coating - メーカー・企業574社の業務用製品ランキング

[Free Offer] Innovative Silicone Coating for Tackiness Solutions in Products

Experience the "innovative silicone coating" designed to tackle sticky, unmanageable surfaces that cannot be handled with Teflon coating!

For preventing the sticking of sticky adhesive substances, which does not work well with Teflon coatings or fluororesin coatings, the following general measures have been taken, but there are limitations. ≫ Silicone release agents These are spray-type agents that can be easily applied by on-site workers and are familiar as release agents for resin molding. → However, they lack durability in their effectiveness, requiring frequent reapplication, and when wiped off with solvents for cleaning, the release agent is also removed. ≫ Surface roughening (physically reducing contact area) By making the surface of the components uneven, it becomes less likely for things to stick. There are many examples where combining this with Teflon coatings enhances effectiveness. → However, there are concerns about the risk of defective products due to the uneven shape being transferred to the product, and the difficulty of wiping or cleaning during maintenance due to the roughness. Our company has further evolved a smooth silicone coating that is effective against sticky adhesive substances and allows for solvent cleaning, tailored to the "troubles" faced on-site. We are currently offering a "feel the effect kit" for free! The "experience kit" can be requested from the official Yoshida SKT website.

企業：吉田ＳＫＴ
価格：Other

Bag making machine/slitter
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

"Bi-Coat" with durability that surpasses fluororesin coatings.

For those troubled by peeling and wear of fluororesin coatings, we are currently offering free samples of 'Bicoat(R)', which excels in high hardness, wear resistance, release properties, and slip characteristics.

Do you have any concerns or requests regarding coatings for "preventing sticking" and "improving sliding"? - "Worried about coating deterioration or peeling" - "Want to extend the period until reprocessing" In production environments, there is always a demand for "damage-free" coatings. Bycoat® is a coating that pursues a balance of [durability and strength] and [anti-sticking and sliding effects]. [Purpose] To reduce the possibility of troubles such as "function degradation, foreign matter contamination, and defects caused by coating scratches and peeling," which can lead to decreased production efficiency. [Examples of Use] - Conveyance guides Provides sliding properties to prevent clogging of conveyed items. Reduces the risk of coating peeling and foreign matter contamination. - Heat seal type (sealer) Prevents sticking of the sealing member that presses the film with heat and coating peeling. - Molding type Contributes to improved release properties of resin product molds. Maintains dimensional accuracy, allows for low-temperature processing, and preserves mold quality. We are currently offering a free "Bycoat® Experience Kit." Please try the anti-sticking and sliding properties with actual materials. ▼ You can apply for the "Experience Kit" from the official Yoshida SKT website below.

企業：吉田ＳＫＴ
価格：Other

Other Auto Parts
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Presentation of Case Studies: Improve Conveying Equipment with Anti-Sticking Coating!

Waste hidden in conveying devices and processes. With convex coating, why not start improvements now for "profit enhancement" and "productivity increase"?

The unique convex coating technology of Yoshida SKT, which excels in "anti-sticking and slip resistance," will improve your transportation processes and contribute to increased profitability. OLD NORMAL - Current Production Site - - It's just how things are - It's working without issues - Someone can handle it each time This common sense has taken root and is often overlooked. If we don't change this situation to a "New Normal," profitability will not improve! NEW NORMAL - Correct Approach - - Prepare and consider measures before problems arise - Promote labor-saving, cleanliness, and automation through robotics - Reduce indirect work and allow workers to focus on their core tasks Yoshida SKT's convex coating will assist in transitioning to the New Normal in transportation! 1. What Makes Yoshida SKT's Convex Coating Different It can control a rich variety of convex formations according to conditions, ensuring a high level of improvement. 2. We Have Improvement Case Studies We have a proven track record with various transportation materials, improving diverse transportation troubles such as adhesives and rubber products. [We offer a collection of case studies on process improvements through coating] If you are interested, please request the "trial set" through the related link!

企業：吉田ＳＫＴ
価格：Other

Conveyor
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Proposal for Coating Selection: "Coating Performance Measurement Service" *Materials Available

To meet the need of wanting to confirm the effectiveness before coating, Yoshida SKT measures the coating surface with its unique know-how.

"I want to test the effectiveness of coatings using materials produced in-house in advance." "I am considering introducing coatings but am struggling with how to select them." To address these concerns, we propose measuring coating performance using our unique know-how, allowing for a comparative review before introducing coatings. Please feel free to consult us about preparing sample pieces. - Do you have any of these issues? During resin molding, resin sticks to molds or extruders, causing problems. After researching, I found that surface treatment is an effective measure to prevent sticking, but there are various types of resins and additives depending on the product, and I don't know which surface treatment to choose. - With our coating performance measurement service, you can use the materials you are currently using to check the adhesion with the coating, facilitating smooth real machine testing. ■ Measurement of Release Force of Melted Resin Pellets We measure the release force between melted resin pellets and the coated surface, allowing you to confirm the degree of peeling from the coating numerically. *For applications and to download materials, please visit the official Yoshida SKT website below.

