glue Product List and Ranking from 281 Manufacturers, Suppliers and Companies

Single-handedly usable room temperature curing conductive adhesive for robotics.

Room temperature curing conductive adhesive that requires no measuring or hand mixing for joint repair.

In the field of robotics joint repair, precise conductive connections and durability are required. In particular, addressing components that are sensitive to heat, complex shapes, and improving work efficiency are emphasized. Traditional repair methods can face challenges such as difficulties in soldering and variations due to the skill level of the workers. ONE-HAND MIXING addresses these issues with an automatic mixing and dispensing function that can be easily handled with one hand, achieving uniform quality conductive connections at room temperature. 【Usage Scenarios】 - Wiring repair of robot joints - Conductive connections around sensors - Application of conductive patches to movable parts - Conductive bonding to aluminum and resin components 【Benefits of Implementation】 - Enables conductive connections in areas where soldering is difficult - Stable quality that does not depend on the skill of the worker - Reduces the impact on heat-sensitive components - Flexibility to accommodate vibrations and bending

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For the telecommunications industry] One-handed usable room temperature curing conductive adhesive

For adjusting antennas of communication equipment, no measurement or manual mixing is required for room temperature conductive connections.

In the telecommunications industry, precise adjustment of antennas and stable conductive connections are essential for maintaining communication quality. Particularly in the case of delicate components or on-site work, soldering can be challenging, and dealing with heat-sensitive materials presents difficulties. Improper connections can lead to communication failures or performance degradation. ONE-HAND MIXING allows for the automatic mixing and dispensing of two liquids using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive connections for antenna components - Repair and maintenance of delicate communication equipment - Rapid conductive connection work on-site 【Benefits of Implementation】 - Enables conductive connections for materials that are difficult to solder - Applicable to heat-sensitive components - Improved work efficiency and stabilization of quality

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-handed usable room temperature curing conductive adhesive for research and development.

No measuring or hand mixing required. Just press for easy room temperature connection.

In the field of research and development, there is a demand for rapid and reliable conductive connections to a variety of materials. This is particularly challenging when creating prototypes, as it may involve components that are sensitive to heat or materials that are difficult to solder. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, and reducing variability in the mixing ratio by the operator. Because it cures at room temperature, it is suitable for conductive connections involving heat-sensitive resin components, FPCs, LEDs, and sensors, and it can also provide conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. 【Application Scenarios】 - Conductive connections for heat-sensitive electronic components (FPCs, LEDs, sensors, etc.) - Conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairing and connecting areas subjected to bending or vibration - Rapid conductive evaluation of prototypes 【Benefits of Implementation】 - Reduces the labor involved in measuring and mixing, improving work efficiency - Minimizes variability in the mixing ratio, achieving stable conductive performance - Reduces the risk of damage to components due to heat - Enables conductive connections to a variety of materials, enhancing development flexibility

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[For DIY and Hobbies] One-Handed Use Room Temperature Curing Conductive Adhesive

No measuring or hand mixing required. Just press for a room temperature conductive connection.

In DIY and hobby electronics, precise connections of small components and handling of heat-sensitive materials are required. Particularly in tasks involving difficult-to-solder materials or delicate electronic components, accurate and reliable connections can significantly impact the performance and lifespan of the product. Traditional methods often faced challenges such as the labor involved in measuring and hand mixing, as well as variations in mixing ratios. ONE-HAND MIXING addresses these issues, allowing anyone to easily and reliably achieve electrical connections. 【Usage Scenarios】 - Wiring and component connections in electronics projects - Connections involving heat-sensitive resin parts, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairs and connections in areas subject to bending or vibration 【Benefits of Implementation】 - Reduces the labor involved in measuring and mixing - Minimizes variations in mixing ratios by the operator, achieving stable conductivity performance - Safe and easy to work with, as soldering irons are not required - Maintains flexibility after curing, accommodating various applications

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【For Home Appliances】Room Temperature Curing Conductive Adhesive ONE-HAND MIXING

No measuring or hand mixing required. Simply press for easy electrical connection at room temperature.

In the repair of circuit boards for home appliances, precise conductive connections are required. Particularly in cases where the circuit board has heat-sensitive components or complex wiring, soldering can often be difficult. Improper connections can lead to product malfunctions or reduced lifespan. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for measuring and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Usage Scenarios】 - Conductive connections for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel - Repairing or connecting areas subjected to bending or vibration 【Benefits of Implementation】 - Enables safe and easy conductive connections without the need for a soldering iron - Cures at room temperature, minimizing damage to components from heat - Maintains flexibility after curing, providing strong connections resistant to vibration and bending

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-Hand Mixing Room Temperature Curing Conductive Adhesive for Medical Devices

For connecting medical device probes. No measurement or manual mixing required for room temperature conductive connection.

