Hopper Product List and Ranking from 54 Manufacturers, Suppliers and Companies

Elimination of residual resin powder and resin chips in the suction transport hopper.

Introducing a case study on the installation of a hopper for the suction transport of resin chips and resin powder!

We would like to introduce a case where the residual resin powder and resin chips in the suction hopper were eliminated. The customer was discharging and transporting materials by suctioning horizontally from the bottom of the hopper, but there was a problem where materials remained on the opposite side and sides of the suction inlet, rendering the level switch ineffective due to this residue. We installed one blow disk of type BD-15 on each of the three sides, excluding the side with the suction inlet. Using a controller C-SV1 with one built-in solenoid valve, we simultaneously aerated all three disks. The air ON and OFF times were determined based on the observed effects on-site. 【Process Leading to Implementation】 1. Consultation from the customer (disclosure of hopper drawings and contents) 2. Guidance on recommended models and layout from our company 3. Free loan of blow disks 4. Customer installs the blow disks and manually turns air ON and OFF to confirm effectiveness 5. Positive results lead to the introduction of blow disks and controller *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper for agricultural machinery

Molding acrylic-modified PVC with added light resistance!

We molded acrylic-modified PVC with added light resistance. An aluminum mold was used due to the transparency of the material. Additionally, we provide products tailored to the usage conditions of the products.

Company：依田工業所
Price：Other

plastic
Hopper

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Large product support available] Consistent support from buff polishing finish for sanitary products and more.

From design to finishing of mass-produced items and one-of-a-kind products.

Our company utilizes a large site area to respond to customer needs, regardless of size, with our factory facilities. We have separate processing areas for different materials such as iron and stainless steel, and we manufacture products for a wide range of industries, from mechanical parts to pharmaceuticals and food. <Our Strengths> ■ Large item support ■ Sanitary product support ■ Buff polishing finish ■ From mass-produced items to one-off products *If you have any concerns, please feel free to download the PDF or contact us.

Company：ヒラ・テック
Price：Other

Processing Contract
Mechanical Design
Contract manufacturing
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New Aeration Hopper for the Chemical Industry

Eliminate powder blockages, rat holes, and bridges!

In the chemical industry, efficient handling of powder raw materials is essential for improving productivity and reducing costs. Powder blockages, rat holes, and bridges can cause manufacturing processes to stagnate and lead to waste of raw materials. The new aeration hopper solves these issues by smoothly fluidizing the powder and ensuring stable discharge. 【Application Scenarios】 - Storage and supply of powder raw materials - Streamlining mixing and reaction processes - Reducing the risk of foreign material contamination 【Benefits of Implementation】 - Increased productivity - Reduced raw material loss - Ensured stable quality

Company：Volkmann Japan
Price：Other

Other machine elements
Powder Conveyor Device
Food Conveyor Equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aeration Hopper for the Cement Industry

Eliminate powder blockages, rat holes, and bridges!

In the cement industry, a stable supply of raw materials during the manufacturing process is essential. In particular, blockages and uneven distribution of powder (cement) within the hopper can lead to decreased production efficiency and variations in quality. Our new aeration hopper addresses these challenges by smoothly fluidizing the powder and ensuring a stable flow rate. 【Application Scenarios】 - Cement manufacturing plants - Supply to silos - Supply to weighing systems 【Benefits of Implementation】 - Stabilization of powder supply - Improvement in production efficiency - Reduction of raw material loss

Company：Volkmann Japan
Price：Other

Other machine elements
Powder Conveyor Device
Food Conveyor Equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aeration Hopper for Ceramics

Eliminate powder blockages, rat holes, and bridges! New air aeration hopper.

