Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Apr 15, 2026～May 12, 2026
This ranking is based on the number of page views on our site.
631～660 item / All 1243 items
A tester for fine diameter electrodes that supports a wide range of applications. It is a convenient device with automatic single-point calibration. Due to the fine diameter of the electrodes, the range of applications is also expanded.
●Wide applications with fine diameter electrodes ●Automatic single-point calibration type
We have prepared two models to match the measurement range and display units.
We offer two models to match the measurement range and display units. The MF2DT5-98311NH measures EC: 0 to 3999 μS/cm (TDS: 0 to 2000 mg/L), while the MF2DT6-98312NH measures EC: 0.00 to 20.00 mS/cm (TDS: 0.00 to 10.00 g/L). Both models allow for electrode replacement.
Digital Torque Tester (for Manual Torque Drivers and Wrenches) / Model Number M428TRQ-IP05S
The M428TRQ-IP05S series of various torque tools has become more user-friendly and high-performance. It works in conjunction with PCs and PLCs to manage torque measurement more advancedly. Management of manual torque drivers and wrenches, management of automatic and semi-automatic tools, and inspection management of tightening and loosening torque for screws.
Digital Torque Tester (for managing electric torque drivers and manual torque drivers) / Model number M428TE-80CNS
A new member has been born in the torque tester for more advanced management of electric and manual torque drivers.
Torque Tester 2.0 ~ 500.0mN-m (1m cable) / Model number M428TRO-IP05-L1-C-J1S
It has become more user-friendly and high-performance through the management of various torque drivers and wrenches.
Eliminate backtracking in operations with the measurement record guide. Just follow the voice guide to complete measurement, recording, and data organization.
■Efficient deterioration diagnosis of UPS and lead-acid batteries with measurement record voice guidance ●Measurement records with navigation voice guidance ●Efficient data management profile ●Fastest measurement to record in 2 seconds 1: Accurate deterioration diagnosis of lead-acid batteries using proprietary technology This is a standard device that supports the deterioration diagnosis of UPS and lead-acid batteries. By measuring the internal resistance and voltage of the battery using the impedance method, diagnosis can be performed while the battery remains connected to the device in an uninterrupted state. Even in environments where noise occurs, accurate measurements can be made thanks to proprietary noise reduction technology. 2: Measurement guidance and easy data management with the latest app When linked with a dedicated mobile terminal app, the next battery number to be measured is announced via voice guidance. This helps prevent measurement errors. Additionally, if the location information of the measurement site and the battery number are set in advance as profile information, they can be saved in association with measurement data and diagnosis results. Data management remains easy even after numerous battery diagnoses.
Manual hold and automatic bold for fixed display of set values. Calibration and adjustment can be performed on-site using standard oil.
By connecting to a mobile app, the degradation level of frying oil is quantified digitally using TPM (polar compounds). A threshold is set, and the quality of the oil is clearly displayed with a three-color alarm display. It is washable with running water (dustproof and waterproof: IP65).
Torque waveform and equipped with smart communication.
You can check the torque of various tools such as electric screwdrivers, torque drivers, and torque wrenches with high precision. It makes the collection and analysis of measurement data easy.
The torque measuring device is the world standard.
In 1970, at a time when the concept of torque management did not exist, we developed the world's first industrial electric screwdriver capable of precise torque control using current control with a dial. In 1977, we introduced an auto-clutch driver that automatically controls accurate torque, achieving technological innovation. The following year, we began developing torque measuring instruments in pursuit of improved screw fastening quality management. The mechanism of the FIDAPTER was developed by us, alleviating the effects of inertia during torque measurement with clutch-type electric screwdrivers, enabling the detection of accurate torque values. Standards for screw fastening quality management were established, leading to new innovations. Today, torque measuring instruments are used in manufacturing sites in over 90 countries worldwide.
Non-contact AC voltage detector with a "wide mode" feature capable of detecting low voltages of approximately 12V.
