Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Nov 12, 2025～Dec 09, 2025
This ranking is based on the number of page views on our site.
601～615 item / All 661 items
Ducts made of metal need to be sealed with gaskets. If neoprene rubber is in stock, gaskets can be produced quickly.
We will simultaneously punch holes for bolts along with the inner and outer diameter shapes. We always have CR rubber in stock and can quickly proceed from mold production. We also accept processing for joint sheets and other materials besides rubber.
Excellent corrosion resistance made possible by years of anti-corrosion technology achievements! Suitable for applications related to electrolytic equipment with low Ca and Mg.
The "Aladdin Gasket" is a product that has excellent corrosion resistance, particularly against hydrochloric acid. Its outstanding corrosion resistance is made possible by years of anti-corrosion technology achievements. Through a special formulation, it achieves superior corrosion resistance compared to conventional EPDM. With low Ca and Mg content, it is suitable for applications related to electrolytic equipment. The double protrusion ring structure further enhances sealing stability. A shape focused on practicality has been adopted. 【Features】 ■ Exhibits excellent corrosion resistance to hydrochloric acid ■ Specially formulated EPDM with low Ca and Mg content ■ Double O-ring structure ■ Material: Special EPDM *For more details, please refer to the PDF document or feel free to contact us.
Stop flange corrosion and damage! We provide impact resistance and corrosion resistance to piping assets!
Introducing the "Flange Bumper + Gasket" from Precision Piping Products (P3) in the United States. With excellent water and air tightness, it protects flanges from physical damage during manufacturing, on-site installation, and transportation/storage. Installation can be easily done using cable ties (weather-resistant and UV-resistant), bolts and nuts, or "P3 Multi-Nuts." 【Features】 ■ Cost-effective and lightweight ■ Capable of withstanding impacts far exceeding 4 tons ■ Reusable ■ No warping, bending, cracking, or moisture absorption ■ International shipping certification *For more details, please refer to the PDF document or feel free to contact us.
Prevention of flange surface damage during bolt testing! Easy to install and remove, and reusable!
Introducing the "Mock Gasket" from Precision Piping Products (P3) in the United States. It avoids pinch point hazards with a removal tab and protects the flange surface from physical damage. Additionally, it is possible to reduce the quantity of gaskets purchased. 【Features】 ■ Protects the flange surface from physical damage ■ Reduces the quantity of gaskets purchased ■ Reusable ■ Easy to store ■ Easy to install and remove ■ Avoids pinch point hazards with a removal tab *For more details, please refer to the PDF document or feel free to contact us.
We manufacture and sell a wide variety of gaskets and packing!
Our company manufactures and sells gaskets and packing. As our main products, we offer a lineup including the gasket "K101," which is made by applying heat-resistant rubber to SUS wire-reinforced glass cloth and processed into endless shapes to fit various manhole designs. Please feel free to consult us if you have any requests. 【Product Lineup】 ■K101: Manhole Gasket ■K102: Super Manhole Gasket ■K103: NA Manhole Gasket ■K104: NA Gasket Tape ■K106: NA Core Gasket ■K107: Naflon Manhole Gasket *For more details, please download the PDF or feel free to contact us.
Lightweight, low compression force with high shielding effect! Used for electromagnetic wave shielding of housing openings.
The "Excellent SGKH Series" is an EMI shielding gasket from Morimiya Electric Co., Ltd. that is environmentally friendly. It features high flame retardancy while being halogen-free. The core material is a flame-retardant polyurethane foam covered with a three-layer coated polyester woven fabric. 【Features】 ■ The core material is flame-retardant polyurethane foam covered with a three-layer coated polyester woven fabric. ■ Lightweight and low compression force provide high shielding effectiveness. ■ High flame retardancy while being halogen-free. *For more details, please refer to the PDF document or feel free to contact us.
From small lots to large quantities, we can produce in your preferred shape.
Our company manufactures packing and gaskets for various parts. Please feel free to consult us about the production of discontinued gaskets for motorcycles and automobiles. We have obtained ISO 9001 certification and have established a quality system to provide our products at appropriate prices. Please do not hesitate to contact us if you have any requests. 【Our Strengths】 ■ Capable of consistent finished product manufacturing ■ Quality and delivery management ■ Providing reliable products ■ Wide range of support from small lots to mass production *For more details, please download the PDF or feel free to contact us.
Manufacturing is possible from a minimum of 0.5mm to a maximum of 25mm! A complete range of products by gasket size and material is available.
The "SMT EMI Gasket (PCB Ground Pad)" is a product designed to reduce electromagnetic noise generated from within electronic devices and protect circuits from electrical surges. The SMF01 series is manufactured using a method that wraps PU sponge with a conductive metal film. It is very soft, so it exerts almost no stress on the PCB. The SMF02 series is a small SMT EMI gasket composed of a silicone rubber core and a conductive metal surface layer, suitable for small IT devices such as mobile phones. 【Features】 ■ The SMF01 series is suitable for medium to small sizes, while the SMF0 series is suitable for ultra-small sizes. ■ A variety of materials can be selected to match the characteristics of the device. ■ Excellent electrical conductivity (resistance below 0.1Ω) and compression recovery rate (over 90%). ■ A combination of product materials and shapes ensures adhesion and minimizes stress on the PCB. *For more details, please refer to the PDF document or feel free to contact us.
