Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Mar 25, 2026～Apr 21, 2026
This ranking is based on the number of page views on our site.
421～450 item / All 847 items
Buffer material roll holder (under workbench storage) W1200mm / Item number M651SWRS-1200HY
Roll material stand, hanging type. It can be attached to the tabletop to smoothly cut roll materials.
Tabletop Stretch Film Manual Packaging Holder W400 (with Cutting Rail) / Item Number M3441TF-400WM
16 "24" inch stainless steel stretch film dispenser with cutter for manual pallet wrapping tools included.
Vertical paper cushioning material roll/sheet material roll dispenser holder / Item number M610VSH-260M
A space-saving holder with a simple structure that can be used anywhere and for anything.
PP band PET band stand holder (for 1000m roll) / Item number M4181BSH-1000H
Holder for PP bands For standard 1000m rolls / For standard 2500m rolls By adjusting the fastener, it is also possible to use paper core and polyester bands. With a stopper to prevent excessive pulling of the band.
Pick up magnetic materials contaminated with hazardous substances and chemicals.
■Features ● You can turn the magnet ON/OFF simply by gripping the handle with one hand. ● It can serve as a substitute for your hand to perform transportation and sorting tasks. ● There are two types available: the short type M504MP-25K, which excels in operability, and the long type M504MP-80K, which allows you to pick up workpieces from the floor without bending down. ● The heat resistance temperature is 80°C, making it effective even in material handling tasks involving non-cooled annealed magnetic materials.
Applicable for high-purity monitoring on liquid and gas transfer lines and gas sampling for environmental assessment.
The Sabirex PFA single-layer filter holder is designed to set a PTFE membrane (sold separately) inside the main body, and is used for high-purity monitoring and sampling of impurities in fluids, such as microparticles in liquid and gas transfer lines, and gas sampling for environmental assessment. There are filter holders of various sizes corresponding to four membrane diameters (25, 47, 50, and 90 mm), and all fluid contact parts are molded from PFA, except for the PTFE membrane. In addition to the single-layer type, there are also multi-layer types that can accommodate multiple membranes (only for membrane diameter 47 mm) and various components that can be used to configure a unique filter holder.
SCANDIA is a specialized manufacturer that primarily offers grinding machines, cutting machines, and various accessories focused on metal materials.
In recent years, its performance has received high acclaim not only in metallic materials but also in the fields of ceramics, semiconductors, and dental engineering.
Filter holder for use between optical fibers, suitable for incorporation into optical measurement devices.
The "INLINE-SFH" is an inline filter holder that allows for the installation of filters between two optical fibers connected to SMA connectors at both ends, saving space. It can accommodate circular filters with a diameter of 10 to 12.7 mm. It supports thicknesses up to 9 mm and can hold three filters with a thickness of 3 mm each. 【Features】 ■ Measurement types: Reflection measurement / Transmission and absorption measurement / Fluorescence measurement ■ Filters can be installed between fibers in a space-saving manner ■ Can accommodate circular filters with a diameter of 10 to 12.7 mm ■ Supports thicknesses up to 9 mm and can hold three filters with a thickness of 3 mm each *For more details, please refer to the external link page or feel free to contact us.
Intermediate fuse holder that can be installed in places with no space.
It was developed over 30 years ago ahead of other companies for car radios, but it is now widely used in home appliances such as vacuum cleaners and refrigerators.
Dedicated tool for deburring cross holes in mass-produced parts.
The Buyer High-Speed Deburring Tool (HSD) is a deburring tool for cross holes that incorporates a new principle. Even if you improve the process and shorten the machining time, have you ever experienced that deburring takes up time and manpower? There are various methods, but finding a decisive solution for deburring can be challenging. YAMADA offers specialized tools that help improve the precision and automation of deburring. If you are having trouble with deburring, please feel free to consult us.
A milling holder for composite lathes that pursues high rigidity and high precision, compatible with major domestic manufacturers such as Nakamura-Tome, DMG MORI, and Miyano.
Heimatec's wide range of products enhances customer productivity and streamlines processes, significantly contributing to the high efficiency of multi-tasking lathes. 【Features】 ■ Commitment to Bearings To achieve high rigidity and high precision machining, we have carefully considered the types and mounting positions of bearings. Our lineup includes roller taper bearings, featuring a design that allows the collet to fit snugly in the center. ■ Adoption of AX Nut Compared to conventional products, the design allows the collet to be recessed, resulting in a shorter overhang. 【Examples of Heimatec Implementation Effects】 Internal lubrication support / Increased compatible tool sizes / Increased number of mounted tools / Off-machine setup support Cycle time reduction / Improved machining accuracy and surface roughness / Extended tool life / Enhanced chip disposal performance, etc. *For more details, please contact us or download the catalog.
