Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Feb 25, 2026～Mar 24, 2026
This ranking is based on the number of page views on our site.
2101～2130 item / All 2604 items
Touch-safe heater
Touch-safe heaters protect electrical and mechanical equipment from low temperatures, condensation, and corrosion. They also utilize natural convection to maintain a stable enclosure temperature, allowing warm air to circulate.
Electric heater
Fan-driven heaters with thermostat control protect machinery, electrical, and electronic equipment from low temperatures, condensation, and corrosion. This maintains a stable enclosure temperature. The fan draws in cold air from the bottom of the enclosure and passes it through the thermostat and heating element before releasing it inside the enclosure. The heated air is then expelled through the top of the heater unit.
Heater for explosion-proof areas, ATEXA
It is designed for use in hazardous locations where electrical components require protection from condensation, corrosion, rapid temperature drops, and low temperatures.
Easily set the temperature according to your needs! A heating device that can also dry raw materials, carbonize, and recover oil.
The "Electric Heater Continuous Heating Device" is a system capable of drying food, removing low moisture, carbonizing, and recovering oil from high-calorie waste such as waste plastics and waste tires. Since it uses electric heating, temperature settings can be easily adjusted according to the application, and there is no unnecessary heat, which is expected to reduce running costs. By carbonizing raw materials that contain precious metals and rare metals, such as those found in mobile phones, the concentration of these metals can be increased. Additionally, since the amount of fuel and the combustion of pyrolysis gas are minimal, exhaust emissions can be significantly reduced. 【Features】 ■ Low cost and high quality ■ Capable of drying and carbonizing raw materials ■ Possible to recover oil from high-calorie waste ■ Resource recovery is possible ■ Oil recovery is also possible *For more details, please download the PDF or feel free to contact us.
Compact installation space! It can heat bar materials in a wide range of sizes from φ30 to φ80.
The "Pre-Heating Heater for Shear" is an induction heating device installed between the bar rack and the shear to preheat the bar material before it is sheared. It produces clean cutting surfaces and is particularly effective in preventing cutting cracks in billets during winter. Since it can be installed between the bar rack and the shear, there is no need to allocate extra installation space. 【Features】 ■ Compact installation space ■ Can be installed between the bar rack and the shear ■ Effective in preventing cutting cracks ■ Capable of heating a wide range of sizes ■ Produces clean cutting surfaces and is particularly effective in preventing cutting cracks in billets during winter *For more details, please refer to the PDF document or feel free to contact us.
A detection system that easily detects unauthorized intrusions and locates them! For customers who want to implement a security system but keep costs low!
The "RFID Starter Kit" is designed to meet the needs of customers who want to implement a security system at a low cost, start with a trial level, and gradually expand. ◎ Standalone Type This type can be used without a computer. When a person without a tag approaches the entrance, it recognizes this as unauthorized entry and alerts the surroundings with a patrol light. ◎ Simplified Software Type This type works in conjunction with a computer. When the mini tag's ID signal is received by the AP antenna, it unlocks the electric lock (sold separately) and allows for the search of entry/exit status and entry/exit history in the database. 【Features】 ■ Easily detect unauthorized entry and locate positions ■ Can be implemented at a low price ■ Supports tag expansion after installation *For more details, please request documentation or view the PDF data available for download.
The lifespan is approximately 10,000 hours! Introducing methods to reduce heater power consumption and pipe corrosion.
A sheath heater is a heating element that surrounds a heating wire with an insulating material for electrical insulation, and further protects it with a metal tube on the outside. The lifespan is fundamentally a function of the wire diameter and temperature of the heating wire, but corrosion of the heater pipe can also limit its lifespan. Metals ultimately oxidize or chlorinate, leading to corrosion and forming metal oxides or metal chlorides. To minimize this change, methods such as "selecting a steel type suitable for the environment" and "applying surface treatments like pickling and electro-polishing" can be employed. **Main Factors Determining Heater Power Consumption** - Type of substance being heated - Mass of the substance being heated - Flow rate of the substance being heated - Pre-heating temperature (°C) and required post-heating temperature (°C) *For more details, please refer to the PDF document or feel free to contact us.*
In cold and low-temperature winter environments, batteries can experience significant capacity degradation and phenomena such as reduced charging efficiency or inability to charge while parked or charging.