In the ceramics industry, the uniform dispersion of raw materials affects product quality. In particular, blockages and imbalances that occur during the supply process of powdered raw materials can lead to a decline in product quality and a decrease in production efficiency. The new aeration hopper addresses these challenges by smoothly fluidizing the powder and promoting uniform dispersion. 【Usage Scenarios】 - Mixing and dispersion processes of ceramic raw materials - Powder supply from hoppers - Powder transport lines 【Benefits of Implementation】 - Stabilization of powder supply - Reduction of raw material loss - Improvement in production efficiency

Company：Volkmann Japan
Price：Other

Other machine elements
Powder Conveyor Device
Food Conveyor Equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cyclone Hopper: Bucket for Cyclone (2/2)

We offer standardized cyclone units at short delivery times and lot prices!

We would like to introduce the "Cyclone Bucket (2/2)" handled by Fujitatec Co., Ltd. It comes with a fall prevention wire when the clamp is released, and the clamp can be easily attached and detached. Additionally, it features a Heller connection, allowing for compatibility with products from other manufacturers. Please feel free to contact us when you need assistance. 【Features】 ■ Contents are fully visible ■ Easy clamp attachment and detachment ■ Fall prevention wire included when the clamp is released ■ Compatible with products from other manufacturers *For more details, please refer to the PDF document or feel free to contact us.

Company：フジタテック本社
Price：Other

Other machine elements
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Smoothly feed powder or liquid into the filling machine! Stainless steel hopper [THT]

Stainless hopper ideal for filling machines, custom-made to fit your equipment.

【Features】 - This is a hopper designed for material feeding. - The hopper has a sharp angle of 60 degrees, allowing for smooth feeding. - It can be easily installed if your current equipment or tank lid has a helix pipe. 【Specifications can be modified】 - Specifications can be changed to suit your equipment. - The size of the helix at the discharge outlet can be changed. - The type of discharge outlet can also be modified; it can be changed to a flange or nipple. Please consult us.

Company：MONOVATE(旧：日東金属工業) 八潮工場
Price：Other

Food Processing Equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0074 Powder measurement, bridge prevention for air transport hopper

Hitting with a stick and the hopper becoming uneven or the welds cracking due to impact have also been eliminated!

At a synthetic resin manufacturer, they are measuring powder using an air transport hopper, which also serves as a dust collector hopper. They experienced discharge issues with this hopper, and neither a knocker nor a vibrator was effective. Additionally, a wire mesh filter installed just above the discharge outlet was severely clogged, causing them trouble, which led them to consult us. They adopted the Brodydisk (installed in the regular hopper section) and the Brodydisk Mini (installed just above the discharge outlet), which resolved their issues. This user mentioned that, in addition to the current powder, they sometimes handle "very poorly flowing and highly adhesive troublesome fine powders," so they installed more Brodydisks than usual compared to typical cases. Since Brodydisks are inexpensive, installing multiple units does not impose a significant burden on the user. We have published numerous case studies on our website. You can check them out through the link below. Please feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Case Study] Repeat Recruitment - Cement Industry

Bridge measures using cement and aggregates! Introducing case studies of solutions by powder handling professionals!!

This is a bridge prevention measure for cement and aggregates. Originally, it was implemented to prevent bridging caused by vibrations (which occasionally led to discharge troubles), but since the introduction of the blow disk a few years ago, discharge troubles have become nonexistent, so we continue to use this equipment. This time, blow disks have been installed in three hoppers. The blow disk releases air along the inner wall of the hopper while simultaneously vibrating a silicone disk. These actions allow the powder inside the hopper to easily fluidize, effectively resolving rat holes and bridging issues. This equipment is highly effective, easy to install, and economical! We encourage you to give it a try. 【Hopper Overview】 - Hopper diameter: 900φ, discharge diameter: 150φ, number of hoppers: 3 *For more details, please contact us or download the catalog to view.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0217 Solving hopper clogging of filter aid powder

Easily solve powder bridges that cannot be resolved with knockers or vibrators!