Cartridge-type + 2-direction internal oil supply grooving holder
MAS Corporation is a group of experts that has been involved in cutting processing in Leonberg, Germany, for over 30 years. They have analyzed and verified various challenges that arise on-site from all angles and have worked on optimizing processes. The GND insert holder is a solution developed by MAS Corporation in response to requests from users of GND inserts manufactured by Sumitomo Electric Hardmetal. It aims to simultaneously improve chip management and the cooling of cutting edges.
Extend tool life and achieve rational and efficient processing! Shorten tool change time!
The "u-tec CKB" is a CNC composite lathe connection system manufactured by Haimatec. By using this product, tools from the BIGKAISER system can be mounted on the tool holders of CNC lathes. This system further expands the world of high-precision machining on CNC composite lathes. 【Features】 ■ Compatible with various tool types and the universal collet standard ER collet (DIN6499) ■ Very short projection distance ■ Reduces tool tilt, minimizing deflection and load on cutting tools ■ Achieves extended tool life and rational, efficient machining ■ Improves machining flexibility *For more details, please refer to the PDF document or feel free to contact us.
Improve machining efficiency of CNC multi-tasking lathes with our dedicated tool holders! Introducing customer feedback and more.
This document is a catalog summarizing the main high-tech tool holders suitable for the Okuma "LB3000." High-quality and high-rigidity tool holders enhance the machining efficiency and accuracy of CNC multi-tasking lathes. It includes testimonials from customers who have adopted high-tech tool holders, as well as the lineup of tool holders for the Okuma LB3000EX. [Contents] ■ Feedback from high-tech users! ■ Features of the bearings ■ Standard holder lineup for LB3000EX (1) ■ Standard holder lineup for LB3000EX (2) ■ Standard holder lineup for LB3000EX (3) ■ Standard holder lineup for LB3000EX (4) ■ Standard holder lineup for LB3000EX (5) *For more details, please refer to the PDF document or feel free to contact us.
![[Data] Citizen Machinery BNJ42/51 Standard Touring](https://image.mono.ipros.com/public/product/image/fa0/2000445100/IPROS98003283391869026911.jpeg?w=280&h=280)
Improving processing efficiency of CNC composite lathes! Featuring customer testimonials and lineup.
This document is a catalog summarizing the main high-tech tool holders for the Citizen Machinery models "BNJ42S/SY6 and BNJ51S/SY6." High-quality and high-rigidity tool holders enhance the machining efficiency and improve the machining accuracy of CNC multi-tasking lathes. We will introduce feedback from customers who have adopted high-tech tool holders, as well as the lineup of tool holders for the Citizen Machinery BNJ42S/SY6 and BNJ51S/SY6. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of the bearings ■ BNJ42S/SY6 and BNJ51S/SY6 standard holder lineup (1) ■ BNJ42S/SY6 and BNJ51S/SY6 standard holder lineup (2) ■ BNJ42S/SY6 and BNJ51S/SY6 standard holder lineup (3), etc. *For more details, please refer to the PDF document or feel free to contact us.
![[Data] Standard tooling for Nakamura Tome WT-100](https://image.mono.ipros.com/public/product/image/b5b/2000445104/IPROS29679164434058852305.jpeg?w=280&h=280)
Improving processing efficiency of CNC composite lathes! Featuring customer testimonials and lineup.
This document is a catalog summarizing the main high-tech tool holders for the "WT-100" manufactured by Nakamura-Tome Precision Industry. High-quality and high-rigidity tool holders achieve improved machining efficiency and accuracy for CNC multi-tasking lathes. We will introduce customer feedback from those who have adopted high-tech tool holders, as well as the lineup of tool holders for the WT-100 from Nakamura-Tome Precision Industry. [Contents (excerpt)] ■ We asked high-tech users! ■ Features of the bearings ■ Standard holder lineup for WT-100 (1) ■ Standard holder lineup for WT-100 (2) ■ Standard holder lineup for WT-100 (3), etc. *For more details, please refer to the PDF document or feel free to contact us.
Milling holder and tooling for Swiss-type automatic lathes.
