We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for alloy.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

alloy(co) - List of Manufacturers, Suppliers, Companies and Products | IPROS GMS

Last Updated： Aggregation Period:Feb 04, 2026～Mar 03, 2026
This ranking is based on the number of page views on our site.

alloy Product List

31～60 item / All 108 items

Displayed results
ECO Series <Silver Copper Original Series>

ECO Series <Silver Copper Original Series>

Providing alternative products from various manufacturers that consider the environment! Introducing products that comply with environmental pollution regulations.

White copper is working to reduce the use of environmental pollutants from the perspective of ESG/SDGs. The "ECO Series" is based on the conditions that it is made from materials that comply with restrictions on the use of specific harmful substances from the perspective of human health and environmental protection, and that it is made from materials and methods that reduce carbon dioxide emissions for the protection of the global environment. We comply with regulations such as the European Union (EU) Restriction of Hazardous Substances (RoHS) directive and provide alternative products from various manufacturers that are environmentally friendly. 【Product Lineup (Partial)】 ■ Eco Brass Round Bar ■ BZ5A (Cadmium-free, Lead-free) Free-Cutting Round Bar ■ Rose Bronze Round Bar / Round Tube ■ Lead-free Bronze Round Bar / Round Tube ■ Corrosion Hard Cutting Plate / Round Bar *For more details, please refer to the PDF materials or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
GLIDCOP®

GLIDCOP®

Dispersion strengthening of base copper with alumina fine particles.

Oxide dispersion strengthened (ODS) copper alloy that possesses both high strength and high conductivity, which are contradictory elements in other copper alloys.

  • Glidcop 写真.jpg
  • Steel
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High-performance lead-free copper alloy "ECO BRASS"

High-performance lead-free copper alloy "ECO BRASS"

Cumulative sales performance of over 300,000 tons! Alternatives available from various metal materials! High-performance lead-free copper alloys with high strength, excellent machinability, high corrosion resistance, and wear resistance.

"ECO BRASS" is an eco-friendly material that is lead-free and has achieved excellent machinability without the addition of lead, taking into consideration both people and the planet. It is a high-performance material that, while being high-strength, excels in machinability such as cutting, forging, and casting, and also solves issues related to stress corrosion cracking and dezincification corrosion. It boasts a cumulative sales record of over 300,000 tons and a monthly output of 3,500 tons, all lead-free. Additionally, it complies with various environmental regulations, including RoHS and ELV directives, as well as JWWA standards (Japan Water Works Association standards), allowing for safe and reliable use across various fields beyond just copper alloy products. 【Applications】 ■ High-strength components related to EVs and FCVs. Bearings and sliding parts. ■ Water faucets and various fitting parts as a substitute for bronze. 【Features】 ■ High strength, excellent machinability, high corrosion resistance, and wear resistance. ■ Compliant with RoHS directive, ELV directive, and JWWA standards. ■ Can be processed into various shapes, allowing for products tailored to customer needs. ■ Does not contain environmentally harmful substances. ■ Enables miniaturization and thinning of parts, expanding design possibilities. ■ Exhibits excellent corrosion resistance and wear resistance. ■ Possesses excellent antibacterial properties. *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"Environmentally Resistant Bush Lineup" *Materials Provided

"Environmentally Resistant Bush Lineup" *Materials Provided

Active in dust-heavy scenes such as mining sites. Various types available, including spherical types and maintenance-free types.

Our company offers a wide range of "bushings" that cater to various needs, from reasonably priced products to those pursuing high performance. This time, we would like to introduce products that demonstrate stable performance over a long period, even in environments with a large amount of dust, such as mining sites and construction sites. 【Product Lineup】 ◎ "PEL BH Series" Bushings with excellent anti-seizing performance and impact resistance ◎ "FAM Series" Capable of withstanding high loads and exhibiting high wear resistance ◎ "H-Liner Series" Maintenance-free type that can be used without lubrication *We are currently providing materials with durability test data. You can view them from the "Download" section.

  • Plastic bearings
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
ECOMEX TH Unadjusted Core Crosshead for Micro Diaphragm

ECOMEX TH Unadjusted Core Crosshead for Micro Diaphragm

Crosshead for rubber extrusion molding

This is a non-adjustable crosshead developed for rubber extrusion. It is ideal for rubber wire extrusion.