- Alerts you to the voltage detection status with sound and LED. - Equipped with convenient LED lights at the probe tip and the bottom of the product for use in dark places. - Complies with IP67 waterproof and dustproof standards, making it suitable for harsh environments such as sudden rain, immersion, and dust. - Enhanced shock resistance with a 2m drop resistance.
Quantitative confirmation of mask wearing status. By checking the wearing, we prevent exposure accidents in advance.
In mask selection, no matter how high-performance a mask is, if it does not fit snugly against the face, a significant amount of air that does not pass through the filter will be inhaled through the gaps. Additionally, it is important to check daily whether the mask is being worn correctly, and in the United States, mask fit testing is mandatory. This product is a mask fit tester that measures the dust concentration on the outside and inside of the mask during wear, and calculates the leakage rate of dust into the mask (in percentage) based on the results.
Prevent exposure accidents with fit testing! Equipped with communication functions including USB, Ethernet, and Wi-Fi.
The "AccuFIT9000 PRO" is a product that measures the particle concentration inside and outside the mask while it is worn, calculates the fit factor, and determines the fit status. It features an easy-to-read, full-color touchscreen and complies with fit testing for standard full masks and half masks. The communication functions include USB, Ethernet, and Wi-Fi, allowing operation of up to four units per PC. 【Features】 ■ Quantitative confirmation of mask fit status ■ Prevention of exposure incidents through fit testing ■ Compliance with fit testing for standard full masks and half masks ■ Easy-to-read, full-color touchscreen ■ Operable both standalone and via PC *For more details, please refer to the PDF document or feel free to contact us.
Measuring flash light intensity for smartphones, cameras, etc.! Compatible with xenon, LED flash, and LED continuous light! [Demo units available for loan]
The "DEF-8520" is a flash tester that can accurately measure xenon flash, LED flash, and LED continuous light. It has added functions for interval measurement and interval cancellation. Sensitivity switching between LED and xenon is possible. 【Features】 ○ Compatible with xenon flash, LED flash, and LED continuous light ○ Added functions for interval measurement and interval cancellation ○ Sensitivity switching (LED/Xe) ○ Measurement items ・Exposure amount ［lxs］ ・Guide number ［Gno.］ ・F number ［Fno.］ ・Aperture index ［AV］ ・Exposure amount EV error ［ΔEV］ ・Maximum illuminance ［klx］ ・Flash duration ［ms］ ◇ Measurement of LED flash light quantity from camera-equipped mobile phones ◇ Other application examples ・Measurement of flash light from aviation obstruction light groups ・Measurement of flash light from medical endoscope cameras ・Measurement of UV flash light for sterilization ● For more details, please contact us or refer to the catalog. * For high-resolution types, please consult us.
A light intensity variation measuring device capable of evaluating and inspecting the light distribution of a light source! The nine light-receiving sections can be installed at any position! It also supports low illumination and LED constant light!
The "DEF-9E" is a flash photometric tester that measures the light distribution of flash light. It enables the measurement and evaluation of brightness and illuminance uniformity for various lights. Additionally, it can accurately measure from a guide number of 0.078. The distribution of peripheral light intensity relative to the center is displayed in % and ΔEV. The nine light receiving points can be mounted at any position on a metal plate using magnets. The measurement range can be selected. *Up to 25 points can be measured. This measuring instrument is compatible with various applications. We can develop and propose solutions tailored to customer needs, such as illuminance uniformity measurement for LCD projectors. 【Features】 ○ Illuminance meter (illuminance uniformity tester) ○ Measurement accuracy: ±0.1EV ○ Low illuminance compatible ○ Measurable objects: - Xenon (Xe) flash - LED flash - LED constant light ○ Accurate measurement from a guide number of 0.1 ○ Displays the distribution of peripheral light intensity relative to the center in % and ΔEV ○ Light receiving points can be mounted in any location ○ Nine measurement points (up to 25 points possible) ○ Measurement range is selectable ● For more details, please contact us or refer to the catalog.
