trace systems for a long time. Based on our extensive experience and high level of expertise, we have gained the support of many customers. Our company mainly handles Raychem brand "self-regulating heaters." These heaters have obtained explosion-proof certification, ensuring high safety and excellent workability, while also being energy-efficient and easy to maintain. 【Business Activities】 ■ Design, construction, and sales of self-regulating heating systems ■ Design, construction, and sales of high-output heating systems, including MI heaters ■ Design, construction, and sales of leak detection systems ■ Insulation work and electrical wiring related to the above ■ Design and manufacturing of control panels ■ Sales of anti-corrosion sheets for piping *For more details, please refer to the PDF materials or feel free to contact us.
![[Case Study on Introduction of Electric Energy] Sanyurek Co., Ltd.](https://image.mono.ipros.com/public/product/image/636/2000790776/IPROS31107432793332247692.png?w=280&h=280)
Introducing self-regulating heaters as a heat source for insulating resin tanks! Achieving low maintenance and quality preservation.
At Sanyurek Co., Ltd., we have expanded our production capacity by installing above-ground tanks for resin storage and additional piping to transfer resin from these tanks to the production process. Due to quality requirements, the resin needs to be maintained at a temperature of 50°C to 60°C, and we have adopted self-regulating heaters as the heat source. These heaters, which have high safety features and are explosion-proof, require almost no maintenance, thereby reducing the burden on equipment personnel. Additionally, their excellent temperature control allows for the maintenance of high product quality. 【Key Factors for Introduction】 - No risks associated with hot water tracing, while providing excellent temperature control - Achieves temperature uniformity comparable to hot water tracing - Ensures stable product supply even in the event of heater failure *For more details, please refer to the PDF document or feel free to contact us.
From steam to self-regulating heater, preventing recrystallization.
At the Mitsui Sugar Co., Ltd. Kobe Factory in Kobe City, Hyogo Prefecture, self-regulating heaters were installed to prevent the re-crystallization of liquid sugar. Previously, warm air was directly blown into the liquid sugar tank, causing the liquid sugar to re-crystallize, which clogged the strainer (a mesh device used to remove solid components from liquids), resulting in longer shipping times and becoming a challenge. A self-regulating heater was proposed for heating the liquid sugar, which is prone to quality changes, and it was wrapped around the lower part of the liquid sugar tank to provide external heating. After installation, the introduction of the self-regulating heater reduced primary energy consumption by 56% due to the elimination of the need for heating and the resolution of heat loss. The prevention of re-crystallization shortened shipping times by 30 minutes annually, and the need for strainer cleaning was eliminated, achieving reduced maintenance. Furthermore, temperature uniformity improved quality and reduced the risk of microbial growth.
Introducing Japanese-made quality and safety: parasol heaters, parasol mist coolers, and commercial bonfires.
"Parasol Heater" comfortably warms various gathering places such as outdoor restaurants and terraces, hotels, and event venues during winter. The parasol heater transforms cold outdoor spaces into warm environments where people can gather. It is available in city gas, LP gas cylinder, and electric types, allowing you to choose based on your installation environment. It can be utilized in various locations such as theme parks, hotels, cafes, and restaurant terraces. "Parasol Mist Cooler" can be easily attached to the parasol heater, turning it into a mist cooler for summer. With 360-degree mist spraying, it is expected to lower the temperature around the device by 2 to 3 degrees Celsius. It creates a pleasant atmosphere in outdoor summer spaces such as theme parks, hotels, and outdoor event venues. "Commercial Bonfire" has played an important role throughout history in healing people, fostering friendliness, and promoting communication through "flames." The bonfire series designs attractive spaces where people can "gather" and "interact." It can also be used as a decorative flame object for store decorations and entrances. For more details, please download the catalog or contact us.
![Japan Sees Line Comprehensive Catalog [Heater]](https://image.mono.ipros.com/public/product/image/3b6/2000115208/IPROS4381906450314988951.png?w=280&h=280)
You can view the complete catalog of the heater manufacturer Nippon Seisen by downloading it from Ipros. It includes 58 products such as heating devices, heaters, and humidifiers.
