Tester Product List and Ranking from 319 Manufacturers, Suppliers and Companies

800GbE Network Tester "FTBx-8880x" Series

Starting the 800GbE point-to-point tests, also supporting breakout tests with 2x400GbE and 8x100GbE!

The "FTBx-8880x" series is a network tester compatible with 800Gb Ethernet. It is expected to support various optics such as 800G-ZR/LR/LR8/FR8/2FR4/2LR4/DR8/2DR4/SR8/2SR4. Additionally, it implements 800GbE × 2 ports in one module. However, simultaneous operation is not possible (switching is possible). 【Features】 ■ Two models with different port configurations are available: ・FTBx-88800: QSFP800G × 2 ports ・FTBx-88801: QSFP800G × 1 port + OSFP800G × 1 port ■ It is expected to support various optics such as 800G-ZR/LR/LR8/FR8/2FR4/2LR4/DR8/2DR4/SR8/2SR4. *For more details, please download the PDF or feel free to contact us.

Company：セブンシックス
Price：Other

Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ethernet Tester "FTBx-88460"

You can choose from two types: a benchtop enclosure for lab environments and a portable enclosure for field tests!

The FTBx-88460 is a versatile tester that supports the new 400G/200G/100Gbps Ethernet communication standards (IEEE802.3bs, IEEE802.3ba). The newly applied PAM4 modulation and FEC for 400G bring a higher level of complexity, making quality of service measurement for 400GbE increasingly essential. Our product from EXFO comprehensively supports a variety of testing needs, including L3 layer testing, with its rich testing capabilities. 【Features】 ■ Flexibly supports various form factors such as QSFP-DD, OSFP, CFP8, QSFP28, and QSFP56 (Open Transceiver System) ■ Ensures scalability to interfaces (CFP2-DCO, 400G-ZR, etc.), capable of accommodating CFP2-DCO (over 21W) that requires high power capacity within the same chassis ■ Supports various functions such as EtherBERT, RFC-2544, TrafficGen, and EtherSAM, enabling L3 testing for IPv4 & IPv6 *For more details, please download the PDF or feel free to contact us.

Company：セブンシックス
Price：Other

Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Optical Transceiver Tester "MA-4000"

It's an all-in-one type that combines BERT, MCB, and power supply in one device!

The "MA-4000" is a tester specialized for bit error rate testing (BERT) of optical transceivers that support transmission standards such as 400GbE and 100GbE. It adopts a modular connector board (MCB) replacement method and supports QSFP-DD, OSFP, QSFP28, SFP28, and SFP-DD. There is no need for cumbersome and bulky RF cables for connection work (direct contact between circuit boards). Additionally, it features a powerful FEC simulation function that strongly supports burst error analysis. 【Features】 ■ 8 channels, 10–28GBd, supports PAM4/NRZ ■ Adopts MCB replacement method and supports QSFP-DD, OSFP, QSFP28, SFP28, and SFP-DD ■ Flexible support for future standards through MCB replacement ■ No need for cumbersome and bulky RF cables for connection work (direct contact between circuit boards) ■ Powerful FEC simulation function that strongly supports burst error analysis ■ Voltage test function with built-in power supply of 3.13–3.465V *For more details, please download the PDF or feel free to contact us.

Company：セブンシックス
Price：Other

Testing Equipment and Devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Crystal analysis device

High-efficiency heat pump suitable for crystal analysis and crystallization! A concentration device that is safe for long-term use.

The "Crystallization Device" employs a flash can and is designed to concentrate in a slurry state where crystals are precipitated. With features such as wear-resistant lining, slurry pumps, and piping design that considers crystal clogging, it ensures reliable long-term use. Additionally, it can be combined with ejectors and Roots-type heat pumps for energy savings. We provide comprehensive proposals, including seed crystals for scale prevention, separators, and dryers. 【Features】 ■ High-efficiency type utilizing heat pumps suitable for crystallization and crystals ■ Concentration in a slurry state where crystals are precipitated using a flash can ■ Energy savings possible by combining with ejectors and Roots-type heat pumps ■ Reliable long-term use with piping design that considers crystal clogging ■ Capable of supporting processes for the production of inorganic industrial products and zero discharge in desulfurization wastewater treatment *For more details, please refer to the PDF materials or feel free to contact us.

Company：ササクラ水処理事業部
Price：Other

Concentration Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mass production line tester "GRL-V-DPWR"

High cost performance! Negotiation possible up to 100W without relying on EMCA cables.

