We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for Tester.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

Tester Product List and Ranking from 320 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.

Tester Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.

  1. フクダ Tokyo//Testing, Analysis and Measurement
  2. ナック Tokyo//Industrial Electrical Equipment
  3. 太洋テクノレックス 本社　和歌山 Wakayama//Electronic Components and Semiconductors
  4. 4 TAKAYA Corporation Okayama//Industrial Electrical Equipment
  5. 5 コスモ計器 Tokyo//Testing, Analysis and Measurement
Go to Company Ranking

Tester Product ranking

Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.

  1. NEW Electric Inspection Device 'TY-CHECKER Type E' Tester 太洋テクノレックス 本社　和歌山
  2. "Comprehensive Product Guide" "Technical Manual" ／ Fukuda Leak Test フクダ
  3. Universal Bond Tester 4000Plus by Nordson 日精 本社
  4. 4 General-purpose differential pressure air leak tester | FLA-0201 series フクダ
  5. 5 Compact Air Leak Tester | FLZ-0220 series フクダ

Tester Product List

571～600 item / All 1243 items

Displayed results
Direct Pressure Low-Cost Leak Tester 'NLT-130'

Direct Pressure Low-Cost Leak Tester 'NLT-130'

Compact design, master tankless, dedicated machine focused on cost performance leak tester.

The NLT-130 is a direct pressure air leak tester designed with essential functions prioritized for cost-effectiveness. - Recommended for those who want to implement it as cheaply as possible. - Currently conducting all direct pressure air leak tests manually. It features automatic functions from pressurization to measurement and OK/NG judgment after pressing the start button. The displayed value only shows the pressure within the measurement volume (including piping). *No zero reset during measurement transition. 【Features】 ■ Thorough cost performance ■ No difficult adjustments required without a master tank ■ Compact design for easy operation

  • IMG_6141.jpg
  • IMG_6178.jpg
  • IMG_6192トリミング済.jpg
  • IMG_6193トリミング済.jpg
  • Other inspection equipment and devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak test lab that meets various needs.

Leak test lab that meets various needs.

We will assist you in introducing the test line using the appropriate method tailored to your objectives.

We have established a leak test lab to conduct the selection of testing methods, data collection, technical guidance, and training. We invite our customers to experience leak testing and support the introduction of suitable methods to the test line according to their objectives. If you have concerns such as "What type of leak test is appropriate?" or "I am using a leak tester, but it is unstable," please feel free to consult with us. 【Leak Test Lab Equipment】 ■ Leak testers: various types of direct pressure and differential pressure ■ Digital pressure gauges and digital flow meters of various types ■ Data loggers, soap film flow meters, leak generators, etc. *For more details, please download the PDF or feel free to contact us.

  • 様々なニーズに対応するリークテスト・ラボ (2).png
  • 様々なニーズに対応するリークテスト・ラボ (3).png
  • 様々なニーズに対応するリークテスト・ラボ (4).png
  • Other inspection equipment and devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Mixed Signal IC Tester ECOIC-M1

Mixed Signal IC Tester ECOIC-M1

Mixed Signal IC Tester ECOIC-M1

Wide compatibility from analog ICs to mixed-signal ICs! Mixed-Signal IC Tester ECOIC-M1 ■□■Features■□■ ■Target Devices Linear ICs, Mixed-Signal ICs ■Compact - Main body size (mm) approximately 600×770×720 - Main body weight (kg) approximately 80 ■Standard Functions - Matrix 64 pins - Power supply 48V, 2A 4ch - High voltage power supply 48V, 2A 4ch - Digital generation 100MHz 10ch - Digital measurement 100MHz 10ch - Analog measurement test range 300V/1A - Timing measurement 250Msps 4ch - Arbitrary signal generation 100MHz 4ch ■Graphical Test Program - Measurement control functions created with the graphical tool LabVIEW ■PXI Standard - High-performance measurement and automation platform ■Interfaces - GPIB, RS232C, USB, TCP/IP - Handler control - Prober control - Temperature chamber control - Production line control

  • Other semiconductors
  • Semiconductor inspection/test equipment
  • Testing Equipment and Devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Meter Panel Automatic Evaluation System ECOIC-E1 Tester

Meter Panel Automatic Evaluation System ECOIC-E1 Tester

Easy operation with a test setup application featuring automatic position detection! Meter panel automatic evaluation system.