Highmatec, which has received high praise in the market for its turret-type multi-tasking lathes, is expanding its lineup of tool holders for Swiss-type automatic lathes. Currently, the lineup is primarily focused on the Citizen Cincom series. By leveraging advanced tool holder design know-how accumulated from multi-tasking lathes while clearly defining its target and concentrating its efforts, Highmatec maintains a reasonable price range, resulting in high praise from users in the European and American markets and significant adoption. **Benefits of Highmatec Tool Holders for Automatic Lathes** - High precision and high rigidity with Highmatec quality - Long life achieved through an advanced sealing system - A lineup of high-efficiency processing speed-up holders (maximum allowable rotation speed of 48,000 min-1) - A lineup of internal lubrication holders with a maximum pressure resistance of 14 MPa
Automatic lathe milling holders such as Cincom, Star, and TSUGAMI.
It is now an era where milling holders are selected and purchased according to the machining, just like choosing tools and equipment. In Japan, when purchasing automatic lathes, it is common to choose genuine milling holders. On the other hand, in Europe and the United States, there are many cases where non-genuine products are selected. Recently, there has been an increase in the processing of difficult-to-cut materials and compound machining. To address these, attention is also being drawn to automatic lathe milling holders. By selecting milling holders that match the machining, just like choosing equipment and cutting tools, they may become a reliable asset. High-torque holders, speed-up holders, and hob processing units that cannot be covered by genuine products cannot even be chosen if you are unaware of them. Please consider them as options when updating equipment or when you encounter difficulties in machining.
Tool for automatic lathe rear post with Y-axis adjustment function.
With Adjust - Precisely Adjusting the Tool Height Bring your work to a new level with With Adjust and enjoy flexibility. This is an innovative and patented tool holder system ideal for turning operations on sub-spindles. Height adjustments can be made quickly and easily without compromising stability. Use With Adjust to fine-tune the path to the future of back work. This is a completely new adjustable tool holder system from With Cut. It allows for rapid height adjustments without losing stability. ■ Quick With fine-tuning adjustment screws and stable clamps, you can change the center height. Simply loosen one clamp screw from the head and shank of With Adjust - adjustments can be made. It's that easy. ■ Stable The shank and adjustable head are arranged together with the serrated surface on the X-axis and adjustment screws and springs on the Y-axis. The reproducibility achieved by removing and re-tightening the tool holder is less than 0.005.
Terminal with a surface mount (SMT) structure! A compact design coin battery holder
Coin cell battery holder series available in 9 sizes, from LR44 to CR1220 to CR2477. The terminals are designed with a surface mount (SMT) structure, allowing for a compact design that saves space on the circuit board. Made from glass-filled LCP resin, it can withstand high temperatures and is compatible with lead-free solder reflow. For mass production use, the carrier taping packaging (TR type) that can be used with automatic mounting machines is convenient. SMTU1220-G, SMTU1632-G, and SMTU2032-1-G are gold-plated models. 【Features】 ○ Made from glass-filled LCP resin with high heat resistance ○ Compatible with lead-free solder reflow ○ Operating temperature range: -40℃ to 100℃ For more details, please contact us or download the catalog.
Battery holder for lithium batteries CR2 and CR123A!
The CR2 and CR123A series are battery holders for lithium batteries CR2 and CR123A. Selectable between PC type with mounting pins for the circuit board and the R type with lead wires. 【Contents】 ○ Holder material: Flame-retardant ABS (UL94V-0 main component) ○ Terminal material: Phosphor bronze ○ Terminal surface treatment: Nickel plating For more details, please contact us or download the catalog.
SN・BH・MP type battery holder with lead wires! Compatible with a wide range of 1 to 8 batteries!
Battery holder with lead wire. 23 different battery patterns are available. Bulk packages (50 or 20 pcs) are available for some models. 【Materials】 ○ Holder material: PP / PE / ABS ○ Spring / finish: iron wire / nickel-plated ○ Terminal material / treatment: brass / nickel-plated ○ Wire: AWG24 / AWG26 (UL1007) For more details, please contact us or download the catalog.
Catalog featuring various battery boxes, battery holders, coin-type lithium batteries, and tabbed button batteries.
TAKACHI has a variety of battery boxes, battery holders, battery cases, coin-type lithium batteries, tabbed coin cells, and tabbed button cells in stock at all times, available for sale from one piece. The battery specifications include a lineup of seven sizes: SR621 and LR44 button battery holders, and CR1220, CR1632, CR2032, CR2430, CR2450, and CR2477. For battery holders with PCB mounting terminal types, SMT mounting types and PCB mounting pin types are available for selection. For AA, AAA, C, D, and 9V battery holders, options include lead wire types, PCB mounting pin types, and snap terminal types. Additionally, we also sell holders for 006P (9V), CR2 and CR123A lithium battery holders, battery snaps, and battery terminals with springs.