We would like to introduce the "Battery Heating Heater" offered by Churitsu Electric Co., Ltd. In cold regions and low-temperature environments during winter, batteries experience a significant decrease in performance, and during parking or charging, there can be a decline in charging efficiency or even a phenomenon where charging is not possible. This product is a heater that warms the battery to an appropriate temperature without compromising its inherent capabilities, even in low-temperature environments. 【Features】 ■ Effect: Prevention of charging capacity reduction ■ Components: Battery *For more details, please refer to the PDF document or feel free to contact us.
It is possible to manufacture in free shapes by forming circuits through screen printing!
We would like to introduce the "Thick Film Printed Heater" offered by Churitsu Denka Co., Ltd. Due to the screen printing process used to create the circuit, it can be manufactured in various shapes. Please use it at temperatures below 300°C. Feel free to contact us when you need assistance. 【Examples of Product Applications】 ■ Electric kettle ■ Coffee maker ■ Iron *For more details, please refer to the PDF document or feel free to contact us.
Remove factors that hinder external information such as snow melting, ice melting, and anti-fogging, tailored to various shapes! Maintain high transmittance and enable heating over a surface area.
We would like to introduce the "Transparent Film Heater" offered by Churitsu Denratsu Co., Ltd. Various devices are installed in automobiles to ensure greater safety. In particular, cameras and various sensors can be hindered by snow, freezing, and fog in cold regions, which may prevent safety devices from functioning properly. Our product is a heater in film form that maintains high transparency and can heat surfaces, effectively removing factors that obstruct external information such as snow melting, ice melting, and anti-fogging. [Installed Parts] ■ Exterior Camera ■ Headlamp ■ Door Mirror *For more details, please refer to the PDF document or feel free to contact us.
It is a surface heater with a metal resistance element sandwiched between silicone rubber sheets!
We would like to introduce the "Silicone Rubber Heater" offered by Churitsu Electric Co., Ltd. This product is a surface heater that sandwiches a metal resistor between silicone rubber sheets. Please use it at a temperature of 150°C or lower. Since it is not waterproof, please ensure that liquids do not come into contact with it. 【Examples of Product Applications】 ■ Heat retention ■ Dehumidification ■ Preheating ■ Frost removal *For more details, please refer to the PDF materials or feel free to contact us.
It can be used for warm water washing toilets, heating, defrosting, and frost removal!
We would like to introduce the "Aluminum Foil Heater" offered by Churitsu Electric Co., Ltd. Examples of product applications include warm water washing toilets, insulation, defrosting, and frost removal. Please use at temperatures below 150°C. If you have any inquiries, please feel free to contact us. 【Product Application Examples】 ■ Warm Water Washing Toilet ■ Insulation ■ Defrosting ■ Frost Removal *For more details, please refer to the PDF document or feel free to contact us.
It is a flat heater with nichrome wire sandwiched between mica!
We would like to introduce the "Mica Heater" offered by Churitsu Electric Co., Ltd. This product is a flat heater with nichrome wire sandwiched between mica. Please use it at temperatures below 400°C. Feel free to contact us if you have any inquiries. 【Examples of Product Applications】 ■ Heating ■ Toaster ■ Drying equipment ■ Beauty and medical equipment *For more details, please refer to the PDF materials or feel free to contact us.
Self-temperature control type PTC air heater with high safety and excellent energy efficiency.
PTC air heaters (positive temperature coefficient heaters) are heaters that use ceramic elements with PTC (Positive Temperature Coefficient) characteristics. They are self-temperature-controlled, highly safe, and energy-efficient air heaters. PTC air heaters are high-efficiency heating devices installed in electric vehicles, providing a comfortable cabin temperature. Heaters utilizing PTC materials feature rapid heating, energy savings, and long lifespan, demonstrating stable heating performance even in winter or extreme weather conditions. Additionally, their compact integrated design makes installation easy, offering excellent space efficiency. Furthermore, they are versatile, suitable not only for vehicle heating but also for household heaters. PTC air heaters represent cutting-edge technology that contributes to environmental protection, comfort, and safety, making them an essential component supporting the spread of electric vehicles.