The "GRL-V-DPWR" is a tester for mass production lines of USB Power Delivery products that has both power receiving and supplying (sink/source) functions. With an open API, it allows for the creation of test programs using C#, NI TestStand, or Python, making it easy to integrate into inspection lines. The 100W sink/source capacity is supported by a housing that is cooled by powerful airflow. It also allows for extended battery charge and discharge tests and reliability tests with ample margin. 【Features】 ■ Supports USB PD 2.0 and PD 3.1 PPS ■ Equipped with USB 2.0 and USB 3.2 data loopback test functions ■ 100W power supply/electronic load with a VCONN load of 7.5W per port ■ Increased mobility with AC/battery operation ■ IR drop correction function via VBUS voltage sensing *For more details, please refer to the related links or feel free to contact us.

Company：グラナイトリバーラボ
Price：Other

Other electronic measuring instruments
Other electric meters
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Mass production test cable tester 'GRL-C-DI20'

A robust casing that withstands harsh field environments! Automatically tests and evaluates all lanes within the cable up to 20GHz without VNA.

The "GRL-C-DI20" is a production test tester for HDMI, USB, Lightning, DisplayPort, and Thunderbolt cables, connectors, and PCBs. Using native differential TDR, it automatically measures key SI characteristics such as insertion loss, return loss, and differential impedance. Additionally, by utilizing the GTrusted Benchmark Scoring tool, it allows for easy statistical analysis on a large dataset that aggregates the characteristics of multiple cables. 【Features】 ■ Everything needed for testing is included: ready for immediate testing ■ Supports 20Gbps standards like USB4, as well as 8K video standards such as HDMI 2.1, DP 1.4, and DP 2.1 ■ Supports low-speed standards such as USB 2.0, Lightning, and industrial applications ■ Easy setup and testing with a wide range of calibrated test models ■ Automatic measurement of impedance, return loss, and insertion loss, along with customizable test limits *For more details, please refer to the related links or feel free to contact us.

Company：グラナイトリバーラボ
Price：Other

Other electronic measuring instruments
Other electric meters
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Power Delivery Tester 'GRL-USB-PD-C2-EPR'

USB Power Delivery compliance tester and analyzer compatible with the latest specification 3.2.

The 『GRL-USB-PD-C2-EPR』 is a tool that significantly reduces the testing time and costs for evaluation and verification tests due to the expansion of power delivery charging capabilities up to 240W and the complexity of connection protocols. Testing compliant with EU regulations IEC62368 and IEC62680-1 can be conducted. An API is provided, allowing sample scripts to be executed and enabling users to create their own programs in C# or Python. Additionally, tests related to power delivery, other than compliance tests, can be flexibly conducted using the Power Suite Pro application. 【Features】 ■ Supports power delivery standard 3.2 up to 240W ■ Compliant with EN IEC62368 / IEC62680-1 ■ Emulates source and sink with Power Suite Pro, featuring a rich API and sample scripts ■ Capability acquisition function ■ Fully automated compliance test mode ■ Alternate mode / Quick ChargeTM testing *For more details, please refer to the related links or feel free to contact us.

Company：グラナイトリバーラボ
Price：Other

Other electronic measuring instruments
Other electric meters
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Charger Tester "GRL-WP-BST-C3"

Compliance tester with debugging support function compatible with the wireless charging standard "Qi," essential for smartphone wireless charging.

The "GRL-WP-BST-C3" is a compliance tester that supports the Qi charging standard established by WPC. It supports a baseline power profile (BPP) of up to 5W and an extended power profile (EPP) of up to 15W, simplifying compliance testing for wireless charging. It is also compatible with Samsung's PPDE testing. GRL's charging test solution portfolio includes various testing capabilities for both wired and wireless technologies such as Qi, USB Power Delivery, and Qualcomm QuickCharge. 【Features】 ■ Tests BPP and EPP power profiles of Qi base stations with a single unit ■ Supports all BPP tests of Qi standard v1.2.4 (officially approved by WPC) ■ Supports BPP and EPP of Qi standard v1.3 ■ Achieves fast and accurate testing through full automation ■ Supports automatic measurements using an oscilloscope *For more details, please refer to the related links or feel free to contact us.

