Tester Product List and Ranking from 293 Manufacturers, Suppliers and Companies

Leveling Tester

We will check whether there are any unevenness on the coated surface by using a leveling tester instead of a brush and comparing it with a sample product (paint sample).

The leveling tester is used to compare the painted surface for any irregularities caused by the brush when the paint is applied with a brush, using the leveling tester instead of the brush to compare it with a sample product (paint sample). When the test piece is compared to the sample product under diffused daylight, if the peaks and valleys of the surface created by the leveling tester are equal to or smaller than those of the sample product, the leveling of the sample is considered "good."

Company：オールグッド
Price：10,000 yen-100,000 yen

Testing Equipment and Devices
paint
Strength Testing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coating Adhesion Tester (Adhesive Pull-Off Method)

A test cylinder adhered to the coating is pulled using hydraulic pressure, allowing for a mechanically stable measurement of the adhesion strength between the substrate and the coating.

The coating adhesion strength tester, known as the adhesion tester, is a testing machine used to measure the adhesion strength (bonding ability) between the coating and the substrate. According to JIS standards, "the cross-cut test should not be considered a means of measuring adhesion." The cross-cut test involves making cuts through the coating down to the substrate with a cutter, applying tape, and evaluating the coating's resistance to detachment from the substrate by pulling off the tape, with the results being a pass or fail determined by the visual inspection of the tester. The adhesion tester can pull a test cylinder adhered to the coating and quantitatively measure the tension required for adhesive failure between the coating and the substrate, allowing for the measurement of adhesion strength between them. Additionally, by conducting this test daily, trends toward defects can be identified from changes in adhesion strength values. It accommodates various sizes of dollies, and the rate of tension increase and test duration can be set via a touch panel. It is equipped with a rechargeable battery, making it portable for testing at painting sites.

Company：オールグッド
Price：100,000 yen-500,000 yen

Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sheet valve coining air leak tester

Inspecting the seat surface of the seat valve with a test ball! We will conduct an air leak test.

The "Coining Air Leak Tester for Seat Valves" inspects the seat surface of the seat valve by coining it with a test ball and performs an air leak test. The workpiece and test ball are automatically fed one by one onto the jig table from each parts feeder. The set workpiece is tested after being coined with the test ball. After testing, the test ball is retrieved into a collection box, and the workpieces are transported to either the pass conveyor or the fail collection box based on the pass/fail judgment. 【Features】 ■ Cycle time: 11 seconds per piece ■ The workpiece and test ball are automatically fed one by one onto the jig table ■ The set workpiece is tested after being coined with the test ball ■ Workpieces are transported to either the pass conveyor or the fail collection box *For more details, please refer to the PDF document or feel free to contact us.

Company：山科精器
Price：Other

Other machine tools
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

I Super UV Tester / I Super Xenon Tester

Significantly reduces the reproduction time of natural degradation! An ultra-accelerated weather resistance testing machine that offers excellent performance and high quality.

We would like to introduce our ultra-accelerated weather resistance testing machines, the "I Super UV Tester" and the "I Super Xenon Tester." The "I Super UV Tester" has an astonishing acceleration capability that can replicate 10 years of outdoor exposure in approximately 1000 hours. The "I Super Xenon Tester" features ease of use with adjustable illuminance, in addition to a high correlation with exposure tests. 【Features (partial)】 <I Super UV Tester> - Significantly increased effective irradiation area - Reduced running costs - Improved maintenance, etc. <I Super Xenon Tester> - Compatible with various testing standards - Excellent correlation - Easy operation and monitoring, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：岩崎電気光・環境事業部
Price：Other

Testing Equipment and Devices
Weather resistance test
Environmental Test Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Super Promotion Weather Resistance Testing Machine / I Super UV Tester W262

Reproducing degradation in outdoor exposure at 1/100 of the time of metal halide lamp method and 1/10 of the weather meter time [Ultraviolet, Degradation, Time Reduction, Large Area]