Heat-resistant polyurethane foam is applied as the core material! The recovery rate and adhesion strength have also improved, resulting in excellent heat transfer effects.
The "Thermal Form Gasket (TFG)" is a thermal conduction component that transmits heat from a heat source (circuit element) to a heat sink or metal plate in a short time, allowing for wide diffusion of heat and reducing the temperature of the heat source. It uses graphite, which has excellent horizontal thermal conductivity (400W/mk). There are no thickness constraints, which are a disadvantage of silicone pads, allowing for a wide range of applications. 【Features】 - No need for a heat sink for heat dissipation (direct contact with the case or frame for heat dissipation) - Both the surface and sides of the graphite are wrapped in PET film to prevent particles from the graphite from being generated - Excellent elasticity means that excessive pressure does not need to be applied to the PCB, preventing bending - Various sizes and shapes can be manufactured according to application, making it easy to adjust thermal performance and hardness *For more details, please refer to the PDF document or feel free to contact us.
![[Double D Type Gasket Case] Communication Box Enclosure for Special Equipment](https://image.mono.ipros.com/public/product/image/12f/2000669044/IPROS1297323940042463186.jpeg?w=280&h=280)
Domestic production compatible conductive, heat-resistant, and waterproof gaskets. Unique shape with two peaks for waterproofing + EMC measures! Proven track record in communication box enclosures for special equipment.
When using gaskets for the conventional purposes of waterproofing, dustproofing, and electromagnetic shielding, it was necessary to use one gasket for waterproofing and dustproofing, and one for electromagnetic shielding (a total of two gaskets). The Double D type has a double structure, allowing it to possess both electromagnetic shielding and waterproofing/dustproofing capabilities. This product enables efficient development and manufacturing with just one unit. Application: Communication box housing for special equipment Adopted product: Double D type ring processed product Reasons for adoption: 1. By accommodating "waterproof + conductivity" with a single product, it reduces component costs, management expenses, and man-hours. 2. High shielding effectiveness and waterproof performance. *For more details, please refer to the PDF document or feel free to contact us. *Samples are also available.
Domestic production compatible conductive, heat-resistant, and waterproof gaskets. Unique shape with two peaks for waterproofing and EMC measures! Proven track record in CATV equipment.
When using gaskets for the conventional purposes of waterproofing, dustproofing, and electromagnetic shielding, it was necessary to use one gasket for waterproofing and dustproofing, and one for electromagnetic shielding (a total of two gaskets). The Double D type has a double structure, allowing it to possess both electromagnetic shielding and waterproofing/dustproofing capabilities. This product enables efficient development and manufacturing with just one unit. Application: CATV equipment Adopted product: Double D type gasket Reason for adoption: 1. By addressing "waterproof + conductivity" with a single product, it reduces component costs, management expenses, and labor hours. 2. High shielding effectiveness. *For more details, please refer to the PDF document or feel free to contact us. *Samples are also available.
![[Noise Countermeasures] Catalog of related products such as gaskets and ferrite cores.](https://image.mono.ipros.com/public/product/image/aa0/2000545346/IPROS96049939628317437142.jpeg?w=280&h=280)
If you are having trouble selecting for filtering, grounding, shielding, or thermal measures, please take a look! Comprehensive catalog now available.
The way energy is utilized is gaining attention, and new electrical products such as solar panels and electric vehicles are continuously emerging in our lives. To ensure that these diverse electrical products obtain EMC standards and perform their intended functions, Seiwa Electric has established a comprehensive technical support system that includes not only a wide variety of product sales but also support for countermeasures in an anechoic chamber, technical seminars, and exhibitions, thereby meeting a broad range of needs. This document features a number of noise countermeasure-related products such as gaskets and ferrite cores. Please take a look when making your selections. ★ We are currently offering a free catalog of noise countermeasure-related products such as gaskets and ferrite cores! [Featured Products] - Filtering measures - Grounding measures - Shielding measures - Thermal measures… *For more details, please download the PDF document or feel free to contact us.
Cost reduction of around 50% compared to conventional gaskets is possible.
This is a soft-type gasket made of fluororesin. It is very soft, comes with adhesive tape for easy handling, and can be easily installed on complex sealing surfaces. 【Features】 ◇ Easy to work with due to the adhesive tape ◇ Free size and string-like, allowing you to use the necessary length without waste ◇ Compared to conventional fluororesin full gaskets or enveloping gaskets, it can achieve a cost reduction of around 50%. *For more details, please request materials or download the catalog to view.