The panel is made of highly durable striped steel plate! It has a non-slip surface treatment!
"Hot Ban" is a snow melting panel heater suitable for preventing snow accumulation and freezing in inspection passages and entrances. Since no paving work is required, it allows for cost reduction and a shorter construction period. The panels are made of highly durable checkered steel plates and have a slip-resistant surface treatment. 【Features】 ■ No paving work required ■ Suitable for small areas such as stairs ■ Cost reduction and shorter construction period possible ■ Panels made of highly durable checkered steel plates ■ Slip-resistant surface treatment (Heavy objects such as vehicles are not allowed to enter) *For more details, please refer to the PDF materials or feel free to contact us.
It is also possible to connect multiple mats to a single power source for installation! Since it is an add-on, it is easy to install!
The "Soheater Onroof" is an open-type roof heater that can be directly installed on roofs and coping. It is also possible to connect multiple mats to a single power source during installation. The rubber and heating element are integrated through high-pressure molding, ensuring excellent insulation safety. Additionally, it is made of weather-resistant rubber, making it highly durable even on roofs and rooftops exposed to direct sunlight. 【Features】 ■ Weather resistance, heat resistance, and chemical resistance ■ Excellent insulation safety ■ Easy to install as it can be retrofitted ■ Highly durable even on roofs and rooftops exposed to direct sunlight ■ Multiple mats can be connected to a single power source during installation *For more details, please refer to the PDF document or feel free to contact us.
It is flexible and easy to adhere to the heated object, and can also fit into small spaces. It can be used with vacuum plate heaters as well.
**Features of the Micro Heater** - The thin wire diameter makes installation and wrapping easy. - Depending on the specifications, there are few issues when used in a vacuum. - The micro heater offers a wide range of resistance values. - Variations can also be increased. - We can accommodate requests for special resistance values. - It can fit into spaces where conventional heaters could not. The "Micro Heater with Non-Heating Section" is a product made using Sanko's unique method. Its outer diameter is very thin, making installation and wrapping easy, and if it has a non-heating section, there are few issues when used in a vacuum. (The non-heating section is between 100 mm and 1000 mm.) It can be used with heating plates for vacuum applications.
We manufacture cartridge heaters in Sakai City, Osaka Prefecture. If you are experiencing issues with heater disconnection or heater lifespan, please contact us.
■What is a Cartridge Heater? A cartridge heater is a pipe-type heater widely used in molds, packaging machines, molding machines, and other applications. It primarily consists of a nichrome wire (heating element) wound around a molded magnesium oxide material called a bobbin, which is then placed inside a metal pipe such as stainless steel. After filling with magnesium oxide powder, a squeezing process is performed to increase the filling density of the magnesium oxide, allowing the heater to release more heat to the outside of the pipe. This makes it an excellent heater. The principle of the cartridge heater is based on resistance heating, as it uses nichrome wire as the heating element. ■Benefits of Using SUS Flexible Cartridge Heaters One of the characteristics is that they are protected from scratches due to being shielded from the outside by lead wires. Regarding the internal wiring, it can be selected based on factors such as ambient temperature.
Enhance thermal conductivity and heat the object uniformly! It has a long lifespan and excellent maintainability.
The "cast-in heater" is a device where a sheath heater is cast into materials such as aluminum, brass, and iron, allowing it to be closely attached to the object being heated for uniform heating across the surface. The gap between the casting and the heater is processed at a micro level. There is no air layer, eliminating concerns about heater breakage. Additionally, maintenance can be significantly improved. 【Features】 ■ The cast shape can accommodate simple to complex designs. ■ High heating efficiency, achieving uniform and stable heating. ■ Special specifications such as protective covers and explosion-proof types can also be manufactured. ■ The use of cartridge-type heaters can enhance maintainability. *For more details, please refer to the PDF document or feel free to contact us.