-
Since the heat transfer surface per unit length is large, it is a compact and lightweight pin tube type heat exchanger.
The Kajiwara heater was developed by Sanrod International in Sweden, and initially, it was imported and sold in the Japanese market by Gaderius Trading Company. Compared to conventional shell-and-tube heat exchangers, it boasts extremely high efficiency and can be made compact and lightweight, attracting significant attention. Since 1964, Kajiwara Iron Works has started domestic production, manufacturing and delivering approximately 50,000 units by the end of 2003, and it has been widely favored in the industrial sector. In January 2004, Kajiwara Iron Works acquired the sales rights from Orborg Industries and transferred engineers from that company, starting as a manufacturer with a consistent approach to design, production, and sales. The Kajiwara heater is categorized into "pinch tube type" and "coil tube type" based on the shape of the heat transfer surface. For more details, please contact us or refer to the catalog.
[Parts Repair/Repair/Reimplementation] Good workability! Thin spot preheater compatible with lead-free solder.
The "PH-400" features a maximum 360W infrared heater that allows for quick preheating from the back side. It is optimally designed for soldering small circuit boards, enabling quick soldering and removal of devices. It is effective for underfill removal (when used with a soldering iron). With a slim design of 38mm in height, it offers excellent workability. It strongly supports soldering tasks that have become difficult due to the use of lead-free solder. 【Features】 ○ Enables quick soldering and removal of devices ○ Uses positioning magnets for accurate and efficient work For more details, please contact us or download the catalog.
A high-performance low-temperature freezer floor heater that achieves safety and functionality.
It prevents the freezing around the door, which hinders the opening and closing of the thermal door and can cause malfunctions. It also prevents the freezing of the floor surface, thereby preventing slips and falls for workers and forklifts or transport equipment. In commercial low-temperature freezers, environments of -30°C and -40°C are not uncommon, but even in such harsh low-temperature conditions, safety and functionality are maintained and realized. A long history of numerous delivery records is a testament to our reliability. For more details, please contact us or refer to the catalog.
We offer the ideal equipment with a diverse product lineup.
In various electronics products, technologies for heating objects and measuring their temperature are essential. At our Art Engineering Thermal Equipment Division, we develop and manufacture micro sheath heaters with excellent durability and thermal efficiency, as well as temperature sensors capable of high-precision measurements up to high temperature ranges, based on the technical know-how we have cultivated over many years. We supply products across a wide range of fields, from cutting-edge areas such as semiconductors and liquid crystals to home appliances. For more details, please contact us or refer to our catalog.
A lineup of products tailored to needs, including reverse combustion ultra-compact hot water boilers!
At Yuzutec Co., Ltd., we handle various models of the hot water boiler "MS Series." Starting with the "MS-808-A2 type," which features a large-capacity storage tank to enhance operational efficiency, we also offer the "MS-200-8 type" and "MS-500/600 type," which utilize a forced circulation recirculation method. We provide products that meet your applications, purposes, and installation conditions. 【Product Lineup】 ■ MS-808-A2 type ■ MS-808-B2 type ■ MS-200-8 type ■ MS-500 type ■ MS-600 type *For more details, please refer to the PDF materials or feel free to contact us.
The collected NMP solution can be concentrated up to about 80%! This helps prevent pollution and conserve the global environment.
This product is an NMP recovery scrubber device that can achieve high-efficiency and high-quality solvent recovery. NMP-containing exhaust gas is absorbed by a special scrubber, and the recovered NMP solution can be further refined and reused, achieving a quality comparable to that of new NMP solvent. Additionally, under normal operating conditions, auxiliary cooling equipment is not required, allowing for a more compact setup and reduced running costs. 【Features】 ■ The recovered NMP solution can be concentrated up to about 80%. ■ It can be refined and reused after recovery. ■ High-efficiency and high-quality solvent recovery is possible. ■ A purification device for the recovered solvent (post-processing) can also be proposed. ■ Closed processing can be performed with minimal secondary wastewater generation during normal operation. *For more details, please refer to the PDF materials or feel free to contact us.