企業：吉田ＳＫＴ
価格：Other

Contract measurement
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What are the differences between fluoropolymer coatings: PTFE, PFA, and FEP?

We will introduce the differences between fluoropolymer PTFE, PFA, and FEP.

Differences in Types and Characteristics of Representative Resins for Teflon Coating and Fluororesin Coating ■ Resin Name PTFE (Polytetrafluoroethylene) ■ Characteristics It has the highest continuous use temperature of 260°C, and in addition to heat resistance, it excels in non-stick and low friction properties. ■ Alternative Name Tetrafluoroethylene, 4F ■ Resin Name PFA (Perfluoroalkoxyalkane Polymer) ■ Characteristics An improved resin of PTFE, it has the same continuous use temperature of 260°C as PTFE. It has a low thermal melt viscosity, allowing for a continuous coating with fewer pinholes that could not be achieved with PTFE, making it the best-performing fluororesin for corrosion-resistant coatings. Additionally, PFA is superior in non-stick properties compared to PTFE for certain applications, making it suitable for high-temperature release coatings. ■ Resin Name FEP (Perfluoroethylene Propylene Copolymer) ■ Characteristics An improved resin of PTFE, but with lower heat resistance than PTFE. It can achieve a smooth coating with fewer pinholes through firing. ■ Alternative Name 4F6F, Tetra-hexafluoride

企業：吉田ＳＫＴ
価格：Other

Secondary Cells/Batteries
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Case Study of Blade Surface Treatment] Thin Film Coating: Swiftly Resolving Blade Adhesion Issues

We propose a release coating that does not compromise the sharpness of cutting tools! We are currently offering a collection of case studies on solving adhesive problems with coatings.

We would like to introduce a case where the adhesion of adhesive from packaging film to cutter blades was prevented. ■Concern In a certain packaging process, during actual production, packaging film with adhesive would stick to the cutter blades, causing cutting issues and misalignment, which frequently led to line stoppages. As a result, we were unable to achieve the production quantities calculated from the takt time. ■Effect of Coating We adopted our product "MRS-003." This allowed us to keep the processing temperature below 250°C, eliminating concerns about blade blunting. Additionally, due to the thin film of just 1 micron, the sharpness of the blade edge was maintained. 【Key Points】 ■Purpose of Surface Treatment: Quality and operational stability, speed enhancement, compliance with safety and environmental requirements ■Required Functions: Non-stick and release properties, long lifespan ■Adopted Treatment: MRS-003 *We are currently offering examples of improvements in adhesive troubles with cutting tools and processes. For more details, please visit the official Yoshida SKT website or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Processing Contract
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Water-repellent and oil-repellent thin film fluorine coating 'TC-10S'

Ultra-thin film coating "Nanoprocess TC-10S" with excellent precision, visible light transmittance, water repellency, and oil repellency.

The "Nano Process TC-10S" enables ultra-thin functional coatings of less than 100μm, excelling in precision, visible light transmittance, water repellency, and oil repellency. It maintains optical properties with minimal dimensional changes, making it suitable for applications in "precision parts" and fields requiring high dimensional and surface accuracy, where fluororesin coatings have previously been challenging. <Application Examples> - Sealing and water-repellent treatment for electronic devices and components - Water repellency for optical lenses - Anti-fogging through hydrophilization of glass - Oil diffusion prevention for bearing components, etc. Additionally, Nano Process has been renewed with three other new functionalities, each with distinct features and applications. <Features of Each Series> ■ TLS Series Excellent non-adhesiveness compared to adhesive materials like tape ■ NCFPC Series Superior liquid repellency for water and oil ■ HP Series Excellent hydrophilicity Currently, we are offering technical materials summarizing the details of each series. If you are interested in more details or are facing challenges with surface treatment in precision fields, please download the materials or contact us directly.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

For those unsure about choosing surface treatment: Release and non-stick coatings *Materials available

Release properties are necessary. I want to reduce adhesion. I want to save on cleaning effort. It effectively meets all your requests! We introduce a surface treatment that excels in release and non-stick properties.

"Non-stick" refers to a property that makes it easy to release from strongly adhesive materials, meaning it either does not adhere or adheres with difficulty. Utilizing non-stick properties, we introduce surface treatments (coatings) that are effective for release applications, applications where adhesion needs to be minimized, and for simplifying cleaning. [Surface treatments chosen for non-stick and release purposes (partial list)] ■ Non-stick, lubricity, heat and cold resistance, chemical resistance, water and oil repellency, electrical properties 'Teflon (TM) fluoropolymer coating' ■ Release properties, high hardness, dimensional stability, lubricity, wear resistance 'Bicoat (R)' ■ Prevention of adhesion of highly adhesive materials 'Adhesive release coating series' 'MRS coating' (silicone-based coating) ■ Release of molten resin at high temperatures 'FSR coating' *For more details, please click to download the PDF or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Processing Contract
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluororesin coating "Types suitable for applications"

What types of fluororesins are suitable for applications such as non-adhesiveness, slip properties, and corrosion resistance? It is necessary to consider the characteristics and properties of the resin, as well as the selection of processing methods.

