Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 15, 2025～Nov 11, 2025
This ranking is based on the number of page views on our site.
31～45 item / All 638 items
Hardness gauge needle high gauge
This is for inspecting the maximum indentation height of the Asuka durometer and the indicating mechanism. Our durometers come in two types with maximum indentation heights of 2.50 mm and 2.54 mm, and we have prepared two corresponding types of needle height gauges. Each type comes in a set of two, one for "50 DEG" and one for "2 DEG."
Check the spring load characteristics at three points: 25, 50, and 75.
The hardness gauge load tester and hardness gauge needle height gauge check the spring load characteristics of the Asker rubber hardness tester at three points: 25, 50, and 75. Before conducting this inspection, it is necessary to confirm that each part of the hardness tester, such as the shape of the indentor, the height of the indentor, and the indicating mechanism, is in the correct condition. Additionally, in the case of "quasi-applicable hardness testers," the spring load characteristics may vary slightly, allowing for convenient use by adjusting the reference indication. For more details, please contact us or refer to the catalog.
Non-glass sight gauge ideal for liquid transfer in pharmaceuticals, food, beverages, cosmetics, and chemical products.
○ Non-glass sight gauge "VIEWLINE" (Flow Sight) ○ Ideal for liquid transfer in pharmaceuticals, food, beverages, cosmetics, and chemical products. ○ Safe as it is not made of glass. ○ Complies with FDA 21CFR175.300 and 177.1550, and USP Class VI. ○ It is also possible to reinforce the exterior with a stainless steel guard. ○ Can be manufactured up to a maximum length of 1 meter.
![[New Type] Vacuum Gauge Active Gauge](https://image.mono.ipros.com/public/product/image/787/2000253691/IPROS42456766797219954689.jpeg?w=280&h=280)
User-optimized active gauge
For all applications from 3000 mbar to 10-10 mbar. Leybold offers sensors of different designs that can measure pressure ranges across several orders of magnitude, each with its specific measurement range. ● For more details, please contact us or download the catalog.
We also accept inquiries and requests for calibration of custom products, as well as standard gauge products.
Yamada Machine Tool Co., Ltd. boasts a top share in screw gauges and sells various gauges as an agent for Daiichi Measurement Manufacturing, which supports Japanese manufacturing. In addition to standard gauges, we also welcome inquiries about custom products and calibration, so please feel free to contact us. ■ Gauges for Parallel Threads - Gauge for parallel threads - Standard screw gauge ■ Gauges for Taper Threads - Pipe taper screw gauge R - American standard pipe taper screw gauge NPT - American standard pipe tight taper screw gauge NPTF ■ Special Purpose Screw Gauges - Screw gauge for perpendicularity inspection - Screw gauge for coaxiality inspection - Adjustable screw ring gauge - Screw plug gauge for length/depth inspection - Gauge handle with coloring ■ Plain Gauges - Limit gauge for holes (carbide limit gauge for holes) - Limit gauge for shafts (carbide limit gauge for shafts) - Master gauge (carbide master gauge) - Taper gauge ■ Other Special Gauges - Plate-type height gauge - Plate-type depth gauge - Internal width gauge (keyway gauge) - Spline gauge and more.
Compared to steel, it is resistant to rust! This carbide pin gauge excels in wear resistance and has a long lifespan.
Tateno Co., Ltd. manufactures tools that utilize cemented carbide, which can be useful in various fields such as gauges, cutting tools, chips, holders, wear-resistant products, and blades. Cemented carbide pin gauges excel in wear resistance, have a long lifespan, and do not undergo aging changes. Their linear expansion coefficient is half that of steel and ceramic gauges. Compared to steel, they are more resistant to rust and are significantly advantageous in terms of total life cost. 【Features】 - Excellent wear resistance and long lifespan - More resistant to rust compared to steel - Linear expansion coefficient is half that of steel and ceramic gauges - No aging changes - Significantly advantageous in total life cost compared to steel For more details, please contact us or download the catalog.
Compared to steel, it is resistant to rust! This carbide pin gauge excels in wear resistance and has a long lifespan.
Tateno Co., Ltd. manufactures tools that are useful in various fields, including gauges, cutting tools, chips, holders, wear-resistant products, and blades, using cemented carbide. Cemented carbide pin gauges have excellent wear resistance, with a lifespan 20 to 30 times longer compared to steel, and their linear expansion coefficient is about half that of steel and ceramic gauges. Gauge management is also easy. They are more resistant to rust compared to steel, and there is almost no change over time, making them significantly advantageous in terms of total life cost. 【Features】 - Excellent wear resistance and long lifespan - More rust-resistant compared to steel - Linear expansion coefficient is about half that of steel and ceramic gauges - Almost no change over time - Significantly advantageous in terms of total life cost compared to steel For more details, please contact us or download the catalog.