In the field of medical devices, reliable conduction assurance is required for precise probe connections. Particularly when using heat-sensitive sensors or delicate components, there are cases where soldering is difficult or where it is necessary to avoid thermal effects. In such situations, uniform conduction performance and ease of operation become important. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for weighing and manual mixing, and reducing variations in formulation by the operator. Since it cures at room temperature, it can be safely used for conduction connections of heat-sensitive medical device components. 【Application Scenarios】 - Conduction connections of medical probes - Wiring connections around sensors - Conduction repairs of heat-sensitive electronic components - Conduction bonding to glass or resin materials 【Benefits of Implementation】 - Easy conduction connections even in areas where soldering is difficult - Reduction in work time and assurance of uniform quality - Avoidance of damage to components due to heat - Flexibility that accommodates vibrations and bending

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Robot-oriented room temperature curing conductive adhesive ONE-HAND MIXING

For reinforcing robot joints, easily achieve conductive connections at room temperature with just a push.

In reinforcing robot joints, durability of movable parts and electrical connectivity are required. Particularly in joint areas with complex structures, ensuring reliable fixation and conductivity is essential for maintaining the robot's performance. Improper fixation or poor conductivity can lead to joint damage or malfunction. ONE-HAND MIXING allows for automatic mixing of two liquids simply by pressing, without the need for measuring or manual mixing, easily achieving electrical connections at room temperature where soldering is not possible. 【Usage Scenarios】 - Reinforcement and fixation of robot joints - Electrical connections around sensors and actuators - Adhesion to metals, plastics, and composite materials 【Benefits of Implementation】 - Reduction of work time and minimization of variability by operators - Decreased impact on heat-sensitive components - Enables electrical connections in areas where soldering is difficult - Improved durability against vibration and bending due to flexibility after curing

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wearable-friendly single-handed use room temperature curing conductive adhesive

For attaching sensors to wearable devices. Achieves easy and reliable conductive connections at room temperature.

In the field of wearable devices, there is a demand for the reliable and efficient connection of precision components such as sensors, amidst ongoing miniaturization and thinning. Particularly for connections to materials sensitive to heat or components with complex shapes, traditional heating methods are challenging, and manual mixing poses a risk of performance degradation due to variations in mixing ratios. ONE-HAND MIXING addresses these issues by automatically mixing two liquids with just a push of one hand, providing a simple and reliable conductive connection with a conductive adhesive that cures at room temperature. 【Usage Scenarios】 - Connection of sensor modules to substrates in wearable devices - Formation of conductive patches on flexible printed circuits (FPC) - Fixation and electrical connection of small sensors to housings - Conductive repairs in areas subjected to bending or vibration 【Benefits of Implementation】 - Reduction in work time and labor - Decrease in defects due to mixing errors - Mitigation of damage to heat-sensitive components - Applicability to materials that are difficult to solder - Improved durability due to flexibility

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-Hand Mixing Room Temperature Curing Conductive Adhesive for Drones

For bonding drone propellers. No measuring or hand mixing required, connects at room temperature.

In the drone industry, while lightweight and high-strength structures are required, components such as propellers may need electrical connections. Traditional soldering has faced challenges in dealing with heat-sensitive materials and applying to complex shapes. Additionally, manual mixing of adhesives carries the risk of performance degradation due to variations in mixing ratios. ONE-HAND MIXING addresses these challenges, enabling easy and reliable electrical connections for drone propeller bonding at room temperature. 【Usage Scenarios】 - Electrical connections for drone propeller components - Electrical processing for heat-sensitive resin propellers - Quick repair work on-site 【Benefits of Implementation】 - Enables electrical connections for materials that are difficult to solder - Reduces variations in mixing ratios by operators, achieving stable electrical performance - Lowers the impact on components due to heat, as it cures at room temperature - Flexible and suitable for connections in areas subject to vibration

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-Hand Mixing Conductive Adhesive for Communication Equipment - Room Temperature Curing

For bonding antennas of communication devices. Simply press for a conductive connection at room temperature.