**Representative Types** ■ PTFE (Polytetrafluoroethylene) It has the highest continuous use temperature of 260°C and excels in non-stick and low friction properties. ■ PFA (Perfluoroalkoxyalkane Polymer) It has a low melt viscosity and can achieve a continuous coating with fewer pinholes than PTFE. It is the best-performing fluororesin for high-temperature corrosion resistance. ■ FEP (Perfluoroethylene Propylene Copolymer) An improved resin of PTFE, it has a lower continuous use temperature than PTFE but can achieve a smooth coating with fewer pinholes through sintering. ■ ETFE (Ethylene-Tetrafluoroethylene Copolymer) Due to its excellent mechanical properties, it is highly resistant to wear and is often used for anti-corrosion applications. ■ Modified Types ◎ High-temperature modified type ◎ Low-temperature modified type **Representative Processing Methods** ○ The enamel of fluororesin is applied using a painting machine or manually. ○ Fluororesin powder is applied using electrostatic or special painting machines. Coating processing is easily adaptable to complex shapes and is used in numerous industries. *For more details, please download the PDF and take a look.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Teflon coating "Quality inspection by licensed processing manufacturers"

To use Teflon coating for a long time, not only selection and processing technology are important, but also quality inspection. Here we introduce Yoshida SKT's quality inspection.

Here, we introduce part of the quality inspection for Teflon coating. ■ Product Inspection We verify whether the product meets the meeting notes and order specifications based on the meeting minutes, drawings, and individual items. ■ Coating Appearance Inspection The processed coating is visually observed under diffuse daylight (equivalent). In principle, any detection of blisters, cracks, peeling (including interlayer peeling), substrate exposure, or transparency will result in a failure. ■ Film Thickness Measurement Inspection Film thickness refers to the thickness of the processed coating measured using a thickness gauge adjusted based on the substrate board and a standard board placed on top. ■ Pin Hole Inspection Pinholes are a general term for tiny defects that can potentially be detected electrically. However, it typically refers to one type of tiny defect, specifically holes that resemble those made by a needle, found in the remnants of bubbles. *Inspection items may vary depending on the coating specifications. Please contact us for more details.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Surface Treatment Case] Protecting Robots from Corrosion with Fluorine-based Corrosion-resistant Coating

What are the methods to enable robots to exist in harsh environments? We will introduce surface treatments (coatings) that implement corrosion prevention measures such as robot covers.

■Sites Requiring Surface Treatment - Environments where corrosion of robot arm covers is a concern - Sterilization environments using UV - Environments requiring cleanability ■Points of Innovation - By applying a corrosion-resistant coating to robot arm covers, we protect the metal from many acids, alkalis, solvents, and other chemicals. - The surface is resistant to degradation even in special environments such as UV, making it suitable for protecting robots. - It offers superior cleanability compared to metal, allowing for safe use even in conditions where food may adhere and create a breeding ground for bacteria. - It enhances efficiency in sites where "environment" and "atmosphere" have been bottlenecks, raising concerns about equipment deterioration. ■Examples of Coatings for Improving Robot Transport Adhesion Issues - Teflon Coating (Fluororesin Coating) - Antistatic Fluororesin Coating "Safron" - Antistatic Fluororesin Coating "Safron AP+" - Organic-Inorganic Composite Coating "Cerashield" - Fluorine-based Room Temperature Coating "Cerashield F" *For more details, please download the PDF or feel free to contact us.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Data Presentation] Super Engineering Plastics Property List

Presentation of a list of characteristics for PTFE, PFA, FEP, PCTFE, ETFE, ECTFE, PVDF, PBI, PEEK, PAI, PES, and PPS.

【Super Engineering Plastic Properties Documentation】 ■PTFE (Polytetrafluoroethylene) ■PFA (Tetrafluoroethylene-Perfluorovinyl Ether Copolymer) ■FEP (Tetrafluoroethylene-Hexafluoropropylene Copolymer) ■PCTFE (Chlorotrifluoroethylene Homopolymer) ■ETFE (Tetrafluoroethylene-Ethylene Copolymer) ■ECTFE (Chlorotrifluoroethylene-Ethylene Copolymer) ■PVDF (Polyvinylidene Fluoride Homopolymer) ■PBI (Polybenzimidazole) ■PEEK (Polyether Ether Ketone) ■PI (Polyimide) ■PAI (Polyamide Imide) ■PES (Polyether Sulfone) ■PPS (Polyphenylene Sulfide) *For more details, please download the PDF and refer to it. The property tables are for general characteristics and do not guarantee the physical properties by our company. Thank you for your understanding in advance.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Surface Treatment Solution Case] Release of UV-curable resin with a 1μm thin film surface treatment!