It seems that the brand of filtration aid that was used for a specific reason by the user was changed to a substitute, which led to clogging occurring in the small hopper. Since it is a small hopper, the installation of the Brody Disk Mini was evaluated to have immediately resolved the issue. It has also received positive feedback for being more cost-effective than expected. 【Hopper Overview】 ■ Size/Shape: 400φ eccentric hopper ■ Incline: The gentlest slope is 60°, while the opposite side is nearly vertical ■ Outlet: 150φ 【Powder Overview】 ■ Angle of repose: 60° ■ Average particle size: approximately 20μm ■ Moisture content: 2-3% ■ Composition: Mostly SiO2 *For more details, please refer to the catalog. Feel free to contact us with any inquiries. *Our website features numerous case studies, which can be accessed via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0221 Introduced to a 400φ eccentric hopper

Easily solve powder bridges that cannot be resolved with knockers or vibrators!

At a chemical manufacturer in the Setouchi region, when resin powder is rapidly fed into a 400φ eccentric hopper, it tends to form a bridge near the discharge outlet. Therefore, this hopper has been installed in that location. Since this area is explosion-proof, the air is manually turned on only when a bridge occurs. Minagi can also provide a controller using an air timer that does not require electricity. 【Hopper Overview】 ■ 400φ Eccentric Hopper ■ Discharge Outlet Diameter --- 80φ ■ Incline --- Approximately 60° at a gentle position, generally vertical on the opposite side 【Powder Overview】 ■ Functional materials, resin powder ■ Fine powder *For more details, please refer to the catalog. Feel free to contact us with any inquiries. *Our website features numerous examples of implementations, which can be checked via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Powder Conveyor Device
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Installed on the pharmaceutical (active ingredient) hopper.

Introducing a case of a Brody disk adopted for a pharmaceutical manufacturer's grinding machine hopper.

This is an introduction to a case where the "Brodie Disk" was adopted for a pharmaceutical manufacturer's crusher hopper. We have received the hopper drawings and powder characteristics, and based on this, we provide advice on the installation position. Our company offers guidance on models and configurations tailored to the user's conditions. Since this case involves pharmaceuticals, we have changed the material of the metal parts of the equipment to the specified ones. Although this is a different case, we also have custom specifications of the Brodie Disk that are often adopted in the pharmaceutical field. 【Overview of Usage Conditions】 ■ Hopper Dimensions: 350×700 ■ Discharge Section Dimensions: 150×150 ■ Powder Type: Pharmaceutical Raw Material ■ Powder Particle Size: Approximately 200μm (50% diameter) ■ Powder Angle of Repose: Approximately 45° *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous examples of implementations. You can check them from the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0149 Small hopper, prevention of rat holes and bridging in food powders.

Prevent rat holes and bridges in food powder within small hoppers!

An air vibrator was used as a countermeasure for poor powder discharge, but in some cases with certain powders, it did not work well, leading to the installation of our product. During testing, the material was a relatively good-flowing powder, and the installation of two BroaDisk Minis improved the discharge issues. However, it was noted that there may be cases in the future with materials that have significantly poor flowability, resulting in the adoption of four BroaDisk Minis. With the introduction of our product, there are currently no occurrences of rat holes or blockage phenomena with any materials. 【Overview】 ■Typical material: Supplement food powder, 100 mesh and under ■Hopper diameter: 400φ ■Discharge outlet diameter: 50φ ■Hopper incline: 45 degrees *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies, which can be accessed via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0328 At the molding factory for resin sheets and hoses

There are various types of raw materials and hoppers, and we will introduce case studies where bridging occurred.

At a facility that manufactures various types of resin sheets and hoses, we have adopted a large number of Bro-Disk Mini units. There are many types of raw materials and hoppers, and depending on the conditions, bridging can occur even with virgin materials. After reviewing the individual hopper drawings, we provided layout proposals for each, which were subsequently adopted. After implementation, the initial issues were resolved immediately. 【Overview】 ■ Hopper Size ・Diameter: 300φ to 500φ ・Discharge Outlet: 50□, 50φ, 70φ, etc. ■ Raw Material ・Resin Pellets *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0338 Measures applied for phenolic resin chips.

Based on past experiences, we have provided guidance regarding the model and layout plan.