The "I Super UV Tester" is a super-accelerated weathering test machine using a metal halide lamp system developed by our company, a lamp manufacturer, specifically designed to match the optimal wavelengths for promoting degradation. The specially developed lamp enhances the reproducibility of tests. It can replicate 10 years of outdoor exposure in approximately 40 days, achieving a time reduction of about 1/100. Compared to the xenon lamp-based weather meters adopted by various weathering test standards, it allows for a time reduction of 1/10. Therefore, it has many applications not only in research and development but also as a screening test before conducting standard tests with xenon-based weather meters. Additionally, many companies have adopted it for their own inspection standards and quality assurance testing of products. 【Features (partial)】 ■ Significantly increased effective irradiation area ■ Reduced running costs ■ Remote monitoring and operation options available ■ Enhanced operability and visibility with a large 8-inch monitor * The standard model W161 is also available in the lineup. * For more details, please refer to the PDF document or feel free to contact us.

Company：岩崎電気光・環境事業部
Price：Other

Environmental Test Equipment
Weather resistance test
Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leak Tester

Instantly measures airtightness to check for fuel leaks in the engine - leak tester.

The leak tester instantly measures the airtightness to check for any fuel leaks in the engine. 【Setsu Kiden Strengths】 ■ Setsu Kiden provides a consistent service from design to installation. ■ Cost and labor can also be reduced! ■ We can respond flexibly with a wide range of technical skills! ● For more details, please contact us or download the catalog.

Company：摂津機電
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pin penetration testing machine A.P.P. tester

Unlike previous pull-out tests, testing can be conducted with the wall's concrete in its original position. 【NETIS Registration Number: QS-190031-A】

【Features】 ■ Complies with NEXCO Test Method 726 2009 It complies with the NEXCO test method "726 2009" and is used in many field applications. ■ No individual differences in test results Stable penetration force is achieved through air pressure, resulting in no individual differences in the results. Additionally, equipment calibration can be easily verified using a calibration test anvil. ■ Testing possible in situ There are no restrictions on the penetration direction, allowing for testing of concrete sprayed on walls in its original position. ■ Wide range of strength estimation possible By using two types of pins with different penetration resistances, strength estimation is possible in the range of 0.1 to 26 N/m².

Company：エフティーエス
Price：Other

Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Light Scattering Twist Test Shaft Twisting Tester STT Series

"Rapid and reliable optical twist testing" A testing machine that visualizes the twist phenomenon of a shaft (lead structure) using light diffraction.

The 【STT Series】 is a testing machine that visualizes the twisting phenomenon (lead structure) of shafts using light diffraction. It enables rapid and reliable quality control right next to the machining process. Tests can be conducted in seconds, achieving a significant speed increase compared to conventional methods. The lineup includes "STT-NO," which performs direct inspection with an integrated magnifying glass; "STT-NK," which reads test results with a compatible digital camera; and "STT-NV," which reads with a compatible digital camera and conducts dynamic testing on a PC screen.

Company：エフティーエス
Price：Other

Other metal materials
Other machine tools
Other work tools
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leak Tester "KH1200S"

It is a leak tester that conducts pinhole inspection of plastic containers.

The "KH-1200S" is a device for conducting pinhole inspections on plastic containers ranging from 100ml to 5L. Its maximum capacity is 45 containers per minute (varies depending on container shape). The supply air pressure is 0.3MPa, and the inspection air pressure ranges from 0.01MPa to 0.00001MPa. The ease of setup can be appreciated during product changeovers. 【Features】 - Despite being a single head, it has an inspection capacity of over 40 containers per minute. - A revolutionary inspection machine that allows for leak testing, which previously required multiple heads, to be performed simply without complex settings. For more details, please contact us.

Company：アドバンス
Price：Other

Leak Testing Equipment
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

High-performance air leak tester "AKL Series"

Customizable! Simple straight-type pinhole inspection machine for plastic containers.