A standard product for industrial heaters! Thoroughly pursuing high performance, durability, and safety!
The "Sheath Heater" is an industrial heater that can be freely bent in addition to being straight. The basic materials used include steel, various types of SUS, Incoloy, and Inconel, and it can be utilized as a heat source for various heating devices such as cast-in heaters and fin heaters. It can be used as a standalone unit or in combination, and it is widely used not only as an industrial heater but also as a household electric heating appliance. 【Features】 - Available in straight and U-shaped standalone types, which can be combined as a composite unit. - High-purity magnesium oxide (magnesia/MgO) is filled inside the metal sheath, achieving high thermal efficiency and high insulation. - The heating element itself is not exposed to the atmosphere, minimizing degradation due to oxidation. - High strength and robustness protect against disconnection, eccentricity, and breakage caused by impact and vibration. - The metal sheath and heating element are completely insulated, eliminating concerns about electric leakage and electric shock. *For more details, please refer to the PDF document or feel free to contact us.
Ideal for heating in narrow spaces and complex shapes! Excellent environmental resistance, with waterproof types available!
The "cartridge heater" is an industrial heater that can be used by inserting it into a hole, thanks to its unique heating wire configuration that consolidates the terminals on one side. As an insert-type heater, it can provide heating in narrow spaces where external heating is difficult and on complex-shaped objects to be heated. The terminal section is available in general heating type and waterproof type, allowing for customization based on usage conditions and environments. 【Features】 ■ Available in standard, waterproof, flange, waterproof/flange, plug, and waterproof/plug types ■ Available for single-phase and three-phase applications ■ Adopts a special internal structure that excels in vibration and shock resistance ■ Reduces the number of units used due to a special manufacturing method ■ Contributes to cost reduction *For more details, please refer to the PDF materials or feel free to contact us.
The uniquely designed seed heater is arranged in a special way, ensuring that the surface temperature always maintains uniform heat!
The "Circulation Heater" is an industrial/industrial heater that arranges uniquely designed seed heaters in a special configuration, maintaining a uniform surface temperature at all times. By heating gases or liquids with our self-developed high-efficiency heater, it efficiently and stably heats the heating medium to the specified temperature. Since temperature adjustment is possible, it can be easily integrated into inline piping and other systems. In addition, we also offer "Duct Heaters" that can evenly and efficiently heat various gases passing through ducts. 【Circulation Heater Features】 ■ Uniquely designed seed heater ■ Surface temperature always maintains uniform heat ■ Efficient and stable heating of the heating medium ■ Temperature adjustment is possible ■ Insulator: Magnesia *For more details, please refer to the PDF materials or feel free to contact us.
We can manufacture in the desired shape! Efficiently heats the object being heated using radiant heat!
The "panel heater" is an industrial heater that efficiently heats objects using radiant heat. We can manufacture panel heaters in any desired shape. Taking into account the usage conditions, we apply a special far-infrared processing to the panel heater, allowing the radiant heat combined with the far-infrared effect to penetrate the heated object evenly from the inside. 【Features】 ■ Manufactured in the specified shape ■ Special far-infrared treatment on the heating surface maximizes the extraction of medium wavelengths ■ Mounting parts can also be made in any desired shape *For more details, please refer to the PDF materials or feel free to contact us.
80% of dressing room and bathroom accidents occur in winter! Please be cautious of heat shock!
It is said that approximately 19,000 accidents occur during bathing each year. Heat shock occurs due to the temperature difference between the indoor area and the changing room/bathroom, which causes blood pressure to rise and then drop suddenly. We recommend using our "Graphite Heater" to warm up changing rooms and bathrooms for health management, promoting a barrier-free temperature environment. [Graphite Heater Features] - Excellent heat retention even after heating operation stops, making it hard to cool down - Safe even when wet - The remote control floats even if dropped in water *For more details, please refer to the PDF materials or feel free to contact us.
Standard equipped with temperature sensor management function + equipped with laser pointer!