The light distribution of the flash can be measured with 65 light-receiving units arranged in a cross shape! The light distribution characteristics graph can be displayed on the PC screen in all four directions with a single flash!
The "DEF-9300" is a flash photometric tester that measures the light distribution characteristics of flash light using 65 light-receiving points arranged in a cross pattern (up, down, left, right). It enables the measurement and evaluation of the light output of strobe flashes. With a single flash, it displays the light distribution characteristic graphs for up, down, left, and right on a computer screen. It consists of a computer and a control unit. 【Features】 ○ Measurement accuracy: ±0.05EV ○ 65 light-receiving points arranged in a cross pattern ○ Capable of measuring the light distribution characteristics of flash light ○ Displays the light distribution characteristic graphs for up, down, left, and right on a computer screen with a single flash ● For more details, please contact us or refer to the catalog.
25 measurement points arranged in an arch shape! Display the flash light distribution and the vertical light distribution characteristics graph in a single measurement!
The "DEF-9900" is a flash light distribution tester that measures the light distribution characteristics of strobe flash light using 25 light receiving points (measurement points) arranged in an arch shape. It enables the measurement and evaluation of all types of light quantities, including brightness and illuminance. With a single flash, it displays the light distribution characteristic graphs on a computer screen for both vertical and horizontal orientations. It consists of a computer and a control unit. It is also capable of measuring LED constant light. * The number of light receiving points can be specified up to a maximum of 73. Please consult us. * Automatic pan-tilt head (optional) 【Features】 ○ Compatible with Xenon flash, LED flash, and LED constant light ○ Measures the light distribution characteristics of strobe flash ○ 25 light receiving points arranged in an arch ○ Measurement points: 25 points measured * Up to 73 points possible ○ Measurement accuracy: ±0.1EV ○ Composed of a computer and control unit ○ Displays the light distribution characteristic graphs on a computer screen for both vertical and horizontal orientations with a single flash ● For more details, please contact us or refer to the catalog.
★Patented Product★ Compatible with 1/8000s High-Speed Shutter Camera! 3-Point Measurement! Compact and Suitable for Production Lines!
The "RFS-5000" is a high-speed shutter tester for single-lens reflex cameras. It can measure the shutter speed of focal plane shutters. It is capable of measuring the rear curtain, front curtain, and delay time individually. With a compact integrated design, it is a product intended for production lines. It supports high-speed shutter cameras up to 1/8000s with three-point measurement. It can accurately measure cameras with varying thicknesses of low-pass filters. The use of LED reflection detection improves safety. The compatible image sensor size is APS-C. *Full-size compatibility is available. 【Features】 ○ LED reflection detection method ○ Improved safety through the use of LED light ○ High-speed shutter tester for SLR digital cameras ○ Compact integrated design for line production ○ Supports high-speed shutter cameras up to 1/8000s ○ Three-point measurement ○ Accurate measurement for cameras with varying low-pass filter thickness ○ Measurement accuracy: ±5μs ○ Bounce detection / full open detection ○ Compatible image sensors: APS-C (FULL MICRO4/3 MEDIUM FORMAT) ● For more details, please contact us or refer to the catalog.
Lens shutter accuracy measurement possible! High-precision waveform memory analysis method! Continuous measurement possible at 15 times per second!
The "SLE-3700" is a lens shutter tester for digital cameras that uses a high-precision waveform memory analysis method. It features a closing operation detection point setting function and a bounce detection function. The main unit and the light transmission/reception unit are designed in a compact, separate configuration. It can measure aperture diameter errors and supports continuous shooting measurements at 15 frames per second. It can be used for precision measurement of lens shutters for compact digital cameras. 【Features】 ○ High-precision waveform memory analysis method ○ Lens shutter tester ○ Compact design with separate main unit and light transmission/reception unit ○ Closing operation detection point setting function ○ Bounce detection function ○ Aperture diameter error measurement ○ IRIS (aperture diameter measurement) mode ○ Supports continuous shooting measurements at 15 frames per second ● For more details, please contact us or refer to the catalog.