The "AKL Series" is a pinhole inspection machine for plastic containers. We offer models that pursue inspection capability and accuracy per head, with a simple linear type that can inspect over 100 units per minute. The advantages brought by its simple mechanism can be experienced in the ease of setup for product changeovers. Additionally, if the standard model does not meet your needs, we can provide a customized specification upon consultation. 【Features】 ■ Pursues inspection capability and accuracy per head ■ Models available that can inspect over 100 units per minute ■ Customization is possible upon consultation *For more details, please refer to the PDF document or feel free to contact us.

Company：アドバンス
Price：Other

Leak Testing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Medical Telemetry Tester QRT-400NK

Compact and lightweight yet high-performance! A medical telemetry tester that can be used immediately without a manual.

The "QRT-400NK" is a medical telemetry tester operating in the 400MHz low-power radio band. By simply entering the channel number of the low-power radio band, it automatically displays and determines all items such as spectrum, frequency, electric field strength, and FM frequency deviation on a single screen. With familiar mobile devices like tablets and laptops, it enables high-level measurements comparable to professional measuring instruments. 【Features】 ■ Compact RF unit design ■ Measurement data and spectrum graphs can be saved ■ Launch with just a click on an icon ■ Display measurement items on a single screen ■ Usable immediately without a manual For more details, please refer to the catalog or feel free to contact us.

Company：クアトロプラン
Price：Other

Other electronic measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Water Test Aggregation Reaction Device Jartester "MJS Series"

All exterior parts are made of stainless steel! A jar tester that supports everything from water treatment to testing.

The "MJS Series" from Daido Industrial Co., Ltd. is a water treatment testing device made of stainless steel plates. There are two types: the H type, which has two timers that can automatically switch between rapid stirring and slow stirring, and the T type, which has three timers that can automatically switch between rapid stirring, slow stirring, and rest time. The T type can operate continuously with manual and automatic switching. All models come with a reagent injection device, allowing simultaneous injection of reagents by turning the handle on the side. 【Features】 ■ All exterior parts are made of stainless steel ■ Uses a digital tachometer ■ Two types of lighting available: back lighting and bottom/back lighting ■ Usable for a wide range of applications *For more details, please refer to the catalog. Feel free to contact us with any inquiries.

Company：大同工業所楠根工場
Price：1 million yen-5 million yen

others
Testing Equipment and Devices
Water treatment equipment
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

920MHz band air tester "WT-920"

Connection tests for the LoRaWAN network are possible! You can measure PER and RSSI.

The "WT-920" is a handheld testing device compatible with the specific low-power 920MHz band LoRaWAN for the Japanese market. It can perform connection confirmation tests to existing networks as a LoRaWAN end device and measure the propagation characteristics of specific sections using LoRa modulation on its own. It is highly effective for preliminary investigations in network construction and for identifying causes during malfunctions. 【Features】 ■ Capable of connection testing for LoRaWAN networks ■ Can measure PER (Packet Error Rate) in direct communication with the device ■ Can display a list of RSSI (Received Signal Strength Indicator) ■ Records location information via GPS along with RSSI measurement results ■ Data can be saved to a memory card with a maximum capacity of 2GB *For more details, please refer to the PDF document or feel free to contact us.

Company：日本テクニカル・サービス計測事業部
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MIMO Receiver Tester 'N5106A/N7617B'

MIMO receiver tester capable of verification under real environment conditions.

Our company offers the MIMO receiver tester 'N5106A/N7617B', capable of creating and outputting MIMO signals up to 2x2, as well as testing MIMO receivers. It can play waveform files created with the accompanying software, allowing for receiver testing without a transmitter. Using analog I/Q outputs, testing can begin with the receiver in a baseband-only state. 【Features】 ■ Advanced channel emulation ■ Comprehensive channel correlation settings ■ Creation of WLAN signals *For more details, please download the PDF or feel free to contact us.

Company：公益財団法人　福岡県産業・科学技術振興財団　三次元半導体研究センター
Price：Other

Signal Generator
Other electronic measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exhaust Gas Tester "ZKE"

A simple design that allows for one-touch operation. Cutting-edge digital technology has been integrated into this single unit.