This is a taper gauge (chamfer measuring instrument) that can instantly and accurately measure the diameter of the chamfered hole and the width of the tapered groove.
● The outer diameter of the tips of chamfered shafts, piston plunger valve shafts, and tapered arbors can be measured quickly and accurately. ● There is also a digital taper gauge IKT-DI available.
This is a taper gauge (chamfer measuring instrument) for external measurements of a taper, which is said to take time and cost, and can be easily used.
● The chamfered shaft, piston plunger valve shaft, and the outer diameter at the tip of the tapered arbor can be measured quickly and accurately. ● There is also a digital taper gauge AKT-DI available.
It achieves accurate measurements even under environmental conditions such as temperature changes and dust. The gauge sensor features a capsule design that protects against splashes and dust.
【Features】 ● It has a transmission lever inside. ● The transmission rods of the extension holder and depth extension are made of low thermal expansion coefficient Invar steel, allowing for accurate measurements even in environments with significant temperature changes. ● The plunger and anvil are made of highly durable carbide (tungsten carbide). ● All parts except for the plunger and anvil are made of hardened steel or finished with hard chrome plating, achieving higher durability. ● The standard dial test connection screw allows for the combination of various accessories for dial tests, accommodating special inspection requirements.
Magnet float type level gauge
- The invisible part is particularly minimal, and visibility can be achieved in series at any height. The standard MG (magnet float) type liquid level gauge has a standard installation length equal to the visible length. - The float for the KLINAGE MG (magnet float) type liquid level gauge is designed, manufactured, and adjusted individually according to the required liquid specific gravity, eliminating the need for error correction in liquid level indication. - The visible direction can be freely changed on-site. - As an interface gauge, it can also measure the interface between two liquids with different specific gravities. - Using a reed switch allows for ON-OFF control of solenoid valves, pumps, etc., in conjunction with liquid level monitoring. - By attaching a magnetic-sensitive level detector to the column body, remote control is possible through a DC 4-20mA output. - Setting the installation length equal to the visible length is easily achievable. - Various MG (magnet float) type liquid level gauges can be manufactured as products certified by the Minister of Health, Labour and Welfare for high-pressure gas. - It can also be used as a water level gauge for boilers.
Compact pressure gauge compatible with the gas supply system integration for semiconductors.
<Features> ■ Display section outer diameter 20mm (1.125 inches) / Easy attachment and detachment to 1.5-inch base block ■ Excellent visibility with 3.5-digit LED digital pressure display ■ Display section can rotate to match the direction of piping ■ Selectable switch output (NPN/PNP), voltage output, and current output ■ Sensor element and joint are integrated structure by electron beam (EB) welding ■ Compliant with RoHS directive, CE marking compliant, UL certification pending
Non-corrosive gas with 3 functions LCD display, switch output, and analog output.
● Achieves high stability Uses a semiconductor chip for the pressure-sensitive element, with temperature compensation through electronic technology ● Achieves low power consumption By adopting time division drive, continuous operation for about 9000 hours (1 year) is possible with a 3.6V lithium battery (battery type) ● Display section features a large, easy-to-read LCD ● Built-in pressure switch function Two-point settings of HI and LO can be set as desired ● Analog voltage output (0-1V) ● Adopts DIN size
Excellent corrosion resistance due to the stainless steel diaphragm, equipped with three functions: LCD display, switch output, and analog output.
● Achieves high stability Uses a semiconductor chip in the pressure-sensitive element, with temperature compensation through electronic technology ● Achieves low power consumption By adopting time division drive, continuous operation for about 9000 hours (1 year) is possible with a 3.6V lithium battery (battery type) ● The display section features a large, easy-to-read LCD ● Built-in pressure switch function Two-point settings of HI and LO can be set as desired ● Analog voltage output (0-1V) ● DIN size adopted
A compact pressure gauge with excellent visibility, usable in a wide range of fields.
● Compact, lightweight, and drip-proof general-purpose pressure gauge □ Achieves a drip-proof structure (IP65) with a compact 30 mm pressure gauge. ● Adoption of highly visible LED Not only for panel surface mounting but also easy to see in dark places with LED display. ● Settings available according to application Three analog output modes Eight types of switch output modes ● EMC standards EN 55011 (EMI) EN 61326-1 (EMS) ● Low power consumption through non-display mode ● Protection of setting data with panel lock function