Company：グラナイトリバーラボ
Price：Other

Other electronic measuring instruments
Other electric meters
Tester

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Packaging Container Air Leak Test Device (Desktop Model) | MSP series

Desktop machine for Container Closure Integrity Testing (CCIT)" "Device for testing the seal integrity of packaging containers

This is a leak testing device to confirm the airtightness of packaging containers. - Achieves improved reliability of formulations - Detects peeling, tearing, and the presence of pinholes in packaging containers, and displays differential pressure, leakage amount, graphs, etc. - Easy operation with a touch panel - Inspection targets: pillow packaging, PTP, three-side or four-side seals (packaged products), plastic bags (e.g., infusion bags), strip packaging (SP packaging), gusset packaging, stick packaging, jar containers, etc. - Usage locations: manufacturing offline, CMC laboratories, quality control testing laboratories, stability testing, etc.

Company：フクダ
Price：Other

Leak Testing Equipment
Other packaging equipment, materials and tools
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pillow packaging total leak test device | MSQ-2000 series

Basic model of the total leak testing device / Fully automated leak testing for pillow packaging

The leak test for packaging engineering is fully automated, eliminating defective packaging based on certain quality standards. The judgment results and operational status can be managed via a monitor screen. - Quantitative management of quality standards for the leak test process - Ensuring the quality of the product's shelf life - Establishing evaluation criteria for the manufacturing process to achieve quantitative quality assurance - Can be connected to existing production lines in a slim, space-saving design - Quick changeover for product variety switching can be handled in a short time by exchanging chambers - Complete domestic production ensures peace of mind for maintenance and troubleshooting - Target work: pillow packaging

Company：フクダ
Price：Other

Leak Testing Equipment
Other packaging equipment, materials and tools
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Temperature Compensation Leak Tester | FL-612 series

Air leak tester with temperature correction function. It may be possible to perform effective correction for heated workpieces after the cleaning process.

The "FL-612 series" is a product developed to enable effective temperature compensation for powertrains such as engines and transmissions. It features a correction function and correction mechanism that reduce misjudgments during airtightness testing in heat dissipation conditions occurring after cleaning, drying, and assembly processes. 【Features】 ■ Improved productivity (better straightness rate, avoidance of misjudgments) ■ Reduced equipment costs (elimination of cooling processes) ■ High-temperature work compatibility (supports after work cleaning and drying) ■ Improved accuracy (responds to changes in work temperature and ambient temperature) ■ Equipped with USB port *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Leak Tester with Automatic Calibration Function | FLZ-0620 series

The air leak tester has become a measuring device! Overall accuracy has improved by 30% (compared to our previous model).

The "FLZ-0620 series" is an air leak tester with an automatic calibration function that maintains high precision and reproducibility by auto-calibrating the leakage amount during measurement. By achieving high stabilization of the reference tank (master), it suppresses zero drift of the master (reference). It features a separate structure that allows the workpiece and measurement unit to be placed in the same temperature environment, which helps to minimize flow changes due to temperature. 【Features】 ■ Tester is separated into a display unit and a measurement unit ■ Measurement unit and workpiece can be installed in close proximity, creating the same environment ■ Reduction of piping compared to conventional models is possible ■ Equipped with an auto-calibration function ■ Easy data input and output via USB host and USB function *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Calibration and repair
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Separate Type Leak Pressure Unit Air Leak Tester

Separate type air leak tester "LPU-300 series" "LPU-100/024 series"

The air pressure unit and measurement sensors can be bundled together, while control and display options are available separately. The "LPU-300 series" is the smallest measurement unit in Fukuda's history, making it ideal for direct attachment to as small a workpiece as possible. It can achieve higher measurement sensitivity compared to conventional all-in-one leak testers (depending on measurement conditions). The "LPU-100 / LPU-024 series" is used as a separate air leak tester in combination with display units (MI-170 / MIZ-0175 / DG-960). The separate display design makes it easier to position the measurement unit close to the workpiece. 【Features】 ■ Compact design that is easy to integrate into measurement devices ■ LPU-300 with control circuit sold separately, and LPU-100/024 where control is left to the customer ■ Rational and low-cost, choosing only the necessary functions ■ Even at a low cost, the differential pressure sensor is equivalent to general-purpose models ■ LPU-300 has a sensor volume of less than 1 mL, excelling in high-sensitivity measurements *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Dedicated Leak Test System for Small Electronic Components | MS Series

Introducing our lineup of fully automatic machines, dedicated machines, and tabletop types! We present a specialized airtight inspection device for small electronic components.