The "KRX1200R-3B6H-S" is a heater (dryer) equipped with laser pointers on both sides of the sensor, allowing for measurements with greater precision than ever before. It employs a heater that generates high output across three wavelength ranges: far infrared, near infrared, and medium wave. Additionally, the heater bulb has a long lifespan and reaches its maximum temperature in about 3 seconds after being turned on, making it economical as well. 【Features】 ■ Reduced drying time ■ Compatible with all types of paint ■ Long lifespan and economical *For more details, please download the PDF or feel free to contact us.
From the step to the roof of a one-box, all possible with this one unit! A heater with excellent functionality.
The "KRB1200-3B6H-Hi" is a heater that is easy to operate and highly functional. It features an easy-to-use digital timer. The back of the bank is equipped with ON/OFF switches for all six lights. In addition, we also offer the high-altitude carbon heater "KRX800-3B3H-Hi," which can accommodate a maximum ground height of 2,600mm. 【Features】 ■ Capable of installation from high places to foot level ■ Can perform drying work from the ceiling to the step with this one unit ■ Each heater bulb is equipped with an independent switch ■ Raising and lowering the bank can be done with just one lever *For more details, please refer to the PDF document or feel free to contact us.
Highly effective for water-based paints and ultra-high-strength steel plates! Equipped with an electric fan unit to improve drying efficiency.
The "KRX800R-3B3H-2A" is an air carbon heater equipped with two fan units. The bank descends to the floor level, ensuring thorough drying up to the step. In addition, we also offer the air carbon heater with one fine unit, "KRX800R-2B2H-1A," and the ultra-wide carbon heater with a bank width of 1200mm, "KRX1200R-3B6H-2A." 【Features】 ■ Equipped with two fan units ■ Highly effective for water-based paints and ultra-high-strength steel plates ■ Thorough drying up to the step ■ Fan units allow for airflow adjustment *For more details, please refer to the PDF document or feel free to contact us.
![[Case Study of Parasol Heater] Aniversaire Cafe](https://image.mono.ipros.com/public/product/image/710/2000877039/IPROS22252965410412545347.jpeg?w=280&h=280)
A sleek stainless steel appearance! An example of being able to use it without compromising a stylish atmosphere.
We would like to introduce a case study of our "Parasol Heater" implemented at Aniversaire Cafe Minatomirai Yokohama. The establishment has introduced 10 units for the open terrace, which has improved the usage rate by allowing customers to use the terrace seats even on cold days. From November to April, the terrace seats can now be opened regardless of the time of day. We have received feedback saying, "Even on cold days, everyone can enjoy the warmth on the terrace." 【Case Overview】 ■ Number of units installed: 10 ■ Installation period: From February 2014 ■ Installation location: Cafe terrace ■ Provision method: Rental *For more details, please refer to the PDF document or feel free to contact us.
We also manufacture products according to your specified specifications! Introducing cartridge heaters suitable for a wide variety of applications!
We would like to introduce our "Cartridge Heater." The surface of the heater is finished with high precision and smoothness, so if the gap between the heated object and the heater is minimal, the thermal conductivity will be high and efficient. The knurled type and single flange spring type heaters are designed with a robust structure for the strength of the lead outlet and the fixation of the heater. We have various models in stock at all times. We can also manufacture products according to your specified requirements, so please feel free to contact us when needed. 【Features】 ■ High thermal efficiency ■ Robust structure that withstands impact ■ Long lifespan ■ Stable insulation performance *For more details, please refer to the PDF document or feel free to contact us.
Introducing high-temperature cartridge heaters with excellent insulation, available for immediate delivery with a rich inventory!
"RAMAROD" is a high-watt density (W/cm²) cartridge heater that enables long life even at high temperatures. It uses Incoloy material for the sheath and has Incoloy end discs welded at the cartridge heater terminals, with a LavaSeal applied at the mouth. It allows for uniform and precise heating at medium to low temperatures, as well as maintaining a continuous sheath surface temperature of up to 871°C. [Features] ■ Designed for a maximum of 871°C with a lifespan of over one year ■ Connection method (U.S. PATENT No. 3307.135) ■ Ample stock available for immediate delivery ■ Always in stock *For more details, please refer to the PDF document or feel free to contact us.