  • Extrusion Machine
  • Resin processing machine
  • Rubber Processing Machine
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tohoku University Technology: High-Strength Co-Based Metallic Glass Alloy: T06-003

Tohoku University Technology: High-Strength Co-Based Metallic Glass Alloy: T06-003

It is an alloy with high glass-forming ability (capable of φ14mm), high machinability, and high strength (with a compressive strength of over 4000 MPa).

Metallic glass alloys, unlike conventional crystalline metals, mostly do not exhibit plastic elongation in tensile tests. Even in compositions that do show plastic elongation, they only demonstrate about 2-3% elongation, resulting in very little ductility under uniaxial stress. Therefore, plastic processing such as rolling or forging, which is common with conventional crystalline metals, is difficult. Furthermore, metallic glass alloys have higher strength compared to regular metals, with some alloys reaching up to 5000 MPa, and their machinability is not as good as that of steel. However, metallic glass alloys have the characteristic that the viscosity of the material drops sharply above the glass transition temperature, allowing for various processing techniques (viscous flow processing) in the supercooled liquid region. By utilizing viscous flow, they can become materials with excellent machinability. This invention relates to Co-based metallic glass alloys that combine good machinability, high strength, and high glass-forming ability.

  • others
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low melting point alloy "U-Alloy (U-ALLOY)"

Low melting point alloy "U-Alloy (U-ALLOY)"

Increased strength, suitable for a wide range of applications! Asahi Metal's low melting point alloy that dissolves in hot water.

"U-ALLOY" is a low-melting-point alloy from Asahi Metal that dissolves in hot water. By adding different metals to traditional materials, the strength of the alloy is increased. It enables extensive applications in fields that were previously not utilized, such as "fusible metals for automatic fire extinguishing sprinklers" and "molds for plastic molding." Additionally, we offer "U-ALLOY ECO," which does not contain lead or cadmium, in a lineup of seven varieties that are environmentally friendly. 【Features】 ■ Increased strength by changing the quality of the alloy ■ Wide range of applications possible ■ Alloy that melts in hot water ■ Applications are expanding dramatically *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Dissolving material 'SB 5/SMW 605'

Dissolving material 'SB 5/SMW 605'

Especially effective for spheroidal graphite cast iron! An influential inoculant alloy based on ferrosilicon.

We would like to introduce our treatment alloy "SB 5/SMW 605." "SB 5" is a highly effective inoculant FeSi, suitable for both flake graphite cast iron and spheroidal graphite cast iron. Aluminum and calcium provide excellent inoculation effects across a wide range of materials, while barium extends the fading time, ensuring reliability throughout the entire casting process. "SMW 605" is a powerful inoculant alloy based on ferrosilicon, particularly suitable for spheroidal graphite cast iron. Bismuth, along with cerium, significantly increases the number of spheroidal graphite particles. 【Features of SB 5】 ■ Good solubility ■ High inoculation effect ■ Long-lasting inoculation effect ■ Low addition amount ■ Uniform graphite crystallization ■ Suppression of carbides ■ Improvement of mechanical properties *For more details, please refer to the PDF document or feel free to contact us at info.japan@ask-chemicals.com.

  • alloy
  • Other metal materials
  • others
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Bush

Bush

It has excellent strength, heat resistance, and chemical resistance.

Leave the bushes to us!! 【Product Lineup】 ● POM / Bush ... Strength ● PA66 / Bush * For more details, please refer to the PDF document or feel free to contact us. * Online shop here → https://www.chemisnetshopping.co.jp/

  • Other machine elements
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
High cost performance and high performance "bush sliding components"

High cost performance and high performance "bush sliding components"

Highly wear-resistant! High-performance bush sliding components that contribute to cost reduction.

HEF DURFERRIT has been developing a series of bushes that can meet a wide range of customer needs for the past 20 years, based on expertise in surface treatment and deep knowledge of tribology. The bushes developed and manufactured by the HEF Group are characterized by special surface treatments and surface geometries (such as cross-hatching and cavities). We provide optimal proposals that match your needs, from reasonably priced products to high-performance items. 【Features of HEF Bushes】 - High wear resistance contributing to cost reduction - Long-lasting stable low wear characteristics, extended lifespan, long spans - High seizure resistance - Regular lineup that meets all needs For more details, please contact us or download the catalog.