The "MS series" is a leak test system for small electronic components that require airtightness, including: - Crystal devices - Ceramic oscillators - Optical devices - Power semiconductors - CAN devices - Laser diodes - Capacitors Leak testing of sealed products may involve both gross leak and fine leak inspections, depending on product specifications and characteristics. We offer a lineup that includes fully automatic machines capable of performing the entire process in one unit, custom-built dedicated machines, and convenient tabletop types for sampling inspections. 【Lineup (excerpt)】 <Fully Automatic Devices> ■ Gross Leak Test System - MSZ-6200 - MS-6086 ■ Bombing Gross and Fine Leak Test System - MSX-6110 - MSX-6200 - MSX-7000 *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bombing Gloss Finely Leak Test System | MSX-0101

This is a composite airtightness testing device that completes filling by bombing, gross leak detection through pressure change confirmation, and fine leak detection using mass spectrometry, all in one unit.

The "MSX-0101 series" is a compact leak testing device specifically designed for electronic components such as MEMS, crystal devices, and SMDs. It is fully equipped with helium filling, gross leak testing, and fine leak testing in a single system. By managing the filling time and waiting time, it allows for proper gross and fine leak testing. 【Features】 ■ Ideal for leak testing of electronic components such as MEMS and SMDs ■ Quantifies gross and fine leak amounts while managing filling time and waiting time ■ Capable of performing both gross leak testing and fine leak testing with one device ■ Enables highly accurate fine leak measurement by appropriately setting bonding conditions and gross leak conditions *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ultrafine Leak Test System | MUH-0100

High-sensitivity leak testing for small electronic components! We offer solutions down to ultra-fine leaks [patented technology].

The "MUH-0100 series" is a leak testing device specifically designed for ultra-micro leak measurement that employs the "capsule accumulation method." Our company has developed a high-sensitivity helium leak detection technology called the "capsule accumulation method" for measuring ultra-micro leaks. MEMS components such as angular velocity sensors and infrared image sensors, as well as small electronic components, need to maintain their sealing properties over long periods, requiring high airtightness. 【Capsule Accumulation Method Features】 ■ Capable of measuring up to 4×10⁻¹⁵ Pa·m³/s (He) ■ Significantly reduces background noise ■ Capable of detecting ultra-micro helium leaks ■ Reduces the influence of gases other than helium, which can be sources of error ■ Eliminates the need for heaters or ultra-low temperature pumps, with startup maintenance times comparable to standard helium leak detectors ■ Commercially available standard leaks can be used for calibrating helium accumulation amounts *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sealed Product Air Leak Test Device | MSZ Series

Dry non-destructive testing that does not get wet. Since it is a tabletop machine consolidated into one unit, there is no need to create jigs.

The "MSZ series" is an air leak testing device that verifies the sealing and waterproofing of sealed products. Three models are available to accommodate the size of the products being tested. It can be used for a variety of products, including packaging equipment and electronic devices. 【Features】 ■ Quantification of leakage amount ■ Quantitative and reproducible measurement results ■ Testing of airtightness and waterproofing of sealed products (e.g., equivalent to waterproof standards IPX7, IPX8) <Examples of items to be tested> ● Automotive parts ● Electronic devices ● Electronic components ● Packaging containers (food, cosmetics) and various packaging containers *Please refer to the "Applications and Achievements" section below. 【Measurement Precautions】 - A space (air) of at least 1 mL is required within the item being tested. - The information provided is an example; please consult us regarding the feasibility of measurement. *For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Sealing
Defect Inspection Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Flow Standard | FFM Series (Reference Instrument / Calibration Instrument)

A standard device/calibrator that generates a specific flow rate. Convenient as a "standard leak" for setting conditions of air leak testers, checking sensor sensitivity and flow, and for daily inspections!

The "FFM series" is an essential piece of equipment to ensure the reliability of air leak tests. It has minimal material degradation over time, allowing for safe and stable sensor sensitivity verification and leak tester inspections for extended periods. Sensor sensitivity verification and inspection can be utilized as a "standard leak." 【Features】 ■ Active in routine inspections and more ■ Can be directly connected to the calibration port of air leak testers ■ Built-in flow standard enhances the convenience of air leak testers ■ Allows for verification of measurement errors by comparing the values indicated by the tester with those of the flow standard ■ Easily creates conditions for detecting leaks or confirming their absence ■ JCSS Registration | JCSS Calibration Certification (please contact us for details) https://www.nite.go.jp/iajapan/jcss/labsearch/index.html ↑↑↑ By searching for "Fukuda" on this URL site, it will be displayed * For more details, please refer to the PDF materials or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Calibration and repair
Flow Control
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

All stainless steel specification general-purpose air leak tester | FLS-0100

Responding to site environments that require the non-use of specific metals such as in electronic component factories and battery factories! This is an air leak tester that does not use copper, aluminum, etc.

