Hopper Product List and Ranking from 54 Manufacturers, Suppliers and Companies

0478 Small hopper, with fine powdered wheat flour

We assist our customers with selecting models and planning layouts according to their requirements!

We received contact from a customer who has experience using our Broa Disk. They experienced a bridge in the hopper for fine flour, so they installed two of their available Mini Broa Disks. While there was some effect, it did not completely resolve the issue, and they inquired about the possibility of adding a few more units. They requested a loan of the additional units. It was noted that two units were already installed near the discharge area (which is an ideal position), and based on the situation during testing, we determined that it would be best to install four units directly above the existing ones and sent the necessary quantity. The customer conducted a test, and the results were favorable, leading to their adoption of the solution. [Case Summary] ■ Subject: Flour... finer than usual (similar to matcha) ■ Hopper: Diameter 350φ / Discharge 3S *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0484 Green tea powder: at the suction hopper

The loan of the equipment sample has been approved after obtaining the consent of the end user!

There have been ongoing issues with bridging in equipment for major beverage manufacturers, and we received inquiries from businesses engaged in the design and manufacturing of machinery. First, after reviewing the drawings of the target hopper, we proceeded with 1) guidance on the model and layout, 2) lending equipment samples, and 3) obtaining approval from the end user (the beverage manufacturer), leading to our adoption. After delivery, this equipment has received very positive feedback, resulting in numerous repeat adoptions. 【Case Overview】 ■ Target Material: Green Tea Powder ■ Target Hopper: Suction Hopper ■ Hopper Diameter: φ600 ■ Discharge Diameter: 2S 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is crucial in terms of the risk of foreign material contamination, so strength and durability are very important. The silicone disk in our equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is important! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Installed on the hopper with internal fluororesin coating.

Measures against rat holes! Introducing a case of fluororesin coating and the installation of a brodie disk.

Here is a case study of our engineering company being adopted. According to the customer, there was initially a concern about rat holes in the project, and although a fluororesin coating was applied as a countermeasure, the results were not satisfactory. This time, they wanted to address the issue by installing a fluororesin coating along with a blow disk for the expansion of similar equipment. After delivery, we confirmed that the results were evaluated positively. [Case Overview (Partial)] ■ Hopper - Weighing tank - Diameter φ2000 - Discharge diameter φ300 ■ Gas used: Nitrogen ■ Temperature: Room temperature [Key Points of Our Equipment] ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of our equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0517 φ600 (discharge section φ50) for air transport hopper

Installed two standard Brodisks and two Brodisk Minis! A case where the clogging was resolved.

We would like to introduce a case where we addressed a blockage at the bottom of an air transport hopper in a cosmetics raw material factory. The flowability of the raw material was not significantly poor, but the small diameter of the hopper discharge section, φ50, seemed to be the main cause of the blockage. To resolve this, we installed two standard blow discs slightly below the center of the hopper and two mini blow discs near the discharge section. As a result, the blockage was eliminated. 【Case Overview】 ■ Hopper Diameter: φ600 ■ Discharge Diameter: φ50 (air transport from the discharge section) ■ Hopper Apex Angle: 60° ■ Raw Material: Cosmetics raw material (fine powder) ■ Control: Intermittent operation with a total of four blow discs (mini) with simultaneous air ON/OFF *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0539 Used in air transport device hopper (TiO2)

Installed in the hopper of the air transport device! Example using the standard type Brody disk (BD-15).

As a measure against titanium dioxide bridging, it has been installed in the hopper of the air transport device. According to user experience, there are no particular issues with the bottom of the hopper, which is equipped with a sintered metal mesh strainer. However, to prevent bridging in the hopper above, a blow disk has been adopted. In this case, the standard blow disk type (BD-15) is being used, but for materials with very poor fluidity, we may recommend a version with a higher air volume (BD-20). 【Product Specifications】 ■ Blow Disk: BD-15S-B x 3 ■ Controller: C-SV1 x 1 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of the risk of foreign matter contamination, as well as strength and durability. The silicone disk of this equipment excels in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0557 To the hopper of flake-like chemicals

Confirm the effects with a loan! We can provide information on model selection, placement, control examples, etc.

This is a case where we received a consultation stating, "The hopper's slope is very gentle, and we are having trouble discharging the stored material." The user confirmed the effectiveness with the loaned Brody disk, and as a result, it was successfully implemented. During the loan (test use), we assist with model selection and layout planning. Customers interested are encouraged to consult with us. 【Overview】 ■ Hopper diameter: φ1000 ■ Discharge diameter: 150A ■ Slope angle: 40° or less ■ Target material: Flake-shaped chemicals (size = approximately 5-10mm, bulk density = about 0.7) 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk of this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Other processing machines
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0603 Residuals of Wallpaper Crushing Products and Bridge Countermeasures

Residual powder in the corners that the agitator can't reach! Introducing a case where it was resolved with a Brody disk.