  • Other machine elements
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Microdia unadjusted core cross head ECOMEX

Microdia unadjusted core cross head ECOMEX

Eco wire extrusion crosshead for non-halogen, flame-retardant material that is difficult to extrude.

This is a non-adjustable crosshead developed for extruding non-halogen and flame-retardant additive materials that are difficult to extrude. It is ideal for eco-friendly wire extrusion.

  • Extrusion Machine
  • Resin processing machine
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Introduction of Employment Achievements: CCTY Automotive Parts

Introduction of Employment Achievements: CCTY Automotive Parts

CCTY Adoption Results [Automotive, Motorcycle, ATV] Powertrain, Drive System, Suspension, Seat, Wiper

【Delivery Performance】 (Product codes in parentheses are CCTY product codes) ■ Engine-related: Belt Tensioner Supplied oil-free bushes (TFA) to major belt tensioner manufacturers in Europe, the U.S., and China. ■ Transmission-related: Dual Mass Flywheel Supplied PTFE bushes (TOA) to major transmission manufacturers in China. ■ Suspension: Supplied PTFE bushes (TLA) and spherical bearings (GE series, COS series) to major suspension manufacturers in Japan, Europe, and China (for details, please download and view the materials). ■ Interior: Seats Supplied oil-free bushes (TSA) and metal bushes (MBA) to seat manufacturers in the U.S. and China. ■ Exterior: Wipers Currently supplying oil-free bushes (TSA) to a wiper manufacturer in the U.S.

  • Company：CCTY
  • Price：Other
  • Metal bearings
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Copper alloys - Beryllium copper, zirconium copper, aluminum bronze, Corson alloy

Copper alloys - Beryllium copper, zirconium copper, aluminum bronze, Corson alloy

A special copper alloy with excellent conductivity, corrosion resistance, strength, and workability! We introduce our advantages, the copper alloys we handle, our manufactured products, and examples of usage by industry.

Due to the difficulty in obtaining various types/shapes/dimensions of copper alloys, we offer high-quality copper alloys at competitive prices, even if they are relatively expensive. 【Handling Copper Alloys】 ■C17200, C17500, C17510, C18000, C18150, C18200, C63000, C63020, etc. ■CuCrZr, CuNi2Si, CuNi3Si+Cr, CuCoNiBe, CuCo2Be, CuBe2, CuNi2Be, etc. 【Product Items】 Round bars, hollow bars, forged rings, forged discs, square forged Centrifugal casting, sand casting, and we can also accommodate machining and surface treatment. 【Industry-Specific Usage Examples】 Aerospace (certified equivalent to AS9100 = JISQ9100) Motors, energy, oil & gas (including explosion-proof), resistance welding Aluminum die casting, jigs & molds, food molds, heavy industry This catalog features the copper alloys we handle. We provide detailed information on the advantages and usage examples of various products, including "beryllium copper," "chromium copper/zinc copper," "aluminum bronze," "Cobalt alloys," and "nickel silver." Please feel free to download and take a look.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
About Shape Memory Alloy Nitinol - Ver.1 Basic Knowledge

About Shape Memory Alloy Nitinol - Ver.1 Basic Knowledge

Explanation materials on the basic knowledge of Nitinol - Detailed explanation of phase transformation, measurement methods for transformation temperature, superelasticity, and shape memory effect, including the underlying principles.

Shape Memory Alloys (SMA) are unique metals that can return to their original shape when they reach a specific temperature. SAES's group company, memry, boasts the world's largest production capacity of Nitinol (Ni-Ti) and has nearly 30 years of experience in low-invasive medical devices such as stents, catheters, and guidewires. Nitinol often cannot directly apply the characteristics, design concepts, and manufacturing processes of conventional metal materials, requiring a wealth of knowledge and expertise in handling. Please utilize this document to expedite the learning process for companies and engineers who are using Nitinol alloys for the first time.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[FAQ Document] Soft Magnetic Material of Iron-Nickel 'Permalloy'

[FAQ Document] Soft Magnetic Material of Iron-Nickel 'Permalloy'

Attention those struggling with magnetic properties! We are offering an FAQ document about the soft magnetic material "Permalloy," which has low coercivity and high permeability! A list of thicknesses is also included.

