Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Jan 14, 2026～Feb 10, 2026
This ranking is based on the number of page views on our site.
601～630 item / All 1240 items
Helium leak tester
In products where airtightness is emphasized, unlike conventional immersion and differential pressure methods, high-precision leak testing and objective inspection data can be output, contributing to a higher reliability in quality assurance.
We will check for cracks and peeling of the paint film when the weight is dropped and deformed.
We will check for cracks and peeling of the paint film when a weight is dropped and deformed. We have prepared kits that comply with each standard. Each kit can be easily assembled. 【Applicable Standards】 ○ISO 6272:1993, ISO 6272-1, ISO 6272-2, JIS K 5600-5-3:1999 ○ASTM D 2794, ASTM D 5420, AS/NZS 1580.406.1, BS 6496:1984, EN 12206-1:2004, EN 13523-5 For more details, please contact us or download the catalog.
Crosscut Guide: Achieves easy, accurate, and reliable testing.
We will reliably guide you to 'make cuts perpendicular to the coating film,' which is the lifeline of the cross-cut guide test. 【Reference Standards】 ○JIS K5400 ○JIS K5600 D0202 General rules for coating films on automotive parts Please check the link for more details.
A device to check the fit of a mask on the face! Daily checks with a fit check.
We would like to introduce our "Mask Fitting Tester Series." This measuring device measures the concentration of dust particles on both the outside and inside of the mask, and from the results, it calculates the dust penetration rate (leakage rate (%)) into the mask or the fit factor indicating the cleanliness inside the mask. We offer two models: the "MT-11D," which uses a Condensation Nuclei Counter (CNC), and the "MT-05U," which employs a light scattering method (OPC). 【Features of MT-11D】 - Uses high-purity isopropyl alcohol (IPA) or ethanol for measurements. - Capable of conducting quantitative fit tests and shortened quantitative fit tests according to JIS T8150:2021 standards, and compliant with ISO and US OSHA standards. - Allows registration of subject and mask information independently on the main unit, in addition to communication software. - Screen operation can be performed using commercially available mice, in addition to the included touch pen. - Equipped with a classifier (DMA), making it suitable for measuring disposable dust masks DS2 and N95 masks. *For more details, please download the PDF or feel free to contact us.
LAN packet tester that can be connected and used with the USB port of a laptop.
This is a LAN analyzer that connects to a PC via USB 2.0. It features a TAP mode that captures full-duplex data of 10/100BASE-TX and outputs it to the PC at a high-speed transfer rate of 480 Mbps through USB 2.0, as well as a Packet Generator (PG) mode that can output test packets at a maximum line rate of 100 Mbps. When combined with a laptop, it allows for easy LAN measurement anywhere.
![[Case Study] Removing corrosive gases occurring in the control room.](https://image.mono.ipros.com/public/product/image/e77/2000196205/IPROS5819048164099931613.jpg?w=280&h=280)
Remove the corrosive gas occurring in the control room and achieve stable operation.
At the pulp dissolving facility of the paper mill, corrosive gases were generated and flowed into the adjacent machine control room, causing corrosion of the control boards and resulting in frequent emergency stops of the machines. Issues: 1. The machine building, including the dissolving equipment, is maintained at positive pressure, causing the generated corrosive gases to flow into and fill the adjacent control room. 2. Corrosive gases such as sulfur dioxide and hydrogen sulfide are being produced, but the exact composition and concentration of the gases are unknown. 3. Due to the inability to accurately determine the gas composition, effective countermeasures cannot be implemented.
We will manufacture easy-to-use, leak-proof one-touch airtight inspection couplers starting from small lots!
1. It is a leak testing device that can be connected with one touch. 2. We design and manufacture custom products tailored to the work shape and inspection conditions! 3. We can produce from small lots!
Original one-touch airtight inspection coupler
Features: 1. Ball lock type that holds the workpiece's outer circumference with a ball integrated inside the coupler. 2. Easily removable by gripping and pulling the sleeve. 3. The packing presses against the workpiece's end face to create a seal.
Custom One-Touch Coupler
Features 1. Insert the workpiece into the coupler up to the base and attach it to the holder. Slide the cover and secure it with the butterfly screw on the back side. 2. By covering with the holder, the workpiece can be secured without being damaged.
Custom One-Touch Coupler
Features 1. Easy connection by simply pushing the workpiece in. 2. Easily detachable by grabbing the sleeve and pulling it towards you. 3. The ratchet inside the coupler distributes pressure, preventing dents on the workpiece.
Custom One-Touch Coupler
Features 1. It is a one-touch coupler specifically for shrink tubes. 2. The four resin claws securely lock in place just by pushing it into the workpiece. 3. It can be easily removed by pushing the sleeve towards the shrink tube side. 4. The structure ensures that the packing closely adheres to the end face of the shrink tube for sealing.
Custom One-Touch Coupler
Features 1. It is a clip joint that grips the workpiece from the outside. 2. It connects by opening the clip and pushing it in. 3. The clip securely locks the protrusions of the workpiece. 4. It seals the inner circumference of the workpiece with an O-ring.
Custom One-Touch Coupler
Features 1. A coupler that connects to female-type workpieces. 2. Fixed by opening the ratchet and pushing it in. 3. Seals the inner circumference of the workpiece with an O-ring.