In the hopper for crushed wallpaper (with an agitator installed as a bridge countermeasure), powder was left in the corners that the agitator could not reach. We installed our "Brodisk" to eliminate the residue. Additionally, for another project, we planned without an agitator, which also resolved the issue. If you provide us with information about the contents and hopper diagrams, we can guide you on suitable configurations and controls based on the user's conditions, so please feel free to contact us. 【Implementation Overview】 ■ Target Material - Crushed wallpaper - Appears as powder or fibrous - Bulk density: approximately 0.2 to 0.3 (varies by material) ■ Hopper: approximately 800×1000 (2-sided slope) ■ Discharge: Screw feeder 【Key Points of This Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability due to the risk of foreign matter contamination. The silicone disk in this equipment is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0638 Solve rat holes with a gentle slope hopper.

Place the Brody Disk Mini to mitigate the risk of clogging at the discharge port! Introducing a case study on solving rat holes.

We would like to introduce a case that was consulted by a machinery manufacturer who has adopted our equipment multiple times. During the trial operation, the amount of raw material fed into the hopper was about half of its capacity, and there were no issues. However, once actual operation began, rat holes occurred, and they contacted us to implement measures using a blow disk. After reviewing the hopper diagram and powder samples, we provided information on the recommended model and configuration. The results of their adoption have been evaluated as very good. 【Case Overview】 ■ Issue - Rat holes occurred during trial operation ■ Overview of Our Equipment Configuration - Installed 4 standard blow disks - Installed 2 mini blow disks near the discharge area below ◆◆ Key Points of Our Equipment ◆◆ ◎ The elastic disk (silicone disk) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. We believe that the silicone disk of our equipment is exceptionally strong and durable. Once you use it, you will understand! ◎ Although our equipment has a simple structure, control (how to aerate?) is crucial! We provide guidance on what should be done. We also have a dedicated controller prepared.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

At the cellulose fiber hopper 0643

Increase aeration frequency! Introducing a case study that solved the "unmanageable bridge."

We received a call from a customer saying, 'A bridge has formed in the cellulose fiber hopper, and there's nothing we can do about it.' After requesting the materials sample and drawings for confirmation, we found that although it was a challenging sample, there were similar conditions with proven results. Based on our experience, we proposed the introduction of a blow disk, which was subsequently adopted. By increasing the frequency of aeration (shortening the air ON interval) and raising the air pressure compared to general usage conditions, we resolved the 'bridge that seemed impossible to fix.' [Case Summary (Partial)] ■ Issue - A bridge formed in the cellulose fiber hopper ■ Result - By increasing the frequency of aeration (shortening the air ON interval) and raising the air pressure compared to general usage conditions, we resolved the 'bridge that seemed impossible to fix.' *Detailed information about the case can be viewed through the related links. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0652 At the pigment hopper (with variety change cleaning)

Easily solve powder bridging! We will introduce case studies of BroaDisk.

We would like to introduce a case study of the "Brodisk." This equipment was adopted for bridge prevention in a pigment hopper. The user has several product changes each month, and the hopper is washed with water each time. They requested to see whether the Brodisk could be easily attached and detached during this process, so we sent the equipment for their use. 【Case Overview】 ■ Target Material: Pigment + Dispersant (fine powder: several μm) ■ Hopper Diameter: Ø300 ■ Discharge Diameter: Ø100 【Key Points of Our Equipment】 ■ The elastic disk (silicone) is very important in terms of strength and durability to mitigate the risk of foreign material contamination. Our silicone disk is exceptionally strong and durable. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please refer to the PDF document or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0680 Case Study on the Bridge Phenomenon of Inorganic Pigments

Introducing a case study on resolving bridging at the outlet of the raw material hopper in the conveying system.

We would like to introduce a case study where our "Brodisk" was adopted. A strong bridge formed just above the discharge section. Even hitting it with a resin hammer did not result in any discharge, and only a little material came out when poked from below with a stick. We grasped the situation through email and phone communication, and provided guidance on the recommended model, layout, and control. [Case Overview (Partial)] ■ Target Powder: Inorganic Pigment (Particle Size: Less than 1μm) ■ Hopper Diameter: φ600 ■ Discharge Diameter: φ50 [Key Points of This Equipment] ■ The elastic disk (silicone) is very important in terms of strength and durability, especially considering the risk of foreign material contamination. The silicone disk of this equipment is highly superior in strength and durability. Once you use it, you will understand! ■ Control (how to aerate?) is crucial! We provide guidance on what should be done. A dedicated controller is also available. *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0686 Bridge elimination of alloy micropowder (small hopper)

Inquire about the properties of the contents and check the hopper drawing! Case study of solving issues with the introduction of the Brody Disk Mini.

We would like to introduce a case where our "Brodisk" has been helpful in a manufacturing plant for grinding and polishing tools. The user consulted us about a bridge formation in the hopper of the powder feeder, which could not be resolved by the impact of a knocker or the vibration of a vibrator. First, we listened to the characteristics of the material and checked the hopper drawings. After that, we informed them of the recommended model and layout of our equipment and lent them a "Brodisk Mini." After testing it, the user found the results satisfactory and decided to additionally introduce a controller. 【Target Hopper】 ■ Size: 200×200 ■ Discharge section: 30×80 ■ Discharge mechanism: Screw ■ Inclined surfaces: 3 surfaces (1 surface is vertical) ■ Layout: One unit installed on each of the two opposing inclined surfaces out of the three mentioned above. *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

At the gypsum board dust collection hopper.