■□■Features■□■ ◇ HIL Simulation Comprehensive Evaluation ◇ Meter Panel Composite Evaluation ◇ Individual Meter Evaluation ■ Easy setup for meter panel testing machine ・ Automatic position correction function available ■ High measurement accuracy ・ Adoption of high-performance PXI measurement modules ■ Abundant testing functions ・ Customizable basic functions provided by LabVIEW ■ Driving patterns can be created as envisioned ・ Created by combining functions using TestStand

  • Automotive catalyst evaluation test equipment
  • Semiconductor inspection/test equipment
  • Communications
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Development Case] Development of a Tester Compatible with 3V Power Supply ICs

[Development Case] Development of a Tester Compatible with 3V Power Supply ICs

Peritech Corporation [Development Case] Development of a Tester Compatible with 3V Power Supply ICs

[Development Case] Development of a Tester Compatible with 3V Power Supply ICs

  • Other semiconductors
  • Circuit board design and manufacturing
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction to RFID Testers - Features and Case Studies (Presentation)

Introduction to RFID Testers - Features and Case Studies (Presentation)

Evaluation of RFID tags and readers in HF, UHF, and microwave bands!

Introducing Peritec's RFID Tester. - Introduction to Peritec - Introduction to Peritec's RFID Tester - RFID testing for various applications using the RFID Tester - RFID services and products offered by Peritec

  • Other electronic measuring instruments
  • IC tag
  • Circuit Board Inspection Equipment
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Development Case] Development of an RF-IC Tester Compatible with Multiple Communication Devices

[Development Case] Development of an RF-IC Tester Compatible with Multiple Communication Devices

Development of an RF-IC tester compatible with multiple communication devices using PXI-RF modules.

Today's communication devices have started to use multiple communication standards within a single product. For example, devices like smartphones are equipped with various protocols such as W-CDMA, GPS, Bluetooth, WiFi, and NFC, with a wide range of frequency bands and inspection items. Additionally, due to the decreasing prices of communication equipment and the shortening of product life cycles, there is a need to reduce the costs of RF testing for a single communication device test. Therefore, Peritec Co., Ltd. has begun the development of an RF-IC tester that supports multiple communication devices, aiming for a price point of less than one-third that of general-purpose RF-IC testers.

  • Tester
  • Other electronic measuring instruments
  • EMC Testing
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NFC Forum Compliant NFC Tester - Introducing Software Features Video -

NFC Forum Compliant NFC Tester - Introducing Software Features Video -

Automatic measurement of parameters accurately from analog waveforms.

The NFC tester manufactured by VI Service Network is a testing and measurement solution system for NFC analog testing. This system utilizes a vector signal generator and vector signal analyzer from NI, along with a programmable FPGA-equipped vector signal transceiver with digital input and output, making it a flexible system capable of supporting the latest NFC standards.

  • antenna
  • IC tag
  • IC tag reader/writer
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Headlight tester

Headlight tester

We also offer a type that achieves easy, accurate, and speedy automatic lamp alignment and measurement!

We would like to introduce the "Headlight Tester" that we handle. We offer a fully automatic "Image Processing Automatic Type" that measures from the lamp facing to the end of measurement, as well as a "Image Processing Manual Type" that allows for switching the size of the light distribution display during measurement and adjustment. Additionally, we have an "Image Processing Visual Type" equipped with a brightness display function for the upper and lower positions of the cut line, and a "Screen Manual Type" that features easy and simple operation with a dial. 【Product Lineup】 ■ Image Processing Automatic Type ■ Image Processing Manual Type ■ Image Processing Visual Type ■ Screen Manual Type *For more details, please refer to the PDF document or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Wheel Alignment Tester "Jumbo 3D SUPER"

Wheel Alignment Tester "Jumbo 3D SUPER"

Speedy measurements with a 3D high-performance camera! Equipped with a convenient sub-monitor for undercarriage adjustments.