Compact and low-priced! Model for production lines and service stations! Easy setup with few measurement items! [Demo available]
The "DEF-4000" is a model designed for production lines and service stations that can accurately measure the light output of single and continuous flashes. It is suitable for inspecting camera strobe flashes. It features a compact and low-cost design, automatic selection of measurement range, simple setup with few configuration items, and standard USB for convenient external communication. *Please consult us for special specifications such as LED-compatible models and high-resolution models. 【Features】 ○ Compact and low-cost ○ Model for production lines and service stations ○ Xenon flash (Xe) compatible model ○ Automatic selection of measurement range ○ Simple setup with few configuration items ○ Standard USB for convenient external communication ○ Accurate measurement of light output for single and continuous flashes ○ Measurement accuracy: ±0.05EV ● For more details, please contact us or refer to the catalog.
★Patented Product★ 9-point measurement! Continuous measurement at 25 times per second! Environmentally resistant specifications with LED reflective light detection method supporting 6 posture difference evaluation!
The "RFS-3000" is a high-speed shutter tester using LED reflection light detection. It supports 9-point measurement and continuous measurement at 25 times per second. The measurement accuracy is ±5μs for shutter speed and ±3% for others. The object being measured is an SLR digital camera body. It is designed for environmental durability and supports evaluation of 6 posture differences. 【Features】 ○ High-speed shutter tester using reflection light ○ LED reflection light detection method ○ 9-point measurement ○ Supports continuous measurement at 25 times per second ○ Environmentally durable design ○ Supports evaluation of 6 posture differences ● For more details, please contact us or download the catalog.
There are 9 independent light-receiving sections, allowing simultaneous light intensity measurement at 9 different distribution points with a single emission.
The "STB-209XL2" measures the luminous intensity, duration, and light distribution of flashlights, such as those from digital cameras, lighthouses, and airports, using xenon tubes. It has 9 independent light-receiving sections, allowing for simultaneous luminous intensity measurement (lxs) at 9 different positions during a single flash. Additionally, in illuminance measurement mode, it can measure illuminance (lx) at 9 locations simultaneously. 【Features】 ■ Observes both xenon and LED emissions ■ Measures emission duration and peak luminous intensity ■ Data management via PC software ■ Measurement data can be saved in CSV format ■ Light-receiving sections are magnetically attached for easy detachment ■ Measures the luminous intensity and distribution of flash from 9 light-receiving sections *For more details, please refer to the PDF document or feel free to contact us.
Simultaneous 2-channel counter for EV error (ΔEV) against the reference EV value.
- Inspect the appropriate exposure amount for the camera - Exposure time can also be measured simultaneously - Compatible with compact cameras - The light source part can be customized according to the lens front diameter and other factors
Compact type that can be held with one hand! Easily catch tiny metal cracks with sight and sound.
The "CT-121D" is a revolutionary eddy current flaw detector designed to be lightweight and compact. It allows for crack detection simply by the illumination of a lamp and sound, making it easy for anyone to perform measurements. In terms of performance, a newly developed sensor achieves high sensitivity, enabling the detection of fine cracks that were previously difficult to identify. Additionally, it can measure without removing paint and can also perform non-contact measurements. 【Features】 ■ High sensitivity detection of tiny cracks in metals ■ Easy detection with lamp illumination and sound ■ Measurement possible without removing paint ■ Built-in battery allows for 8 hours of continuous measurement ■ Compatible with various metals from steel to SUS and aluminum *For more details, please refer to the PDF document or feel free to contact us.
No cultivation needed! Automatic measurement of total viable count in 5 minutes!!