Achieving adhesion prevention for UV-curable resin used in display panel sealing! Ultra-thin film surface treatment 'Nano Process(R)'

■Concerns In the process of manufacturing display panels for TVs and other devices, sealing is done using UV-curable resin. However, the adhesive resin tends to stick to the jigs, leading to an increased likelihood of product defects. ■Requests The standard Teflon™ anti-adhesion coating results in a film thickness of several tens of micrometers, which causes fine irregularities to be transferred to the resin, raising concerns about the impact on products requiring precision. Additionally, the 400°C heat treatment during coating can cause warping of the jigs, and the UV light necessary for curing the sealing resin can compromise the adhesion of the coating, making it unusable. ■Solution Coating NanoProcess® TLS-200 ■Problem Resolution - Significant reduction in product defects due to prevention of resin adhesion - Improved precision leading to longer lifespan of jigs - Increased production efficiency *For details on the effects and background of the solution, please download the PDF or contact us.*

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Experimental footage] Excellent coating properties with non-stick, slip resistance, and corrosion resistance.

We will introduce the surface treatment functions provided by Yoshida SKT in an experimental video. The video explains the non-stick, slip, and corrosion resistance features in about 7 minutes.

Yoshida SKT responds to customer needs by providing surface treatment functions. - Non-stick (function to reduce sticking) Video playback: 0:00 - (For those in a hurry, please start playback from this time) - Low friction (function to enhance slipperiness) Video playback: 2:33 - (For those in a hurry, please start playback from this time) - Corrosion resistance (function to reduce corrosion) Video playback: 4:42 - (For those in a hurry, please start playback from this time) These are introduced through easy-to-understand experimental videos. With Yoshida SKT, we can accommodate a wide variety of substrates and offer suggestions from hundreds of types of coating materials. This broadens the range of coatings that customers can choose from. In addition to functions such as "reducing adhesion of sticky substances" and "improving slipperiness," we also respond meticulously to the varying needs and environments of each customer, such as "requiring precision" or "requiring heat resistance," to achieve reliable effects.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

You can verify the coating performance! Quantifying the adhesion of adhesive tape.

"We want to confirm the effectiveness of the coating in advance." To meet such needs, Yoshida SKT also offers measurements of the coated surface.

The coating performance measurement service is for those who want to test the effectiveness of coatings using materials produced in-house, or for those considering the introduction of coatings but struggling with the selection process. At Yoshida SKT, we propose five unique measurement methods for coating performance, which can be difficult to quantify. Please feel free to consult us about preparing sample pieces. = Are you facing any of these issues? = You want to test coatings to prevent labels from sticking to temporary placement platforms or chuck claws in equipment that transports labels and tapes. However, you are unsure about the degree of adhesion between the labels or tapes you use and the coatings, making it difficult to proceed with improvements. In the [Tape Release Force Measurement], you can confirm the degree of peeling by applying adhesive tape to the coated surface and measuring the force required to peel it off. Yoshida SKT's coating performance measurement service allows you to smoothly conduct practical tests by checking the adhesion between the coatings and the materials you use. We also introduce four other measurement methods tailored to your conditions. ▼ For more details, please visit our website ▼

企業：吉田ＳＫＴ
価格：Other

Resist Device
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Automotive Industry Case Study] Release Properties + Wear Resistance + Image Recognition Properties 'Bicoat'

Improving production efficiency on the electronic components production line! We will introduce a case where the adoption of surface treatment has achieved prevention of adhesion to the suction fixtures.

We will introduce a case study of trouble resolution on the transport line for electronic components sealed with resin. ■Issue The electronic components sealed with resin are suctioned by a jig and transported and placed on the substrate. However, there were instances where the slightly adhesive sealing resin would stick to the jig, negatively affecting the yield. ■Request Since the suction jig performs suction, transport, and placement operations tens of thousands of times per hour, high wear resistance was required. Additionally, an image recognition camera is used to confirm the position of the components on this line, so it was necessary to use a color that minimizes reflection to prevent whiteout in the images. ■Adopted Surface Treatment - Bycoat® NYK-01BK ■Background and Effects of Adoption 'Bycoat' was considered for preventing the sticking of the sealing resin and for its wear resistance. After evaluation on actual equipment, it was found to have good wear resistance as well as excellent release properties for the resin. 【Resolved Issues】 - Reduced sticking issues with the resin - Decreased cleaning costs - Improved productivity *For more details, please download the PDF or contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Automotive Industry Case] Non-stick coating to prevent label adhesion

A must-see for those struggling with sticking! Silicone-free, with a convex coating that peels off easily. We will introduce a case study on the product label application process.