We would like to introduce our wheel alignment tester, the 'Jumbo 3D SUPER.' It enables alignment measurement for passenger cars, buses, trailers, and multi-axle vehicles in just 3 minutes. The setup is simple—just attach the targets to the wheels. Please feel free to contact us if you need assistance. 【Features】 ■ Speedy measurement with a high-performance 3D camera ■ Easy setup by simply attaching the targets to the wheels ■ Equipped with a sub-monitor for convenience during undercarriage adjustments *For more details, please refer to the related links or feel free to contact us.

  • Other measurement, recording and measuring instruments
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Information] Cap seal, regarding He leak test

[Information] Cap seal, regarding He leak test

Introducing discharge images, melting, and conditions for He leak tests!

This document introduces cap seals and He leak tests. It includes images of the operation of cap seals, as well as images related to the He leak test. Additionally, the significance of gross leak tests is also discussed. Please take a moment to read it. 【Contents】 ■ Cap seal operation images ■ Discharge images and melting ■ He leak test images ■ Conditions for He leak tests *For more details, please refer to the PDF document or feel free to contact us.

  • others
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Air Leak Tester (6ch)

Air Leak Tester (6ch)

Air Leak Tester (6ch)

This is a 6-channel air leak tester. Quartz oscillators and SAW filters, which are essential for mobile phones. We offer various solutions for the automation of the production process. ■□■□■□■□■□■□■□■□■□■□■□■□ ＝＝＝＝＝Please contact us for more details＝＝＝＝＝

  • Flow Meter
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
In-circuit test flying probe tester FA1240

In-circuit test flying probe tester FA1240

An in-circuit tester that drastically reduces running costs and data creation time by eliminating fixtures, with a defect viewer that indicates defective areas like image inspection.

A flying probe type in-circuit tester that does not require fixture manufacturing reduces pseudo-errors caused by poor contact and improves one-pass rates. - It is a high-speed, high-precision, and highly reliable inspection machine suitable for small-lot, multi-variety testing of mounted circuit boards. With its four-terminal measurement capability, it can detect not only lifted IC leads but also pseudo-contact detection of electrically conductive connections. - Furthermore, it enables active testing of FETs, relays, and three-terminal regulators, which were difficult to test with conventional methods. Optional tests allow for simple function measurements, boundary scan measurements, and frequency measurements of crystal oscillators.

  • Circuit Board Inspection Equipment
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
LAN cable high tester "3665"

LAN cable high tester "3665"

Lay network cables with this one device! Simple operation: connect the cables and press the TEST button.

The "3665" is a LAN cable high tester that simultaneously checks wire map, direction, and cable length, providing a consolidated display of measurement results at a glance. With the wire map, it is possible to confirm the wiring after installation and check for break points. The measurement results [OK/NG] are easily identifiable. Additionally, we offer up to 21 terminators (including options). This is convenient for verifying the connection destinations of multiple cables. 【Features】 ■ Shielded support ■ CAT6 support ■ Wire map: reliably detects split pairs and checks wiring conditions ■ Cable length: improved measurement accuracy to identify break/short circuit locations ■ Direction: identifies connection destinations for up to 21 cables *For more details, please refer to the PDF document or feel free to contact us.

  • Tester
  • Testing Equipment and Devices
  • Other inspection equipment and devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Multi-tester for food packaging 'EXOS'

Multi-tester for food packaging 'EXOS'

For specifying expiration dates and deadlines! Gas concentration, leak tests, and seal strength tests can be measured simultaneously with a single sample. [*Video available*]

The EXOS by Aneolia is a multi-tester for food packaging. It allows for gas concentration, leak tests, and seal strength tests to be conducted on the same package, ensuring that all tests are measurements taken in the package's initial state, which is useful for determining expiration dates and deadlines. 【Features】 ■ Capable of testing gas concentration, leak tests, and seal strength ■ All tests can be measured simultaneously on a single sample ■ Useful for determining expiration dates and deadlines *For more details about the product, please download the catalog from the link below.