This is a case where a factory that introduced a bag filter for dust collection of non-combustible phenolic resin (in the form of chips) experienced a blockage in the hopper shortly after starting operation. After reviewing the dust collector's drawings during the initial inquiry, you sent us material samples. Upon confirmation, we found no particular concerns based on past experience, so we provided guidance on the model and layout plan. The installation was completed promptly, and the issue was resolved immediately. 【Hopper Overview】 ■ Approximately 1500×1500 ■ Discharge section 200×200, discharged via a rotary valve 【Layout and Operation Method Overview】 ■ 2 units installed on one side, totaling 8 units One unit near the discharge section (center left/right) and one unit above it (positioned towards the corner to reduce the risk of residue in the corner) ■ Controlled by a controller with 4 solenoid valves, air is turned on sequentially in pairs * For more details, please refer to the PDF document or feel free to contact us. * Our website contains numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery to manufacturers of dust collectors and related equipment.

To implement sufficient measures against the frequent occurrence of rat holes! Introducing case studies of Brody disks.

We would like to introduce a case where our "Brodisk" was delivered to a manufacturer that produces powder-related equipment. This was a project for a new customer, who requested, "The material frequently causes rat holes, so we would like you to take sufficient measures." To ensure thoroughness, we installed a total of 8 units in 2 tiers, with 4 units for this hopper. During the on-site trial operation, there were no troubles at all, and we received positive feedback. Since our product is an economical device, increasing the number of installations does not significantly impact the total cost. In this case, the controller remains the same whether 4 or 8 units are installed, so the cost difference between 4 and 8 units is not substantial. Therefore, it is very rational. [Overview] - Material: Calcium Carbonate - Hopper Diameter: 1500φ - Discharge Section: 200A *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous examples of implementations. You can check them via the link below.

Company：ミナギ
Price：Other

Other machine elements
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0351 Prevention of bridging in the metering hopper for the dryer.

Measures to prevent bridging in the hopper of a quantitative feeder! Introducing a case study of the Brody disk.

This is a case where we were consulted about occasional bridging occurring in the hopper of the quantitative feeder in the drying equipment for wood chip Kiriko. After reviewing the material sample, we determined that there was no significant risk based on our experience. As usual, we provided the customer with recommendations for the selection and arrangement of the "Blow Disk" model, and it was implemented promptly. After the installation of this equipment, bridging did not occur even with changes in seasons or other conditions, and it was evaluated that workers no longer needed to stir with a stick from the manhole. [Overview] ■ Capacity: 2000L ■ Size: 1200×1200 ■ Incline: 2 sides, 45 degrees (the remaining 2 sides are vertical) * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous implementation examples, which can be checked via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0360 Eliminate rat holes in green tea powder.

Eliminating the rat hole phenomenon in hoppers! Introducing a case study of the Brody Disk Mini.

This is a case where the crushing conditions provided by the crusher manufacturer became more detailed, leading to the occurrence of the rat hole phenomenon inside the hopper, and they consulted us saying, "There's nothing we can do!" This time, we installed a solution for the rat hole in the product receiving hopper (250φ) at the bottom of the cyclone. By changing the height and installing three Brody Disk Minis in this hopper, the problem was resolved. 【Equipment Flow】 ■ Crusher → Collection Cyclone → Bottom Hopper of Cyclone → Rotary Valve 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign material contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous implementation examples. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0358 Residual measures at the four corners of the angle hopper

Air is blown along the inner wall surfaces of hoppers and silos! Introducing case studies of Brody disks.

This is a case adopted by a factory primarily engaged in the manufacturing of refractory materials. The hopper in question has a sufficiently large discharge area, and while bridging does not occur, there was an issue with residual material in the four corners due to its square shape. Based on past experience, we advised installing the equipment closer to each corner, and it was set up accordingly. After implementation, the user has reported that they are now able to discharge the entire amount. 【Overview】 ■ Target hopper: Weighing hopper ■ Hopper shape size: Square, 1000×1000 ■ Hopper discharge area size: 300×300 ■ Target material: Mixtures including calcium hydroxide *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

At the hopper of the test powder processing device.

Towards an ideal control method! Introducing a case study of the implementation of Brodisk at a chemical company.