We would like to introduce an improvement case of an automatic label application device using robots. ■Issues In the label application process using robots, the labels peeled off from the release paper are placed adhesive side down on a platform, from which the robot picks them up and applies them to the products. However, there were frequent troubles where the robot could not smoothly peel the labels from the platform, causing work stoppages. ■Requests Initially, we tried a silicone coating with excellent release properties, but the silicone transferred to the labels, reducing their adhesive strength, which led to the labels peeling off after being applied to the products. Additionally, the conventional Teflon™ coating did not sufficiently prevent the labels from sticking. To solve this, it was necessary to achieve both excellent release properties and silicone-free performance. 【Issues to be resolved】 - Label peeling due to silicone transfer - Cleaning time for label adhesive - Line stoppage troubles due to sticking ■Adopted Coating 'Super TP 250 UNDER' *For more details, please download the PDF or contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Data Download] Surface Treatment "By Application" Chosen in the Semiconductor and Electronics Field

Coatings with anti-static properties, heat resistance, chemical resistance, and chemical inertness are widely used in semiconductor manufacturing equipment and electronic component manufacturing equipment.

■Applications such as plating jigs, soldering jigs, and semiconductor manufacturing lines - Selected surface treatment 'TEFLON (TM) fluororesin coating' ■Applications such as precision molds - Selected surface treatment 'Bicoat (R)' 'Nanoprocess (R)' ■Applications such as wafer and glass handling - Selected surface treatment 'Saflon (R)' 'PBI, PI coating' ■Applications such as precision nozzles, MEMS components, and optical lenses - Selected surface treatment 'Nanoprocess (R)' ■Applications such as chemical supply tanks - Selected surface treatment 'TEFLON (TM) fluororesin coating' 'Saflon (R) AP+' 'MY Lining (R)' ■Applications such as clean room walls, experimental equipment, and various tools - Selected surface treatment 'SeraShield F' ■Applications such as high-temperature equipment parts (rolls, heater covers) - Selected surface treatment 'SGN coating' *You can download the PDF of the surface treatment products introduced. For detailed product information, please visit the "Yoshida SKT Official Website."

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Surface treatments chosen for corrosion-resistant applications in the chemical industry *Product documentation available

In fields where chemical substances are used, surface treatments aimed at enhancing corrosion resistance are required. We introduce thick film coatings made from high-performance resins.

Typical corrosion-resistant materials include rubber, glass, and graphite products, but each has its drawbacks. ■ Disadvantages and Concerns - Rubber → Weak against heat and solvent-based substances - Glass lining → Weak against alkaline chemicals, thermal shock, and mechanical shock - Graphite products → Excellent acid resistance but weak against strong oxidizing acids (such as fuming sulfuric acid) ■ Materials that Address Disadvantages and Concerns From the above perspective, perfluoro-based fluoropolymers have few drawbacks, and in terms of chemical resistance, fluoropolymer coatings and linings can be used in a versatile manner. Applications such as tanks, piping, valves, and pumps ■ Selected Surface Treatments - Teflon(TM) Coating - Fluoropolymer Coating - SafeFlon(R) - SafeFlon(R) AP+ - MY Lining(R) Applications such as reaction vessels and acid storage tanks ■ Selected Surface Treatments - MY Lining(R) Applications such as dryers and centrifuges ■ Selected Surface Treatments - SafeFlon(R) - SafeFlon(R) AP+ *You can download the PDF introducing the surface treatment products.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Presentation of Materials: Selection of Surface Treatments Chosen in the Medical and Pharmaceutical Fields

Non-stick, sliding, and wear-resistant surface treatments for chutes, guides, and sealers are effective for speeding up pharmaceutical packaging machines and making them maintenance-free.

The production sites for medical and pharmaceutical products require not only high productivity but also very strict cleanliness standards. In pharmaceutical packaging machines, there is a demand for speed-up for efficiency and maintenance-free operation, leading to the adoption of Bicoat® and fluoropolymer coatings to improve non-stick properties, slip resistance, and wear resistance for guides and sealers. In tablet production lines, Bicoat® is used on tablet presses, hoppers, and guides to enhance the slip properties of tablets, contributing to quality improvement. Additionally, fluoropolymer coatings are used on stages, hot plates, and parts that come into contact with paraffin in pathology testing equipment. ■ Applications for medical drip fusion sealers, pathology testing equipment, etc. - Selected surface treatments: 'Fluoropolymer coating', 'Bicoat®' ■ Applications for tanks, material supply machines, chutes, etc. - Selected surface treatments: 'Urethane coating', 'Saflon® AP+' ■ Applications for centrifuges, etc. - Selected surface treatments: 'Saflon® AP+' ■ Applications for adhesive drugs and tape transport fixtures, etc. - Selected surface treatments: 'TP series, CTT series, Super Alloy, CAT, CMT'

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluororesin Coating: "What is the relationship between non-stick properties and water repellency?"

