Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 07, 2026～Feb 03, 2026
This ranking is based on the number of page views on our site.
1531～1545 item / All 1834 items
Sanpelca can perform water jet processing. Depending on the thickness and density, there is a possibility of water jet streaks appearing.
The L-1400 was cut using a water jet cutter, and the image was created for demonstration purposes. It enables three-dimensional processing, which is a feature of 5-axis control. Since it is a widely used material, there is a rich variety of color options available.
The 6 nylon sheets are processed by punching up to about 1 ton. Resin packing and washers are also mass-produced through punching.
6N is a representative polyamide that excels in chemical resistance and impact resistance, is tough yet flexible, and maintains strength over a wide temperature range. When extracting hard materials, we also focus on improving the durability of the molds used for extraction. Extraction processing is possible depending on the thickness, so please contact us for inquiries.
We process olefin foams such as PE and EVA. In addition to processing, we also accept orders for the production of molds.
A-8 is a type of polyolefin foam that is resistant to degradation from water and light, making it a durable material suitable for long-term use. It is processed using a die-cutting method with blades set into a plywood board, commonly referred to as Thomson or bick dies. We also accept inquiries for mold production for animals and other purposes.
Silicone rubber is available in various thicknesses and can be processed quickly. Please leave the gaskets and seals that require hygiene and heat resistance to us.
Silicone rubber is particularly excellent in cold and heat resistance, and it is characterized by very little change in properties within the range of -60° to 250°. It complies with the Food Sanitation Act, making it suitable for use in food machinery and medical devices. We have it in stock as a material for punching. Please feel free to consult us.
PVC is suitable for machining, and subsequent bonding or welding processes are also good. We handle a lot of machining for both gray and transparent materials.
PVC, commonly seen in everyday gray vinyl, is an inexpensive material that is easy to process through bending, welding, and gluing, and is used in a wide range of fields. It has excellent chemical resistance and weather resistance, and its flame retardant properties help prevent the spread of fire. There is also transparent vinyl available. We also accept connections with commercially available PVC standard products, such as those used for plumbing.
We offer processing of plates utilizing the low wear coefficient of Duracon. Please make use of our precise machining for plates and rolls.
POM takes advantage of its excellent durability and is used as an alternative to metal parts. It can also be used for gears, bearings, pulleys, and rollers that require fatigue resistance and wear resistance. It has strong properties against solvents and low water absorption, which provides high dimensional stability during processing, making it suitable for machining and welding.
Sanpelka is processed into a wide range of products such as cushioning materials and insulation materials. L-2000 has a pleasant texture and is also processed for use in case interiors and fixtures.
L-2000 is a polyethylene foam that is 20 times lighter, widely used as cushioning and insulation material due to its lightness, and does not allow liquids to pass through because of its closed-cell structure. It can be processed in one go up to about 50mm thick using punching or water jet cutting. Colors available are white, black, gray, and blue, while red, green, and yellow are made to order. The apparent density is 45kg/m³, and the effective dimensions are 100mm × 1,000mm × 1,000mm, with thickness, width, and length customizable to the required size.
EPDM is a major weather-resistant rubber that is widely used in die-cutting processes. Die-cutting is ideal for cost reduction in mass production of spacers.
EPDM is characterized by excellent weather resistance, ozone resistance, and aging resistance, as well as good electrical properties and high resistance to polar liquids. It is a recommended rubber for outdoor applications, using sheets with a hardness of approximately 65°. We have materials in stock with varying thicknesses, so please feel free to consult us.
It is also called nitrile rubber, and the sheets are processed by die-cutting. Please use die-cutting for mass production of oil-resistant rubber gaskets and similar products.
Nitrile rubber is a representative of oil-resistant rubber and also has good abrasion resistance and aging resistance. We use No. 7783 from Teraoka Seisakusho Co., Ltd. for the double-sided tape. It has excellent heat resistance and conformability to curved surfaces, and is also suitable for punching processing. We have stock available in various thicknesses, so please feel free to consult with us.
Soft Si-300 with a hardness of 25 can be cut using a die-cutting process. Silicone sponge is used as a heat-resistant packing.
Si-300 is a silicone sponge sheet manufactured by San Polymer Co., Ltd., with a hardness of 30° on the surface. It can be sliced to thicknesses ranging from 20mm to 1mm. It has excellent weather resistance and heat resistance (approximately -50°C to 200°C). It also complies with food hygiene standards. Standard products are available in 10° and 20°, with colors including red ochre and black, and white is available for 20° and 30°. Due to its fine independent bubbles, it exhibits excellent sealing properties.
We are adjusting the thickness through milling from the standard plate thickness of MC901. Please leave various processing such as milling from MC nylon plates to us.
MC901 has excellent mechanical strength, heat resistance, chemical resistance, and wear resistance. It is a material widely used in general. It can also be produced using MC nylon from other manufacturers, such as Mitsuboshi Seisakusho. There are processing machines that are advantageous for large quantities. Please feel free to consult with us.
After urethane casting and curing, machining can be performed. Machining from casting can accommodate various thicknesses and dimensional shapes.
This is a process where urethane rubber is poured into a mold and solidified, then machined using a lathe or router end mill. This is something that has been shaved down to a thickness of 0.5mm, resembling a veneer. However, the thickness is the target. Urethane rubber is particularly excellent in abrasion resistance and weather resistance, has very strong tear resistance, and also possesses oil resistance, making it suitable for outdoor use and machine integration.
The dimensional stability of POM is high, and it also performs well in long hole processing. By combining grooves and long holes, parts that can slide can be created.
POM is a resin that excels in mechanical strength and wear resistance. It is widely used as a component in sliding parts. If the dimensions are known, it can be produced from a hand-drawn diagram.
We made cushion rubber from the EPT sheets in stock. Rubber cushions and spacers can be mass-produced at low cost through die-cutting.
Ethylene propylene rubber is excellent in weather resistance, ozone resistance, and aging resistance, making it suitable for long-term use even under outdoor conditions. Since it is a commonly used rubber, we have materials in stock depending on the thickness. We can also discuss the number of lots, so please feel free to contact us.
We can handle everything from sponge processing to the layout of storage items. The contents are well protected even inside the demo case during transport.
B-4, which has a moderate soft feel, is often used in the production of interior products. It is lightweight, flexible, and does not allow water to pass through, similar to a pool kickboard. We will also reflect on layout and current improvement points in conjunction with production.