The "ZKE" is a vehicle exhaust gas multi-measuring device that can measure CO and HC as well as CO2, which is a cause of global warming. It features a simple design that allows for one-touch operation. The use of a large LCD monitor enables quick confirmation of measurement values. Additionally, with a compact and highly reliable solid infrared sensor and a Galvanic O2 sensor, it offers high precision and excellent stability, even in the presence of vibrations and impacts, allowing for comfortable operation. 【Features】 ■ Incorporates cutting-edge digital technology into one device ■ Quick confirmation of measurement values thanks to the large LCD monitor ■ Capable of measuring CO2, which contributes to global warming, in addition to CO and HC ■ Equipped with a high-precision solid infrared sensor and Galvanic O2 sensor ■ Displays AFR (Air-Fuel Ratio) and LAMBDA (Lambda Excess Air Ratio) * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.

Company：安全自動車営業企画部　販促企画グループ
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Headlight Tester "HLI-2023"

Supports a wide variety of lamps and enables quick and accurate measurements! Packed with convenient features.

The "HLI-2023" is a headlight tester that achieves fully automatic and rapid measurements. It processes the light distribution patterns of various lamps and instantly displays the irradiation direction and luminous intensity. We also offer the "HLI-223," which, while being a manual device, is equipped with a variety of functions. Please feel free to contact us when you need assistance. 【Features of HLI-2023】 ■ Evolving image processing method ■ Advanced identification functions ■ Excellent operability ■ Various measurement modes *For more details, please refer to the PDF document or feel free to contact us.

Company：安全自動車営業企画部　販促企画グループ
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semiconductor Tester "Automatic DC Tester ATS-3201"

Compact, lightweight, high-speed, and high-performance! Reduces human error and improves productivity.

The "Automatic DC Tester ATS-3201" is a semiconductor tester developed for measuring small signal discrete products. It measures transistors, diodes, and MOS FETs at high speed without using any mercury-containing wet relays. All functions are integrated into the head box size of a general-purpose DC tester, allowing it to be installed in various production layouts without restriction. 【Features】 ○ Mercury-free ○ High-speed measurement of transistors, diodes, and MOS FETs ○ High reliability ○ HOST communication compliant with SEMI standards / Handler and prober connection ○ Lightweight and compact For more details, please contact us or download the catalog.

Company：イーアールディー
Price：Other

Other machine elements
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Example] Cable Tester NCT-100 Simplification of Inspection

We will introduce a case where changing the settings solved the customer's issues!

The "NCT-100" is a cable tester that supports easy operation for inspecting cables and harnesses, capable of conducting continuity and momentary disconnection tests on up to 128 points. "We have a large number of cables to inspect, and it's cumbersome to press the test button for each one." Here, we introduce a case that solves such customer challenges. 【Solution】 ■ Cable inspection can be performed without pressing the test button. ■ By changing the settings, inspection can be done with cable insertion and removal. *For more details, please feel free to contact us.

Company：日本電波本社/工場
Price：Other

cable
Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cable Tester "NCT-100" Function Introduction 3 [Momentary Disconnection Test]

Don't miss it with the momentary interruption test! A cable about to break!

<Problems> - A product that passed the continuity test has been returned as defective. - The cause seems to be a frayed wire. <Solution> In such cases... [Intermittent Test] - Conduct tests by applying [stress] such as twisting and shaking to detect wire breaks that cannot be identified by appearance alone! *Adjustable test time → Can be set in one-second increments!

Company：日本電波本社/工場
Price：100,000 yen-500,000 yen

Harness
Harness
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Cable Tester "NCT-100" Function Introduction 4

Amazing! Reduced working time! Just scan and → inspection starts!

<Problems> - It is cumbersome to operate the switch when starting the inspection or changing the inspection cable. Is there a way to skip the switch operation? <Solution> In such cases... - By using a barcode reader, the cumbersome switch operation can be initiated with just one scan at the shortest!