The functionality follows the FL-611, which boasts the highest installation record among our company's leak testers. 【Features】 ■ All stainless steel, non-copper specifications ■ Fluororesin is used for the resin piping ■ Designed for safety using the well-regarded FL-611 housing, known for its operability and visibility ■ The functionality similarly follows the FL-611, demonstrating high performance * For more details, please refer to the PDF document or feel free to contact us.

Company：フクダ
Price：Other

Leak Testing Equipment
Stainless steel utensils and containers
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Pilot Regulator | P-200

A pressure relief valve with high micro-pressure control capability, suitable for micro-pressure control. Please use it for stable supply of test pressure.

The pilot regulator "P-200" has high micro-pressure control capability and is a pressure reducing valve suitable for micro-pressure control. The controllable output pressure ranges from 0.1 kPa to the positive pressure side, and in the case of negative pressure specifications, it ranges from -0.1 kPa. The positive pressure specification has a function to maintain the set pressure constant by adjusting the flow rate that relieves from the output side to the atmospheric pressure side, while the negative pressure specification adjusts the flow rate that relieves from the atmospheric pressure side to the output side. 【Features】 - It uses a large diameter nozzle flapper method, providing excellent stability. - It has excellent pressure reproducibility. - It has a wide range of set pressure from micro-pressure to low pressure, making pressure adjustment easy. - Differential pressure (ΔP) control is also easy. - It has a relief structure, and the positive pressure specification can be used as a high-sensitivity relief valve.

Company：フクダ
Price：Other

Leak Testing Equipment
Pressure Control
Flow Control
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Vial Full Leak Test Device | MSQ-2002 series

Compliance with Container Closure Integrity Testing (CCIT)! Fully automated leak testing for pharmaceutical packaging (various vials, bottles, eye drop containers, cylindrical containers, etc.)!

Compliance with Container Closure Integrity Testing (CCIT) for pharmaceutical packaging Fully automated leak testing for various vials, bottles, eye drop containers, and cylindrical containers - GMP validation compliant - Data integrity compliant - CSV Category 3 compliant - Inspection accuracy confirmed by positive controls (Φ10 μm and Φ20 μm) * Conveyor is not included with this product. Specifications are subject to change without notice.

Company：フクダ
Price：Other

Leak Testing Equipment
Other packaging equipment, materials and tools
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Sealed Product Air Leak Test Device | MSZ-0701 series

New standards for waterproof testing. A non-destructive dry leak test device that does not get wet. Capable of testing equivalent to IPX7 and IPX8.

This is an air leak testing device that quantifies and assesses the sealing performance, waterproofness, and airtightness of sealed products based on pressure changes. ● Features - Dry non-destructive testing that does not wet the product - Quantifies leakage amounts for scientific quality control - Capable of air leaks equivalent to waterproof standards IPX7 and IPX8 - The allowable size for tested products is up to W 300 × D 210 × H 100 mm ● Target Products Automotive parts: In-vehicle cameras, smart keys, ECUs, LED lights Electronic components: Small motors, waterproof connectors, relays, sensors Pharmaceuticals and food: Packaging containers, electronic devices like smartphones, wearable devices and other sealed structural products in general ● Main Specifications Test pressure range: 1 to 200 kPa abs External dimensions: W 470 × D 720 × H 416 mm Weight: 50 kg Number of channels: 100 ch Please contact us for more details.

Company：フクダ
Price：Other

Leak Testing Equipment
Defect Inspection Equipment
Sealing
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Masterless Differential Pressure Air Leak Tester | FLA-0200 series

A masterless air leak tester that does not require an external reference during measurement. It measures the differential pressure between the workpiece and the built-in master tank.

This is a masterless air leak tester that does not require an external reference during measurement. It performs differential pressure measurements using an integrated master tank. Since there is no variation in the built-in master itself, stable measurements can always be achieved. Furthermore, this is our top-of-the-line model of the masterless leak tester, which also realizes a reduction in measurement time through mastering measurements. ● Equipped with preventive maintenance functions ● Mastering correction function ● Self-diagnosis function ● 5.7-inch touch panel display ● Network communication compatible (optional)

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

General-purpose differential pressure air leak tester | FLA-0201 series

A versatile air leak tester that can flexibly adapt to various measurement environments. It is Fukuda's flagship model.