Permalloy is a nickel-iron alloy that contains 35-80% nickel (Ni) and is supplied in various forms such as sheets and rods, similar to many other metals. Its appearance is not significantly different from stainless steel or iron, but it possesses special properties that strongly attract magnetism. Due to its low coercivity and high permeability, it has a high magnetic shielding effect and a strong magnetic collecting action. It also exhibits a large output (magnetization) in response to fine input (magnetic field), and it increases the resistance (the ratio of voltage to current) in alternating current. As a result, it is applied in magnetic shielding rooms, magnetic shielding cases, magnetic shielding boxes, magnetic sensors, and various inductors (coils with windings on a core). It is effective in a relatively low frequency range, from extremely low frequencies below 1 Hz to commercial frequencies up to 200 Hz. 【Effects】 ■ High magnetic shielding effect and strong magnetic collecting action ■ Large output (magnetization) in response to fine input (magnetic field) ■ Increases resistance (the ratio of voltage to current) in alternating current *For inquiries or consultations regarding Permalloy, please use the contact form on our company website. 【Contact】https://www.ohtama.co.jp/contact.html

  • alloy
  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Low melting point alloy "U-Alloy"

Low melting point alloy "U-Alloy"

Low melting point alloy that dissolves in hot water suitable for fixing punch dice!

"U-Alloy" is a low melting point alloy with a melting temperature of 16 to 183°C. It can be used mainly for "fusible metals in automatic fire extinguishing sprinklers," "safety valves for high-pressure gas cylinders," "fixing during turbine blade processing," and more. [Applications] ■ Safety valves for high-pressure gas cylinders ■ Fusible metals in automatic fire extinguishing sprinklers ■ Fixing during turbine blade processing ■ Adhesives for lens processing ■ Molds for plastic forming *For more details, please download the PDF or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Aluminum alloy small block "VE"

Aluminum alloy small block "VE"

The impact during material input is reduced, extending the furnace repair cycle.

"VE" is a small aluminum alloy block that improves fuel efficiency compared to conventional ingots and reduces environmental impact. By increasing the melting speed, productivity is enhanced. Fuel efficiency improves by approximately 30% or more, leading to a reduction in CO2 emissions. Furthermore, sizes and composition (standard is AD12.1) can be adjusted to meet customer needs. 【Features】 ■ Increased productivity ■ Fuel efficiency improved by approximately 30% or more ■ Smaller shape reduces impact during material loading ■ During filling, gaps are filled, preventing oxidation from direct flame, thus improving yield ■ Packaging materials can be reused, contributing to waste reduction *For more details, please refer to the PDF document or feel free to contact us.

  • aluminum
  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super austenitic stainless steel alloy "SANICRO 35"

Super austenitic stainless steel alloy "SANICRO 35"

We fill the gap where general-purpose stainless steel doesn't hold up and nickel-based alloys are too costly. Pitting resistance index PRE 52!

Our company has developed a new super austenitic stainless steel alloy called 'SANICRO 35'. The target area for SANICRO 35 is to fill the gap where general-purpose stainless steels are not sufficiently effective and where expensive nickel alloys do not provide cost-effectiveness. With a moderate nickel content, it has very high pitting resistance, surpassing that of conventional 6Mo steel grades. Depending on the environment, it can also replace nickel-based alloys such as Alloy 825 and Alloy 625. It possesses excellent corrosion resistance for use in high chloride applications and other highly corrosive environments. 【Features】 ■ Designed for use in harsh corrosive environments ■ Exhibits very high performance in terms of strength and corrosion across a wide range of usage conditions ■ Does not require preheating or post-weld heat treatment ■ Minimizes the occurrence of intermetallic compound phases and precipitates due to heat ■ Excellent formability allows for cold bending and narrow bending radii When designing equipment such as heat exchangers, please consider SANICRO 35, which can minimize risks and extend lifetime. *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Materials for Industrial Knives and Blades [TOKUSHU KINZOKU EXCEL CO., LTD.]

