Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
1231～1245 item / All 2533 items
Electric resistance heating material Kantal Super 1900 (Kantal wire)
Two-phase molybdenum heater Cantal Super 1900 It is a ceramic heater capable of forming a stable and strong coating even at high temperatures. The maximum operating temperature of the heating element is 1850°C.
A new heating element with outstanding characteristics for cyclic use in oxygen.
The lineup of Cantal Super features a new heating element with outstanding characteristics for cyclic use in high-temperature atmospheres.
High-temperature heating element for protective atmosphere and reactive gas atmosphere.
Cantal Super RA A disilicide molybdenum heater developed for use at high temperatures above 1250°C in a special atmosphere (especially a nitrogen atmosphere).
Small Module Heater Super Tal High Power Reflector
High Power Reflector A high-output type heater module that integrates a diboride molybdenum heater and fiber insulation material.
Special-shaped heater
Based on our track record, over 50% of our products are sold as customized items processed into special shapes that are not standard types. We can easily customize to your desired furnace dimensions and specifications, so please feel free to consult with us.
Module heater for CVD coating equipment
This is a module heater for CVD equipment used for coating ultra-hard chips and molds. It can be easily customized to your desired furnace dimensions and specifications, so please feel free to consult with us.
Usable at high temperatures of 1150℃! High-temperature, high-output, long-life radiant tube heater.
The "Macaron" is a transformer-less radiant tube heater that supports a small-diameter coil heater with a special structure using Cantal APM (FeCrAl). It can operate at high temperatures of up to 1150°C and is capable of high-output use. Its structure, which takes thermal expansion and permanent deformation into account, reduces the risk of electric leakage and ensures a long lifespan. It is suitable for aluminum holding furnaces and continuous/batch gas carburizing furnaces. 【Features】 ■ Usable at high temperatures (up to 1150°C) and high outputs (up to 6W/cm²) ■ Flexible installation direction (horizontal/vertical installation) ■ Structure that enhances free radiation *For more details, please download the catalog or contact us.
A cantal flow heater capable of generating hot air up to 1100℃!
The "Cantal Flow Heater 3.5KW" is a heater capable of generating hot air up to 1100°C. For the 3.5KW type, several shapes are available as standard specifications. Additionally, you can choose from accessories such as high-performance insulation covers, temperature control panels, and gas piping fittings. 【Lineup】 ■ 3.5KW Heater ■ 3.5KW Heater (with flange adapter) ■ 3.5KW Heater (with output nozzle) ■ 3.5KW Heater (with output nozzle/flange) *For more details, please refer to the catalog or feel free to contact us.
Capable of generating clean gas at 1100℃! For applications where clean gas above 900℃ was thought to be impossible!
The "Cantal Flow Heater" is a new air heater capable of generating gas at 1100°C. It uses Cantal wire, which excels in high-temperature use and material stability. It has achieved higher heat exchange efficiency. It is very compact and easy to control the temperature (no special control required). We offer four standard types, and we can also manufacture special types that cannot be accommodated by standard products. 【Features】 ■ Output 2.6-48kW ■ Maximum 90m³/h ■ Maximum achievable temperature (up to 1100°C) ■ Compatible with commercial voltages (200V, 400V) ■ Very compact ■ Easy temperature control (no special control required) ■ Compatible gases are Air, N2, O2, CO2, H2 *For more details, please refer to the PDF document or feel free to contact us.
Heat recovery type, low running cost, hot air dryer for painting.
The world's only hot air drying furnace, Drytech, is well-known in the painting industry. Its excellent finish, rapid temperature rise, good temperature distribution, and low fuel consumption make it a bestseller worldwide. Additionally, it is a dryer that pursues quality and cost-effectiveness, suitable for installation in clean rooms.
For air/inert gas!
This is a high-precision heater for generating hot air that excels in safety. 【Features】 ○ Careful attention to the composition inside the heater for an extremely long lifespan ○ Single-phase 200V specifications are available for LH-2 and LH-3 ○ 80A versions of LH-4, 5, and 6 are also available with a 50A socket specification for inlet and outlet sizes ○ Low pressure loss types for turbo fans and high-pressure blowers are also in the lineup ○ Pressure resistance: heaters capable of withstanding 1Mpa (10kg/cm²) can also be manufactured ○ Made of SUS304 material, which is resistant to rust (special orders for Inconel and titanium steel are also possible) *For more details, please contact us via catalog download or the HP link.
A compact hot air generator capable of stably emitting high temperatures from room temperature to 800°C for extended periods.
It can be installed in a position where it can directly inject into the work, minimizing heat loss from the piping. 【Features】 ○ The heating element uses a special annealed Kanthal wire, achieving long life and stable high temperatures. ○ It demonstrates great effectiveness in spot heating of inert gases such as compressed air and nitrogen gas, with the heating element protected by a quartz body, allowing for thermal air treatment while monitoring the surface color of the heating element. ○ It is equipped with a built-in CA sensor for temperature control, achieving safer and more accurate temperature control compared to conventional products. ○ The tip of the quartz tube comes standard with straight tubes, pencil tubes, and tapered injection types to suit various tasks and works. ○ In the type equipped with a stainless steel protective tube, it can be connected to small nozzles (MX series, DX series) made by Daiko Kenetsu Co., significantly improving the accuracy of hot air injection and the processing efficiency of the work. *For more details, please contact us via catalog download or the HP link.
Low price yet long lifespan
This is a multipurpose electric heater designed to achieve high heat exchange. 【Features】 ○ Continuous operation and connection are possible ○ A low watt density heating element and rectifying plate are densely arranged in a compact casing to achieve maximum heat exchange rate ○ The internal structure of the casing consists only of the heating element, resulting in lower pressure loss and a compact design compared to bare nichrome wire coil types ○ The surface of the heating element is made of titanium-added carbide-stabilized steel, enhancing durability ○ Equipped with an overheating prevention device *For other functions and details, please contact us via catalog download or the HP link.
Vertical heater that can be installed in narrow spaces.
Made entirely of SUS (main casing SUS304 and heating element surface SUS321), it is capable of supplying clean and stable hot air. 【Features】 ○ All models come with overheat protection ○ A mechanism that allows the heater to store heat with low voltage while the fan is stopped, providing hot air simultaneously with the fan operation ○ Circuit designed to operate at normal voltage during startup ○ Heater capacity: 3 to 12 kW ○ Power supply voltage: 200V three-phase ○ Maximum temperature: 280℃ *For more details, please contact us via catalog download or the HP link.
A branch heater capable of branching 2 to 3 from a single hot air generating heater.
Made entirely of SUS (main casing SUS304, heating element surface SUS321), it is capable of supplying clean and stable hot air. 【Features】 ○ Equipped with an air volume adjustment damper and overheating prevention device ○ A mechanism that allows the heating element to store heat at low voltage while the air supply is stopped, providing hot air simultaneously with the air supply ○ Circuit designed to operate at normal voltage during startup ○ Heater capacity: 3 to 6 kW ○ Power supply voltage: 200V three-phase ○ Maximum temperature: 280℃ *For more details, please contact us via catalog download or HP link.