  • Leak Testing Equipment
  • Testing Equipment and Devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Differential Pressure Air Leak Tester "F620"

Differential Pressure Air Leak Tester "F620"

【Super Compact Size】Introducing the latest leak test technology!

Based on feedback from over 5,000 customers worldwide through the sales achievement of 100,000 units, we have completed the new product. The optimized modules and interfaces support further improvements in quality control. The F620, inheriting the latest leak testing technology and know-how, provides the highest precision leak testing. 【Features】 ○ Ultra-compact size ○ High cost performance ○ Color graphic display For more details, please contact us or download the catalog.

  • Leak Testing Equipment
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Leak tester that halves the measurement time! "F620"

Leak tester that halves the measurement time! "F620"

A leak tester that reduces measurement time by up to half!! The highest precision leak testing product that inherits the know-how cultivated from the sales record of 100,000 units!

We often hear from users of leak testers (leak testing devices) about their concerns, such as "I want to shorten the measurement time..." and "If I try to speed up the measurement time of the leak tester, it ends up increasing the cost..." The differential pressure air leak tester "F620" is a high-precision leak testing product that inherits the technology and know-how cultivated through the sale of 100,000 units. *Demo units are available free of charge. 【Features】 ■ Measurement time reduced by up to half! ■ High cost performance ■ Color graphic display *If you would like a demo unit, please indicate "Request for demo unit" in the inquiry form. For more details, please request documentation or view the PDF data available for download.

  • Other measurement, recording and measuring instruments
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Differential Pressure Air Leak Tester 'F620LV'

Differential Pressure Air Leak Tester 'F620LV'

High-capacity work compatible model! Differential pressure air leak tester equipped with noise-canceling function.

The F620LV is a differential pressure air leak tester equipped with groundbreaking new technology using a new high-sensitivity pressure sensor, designed for large-capacity workpieces (up to 200L). It eliminates the influence of external factors in the testing environment, enabling faster and more accurate leak tests. Utilizing the DNC function, it is capable of detecting pressure drops (fluctuations) of less than 0.1 Pa/sec. It is suitable for workpieces with very large volumes, such as tanks and EV batteries, and has a proven track record of numerous implementations for inspecting EV battery packs. 【Features】 ■ Model compatible with large-capacity workpieces ■ Equipped with high-sensitivity pressure sensor ■ Noise-canceling function included ■ IoT compatible (various fieldbus communications) ▽ You can watch a functional introduction video on the following page: https://www.youtube.com/watch?v=TyuPKPaY0aQ *For more details, please refer to the PDF document or feel free to contact us.

  • Tester
  • Sensors
  • Sensors
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
For detecting short circuits in flat angle lines! Rare short tester.

For detecting short circuits in flat angle lines! Rare short tester.

It is a device that detects whether a rare short circuit has occurred due to damage to the insulation between copper wires.

This is a device that detects whether a rare short circuit has occurred due to insulation damage between copper wires by applying voltage between copper wires wound with a combination of different types of insulated copper wire. By simply applying voltage to the device, it enables the detection of short circuits in flat rectangular wires. It contributes to reducing testing time, cutting costs, and predicting short circuit accidents in advance. *Flat rectangular wires are mainly used in oil-filled large transformers and switchgear. Our rare tester is a device that tests the insulation/short circuit status between multiple physically separated flat rectangular wires. (It cannot test the insulation/short circuit of a single coil winding.)

  • Testing Equipment and Devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Pulse Pattern Generator Bit Error Tester

Pulse Pattern Generator Bit Error Tester

It is a high-density multi-channel pulse pattern generator and bit error detector. It is ideal for design and performance evaluation in optical transceivers and optoelectronic components.