In the telecommunications equipment industry, particularly in antenna bonding, reliable conductive connections of fine components are essential. The performance of antennas is greatly influenced by the electrical characteristics of the connection points, making the assurance of stable conductive performance indispensable. Traditional methods often face challenges when dealing with materials that are difficult to solder or components that are sensitive to heat. ONE-HAND MIXING offers a solution to these challenges by allowing for automatic mixing of two components simply by pushing, without the need for measuring or manual mixing, enabling conductive connections at room temperature. 【Application Scenarios】 - Conductive connections for telecommunications equipment antennas - Bonding of heat-sensitive resin components - Conductive bonding to dissimilar materials such as glass, aluminum, and stainless steel - Repairing areas subjected to bending or vibration 【Benefits of Implementation】 - Simplification of work processes and reduction of variability by operators - Decreased risk of damage to heat-sensitive components - Improved capability to handle materials that are difficult to solder - Durable connections that leverage flexibility

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

【For Lighting】Room Temperature Curing Conductive Adhesive ONE-HAND MIXING

Simply press to easily connect the LED at room temperature. No weighing or hand mixing required.

In the lighting industry, reliable conductive connections for LEDs are directly linked to product performance and lifespan. Particularly in the implementation of heat-sensitive LED components and surrounding substrates, there is a need to avoid difficulties with soldering and to prevent damage from heat. Additionally, improving work efficiency and minimizing variations in mixing by operators are also important. ONE-HAND MIXING addresses these challenges by automatically mixing and dispensing two components with a dedicated cartridge and mixer nozzle, achieving room-temperature curing conductive adhesion without the need for weighing or manual mixing. This makes it easier to create conductive connections to materials that are difficult to solder and to work around heat-sensitive components. 【Application Scenarios】 - Conductive connections between LED chips and substrates - Wiring connections within LED modules - Ensuring conductivity around heat-sensitive resin components - Conductive adhesion to materials that are difficult to solder, such as glass and aluminum 【Benefits of Implementation】 - Eliminates the need for soldering irons, enhancing safety and convenience in work - Reduces variations in mixing ratios by operators, achieving stable conductive performance - Avoids damage to components from heat due to room-temperature curing - Increases reliability against vibration and bending due to flexibility after curing

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Conductive adhesive for the energy industry that can be used with one hand and cures at room temperature.

For solar cell connections. Just press to automatically mix the two liquids, making it easy to achieve a conductive connection at room temperature.

In the energy industry, particularly in the connection of solar cells, reliable conductivity is essential. Solar panels are exposed to outdoor conditions and temperature changes, making the durability of connections and stable electrical characteristics indispensable. Connections to materials that are difficult to solder or components that are sensitive to heat can affect the performance and lifespan of the product. ONE-HAND MIXING addresses these challenges by automatically mixing two components with just a push, eliminating the need for weighing and manual mixing, and enabling conductive connections at room temperature. 【Usage Scenarios】 - Wiring connections for solar panels - Connections for flexible solar cells - Conductive bonding to heat-sensitive materials 【Benefits of Implementation】 - Simplification of work and assurance of uniform quality - Compatibility with materials that are difficult to solder - Mitigation of heat impact on components

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Semiconductor-grade room temperature curing conductive adhesive ONE-HAND MIXING

No measuring or hand mixing required. Simply press for easy electrical connection at room temperature.

In the semiconductor industry, reliable conductive connections are required for precise chip fixation. Particularly, when mounting heat-sensitive components or on complex-shaped substrates, soldering can be difficult. The use of inappropriate adhesives or inaccurate mixing ratios can lead to poor connections and reduced product performance. ONE-HAND MIXING allows for the automatic mixing and dispensing of two components using a dedicated cartridge and mixer nozzle, eliminating the need for weighing and mixing tasks, reducing variability in the mixing ratio by the operator, and achieving stable conductive connections. 【Application Scenarios】 - Conductive connections for heat-sensitive resin components, FPCs, LEDs, and sensors - Conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and SUS - Repairing or connecting areas subject to bending or vibration 【Benefits of Implementation】 - Reduction in work time and labor - Conductive connections with uniform quality - Compatibility with materials that are difficult to solder

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-Hand Mixing for Conductive Repair of Flexible PCBs

For repairing conductivity in thin substrates and narrow areas. No measuring or hand mixing required. Just press to automatically mix the two components, allowing for easy conductivity connections at room temperature without the use of solder.

For the repair of conductive connections in components that are difficult to apply heat or mechanical stress, such as FPCs and thin film substrates. ONE-HAND MIXING is easy to apply to targeted areas and is suitable for repair applications around flexible printed circuit boards where soldering is challenging. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Wire and lead wire continuity fixation ONE-HAND MIXING

Fix thin wires with conductive adhesive. No weighing or hand mixing required. Just press to automatically mix the two components, making it easy to create conductive connections at room temperature without solder.