Company：日本電波本社/工場
Price：100,000 yen-500,000 yen

Harness
Harness
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NEW Electric Inspection Device 'TY-CHECKER Type E' Tester

[2026 Renewal] Choose based on the number of points! High-speed, high-precision inspection tester [Continuity, insulation testing, four-terminal testing, micro-short detection]

The TY-CHECKER "Type E" will be renewed in April 2026! Achieving faster and more precise electrical testing! Furthermore, in these times... it will be launched at a reduced cost! With a compact design that doesn't take up much space, it can be placed on a desk. We have prepared a wide range of options that allow you to choose specifications according to the testing content, such as the number of points, high-precision four-terminal testing, and micro-short testing. It can also be used by connecting to hand presses or jigs you already own. 【Features】 ■ Tester that forms the core of the electrical testing system "TY-CHECKER series" ■ Compact design ■ Abundant options ■ Excellent versatility #CircuitBoardTesting #TestingEquipment #ElectricalTesting #Conductivity #Insulation #ShortCircuit #OpenCircuit #FourTerminal #CostReduction #HighSpeed #HighPrecision

Company：太洋テクノレックス本社　和歌山
Price：Other

Circuit Board Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Simple air tester for the 920MHz band 'WT-920'

Connection tests for the LoRaWAN network are possible! Packet Error Rate (PER) measurements can be performed against this device.

The "WT-920" is a handheld testing device compatible with LoRaWAN in the specific low-power 920MHz band for the Japanese market. It can perform connection confirmation tests to existing networks as a LoRaWAN end device and measure the propagation characteristics of specific sections using LoRa modulation on its own. It is highly effective for preliminary investigations in network construction and for identifying causes during malfunctions. 【Features】 ■ Connection testing for LoRaWAN networks is possible (LoRaWAN device mode) ■ PER (Packet Error Rate) measurement can be performed against this device (PER measurement mode) ■ RSSI (Received Signal Strength Indicator) can be displayed in a list (Simple Spectrum Analyzer mode) In Simple Spectrum Analyzer mode, it also supports SIGFOX and other modulations besides LoRa. ■ GPS location information can be recorded along with RSSI measurement results. ■ Data can be saved to a memory card with a maximum capacity of 2GB, allowing for the creation of area maps on a PC and checking usage rates by channel. *For more details, please refer to the PDF document or feel free to contact us.

Company：大井電気
Price：Other

Other measurement, recording and measuring instruments
Communications
Other network tools
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bolt tester

Post-installed anchor non-destructive testing device

- Easy inspection possible with just a strike - Objective judgment possible using impact force waveforms - High-precision judgment possible compared to conventional sound tests - Data is saved with each strike, making record management easy - NETIS registration number (HK-180001-VE) *Note This does not guarantee the pull-out resistance of post-installed anchors. Accurate judgment may not be possible depending on the condition of the bolts.

Company：ケー・エフ・シー
Price：Other

Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Road surface friction measuring device / DF tester

Measuring the skid resistance value of road surfaces. A compact road surface friction measuring device that is easy to carry, simple to operate, and minimizes individual differences among operators.

The "Road Surface Friction Measurement Device / DF Tester" is a portable dynamic friction measurement device that can be used in narrow spaces, curves, and on slopes. It detects the relative deformation of a measuring disc equipped with a flywheel that rotates via a drive motor and three rubber sliders. It measures the sliding resistance between the rubber sliders and the measuring surface. This product is used not only in Japan but also by various organizations and companies overseas, including research institutions such as universities, road companies, automobile manufacturers, tire manufacturers, airports, and monorails. 【Features】 - Short measurement time, easy operation, and no individual differences among operators - Compact and easy to transport, can be transported in a wagon - Automatic watering through a watering pipe from the water tank (accessory) - Easy comparison with previously measured data using the included software - Power supply can be from a car battery (DC12V) or AC100V using an A/D converter (sold separately) *For more details, please refer to the PDF document or feel free to contact us.

Company：島貿易
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Roken-style mask fitting tester "MT-05U type"

Before starting work, let's check the condition of the equipment in environments where harmful substances or large amounts of dust are present!