This is a case where a Brodie disk was installed in the hopper of a powder processing test device at a chemical company. The material being processed was quite fine and had poor flowability, and the discharge from the hopper was through a butterfly valve, which contributed to bridging issues. The discharge diameter was relatively small, making it crucial to address this area first. Therefore, two Brodie disk minis were installed in this vicinity. Additionally, two Brodie disks were installed above, resolving the problem. However, later on, the processed materials varied greatly, and some of them had a low specific gravity and were prone to scattering. To suppress dust dispersion, a controller with four solenoid valves was introduced. [Overview] ■ Hopper diameter: 600φ ■ Discharge diameter: 80φ *For more details, please refer to the PDF document or feel free to contact us. *Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Delivery to the manufacturer of fuel cell materials.

If it's related to batteries, we have a proven track record of many applications in secondary batteries as well!

This is an inquiry we received from a customer regarding the use of a Brodie disk as a bridge measure for fuel cell-related components. We did not receive any information about the raw materials, but we were informed only about the overview of the hopper, and after providing general layout information, it was decided to proceed with the introduction. Since we had no other information, we checked the situation after a while following the product delivery and received a response that it was "being used without any issues." 【Hopper Overview】 ■ Conical hopper (diameter less than 1000φ) * For more details, please refer to the PDF materials or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0402 First, visit our company for your loan request (resin recycled material).

Frequent bridge failures occur, so I want to resolve this as soon as possible! Case study of Brodisk Mini adoption.

This is a case we received a call about from a company in Osaka that is engaged in plastic molding. Despite having a very tight deadline for a large order of a new product, they expressed a desire to resolve frequent bridging issues as soon as possible. They brought a sample of the material that was bridging, and upon inspection, it was a type of material we are quite familiar with, so we had no particular concerns. We guided them on the placement of the blow disc and provided the necessary quantity on the spot. We received a report that it was installed the same day and the results were good, and at the same time, they placed an order for the equipment and controller. [Overview] ■ Hopper Overview: Suction transport hopper approximately 200φ ■ Target Material: Plastic recycled material (pellets + powder... with a relatively high amount of powder) * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0406 Elimination of residual silica-based powder

This is an introduction to a case that was implemented due to an incident where the processed material remained on the R surface of the rounded hopper.

To our customers engaged in plant engineering, we have introduced this equipment due to an incident in a past plant where residual material was left on the rounded corners of the hopper. The customer selected the model and planned the layout, and ultimately contacted us to confirm if there were any issues. The model and layout were ideal, and we provided advice on the operating methods, leading to its adoption. 【Overview】 ■ Hopper: 1800×1800 (Bottom: 800φ) ■ Material: Silica-based powder (Bulk density 0.1, Angle of repose 45°) ■ Operating method: Controlled by a built-in controller with 4 solenoid valves, activating 8 blow discs in pairs * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Measures for the dust collector hopper for the grinding machine.

After actually seeing it, you judged, "This should work." We have implemented it.

This is a case in which we received an inquiry to resolve the bridging occurring in the hopper section of a dust collector. The customer sent us the equipment drawings and a sample of the material, so we started by providing a layout proposal for the blow disk based on that. We informed them that there were no significant risks observed with the powder sample we reviewed. The person in charge contacted us expressing a desire to see the actual blow disk, so we set it up on a plate that simulated the hopper wall and sent it to them. The customer connected air to it and observed the air injection and vibration of the blow disk, concluding that "this should work." They decided to proceed with the installation. The results, of course, have been favorable. [Overview] ■ Hopper upper dimensions: approximately 4000×2000 ■ Hopper bottom dimensions: approximately 3000×300 ■ Material: calcium silicate polishing powder (bulk density approximately 0.3) * For more details, please refer to the PDF document or feel free to contact us. * Our website features numerous case studies. You can check them out via the link below.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0482 Pharmaceutical raw material hopper

Testing conducted by the customer using our standard model! Introduction of an example adopted by a certain pharmaceutical company.