Turn on 8 Brodisks in pairs with a time delay! A case where the customer's issue was resolved without any problems.

We would like to introduce a case where a "blow disk" was installed in the hopper section of a dust collector at a recycling factory. The customer faced issues with the dust collector hopper, where a bridge (powder clogging) occurred above the discharge rotary valve during the crushing of gypsum boards. The square hopper retained powder in all four corners, leading to a blockage of the discharge section when the residual material fell all at once. We placed one blow disk (Type 15) slightly above the discharge section on each side, and additionally, one more of the same type of blow disk was positioned at the corners of the hopper above this, resulting in a total of 8 blow disks (2 per side). By using a controller (C-SV4) equipped with 4 solenoid valves, we activated the 8 blow disks in pairs with a time delay, effectively resolving the customer's issues without any problems. 【Equipment and Other Conditions】 ■ Hopper Dimensions: 1500×1500 ■ Discharge Section Dimensions: 200×200 ■ Discharge Device: Rotary Valve ■ Material: Crushed Gypsum Board (Dust) *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Other powder equipment
Mixer/agitator
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

0710 Resolving powder clogging in the flexible container receiving tank

A case where we provided recommendations for models and layouts, along with their costs, based on hopper drawings and powder samples.

Here is a case study based on a consultation from users in the Keihanshin area who said, "We are experiencing powder clogging at the discharge section of the bulk bag hopper and would like to improve it at a low cost." They brought the hopper drawings and powder samples for us to review, and based on our experience, we recommended a suitable model and layout along with the associated costs, which they promptly ordered. We followed up later and received high praise, stating, "The powder clogging has been resolved, and we are very satisfied with the cost." 【Case Summary (Partial)】 ■ Hopper Diameter: Ø1300 ■ Discharge Diameter: Ø150 ■ Discharge Valve: Choke Valve (Flow Valve) ■ Material: Aluminum Hydroxide (Fine Particles) ■ Equipment Flow: Bulk Bag → Target Hopper → Discharge Valve → Weighing/Platform Scale *For more details, please download the PDF or feel free to contact us.

Company：ミナギ
Price：Other

Mixer/agitator
Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DSH Systems Inc. Non-powered Dust Suppression Hopper [Demo in Progress]

Rapid and clean loading onto trucks and freight cars. Applicable to various raw materials such as fertilizers! Exhibited at the International Powder Industry Exhibition Tokyo 2020!

Our company handles the "Powerless Drop Dust Suppression Hopper" manufactured by DSH Systems. It is suspended from the chute outlet and installed at an appropriate height above the truck bed or raw material storage area. The raw materials fed into the hopper are naturally agitated during the filling process, which removes air and allows for a strong cylindrical shape to be discharged from the hopper outlet, thereby suppressing dust emissions as they fall into the loading area. This eliminates the need to interrupt other operations within the factory during loading tasks and makes dust collection fans and chute drive devices unnecessary. 【Benefits of Implementation】 ■ No need for operating equipment and no internal moving parts ■ Protects employee health and safety ■ Dust suppression - cost savings on waste disposal ■ Mitigation of dust explosion risks ■ Savings on maintenance and cleaning costs ■ Improved visibility during work, etc. *For more details, please refer to the PDF materials or feel free to contact us.

Company：共伸貿易
Price：Other

Powder Conveyor Device
Other powder equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Hopper SUS for Medical Use

Double-sided #600 grinding, taper bending, TIG welding, and complex shapes are also welcome.

SUS, stainless steel hopper, double-sided #600 polishing, tapered bending, TIG welding, polishing, and we can handle complex shapes as well. At Ogata Esmec, we are capable of advanced manufacturing that responds to difficult consultations in the development stage. We have a track record in manufacturing equipment related to pharmaceuticals, food, LCDs, semiconductors, as well as equipment parts for clean rooms, automotive parts, and special vehicles. Please contact us for more details.

Company：オガタ・エスメック
Price：Other

Processing Contract
stainless
Stainless steel container
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

New Type Aeration Hopper for Food Manufacturing

Eliminate powder blockages, rat holes, and bridges!

In the food manufacturing industry, a consistent supply of raw materials affects product quality. Blockages or imbalances in powdered raw materials can lead to delays in the manufacturing process and a decline in product quality. The new aeration hopper addresses these challenges by smoothly fluidizing the powder and promoting uniform discharge. 【Application Scenarios】 - Weighing and mixing processes of powdered raw materials - Powders that tend to clog during discharge from the hopper - Food manufacturing aiming to stabilize quality 【Benefits of Implementation】 - Reduction of raw material waste - Improvement of manufacturing efficiency - Stabilization of product quality

Company：Volkmann Japan
Price：Other

Other machine elements
Powder Conveyor Device
Food Conveyor Equipment
Hopper

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Hopper Product List and Ranking from 54 Manufacturers, Suppliers and Companies | IPROS GMS

Hopper Manufacturer, Suppliers and Company Rankings

Hopper Product ranking