The Bactester allows for rapid measurement of total bacterial count (live and dead bacteria) without the need for culturing. It can be widely utilized not only in the food industry but also in materials, chemicals, pharmaceuticals, and logistics. Its portable design means it can be used in various measurement locations. The measurement principle complies with the Japanese Pharmacopoeia's "Rapid Method for Measuring Bacterial Count by Fluorescent Staining." 【Features】 ■ No culturing required, automatic measurement in about 5 minutes ■ On-site confirmation and recording of total bacterial count (live and dead bacteria) ■ Uses commercially available consumables ■ Portable design For more details, please contact us or download the catalog.
Pinhole tester
This is a "leak tester" corresponding to the qualitative leak testing method for liquid immersion tests. A simple and cost-effective package tester is convenient for qualitative leak testing of food and cosmetic packaging made of aluminum and plastic films! * A nylon tube with an outer diameter of 6mm and a vacuum pump are required separately. Please use it in combination with separately sold chambers according to the size of the package being tested.
Low-cost inspection equipment! Suitable for replacing aging inspection facilities.
The "TH-001 Harmo" is a function tester that has been modularized into A5-sized units, making it more affordable compared to traditional function testers that tend to be expensive. By freely combining various control and measurement functions, even customers who have previously given up on function testing due to high inspection costs can now build and implement a function tester at a low price. Each module is connected via Ethernet, allowing for control and measurement from remote locations, making it usable for purposes beyond inspection. 【Features】 ■ No programming environment required ■ Excellent support ■ Economical and reusable ■ Usable for purposes other than inspection *For more details, please refer to the PDF document or feel free to contact us.
A device that allows for easy measurement of the power generation characteristics of solar cells: the Solar Array Tester!
The 35030CM can easily measure the power generation characteristics of solar cell arrays and solar cell modules. A series of processes including data measurement, processing, display, and recording can be covered by this compact device. * Measurement Range 0-350V 30A, 0-50V 10A * Measurement Items Open-circuit voltage, short-circuit current, maximum output, maximum output operating voltage, maximum output operating current, solar irradiance, temperature, curve factor, I-V curve * Display Functions Measurement items, I-V curve (corrected), I-V curve (uncorrected), P-V curve * Data Processing Conversion to standard conditions (in accordance with JIS-8913) Accumulation of measurement data (equivalent to 10 items) Data communication to a computer (RS-232C)
Achieve ultra-fast inspection! You can choose from four models based on your usage conditions.
The "ESI-2020/ESI-2020ST" is a high-speed in-circuit tester that uses Microsoft Windows 7 and 10 as its operating system. It provides system stabilization, enhanced security, and ease of networking. Additionally, it comes standard with the highly acclaimed four-terminal measurement function (Kelvin measurement) from the ESI-2002 model. 【Features】 ■ Operates on Windows 7 and 10 ■ Achieves ultra-fast testing ■ Utilizes Ethernet for communication ■ Standard equipped with four-terminal low-resistance measurement function ■ Data sharing and versatile editing functions from the ESI-2002 *For more details, please refer to the PDF materials or feel free to contact us.
This is a highly reliable leak tester using a piezoresistive differential pressure sensor. It is effective for detecting very small leaks. It offers the best reliability at a low price.
We will compete with ideas and low prices.
![[Rental Service] Air Leak Tester for Air Tightness Inspection, etc.](https://image.mono.ipros.com/public/product/image/22c/2000432027/IPROS13152309626642173643.png?w=280&h=280)
Only for the necessary time when needed! Rental service launched to meet customer needs.
Is there any inspection you would like to conduct only at this time? We have started a rental service to meet such customer needs. We offer a lineup including the automatic opening and closing chamber "Soil Respiration Sampling Chamber" and the airtightness testing device "Air Leak Tester." You can use them only when needed and for the required duration. 【Features (Air Leak Tester)】 ■ Allows airtightness testing by supplying purified clean air within the workpiece ■ Provides suitable work seal jigs tailored to the workpiece ■ Offers airtightness testing devices that match the inspection specifications *For more details, please refer to the PDF document or feel free to contact us.