A collet press-fit tool holder that combines high gripping power and precision!
Using a dedicated hydraulic clamping device, the collet is pressed into the holder with a maximum pressure of 9 kN. This helps improve cutting conditions, tool life, machining accuracy, and surface roughness. (Features) - Tool runout accuracy of less than 3 μm (3xD) - Repeated accuracy of tool protrusion length of less than 10 μm - Tool exchange possible in less than 10 seconds - Hygienic and skill-free, without the use of heat - Vibration suppression expected due to vibration damping effect - No decrease in tool gripping force even after 20,000 collet attachments and detachments - Compatible with BT (BBT), HSK, CAPTO Machining tool holders, collet press-fit type, dedicated hydraulic equipment, no heating required, skill-free, hygienic. *For more details, please refer to the PDF document or feel free to contact us.
Just attach it to the machining center. It can operate with coolant pressure, air, and spindle rotation power! There are plenty of clamp variations available for different applications.
We realize work transportation and fixture changeover in machining centers. What is a material handling holder that contributes to the automation of manufacturing? It is a holder that handles (picks up and transports) materials within a machining center, designed to accommodate various shapes through custom design. It is recommended for those who are "manually changing workpieces" or "experiencing equipment downtime every time a fixture change is made." We have compiled past design examples and other information into a PDF document. Please feel free to download it or contact us for more information. 【Features】 ■ Simply attach it to the machining center ■ Custom design accommodates various shapes ■ No need for large investments like gantry loaders or robots ■ No teaching required like with robots ■ No special power source needed
【No special power required】 Just install it on the machining center! Custom design accommodates various shapes. Includes past design examples.
We would like to introduce the "Material Handling Holder" handled by Fujiseiko Co., Ltd. This holder is used for handling materials within a machining center, designed to grip and transport materials, and can accommodate various shapes with custom designs. It is recommended for those who are "manually changing workpieces" or "experiencing equipment downtime every time they change fixtures." 【Features】 ■ Simply attach it to the machining center ■ Custom design to accommodate various shapes ■ No need for significant investment or teaching ■ No special power source required
Achieving high-precision blind hole machining with a machining center: A boring holder equipped with an optimal guide pad.
The GB tool consists of a leading blade: 2 pieces and a finishing blade: 1 piece. By utilizing an optimal guide pad arrangement tailored to cutting resistance, it self-guides the holes it has processed, achieving excellent roundness and straightness in hole drilling on a machining center. Additionally, it features a unique fine adjustment mechanism that allows for easy setup.
Tool attachment and detachment with straight motion only - Tool change system for robotic processing.
The "ATC Stub Holder" is a quick change system for robotic processing that allows the tip of the hand changer to be interchangeable with multiple tools. The exchange method employs a mechanical mechanism, eliminating the need for power sources such as electricity or air, allowing for direct attachment to existing robots. It enables speedy tool changes and contributes to "increased productivity," "reduced investment," and "support for a variety of products." 【Features】 ■ Contributes to reduced investment by eliminating the need for multiple hand changers ■ Easy tool change without the need for a power source ■ 30% increase in productivity due to reduced tool exchange time ■ Easy replacement of the tip of the robotic hand changer *For more details, please download the PDF or feel free to contact us.
Advanced gear tooth chamfering processing! Equipped with a drive mechanism on the holder to achieve general-purpose machining.
The "Hatori-kun" is a processing holder that eliminates the need for cutter phase alignment with the workpiece by having the cutter follow along. The built-in spring allows for adjustment of the engagement pressure according to the cutter size. Additionally, it contributes to the production of various types in gear processing and reduces capital investment. Please feel free to contact us when you need assistance. 【Features】 ■ 30% reduction in capital investment through general-purpose machinery ■ Smooth tooth engagement achieved with a compression mechanism ■ Quick-change cutter replacement allows for handling multiple varieties ■ General-purpose machinery enabled by cutter following and compression mechanism ■ Setting gauges for tooth alignment are also available in the lineup *For more details, please download the PDF or feel free to contact us.
Is there a holder that has been discarded because it was given up on being repaired? It can be refurbished at Fuji Seiko!
Are there any holders that you have given up on repairing and are planning to dispose of? If it's from Fuji Seiko, it might be possible to restore it through repair. Please feel free to consult with us.