The heater surface is large, and angle adjustment is possible! An infrared medium-wave heater with excellent heat efficiency.
"Pronowave" is a super-fast drying infrared medium wave heater that efficiently and rapidly dries the entire coating film. It demonstrates excellent heat absorption from two-component urethane paints to thermosetting paints, powder coatings, and water-based paints. Additionally, the lifespan of the emitting body is long, and due to its good thermal efficiency, power consumption is significantly reduced compared to shortwave heaters. 【Features】 ■ Excellent thermal efficiency ■ Easy operation ■ High work efficiency ■ Superior safety and economy *For more details, please refer to the PDF document or feel free to contact us.
![[Customization Example] Heater with Inspection Opening](https://image.mono.ipros.com/public/product/image/711/2000262486/IPROS6545771848715367690.JPG?w=280&h=280)
A heater with an inspection opening that can be checked while the element section is connected to the duct.
[Customization] This is a heater equipped with an inspection opening that allows for checking while the element section is connected to the duct. Inoue Heater Co., Ltd. manufactures heaters and coolers that are customized to meet your specific requirements, in addition to standard products. *For more details, please download the comprehensive catalog or contact us directly.*
![[Customization Example] Heater and Cooler with Filter Box](https://image.mono.ipros.com/public/product/image/da6/2000262490/IPROS1559090048182370962.JPG?w=280&h=280)
Heater with medium performance and HEPA filter box.
[Customization] This is a heater equipped with a medium-performance HEPA filter box. Inoue Heater Co., Ltd. manufactures customized heaters and coolers tailored to your needs, in addition to standard products. *For more details, please download the comprehensive catalog or contact us directly.*
![[Customization Example] Heater with Rain Shield and Hat](https://image.mono.ipros.com/public/product/image/28f/2000262492/IPROS3202860635379004968.JPG?w=280&h=280)
A heater with a rain cover hat.
【Customization】 This is a heater equipped with a rain shield. Inoue Heater Co., Ltd. manufactures heaters and coolers that can be customized to meet your specific needs, in addition to standard products. *For more details, please download the comprehensive catalog or contact us directly.
![[Customization Example] Main Body Pull-Out Structure Heater](https://image.mono.ipros.com/public/product/image/0f3/2000262505/IPROS7258118982215099486.JPG?w=280&h=280)
Cooler with filter
[Customization] This is a heater designed with a structure that allows the element section to be pulled out from the main casing. It is designed so that the equipment can be pulled out even in a duct-connected state for heater maintenance. Inoue Heater Co., Ltd. manufactures customized heaters and coolers tailored to your requirements, in addition to standard products. *For more details, please download the comprehensive catalog or contact us directly.*
Reuse drain water! Manufacture suitable steam heaters for each site and achieve high-efficiency heat source recovery!
Our company designs and manufactures a wide range of products, including heat exchangers and hot air generators, which are actually adopted in various industries such as metals, paper, textiles, and food. Furthermore, based on the know-how and technology we have cultivated over many years, we also propose the utilization of waste heat through steam heaters. By reusing "drain water" and exchanging heat, it can be utilized as primary preheating. As a result, steam consumption can be reduced, leading to cost savings. 【Benefits of Implementation】 ■ Energy savings and cost reduction through the latent heat utilization of flash steam ■ Reusing drain water from other areas is even more effective (Our company can create and propose suitable heaters for each site!) *For more details, please refer to our catalog or feel free to contact us.
Introducing heaters used in processes such as drying, molding, hardening, thermal bonding, sintering, and sterilization!
At Taiyo Furo, we manufacture a special "far infrared heater" using our unique know-how developed over many years. Produced using our proprietary method, it has excellent far infrared emission characteristics for various materials, enabling fast and high-quality stable heat treatment. 【Features】 ■ High thermal conductivity and high efficiency ■ Quick heater temperature rise contributes to reduced working time ■ Compact design contributes to space-saving in equipment ■ Easy temperature control ■ Can be used cleanly *For more details, please refer to the PDF document or feel free to contact us.