We received a consultation from a certain pharmaceutical company regarding the occurrence of bridging in the pharmaceutical raw material hopper, and they would like to address this issue with aeration using our equipment. After disclosing the hopper drawings and powder properties, we provided an example of the equipment layout. The customer conducted tests using our standard model (with product loaned) and confirmed its effectiveness. Subsequently, there were requests for special specifications, and after detailed discussions, we finalized the specifications and proceeded with production and delivery. Our company also accepts inquiries for special specifications, including various materials. Please feel free to consult us. 【Installation Overview】 ■ Target Material: Pharmaceutical Raw Material ■ Hopper Diameter: φ400 ■ Discharge Diameter: 3S ■ Number of Units: 3 Brody Disk Minis installed in 2 tiers (total of 6 units) *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0478 Small hopper, with fine powdered wheat flour

We assist our customers with selecting models and planning layouts according to their requirements!

We received contact from a customer who has experience using our Broa Disk. They experienced a bridge in the hopper for fine flour, so they installed two of their available Mini Broa Disks. While there was some effect, it did not completely resolve the issue, and they inquired about the possibility of adding a few more units. They requested a loan of the additional units. It was noted that two units were already installed near the discharge area (which is an ideal position), and based on the situation during testing, we determined that it would be best to install four units directly above the existing ones and sent the necessary quantity. The customer conducted a test, and the results were favorable, leading to their adoption of the solution. [Case Summary] ■ Subject: Flour... finer than usual (similar to matcha) ■ Hopper: Diameter 350φ / Discharge 3S *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0484 Green tea powder: at the suction hopper

The loan of the equipment sample has been approved after obtaining the consent of the end user!

There have been ongoing issues with bridging in equipment for major beverage manufacturers, and we received inquiries from businesses engaged in the design and manufacturing of machinery. First, after reviewing the drawings of the target hopper, we proceeded with 1) guidance on the model and layout, 2) lending equipment samples, and 3) obtaining approval from the end user (the beverage manufacturer), leading to our adoption. After delivery, this equipment has received very positive feedback, resulting in numerous repeat adoptions. 【Case Overview】 ■ Target Material: Green Tea Powder ■ Target Hopper: Suction Hopper ■ Hopper Diameter: φ600 ■ Discharge Diameter: 2S 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is crucial in terms of the risk of foreign material contamination, so strength and durability are very important. The silicone disk in our equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0517 φ600 (discharge section φ50) for air transport hopper

Installed two standard Brodisks and two Brodisk Minis! A case where the clogging was resolved.

We would like to introduce a case where we addressed a blockage at the bottom of an air transport hopper in a cosmetics raw material factory. The flowability of the raw material was not significantly poor, but the small diameter of the hopper discharge section, φ50, seemed to be the main cause of the blockage. To resolve this, we installed two standard blow discs slightly below the center of the hopper and two mini blow discs near the discharge section. As a result, the blockage was eliminated. 【Case Overview】 ■ Hopper Diameter: φ600 ■ Discharge Diameter: φ50 (air transport from the discharge section) ■ Hopper Apex Angle: 60° ■ Raw Material: Cosmetics raw material (fine powder) ■ Control: Intermittent operation with a total of four blow discs (mini) with simultaneous air ON/OFF *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0539 Used in air transport device hopper (TiO2)

Installed in the hopper of the air transport device! Example using the standard type Brody disk (BD-15).

As a measure against titanium dioxide bridging, it has been installed in the hopper of the air transport device. According to user experience, there are no particular issues with the bottom of the hopper, which is equipped with a sintered metal mesh strainer. However, to prevent bridging in the hopper above, a blow disk has been adopted. In this case, the standard blow disk type (BD-15) is being used, but for materials with very poor fluidity, we may recommend a version with a higher air volume (BD-20). 【Product Specifications】 ■ Blow Disk: BD-15S-B x 3 ■ Controller: C-SV1 x 1 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper Product List and Ranking from 54 Manufacturers, Suppliers and Companies | IPROS GMS

Hopper Manufacturer, Suppliers and Company Rankings

Hopper Product ranking