High-Density Multi-Channel Pulse Pattern Generator and Bit Error Tester Generates pulse patterns in a high-density and multi-channel manner for the evaluation, testing, and design of optical electronic components and optical transceivers. It is also capable of bit error detection. By combining electrical signal testing equipment with optical testing equipment, efficient end-to-end verification of transceivers in a manufacturing environment can be achieved. ● Bit Error Rate Tester BERT 1000 Series A 4-channel pulse pattern generator (PPG) and error detector for optical transceivers and optoelectronic components designed for characterization and manufacturing at data rates of up to 14.5 Gb/s. *For more details, please contact us. ● PAM4 Bit Error Rate Tester BERT 1102 Series An 8-channel PAM4 and NRZ pulse pattern generator (PPG) and error detector. It can be used for the design, characterization, and manufacturing of optical transceivers and optoelectronic components at a symbol rate of up to 29 Gbaud.

  • Other electric meters
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fiber Coater & Proof Tester

Fiber Coater & Proof Tester

This is a device for applying and curing UV-curable resin for the protection of fiber fusion areas, and for reconstructing the coating. It uses a silicone resin mold.

It has the flexibility to easily change the re-coating materials and fiber coating sizes. The silicone mold accommodates coating sizes from 80 to 900 μm, and custom sizes are also available (coating sizes over 900 μm can be accommodated as well). The re-coating length ranges from 34 to 100 mm. *For more details, please contact us.*

  • Other processing machines
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Evaluation of metal leaching from pharmaceuticals and food products.

Evaluation of metal leaching from pharmaceuticals and food products.

We will measure the elution amount under conditions suitable for the intended use.

The Importance of Metal Leaching Tests for Resin Materials ● Medical Devices and Materials Since these are implanted in the body or come into contact with biological systems for relatively long periods, it is necessary to not only meet standards corresponding to methods such as the "Pharmaceuticals and Medical Devices Agency's Plastic Pharmaceutical Container Test," but also to conduct leaching tests appropriate to the usage environment to identify leached elements and evaluate safety. ● Equipment and Packaging Used in Food Manufacturing and Processing Due to the potential for chemical substances leaching from these materials to contaminate food, it is necessary to confirm the presence or absence of metal components leaching using methods such as the "Standards for Food, Additives, etc. (Ministry of Health and Welfare Notification No. 370 of 1959)" and the "Standards for Resin Equipment and Packaging Containers (Ministry of Health, Labour and Welfare Notification No. 201)."

  • Ingredient analysis
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Helium leak tester

Helium leak tester

Helium leak tester

In products where airtightness is emphasized, unlike conventional immersion and differential pressure methods, high-precision leak testing and objective inspection data can be output, contributing to a higher reliability in quality assurance.

  • Leak Testing Equipment
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Impact Tester for Drop Weight Durability (Impact Test)

Impact Tester for Drop Weight Durability (Impact Test)

We will check for cracks and peeling of the paint film when the weight is dropped and deformed.

We will check for cracks and peeling of the paint film when a weight is dropped and deformed. We have prepared kits that comply with each standard. Each kit can be easily assembled. 【Applicable Standards】 ○ISO 6272:1993, ISO 6272-1, ISO 6272-2, JIS K 5600-5-3:1999 ○ASTM D 2794, ASTM D 5420, AS/NZS 1580.406.1, 　BS 6496:1984, EN 12206-1:2004, EN 13523-5 For more details, please contact us or download the catalog.

  • Testing Equipment and Devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Cross Cut Guide & Fully Automatic Adhesion Tester AT-A

Cross Cut Guide & Fully Automatic Adhesion Tester AT-A

Crosscut Guide: Achieves easy, accurate, and reliable testing.

We will reliably guide you to 'make cuts perpendicular to the coating film,' which is the lifeline of the cross-cut guide test. 【Reference Standards】 ○JIS K5400 ○JIS K5600 D0202 General rules for coating films on automotive parts Please check the link for more details.

  • Testing Equipment and Devices
  • Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to Tester

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.