[Function Explanation] Understanding the mechanism of adhesion reveals the best release and surface treatment! Surface energy and water repellency | What is the relationship between non-stickiness and water repellency?

Why does fluoropolymer coating repel water? We will introduce the relationship between surface energy, non-stick properties, and water repellency. ■ The relationship between water droplets and surface energy The reason the surface of fluoropolymer coating repels water is that the surface tension of water acts strongly. The same principle applies to sticky substances. In other words, "difficult to wet = difficult to stick." The action of liquid surface tension is strongly related to the surface free energy of solids. Surface free energy is the force that tries to attract the molecules of the contacting counterpart. Water is a substance with higher surface tension compared to oil. When in contact with a solid that has the same surface free energy, oil tends to spread and wet more easily, while water tends to bead up and is harder to wet. The smaller the surface free energy of the solid compared to the liquid it contacts, and the greater the difference, the more difficult it becomes for the liquid to wet (stick). The surface of fluoropolymer coating has very low surface free energy, which allows it to repel not only water but also oil, making it an effective surface treatment for release purposes due to its low tendency to stick. For more details, please check the official Yoshida SKT website from the link below.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Presentation of Materials] List of Surface Treatments Selected for Food Factories by Application

Surface treatment that enables automation, labor-saving, and robotization of food factory lines. Contributes to speed-up and maintenance-free operation!

■Applications for automatic rice cooking lines, kneaders, rolls, baking molds, etc. - Selected surface treatments 'Teflon(TM) coating (fluororesin coating)' 'MRS coating (silicone-based coating)' ■Applications for packaging machine blades, tape feeding rolls, etc. - Selected surface treatments 'MRS coating (silicone-based coating)' 'Bicoat(R)' ■Applications for packaging machine guides, buckets, sealers, etc. - Selected surface treatments 'Bicoat(R)' 'Bicoat(R) Exceed' ■Applications for cutters, arms, claws, etc. - Selected surface treatments 'Nanoprocess(R)' ■Applications for confectionery molding molds, rice serving machines, food transport sections, lightweight cups, etc. - Selected surface treatments 'TP coating, Super TP coating' 'MRS coating' ■Applications for baking molds, baking sheets (to prevent sticking during food baking), etc. - Selected surface treatments 'Teflon fluororesin coating' ■Applications for rice shutters, etc. - Selected surface treatments 'CTT fabric sheet' *You can download the above surface treatment products in PDF format.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

For those unsure about choosing surface treatment: rust prevention, corrosion resistance, and protective coatings.

Fluororesin, which excels in chemical resistance among resins. It is ideal for protecting the substrate from corrosion! It is also an extremely low water-absorbent material. *Product information available.

Coatings that excel in rust prevention, corrosion resistance, and anti-corrosion properties are surface treatments designed to prevent deterioration or alteration caused by chemical agents (chemical resistance) and to provide a function that protects against dirt by making it difficult for water to penetrate. Fluororesin, which has excellent chemical resistance due to its structure, possesses extremely high chemical resistance against most acids, alkalis, and organic solvents, and is also a material with very low water absorption. Therefore, fluororesin coatings are suitable for protecting substrates from corrosion caused by chemicals in a versatile manner. 【Selected Surface Treatments (Partial)】 ■ Chemical Resistance - Fluororesin Coating (Teflon Coating) ■ Chemical Resistance + Penetration Resistance - MY Lining(R) ■ Chemical Resistance + Static Electricity Prevention - Saflon(R) AP+ ■ Chemical Resistance + Room Temperature Processing - Cerashield - Cerashield F ■ Weather Resistance - Fluororesin Coating (Teflon Coating) - Cerashield F *For more details, please refer to the PDF document or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Processing Contract
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Fluororesin Coating "Functional Property Data"

Here is some reference data on the non-stick, water-repellent, heat-resistant, and slippery (low friction) properties of fluororesin.

■Non-stickiness: It refers to the property of being easily released from strongly adhesive substances, either not adhering at all or having a tendency to adhere less. ■Water repellency: It refers to the property of repelling liquids and not getting wet when they come into contact with the surface. 【Reference data for non-stickiness and water repellency】 ■Contact angle of water (°) PTFE ... 114 PFA ... 105-110 FEP ... 115 ETFE ... 96 ■Contact angle of n-HD (°) PTFE ... 34-45 PFA ... >45 FEP ... 41-45 ETFE ... 28 ■Surface free energy of solids (dyne/cm) PTFE ... 18.5 PFA ... 17.8 FEP ... 17.8 ETFE ... 22.1 ■Low friction: It has a slippery feel and a low coefficient of friction, providing excellent lubricity. 【Reference data for low friction】 ■Static friction coefficient (μ) PTFE ... 0.02-0.04 PFA ... 0.04-0.05 FEP ... 0.05-0.06 ETFE ... 0.07-0.08 *The values are general characteristics and are not guaranteed. *For more details, please contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

What does the model number of "Bicoat(R)" mean? | Yoshida SKT

We will answer questions from customers regarding the part numbers for Yoshida SKT's original surface treatment "Bicoat(R)."