For applications where you want to secure the continuity of fine wires and lead wires without using solder or crimp terminals. ONE-HAND MIXING can be applied to the necessary areas to achieve both adhesion and conductivity, making it effective for connections around sensor electrodes and small components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPC, LEDs, and sensors. - It enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility even after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Ground connection to metal housing ONE-HAND MIXING

For ground connections without screws or bolts. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

When you want to connect GND or earth to metal enclosures or plated parts. Even in structures where screw fastening or riveting is difficult, conductive adhesive connections enhance the design flexibility for enclosure grounding and shield connections. ONE-HAND MIXING is a product that allows for automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for weighing or mixing operations, which suppresses variations in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. * For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Aluminum casing conductive connection ONE-HAND MIXING

For grounding/GND connection to aluminum bodies. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the need for solder.

For those considering conductive connections to aluminum enclosures, aluminum bodies, and metal components: ONE-HAND MIXING offers an option for grounding and GND connections through application, even in areas where screwing or welding is difficult. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, allowing for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

No-screw ground connection ONE-HAND MIXING

When you want to establish a connection without using screws or terminals. Just press to automatically mix the two liquids, allowing for easy room temperature connections without solder.

For grounding connections where there is no space for screws, nuts, or crimp terminals, or where you want to reduce processes, ONE-HAND MIXING utilizes conductivity and adhesion to achieve easy electrical bonding to housings and components. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver fillers using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which suppresses variations in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Field repair of poor connectivity ONE-HAND MIXING

For repair work on connections, wiring, and patterns. Just press to automatically mix the two components, allowing for easy cold connections without the use of solder.

For continuity repairs on-site, such as poor contact, broken wiring, or missing circuit board patterns. ONE-HAND MIXING is suitable for small area repairs in prototyping, evaluation, and maintenance because it allows for quick use of the necessary amount. ONE-HAND MIXING is a product that automatically mixes and dispenses a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, which reduces variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Alternative connection to spot welding ONE-HAND MIXING

For conductive connections that cannot be welded. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For the conductive connection of components where spot welding and soldering are to be avoided. This method can be considered for structures where heat impact needs to be minimized, and during the prototype stage where equipment installation is difficult, using conductive adhesives. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections of heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive adhesion is possible without using a soldering iron, even on materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It maintains flexibility after curing, allowing it to be used for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-hand mixing for alternative conductive connection to rivets.

For connections with a structure that is difficult to rivet or crimp. Automatically mixes two liquids just by pressing, allowing for easy room-temperature conductive connections without the use of solder.

For conductive connections in structures where rivets, crimp terminals, and screws are difficult to use, ONE-HAND MIXING supports component design that requires miniaturization and space-saving by combining adhesive fixation through application and conductivity. ONE-HAND MIXING is a product that can automatically mix and dispense a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring and mixing, which reduces variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive adhesion to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - Retains flexibility after curing, allowing it to be used for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

EMI shielded conductive connection ONE-HAND MIXING

For connecting the shield material and the chassis ground. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

For conductive connections between EMI shielding materials, metal enclosures, and grounds. Even in areas where screw fastening or soldering is difficult, using conductive adhesive allows for space-saving shield and ground connections. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No need for measuring or mixing, reducing variability in the mixing ratio by the operator. - Cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - Maintains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Large Area Electrode Contact Stabilization ONE-HAND MIXING

For the adhesion and fixation of large electrodes for measurement. Automatically mixes two liquids with just a push, allowing for easy conductive connections at room temperature without the use of solder.

This is for applications where large electrodes in the 200-300mm range are closely adhered to materials, such as in dielectric property measurements. It helps suppress the micro-gaps that can easily occur with simple physical contact, thereby reducing measurement variability. The workability, which allows for easy position adjustment after application, is also appreciated. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing work is required, which helps suppress variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - It enables conductive bonding to materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without the use of a soldering iron. - It retains flexibility even after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Defroster tab adhesive repair ONE-HAND MIXING

Restores terminal and tab disconnections with continuity. Automatically mixes two liquids with just a push, allowing for easy cold connections where solder cannot be used.

For repairs around terminals that cannot withstand heat or mechanical stress, such as the defroster tab of the rear window, we support urgent repairs and short delivery times with high adhesive strength and conductivity, made in Japan and available for immediate delivery. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible without using a soldering iron, even with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel. - It retains flexibility after curing, making it usable for repairs and connections in areas subjected to bending and vibration. *For detailed data, please check the TDS and the special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Outdoor equipment continuity connection ONE-HAND MIXING

Conductive adhesive with weather resistance test data. Automatically mixes the two components just by pressing, allowing for easy electrical connections at room temperature without the use of solder.