Materials for Industrial Knives and Blades [TOKUSHU KINZOKU EXCEL CO., LTD.]

High strength can be achieved through quenching, making our steel suitable for a variety of blades, including razor blades, cutter blades, and medical blades.

High strength can be achieved through quenching, making our steel suitable for a variety of blades, including razor blades, cutter blades, and medical blades. We control the grain size using our proprietary rolling and heat treatment technologies, which enhance hardenability, workability for blade attachment, and wear resistance. In addition to high carbon steels, we also produce various types of stainless steels, allowing you to select the most suitable steel grade based on your specific applications and required properties.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Fe-Al alloy "ALFe"

Fe-Al alloy "ALFe"

Lightweight and compact components! New alloys suitable for forging, machining, and pressing!

"ALFe" is a new alloy made of 8% iron and aluminum (Fe8Al). By applying special processing heat treatment to the Fe-8wt%Al alloy, which is said to not undergo order-disorder transformation, we have successfully induced order-disorder transformation to impart functionality. 【Features】 ■ About 10% lighter than iron: Specific gravity of ALFe is 7.0 compared to iron's 7.85 ■ Workability: Can be forged, machined, and pressed (can be produced on existing lines) ■ Electromagnetic properties: Comparable to electromagnetic stainless steel (ferromagnetic, good permeability, excellent magnetic retention) ■ Heat resistance: Equivalent to Incoloy 800 at temperatures up to 900℃ ■ Damping properties: Effective against micro-vibrations (has rigidity comparable to iron and absorbs vibrations) *For more details, please refer to the PDF document or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Super hard alloy 'CF-H40S+'

Super hard alloy 'CF-H40S+'

Alloy tailored to the production needs of rotors and stators.

We offer the carbide grade 'CF-H40S+'. The CF (Corrosion-free) grade is a carbide alloy specially developed for the mold and tool industry, recognized as a genuine corrosion-resistant carbide alloy (CF grade). It is widely used by many customers as blanks for press and punch processing of rotor and stator sheet components for electric motors. This product, which is a representative of our corrosion-resistant carbide materials (CF grade), has proven its true corrosion resistance over many years. Its continued selection by leading companies in the industry is evidence of its quality. Please feel free to contact us if you have any inquiries. *For more details, please download the PDF or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Materials for Bellows [TOKUSHU KINZOKU EXCEL CO., LTD.]

Materials for Bellows [TOKUSHU KINZOKU EXCEL CO., LTD.]

Wide variety of metal materials for bellows! Please choose according to your specifications and purpose.

There are several types of bellows, such as welded bellows and molded bellows, depending on the manufacturing method. Bellows are used for pressure sensing and sealing because they can flexibly expand, contract, and bend while maintaining a tight seal for gases and liquids. Metal bellows have superior strength, corrosion resistance, and heat resistance, and are widely used in vacuum equipment for semiconductor manufacturing equipment, as well as in the aerospace and medical fields. Our company offers the following materials for bellows: TOKKIN 350, HC-22, HC-276, Alloy 625, SUS316L, SUS304L *For a detailed list of properties and more information, please refer to the related links or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Tokaroi Co., Ltd. Product Handling General Catalog

Tokaroi Co., Ltd. Product Handling General Catalog

We introduce various types of carbide materials for cutting tools and molds, as well as precision machined products.

At Tokaroi Co., Ltd., our comprehensive catalog of handled products introduces "carbide materials" that achieve rapid delivery and high reliability, as well as "precision machined products" that meet customer needs from design and prototyping to appropriate material selection based on drawings. Additionally, we feature "spray nozzles" such as flat spray nozzles and full cone spray nozzles, along with "major processing equipment" like lathes and machining centers. [Featured Products] [Precision Machined Products] - Carbide parts for precision molds - Precision steel products [Spray Nozzles] - Flat spray nozzles - Full cone spray nozzles, etc. For more details, please contact us or download the catalog.

  • alloy
  • Processing Contract
  • nozzle
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Can you tell the difference? The difference between copper and bronze.

Can you tell the difference? The difference between copper and bronze.