The "MT-05U model" comes standard with a testing guide and is a mask fitting tester that allows for simple leakage rate measurements without making holes in the mask. By changing the settings on the fit test mode screen, it can be made compatible with JIS T8150:2021 (for units equipped with JIS T8150:2006). Please use it in industrial workplaces where indoor tasks such as metal arc welding are continuously performed, or in workplaces that manufacture or handle indium compounds. 【Features】 ■ Labor Research Institute style ■ Compliant with Japanese Industrial Standards (JIS) T8150:2021 ■ Allows for simple leakage rate measurements without making holes in the mask *For more details, please refer to the PDF document or feel free to contact us.

Company：三栄化工
Price：Other

Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

MIL-STD-1553 Network Tester "DBT300"

Easily achieve communication tests for 1553 signals! DBT300 Network Tester

The DBT300 Data Bus Tester makes it easy to troubleshoot, characterize, and test MIL-STD-1553B data bus networks. The DBT300 uses a press-to-test switch, a liquid crystal display (LCD), and nine LEDs for pass/fail indication to detect shorts, opens, crossovers, and shield-to-shield shorts in the bus and stubs. *For more details, please refer to the related links. Feel free to contact us for more information.

Company：JFE商事エレクトロニクス電子デバイス営業部
Price：Other

Tester
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DC Tester "431-TT"

Supports large current and high voltage measurements, as well as high-speed and parallel measurements! Flexible and diverse system configurations are possible.

The "431-TT" is a new concept DC tester that inherits the know-how of power device measurement and adopts a V/I source measurement module. It features an open architecture, allowing for flexible and diverse system configurations. It supports high current and high voltage measurements, as well as high-speed and parallel measurements, and includes maintenance functions such as waveform monitoring on the operation screen. 【Features】 ■ VI source measurement module configuration ■ Capable of measuring up to 1.2KV/130A (maximum 2.2KV/200A) ■ High-speed measurement ■ Multi-device testing (testing two DUTs simultaneously, such as 2-in-1 devices) ■ Wafer parallel testing (simultaneous measurement of two chips) *For more details, please refer to the PDF document or feel free to contact us.

Company：テセック
Price：Other

Tester
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DC Tester "471-TT"

Improved cost performance through simultaneous measurement of multiple chips! Measurement of 2KV/20A is possible.

The "471-TT" is a DC tester that achieves a significant reduction in data communication time by adopting LAN technology. By utilizing the measurement techniques accumulated over many years, it enables simultaneous measurement of multiple chips in the wafer measurement process. It also inherits our strengths in high voltage and high current measurement technology. By processing simultaneous measurements of multiple chips, it significantly improves productivity compared to conventional testers. 【Features】 ■ Improved cost performance through simultaneous measurement of multiple chips (8 parallel/16 parallel) ■ Significant reduction in data communication time by adopting LAN technology ■ Reduction in measurement time through accelerated relay switching ■ Stable measurements in parallel measurement, leveraging our measurement technology (Max 2kV/20A) ■ Capability to set voltage/current limits, reducing the load on probe pins ■ Automatically divides and sets the number of chips to be measured simultaneously to be below the pre-set maximum current value (current capacity of the prober chuck) *For more details, please refer to the PDF document or feel free to contact us.

Company：テセック
Price：Other

Tester
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Helium leak tester

Accurately and quickly detect tiny leaks! Yamaha helium leak tester.

The "Helium Leak Tester" is a system that measures helium gas that has leaked into a vacuum chamber using a leak detector, determining pass or fail against a set leakage amount. It is adopted in many automotive parts and home appliance factories, such as aluminum wheels, drums, air conditioners, and fuel tanks, as a high-performance and highly reliable leak testing machine. 【Features】 ■ Accurately detects minute leaks ■ Direct line connection method, short inspection cycle ■ Fail-safe system to eliminate errors ■ Low running costs ■ Easy handling and maintenance *For more details, please refer to the PDF materials or feel free to contact us.

Company：ヤマハファインテック
Price：Other

Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tester Product List and Ranking from 293 Manufacturers, Suppliers and Companies | IPROS GMS

Tester Manufacturer, Suppliers and Company Rankings

Tester Product ranking