For grounding connections and continuity repairs of equipment and facilities used outdoors. We publish data on weather resistance test results and changes in conductivity and adhesion during environmental testing as technical documentation to support considerations for outdoor applications. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive with silver filler using a dedicated cartridge and mixer nozzle. - No measuring or mixing work is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections around heat-sensitive resin parts, FPCs, LEDs, and sensors. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please refer to the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Japanese-made, ready-to-ship conductive adhesive ONE-HAND MIXING

For those struggling with long lead times for overseas products. With just a push, it automatically mixes two liquids, allowing for easy room-temperature connections where solder cannot be used.

We address issues such as unstable delivery times for overseas conductive adhesives, the need for refrigerated storage, and classification as hazardous materials. With domestic manufacturing and an immediate delivery system, we support urgent repairs and quick evaluations. We also offer bulk purchase discounts for corporations. *Consultation required. ONE-HAND MIXING is a product that allows for the automatic mixing and dispensing of a two-component conductive epoxy adhesive containing silver filler using a dedicated cartridge and mixer nozzle. - No weighing or mixing is required, reducing variability in the mixing ratio by the operator. - It cures at room temperature, making it suitable for conductive connections in heat-sensitive resin parts, FPCs, LEDs, and sensor areas. - Conductive bonding is possible with materials that are difficult to solder, such as glass, resin, aluminum, and stainless steel, without using a soldering iron. - It retains flexibility after curing, making it usable for repairs and connections in areas subject to bending and vibration. *For detailed data, please check the TDS and special website.

Company：ペルノックス
Price：Less than 10,000 yen

Repair Agent
Solder
glue
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

One-stop outsourcing for manufacturing: "Continuing OEM"

Manufacturing is all on us. Customers can focus on sales and marketing.

We want to focus more on sales and marketing rather than manufacturing. We want to concentrate on our core business and grow our operations. "Continuing OEM" will handle the entire manufacturing process consistently. ◆ One-stop process Raw material procurement → Mixing and kneading → Filling and portioning → Labeling → Packaging → Warehousing → Nationwide shipping Customers are completely freed from manufacturing tasks and can focus on sales strategies and new product development. ◆ Benefits of a consistent approach - Completed through a single point of contact - No coordination errors between processes - Optimization of total costs - Reduced lead times - Comprehensive inventory management Leave manufacturing to the professionals and accelerate your business. That is the strength of "Continuing OEM." We can also accommodate small lot production. Original paste is produced starting from 40kg. We can also handle high-viscosity products (over 100,000 mPa·s). If you are considering outsourcing the entire process, please feel free to consult with us.

Company：Noda Chemical Industry Co., Ltd.
Price：Other

Contract manufacturing
Processing Contract
Other contract services
glue

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sample available] High purity coarse iron powder +100 mesh

Zero fine powder; C ≦ 0.02%. It can be used for thermal insulation materials, deoxidizers, soil purification, and more. Please consult us regarding applications.

This is high-purity, coarse iron powder produced from the manufacturing process. It has a proven track record in applications such as thermal insulation materials, deoxidizers, and soil purification agents, but we also welcome suggestions for "could it be used for this purpose?" 【Three Features】 1. Coarse particles 99.5% (+100 mesh) → Almost zero fine powder 2. High purity (C≦0.02%) → Minimal impurities 3. Slow-release reaction → Suppresses rapid reactions As it is a recycled resource produced from the manufacturing process, the annual supply is limited. We can accommodate small lots, making it ideal for prototypes and research and development. Please feel free to consult us if you need samples.

Company：Noda Chemical Industry Co., Ltd.
Price：Other

Other metal materials
glue

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Sample available] Coarse iron powder +100 mesh *For soil purification and other uses

Zero clogging due to fine powder. It maintains permeability while purifying through reduction with high-purity coarse iron powder.

Are you struggling with "clogging" and "decreased permeability" in soil and groundwater purification sites? 【Solving On-Site Challenges】 ✓ Decreased permeability due to excessive fine powder in iron powder ✓ Risk of secondary contamination from impurities (heavy metals) ✓ Purification effects that do not last long 【Three Features】 1. Coarse particles 99.5% (approximately 150μm and above) → Ensures permeability with zero fine powder 2. High purity (C≦0.02%) → Minimal impurities 3. Slow-release reduction reaction → Stable purification effects over a long period As a recycled resource produced from the manufacturing process, the annual supply is limited. We can accommodate small lots, making it ideal for prototypes and research and development. Please feel free to consult us if you need samples.

Company：Noda Chemical Industry Co., Ltd.
Price：Other

Other metal materials
glue

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

glue Product List and Ranking from 281 Manufacturers, Suppliers and Companies | IPROS GMS

glue Manufacturer, Suppliers and Company Rankings

glue Product ranking