A versatile air leak tester that can flexibly accommodate various measurement methods (comparison between workpieces, comparison between workpieces and masters, comparison between workpieces and fixed masters (masterless)) and measurement environments. With a rich lineup of nine types that can handle high pressure, it allows for high-precision measurements in a short time through mastering measurement, making it Fukuda's flagship model. The masterless differential pressure air leak tester 'FLA-0200 series' is also available. ● Equipped with preventive maintenance functions ● Mastering correction function ● Self-diagnosis function ● 5.7-inch touch panel display ● Network communication compatible (optional) *Please contact us if you require a test pressure of 1 MPa or higher.

Company：フクダ
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Automatic Transmission Finished Product Inspection Tester

Using an AC motor to recreate a virtual driving condition! Functional tests will be conducted in a real vehicle state.

The "Finished Product Inspection Tester" we handle conducts functional tests of automatic transmissions (A/T) in a finished state and under real vehicle conditions. Instead of using engine power (INPUT) and wheel load (OUTPUT), an AC motor is employed to simulate a virtual driving condition and inspect the product's functionality. As an ECU simulator, our drive unit performs shift control. 【Inspection Items】 ■ Inspection of shifting conditions Measurement of gear ratio and input/output shaft rotation speed ■ Inspection of shift shock Measurement of hydraulic pressure and torque ■ Parking characteristic inspection and abnormal noise inspection (FFT) *For more details, please refer to the PDF materials or feel free to contact us.

Company：日本ファインテック本社
Price：Other

Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

NL Select Valve NL-S2 Series

Leak test circuit dedicated switching valve

It demonstrates its effectiveness in pneumatic circuits where leak is not allowed. When switching between work and master is required, a switching valve needs to be inserted into the test circuit that must not leak. Cosmo Instruments offers a dedicated switching valve based on our expertise in leak testing. This ideal valve prevents valve leaks and also prevents deformations.

Company：コスモ計器
Price：Other

Other inspection equipment and devices
Leak Testing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Leak Master LM-1C/LM-1AH

Accurate, stable and convenient micro-leak (flow) generator

Ideal for daily inspections of Air Leak Testers. Can stably generate minute air flows of 0.1 mL/min or more. Supports high pressures up to 4.9 MPa.

Company：コスモ計器
Price：Other

Leak Testing Equipment
Other measurement, recording and measuring instruments
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Leak Tester with Temperature Compensation LS-R902 (ATC)

Are you having trouble with leak test after washing process? We can help you reduce measurement errors and false rejects caused by the influence of work temperature.

When the work temperature is higher than the ambient temperature in such a case as after washing process, the temperature change of the work as a result of thermal exchange with the clamp fixture affects the leak measurement. To cope with it, the measured value can be compensated using the correlation between the differential pressure change and work temperature that causes measurement errors. The Temperature Compensation realizes highly accurate leak tests and reduces false rejects.

Company：コスモ計器
Price：Other

Leak Testing Equipment
Other inspection equipment and devices
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Leak Tester Entry Model LS-R700

Compact Air Leak Tester with a focus on user-friendliness, equipped wide range of features, making it a high-performance entry-level model.

This Air Leak Tester combines the experience and know-how that Cosmo Instruments has nurtured over many years with advanced features and newest technology. The color LCD and icons have revamped the operation of measuring instruments that are often considered difficult to use. Multilingual (English, Japanese, Chinese). The measurement screen offers three types of displays. Depending on the situation, you can switch between “Standard”, “Advanced”, and “Waveform”. The LS-R700 is a new Air Leak Tester that can meet various demands.

Company：コスモ計器
Price：Other

Other inspection equipment and devices
Leak Testing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Air Leak Tester Compact Model LS-1866

Compact differential pressure Air Leak Tester equipped with a variety of functions, pursuing ease of use and cost performance.

LS-1866 is a compact, lightweight, easy-to-handle differential pressure Air Leak Tester. The Master-Preset and Noise Reduction improve detection and reduce test time. The latest enhanced features such as multi-channel, direct reading of leak rates are available.

Company：コスモ計器
Price：Other

Other inspection equipment and devices
Leak Testing Equipment
Tester

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tester Product List and Ranking from 319 Manufacturers, Suppliers and Companies | IPROS GMS

Tester Manufacturer, Suppliers and Company Rankings

Tester Product ranking