Baicoat offers a variety of product numbers through a combination of inorganic and organic surface treatment technologies. We received an inquiry from a customer regarding product numbers, so we would like to introduce it. ■Customer Inquiry I would like to know the meaning of the alphabet letters at the beginning of the Baicoat® series. For example, what does "NYK" in "NYK-01" mean? What does 01 represent? ■Our Response "NYK-01" is our specification product number. The first three alphabet letters indicate the type of inorganic surface treatment. "NYK" represents the NYK series, which refers to nickel-based metal coatings. The last two digits indicate the type of organic surface treatment. 01 represents the 01 series, which refers to fluorine-based treatment. *For more details, please download the catalog in PDF format or contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

Non-stick coating "MRS Coating"

The silicone-based non-stick coating "MRS Coating" allows for easy peeling, just like adhesive tape or seals.

"MRS Coating" (Mold Release Silicone) is a non-stick coating that has features not found in conventional silicone coatings. [Features] - Non-stick (release) + solvent resistance → MRS-102 - Non-stick (release) + film hardness (9H) → MRS-014 - Non-stick (release) + heat resistance (300℃) → MRS-004 - Non-stick (release) + low-temperature processability (below 80℃) → MRS-200 - Non-stick (release) + slip properties → MRS-003 Additionally, the smooth surface makes it easy to wipe off dirt, and even when cleaned with solvents, the release properties remain largely unchanged depending on the grade. *Based on our tests. *Features vary by product type. *For more details, please click "PDF Download" or feel free to contact us.

企業：吉田ＳＫＴ
価格：Other

Surface treatment contract service
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Free Giveaway] Non-Stick Coating | Prevent Blade Troubles in Production Equipment!

Problems with blades that occur in production equipment for cutting adhesive films and adhesive tapes can be solved with a non-stick coating for the blades.

Are there any issues with adhesive sticking to the "cutting blades" or "cutter blades" of production equipment and packaging machines, impairing cutting performance or contaminating products? If cutting tools are used on sticky materials or items with adhesive, failing to implement "anti-adhesion measures" can negatively impact profits. Yoshida SKT offers coatings that can solve such problems. ■ Examples of solutions with blade coatings: - Cutting of resin packaging films - Punching of urethane rubber - Continuous cutting of product packages - Prevention of adhesion during adhesive tape cutting ▼ Click here to learn about surface treatments (coatings) that improve the cutting process ▼

企業：吉田ＳＫＴ
価格：Other

Processing Contract
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Electronics Industry Improvement Case] Enabling Continuous Cutting of Adhesive Packages!

Achieve continuous cutting of adhesive-backed packages with thin film coating! The excellent non-adhesiveness of the thin film coating maintains the sharpness of the blades.

We would like to introduce a case where we achieved prevention of adhesive residue on cutting blades when disposing of adhesive-laden packages. ■ Background of Surface Treatment Consideration In the device that removes products from the package, a mechanism was needed to automatically cut and dispose of adhesive-laden packages into smaller pieces. ■ What We Wanted to Achieve The device operates unmanned, with human intervention only required when the finely cut packages fill the dust box. Therefore, it was essential to prevent the adhesive from sticking to the cutting blades, allowing for maintenance-free operation. ■ Conditions for Selecting Treatment Initially, a fluororesin coating, effective in preventing adhesive residue, was selected and tested. However, the thickness of the fluororesin coating, approximately 30μm, caused a decrease in the sharpness of the blades. As a solution, we polished the coating only on the cutting edge and conducted retesting, but this resulted in the cutting edge being uncoated, leading to adhesive sticking. Continuous cutting of packages became impossible. ■ Adopted Coating 'MRS Coating' ▼ We are currently offering a free collection of improvement case studies and a coating trial set! ▼

企業：吉田ＳＫＴ
価格：Other

Other packaging machines
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

[Case Study on Surface Treatment] Non-Stick Coating for Rubber Punching Blades *Materials Available

Prevent line stoppage of cutting tools for urethane rubber products. Improve production efficiency by solving adhesion issues with a thin film coating on the cutting blades.