Custom One-Touch Coupler
Features 1. It has a structure that seals the workpiece in two places simultaneously (two claws move in parallel to lock the special male workpiece). 2. The workpiece can be attached and detached by moving two plates up and down. There are two holes in the coupler, allowing for simultaneous sealing. 3. There is a filling area at the back where fluid can flow.
Custom One-Touch Coupler
Features 1. A structure that seals the workpiece at two locations simultaneously (a structure where two claws move in parallel to lock the special male connector). 2. A structure that seals with an O-ring on the coupler side for the 2-pin connector B. 3. The specification with a swivel joint allows for easy attachment and detachment even if the piping position changes.
Custom One-Touch Coupler
Features 1. A coupler that completes sealing and locking simply by screwing in the screw, without the need for sealing tape that could cause foreign matter contamination. 2. Locking is completed as the packing comes into contact with the end face of the screw just by screwing it in. The structure enhances adhesion under internal pressure. 3. Easy to attach and detach without tools. (A hand-tightening structure that does not require tools or sealing tape.)
One-touch male thread joint
Features 1. A coupler that connects with a one-touch to the male threaded workpiece. 2. It locks and seals by pushing the end into the workpiece. 3. The packing adheres closely to the threaded end face to create a seal. 4. Equipped with a tightening function, allowing for emergency disconnection or additional tightening.
Custom One-Touch Coupler
Features 1. The claws close and lock simply by pushing into the workpiece. 2. Seals the inner circumference of the workpiece with an O-ring. 3. Easily removable by pulling the sleeve.
Custom One-Touch Coupler
Features 1. It has a structure that seals and locks through the friction between the workpiece and the rubber. 2. By applying clamp air, the packing contracts and holds the workpiece. When the clamp air is released, the packing opens and the workpiece can be removed. 3. A structure that seals the outer peripheral side of a workpiece where end-face sealing is difficult (air-driven).
Safe! Speedy! Simultaneously measure voltage and current without contact.
The T6-1000 electrical tester uses Fluke's proprietary technology, allowing you to measure AC voltage, current, and frequency between the ground and the target cable simply by clamping it. - Additionally, simultaneous non-contact measurements are possible! - The roles of a clamp and tester are combined into this one device!
Display voltage and current on one screen.
The T6-1000 PRO electric tester is equipped with an open-head fork, allowing it to measure voltages/currents up to 1000 V AC and 200 A AC without making contact with the test leads. By using the included heavy-duty alligator clip to ground the black lead and passing the wire through the open-head fork, you can simultaneously check both voltage and current. It can handle a permissible current value of 200 A and 1000 V AC, and is compatible with wires up to AWG 4/0 (120 mm²). It can be used while wearing gloves, transforming the working environment. - Additionally, current can also be measured non-contact simultaneously! - The roles of clamp and tester are combined in this one device!
It is a non-destructive leak tester!!
By adopting the air inspection method, clean, reproducible, and stable leak testing can be easily performed!
Fully Automatic Package Leak Tester
This is an inspection device designed to prevent critical issues such as internal product decay, mold growth, and deterioration caused by pinholes and seal defects in food and pharmaceutical products.
Package Leak Tester - Gas Analysis Type
Even with a minimal leak, the GLT-Knight gas leak tester, developed under conditions that allow for 100% inspection simply by passing through the detection section, can perform inspections.
The inspection is just a push of a button!
This product is a non-destructive portable package leak tester that replaces methods such as submersion checks, penetration liquid checks, and visual inspections. As long as there is a power supply (AC100V), it can be easily transported to any location for inspection. It is a compact leak tester that is ideal for quality control rooms, as well as for sampling inspections on production lines and in receiving inspection rooms. 【Features】 ■ Simple design ■ Compact & stylish ■ Non-destructive *For more details, please refer to the catalog or feel free to contact us.
In-circuit tester
We have numerous achievements with in-circuit testers, function testers, bare board testers, and more. (Various inline types available)
Substrate inspection equipment and fixtures (tester)
This is a multimeter that has added a simple function feature to the in-circuit test function.
Digital torque tester
Internal converter included: For 0.2 to 10 Nm Basic unit for external converter connection *Two types are available. M1206-90-9002N M1206-90-9003N ◆◇◆Additional Options◆◇◆ ● Torque converter Connects to the basic unit of the torque tester via cable Accuracy: 1% of displayed value (at 20-100% of maximum scale) ● Adapter plate 230×170×5mm (made of stainless steel) A plate for easily securing the torque tester to a workbench. ● Cable (1.5m) Used to connect the torque converter to the basic unit of the torque tester. ◆◇◆For more details, please request documentation or contact us◆◇◆
Never miss any wiring errors! Achieve easy, reliable, and speedy measurements.
This product is a measuring instrument capable of checking miswiring of grounded outlets. ● It can determine miswiring of live wires between N-E (Neutral-Earth), which was previously difficult. ● It measures a current (approximately 10 mA) that does not trip a leakage breaker of 30 mA or more, even with N-E miswiring. ● Normal/miswired conditions are indicated by LED (green/red) lamps and a buzzer. ● An LCD display clearly shows the miswiring situation at a glance. ● Voltage measurement (between L-N) and grounding resistance measurement (between N-E). ● The LCD backlight automatically turns on with a light sensor, supporting measurements in dark places. ● The included conversion adapter allows compatibility with 3-prong/2-prong outlets.