Each metal has its own characteristics and properties! Let's understand the differences correctly.

Copper is commonly used in everyday cooking utensils and electronic device components, making it a relatively familiar metal. However, most people may not fully understand the exact scope of the metal known as "copper." This is because some may not recognize the difference between "copper" and "bronze," leading to confusion. For example, "Bronze" is the English translation of bronze, but many people might think that bronze equals copper. In this blog, we will introduce the differences between copper and bronze and explain the characteristics of each. [Contents] ■ The English word for copper is "Copper," not "Bronze" ■ Characteristics of copper and bronze - Characteristics of copper - Characteristics of bronze: tin bronze, zinc bronze, aluminum bronze ■ Which has higher value, copper or bronze? ■ Why is a bronze medal called bronze? ■ Summary *You can view the detailed content of the blog through the related links. For more information, please feel free to contact us.

  • Processing Contract
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
We accommodate contract melting of small quantities of special alloys!

We accommodate contract melting of small quantities of special alloys!

Do you have any troubles like this? The metal material you have been using has become difficult to obtain because the existing manufacturer has stopped production...

We apply the manufacturing technology of our product COBARION to offer contract melting of special alloys. We provide integrated production from melting to forging and rolling, and we are also capable of small-scale prototype development. Vacuum melting starts from the formulation of raw materials. Leveraging this strength, we can produce "customer-customized alloys" and support various research and development through metal material prototyping. 【Features】 ■ Capable of manufacturing "customer-customized metal materials" through metal melting ■ Skilled in controlling trace element composition ■ Ingots available in minimum weights of 6kg, 15kg, 30kg, 36kg, and 100kg ■ Can also accommodate subsequent plastic processing (homogenization heat treatment, hot forging, rolling, etc.) ■ We accept contract processing for hot forging and hot rolling as well. ■ We focus on short delivery times. *For more details, please download the PDF or feel free to contact us.

  • alloy
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Q&A about Copper: Corrosion Resistance and Durability

Q&A about Copper: Corrosion Resistance and Durability

Introducing a Q&A on corrosion resistance against copper corrosion substances, potential corrosion, and ant nest-like corrosion!

The Japan Copper Center's website features a Q&A section regarding "corrosion resistance and durability" of copper. It introduces topics such as "the corrosion resistance of brass (C3604B) to CO, CO2, NOx, and C3H8," and "the extent of galvanic corrosion that occurs when dissimilar metals are in close proximity." Additionally, it provides answers on topics like "the potential for corrosion due to the potential difference between copper and stainless steel" and "measures to prevent pitting corrosion in heat exchangers." [Excerpt of Q&A] ■ Is there a list of corrosion resistance substances for copper? ■ Does galvanic corrosion occur if the same copper alloy is made using different methods? ■ Is copper piping unsuitable for water that generally contains high levels of sulfate ions and chloride ions? ■ Is there a possibility of corrosion due to the potential difference between copper and stainless steel? ■ What is the expected lifespan of copper pipes used in water supply lines? *For more details, please feel free to contact us.

  • Other metal materials
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Longer lifespan of heat-resistant components made of stellite alloy for the paper industry

Longer lifespan of heat-resistant components made of stellite alloy for the paper industry

A stellite alloy with excellent heat resistance and wear resistance, aimed at improving the operational efficiency of paper manufacturing equipment.

In the paper industry, stable operation of equipment under high-temperature conditions is required. In particular, parts of the paper machine that require heat resistance and wear resistance are inevitably subject to deterioration due to wear and corrosion, necessitating regular replacement and maintenance. This can lead to decreased production efficiency and increased costs. Our stellite alloy excels in heat resistance and wear resistance, addressing these challenges. 【Application Scenarios】 - Components of paper machines - Drying rolls - Other parts used in high-temperature environments 【Benefits of Implementation】 - Extended lifespan of components - Reduced maintenance frequency - Improved production efficiency - Cost reduction

  • 20251210_101641.jpg
  • 溶接材料・STL-1G.jpg
  • 溶接材料・STL-2G.jpg
  • 溶接材料・STL-3G.jpg
  • 溶接材料・STL-21G.jpg
  • Rare metals
  • alloy

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to alloy

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.