■Concern We received a consultation regarding a problem where a blade used to punch out polyurethane rubber shapes causes the device to stop due to fragments of polyurethane rubber sticking to the blade. Upon checking, we found that the device sometimes stops on the first shot, significantly reducing the production efficiency of the product. ■Background In the case of punching blades, both release properties to prevent polyurethane rubber from sticking to the blade and slip properties to cut through the rubber without resistance when the blade is pressed into the rubber are necessary. The customer considered a fluororesin coating that excels in both release and slip properties and contacted us. ■Conditions for Choosing Treatment During the hearing, we understood that maintaining the sharpness of the blade edge is necessary for the punching blade to maintain the product shape, and that this is difficult to achieve with a fluororesin coating. We also learned that the customer has been achieving results with silicone release agents as an improvement measure. ■Adopted Coating 'MRS-014' ▼ We are currently offering a free collection of case studies on blade improvements in cutting processes and a trial set! ▼

企業：吉田ＳＫＴ
価格：Other

Other packaging machines
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

For applications that cannot be satisfied with fluorine or silicone! Non-stick coating.

Experience excellent non-stick properties for applications that cannot be satisfied with Teflon or silicone coatings! Anti-stick coating.

To prevent adhesion of sticky substances, fluoropolymer coatings (Teflon™ coatings) and silicone coatings are commonly used, but the following challenges may arise: [Challenge 1] Even with surface treatments claiming to prevent sticking, there was not much change. [Challenge 2] It started sticking unexpectedly quickly during use. [Challenge 3] Silicone coating transfers and causes defects in the bonding process (fluoropolymer did not provide sufficient effectiveness, leading to the choice of silicone). Recently, there has been an increase in customers needing solutions for more adhesive materials, such as wanting to release molten resins that do not fully solidify to shorten processing time. "Yoshida SKT has coatings that can improve such situations." With general fluoropolymer coatings, sticky substances can adhere due to various factors. In response, treatments that create a rough surface to reduce the contact area with sticky substances are known. Our company has a unique technology to create convex surfaces using fluoropolymer and is now offering a kit to experience its effects for free! ▼ You can apply from the official Yoshida SKT website below.

企業：吉田ＳＫＴ
価格：Other

Other conveying machines
coating

ブックマークに追加いたしました

ブックマーク一覧

ブックマークを削除いたしました

ブックマーク一覧

これ以上ブックマークできません

会員登録すると、ブックマークできる件数が増えて、ラベルをつけて整理することもできます

無料会員登録

coating - メーカー・企業574社の業務用製品ランキング | イプロスものづくり

coatingのメーカー・企業ランキング

coatingの製品ランキング

coatingの製品一覧

[Free Offer] Innovative Silicone Coating for Tackiness Solutions in Products

"Bi-Coat" with durability that surpasses fluororesin coatings.

Presentation of Case Studies: Improve Conveying Equipment with Anti-Sticking Coating!

Proposal for Coating Selection: "Coating Performance Measurement Service" *Materials Available

What are the differences between fluoropolymer coatings: PTFE, PFA, and FEP?

[Case Study of Blade Surface Treatment] Thin Film Coating: Swiftly Resolving Blade Adhesion Issues

Water-repellent and oil-repellent thin film fluorine coating 'TC-10S'

For those unsure about choosing surface treatment: Release and non-stick coatings *Materials available

Fluororesin coating "Types suitable for applications"

Teflon coating "Quality inspection by licensed processing manufacturers"

[Surface Treatment Case] Protecting Robots from Corrosion with Fluorine-based Corrosion-resistant Coating

[Data Presentation] Super Engineering Plastics Property List

[Surface Treatment Solution Case] Release of UV-curable resin with a 1μm thin film surface treatment!

[Experimental footage] Excellent coating properties with non-stick, slip resistance, and corrosion resistance.

You can verify the coating performance! Quantifying the adhesion of adhesive tape.

[Automotive Industry Case Study] Release Properties + Wear Resistance + Image Recognition Properties 'Bicoat'

[Automotive Industry Case] Non-stick coating to prevent label adhesion

[Data Download] Surface Treatment "By Application" Chosen in the Semiconductor and Electronics Field

Surface treatments chosen for corrosion-resistant applications in the chemical industry *Product documentation available

Presentation of Materials: Selection of Surface Treatments Chosen in the Medical and Pharmaceutical Fields

Fluororesin Coating: "What is the relationship between non-stick properties and water repellency?"

[Presentation of Materials] List of Surface Treatments Selected for Food Factories by Application

For those unsure about choosing surface treatment: rust prevention, corrosion resistance, and protective coatings.

Fluororesin Coating "Functional Property Data"

What does the model number of "Bicoat(R)" mean? | Yoshida SKT

Non-stick coating "MRS Coating"

[Free Giveaway] Non-Stick Coating | Prevent Blade Troubles in Production Equipment!

[Electronics Industry Improvement Case] Enabling Continuous Cutting of Adhesive Packages!

[Case Study on Surface Treatment] Non-Stick Coating for Rubber Punching Blades *Materials Available

For applications that cannot be satisfied with fluorine or silicone! Non-stick coating.

coatingに関連する検索キーワード