We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

heater Product List and Ranking from 473 Manufacturers, Suppliers and Companies | IPROS GMS

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

heater Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

  1. ウシオ電機 Tokyo//Industrial Electrical Equipment
  2. 西都電機 Osaka//equipment
  3. テクノカシワ Tokyo//Industrial Electrical Equipment
  4. 4 日本ヒーター Tokyo//Industrial Electrical Equipment
  5. 5 オーエムヒーター Aichi//Industrial Electrical Equipment
Go to Company Ranking

heater Product ranking

Last Updated： Aggregation Period:Jun 03, 2026～Jun 30, 2026
This ranking is based on the number of page views on our site.

  1. Announcement of exhibition featuring halogen heaters that solve heat issues with "light." ウシオ電機
  2. [General Catalog] Explosion-proof Auto Trace Heater (Self-regulating Heater) テクノカシワ
  3. IC Control Heater "SCH-900SC/900C" クマガイ電工
  4. 4 Eh! An O&M heater here in such a place 【Product Utilization Case】 オーエムヒーター
  5. 5 Underfloor heating heater "Amomat" ジェイ・シー・イー・オーバーシーズ

heater Product List

1141～1170 item / All 2673 items

Displayed results
Cylinder heater

Cylinder heater

Custom sizes are also available! Introducing a silicone rubber heater that is easy to attach and detach.

The "Cylinder Heater" is a product equipped with a silicone sponge for insulation. It comes with a temperature controller, but if advanced temperature control is needed, it can be replaced with a digital temperature controller separately. The heating lamp indicates at a glance that heating is in progress. You can choose based on cylinder size and operating voltage. Please feel free to contact us when you need assistance. 【Specifications Example (Excerpt)】 <Applicable Cylinder: 10L> ■ Rated Voltage: 100V/200V ■ Load Power: 450W ■ Heater Dimensions: 435mm × 400mm *For more details, please refer to the PDF document or feel free to contact us.

  • Silicon Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Flat mica heater

Flat mica heater

Can be manufactured in various shapes! Introducing heaters that are efficient in heat and suitable for uniform temperature distribution.

The "Flat Mica Heater" is a product that sandwiches a heating element made of stainless steel foil between mica (a type of insulation material). With a high watt density and a thickness of about 1mm, it allows for rapid heating and cooling. Additionally, due to its planar heating element, it achieves a uniform temperature distribution, and it has a large contact area with the heated object, resulting in excellent heating efficiency. It can be manufactured in various shapes, including hole drilling, notching, and circular processing. 【Features】 ■ Fast response ■ Good heating efficiency ■ Uniform temperature distribution ■ Can be made in various shapes ■ Maximum operating temperature: 350℃ *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Easily detachable heating and insulation device (Company S, Kanagawa Prefecture)

[Proposal Example] Easily detachable heating and insulation device (Company S, Kanagawa Prefecture)

Ideal for heating and insulation of cylindrical shapes and tank peripheries! Examples of hook and spring type proposals.

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company S in Kanagawa Prefecture was, "We want to heat and maintain the temperature of a pot containing chocolate, but it is essential that the pot can be easily detached for cleaning after use." In response, we proposed the "Hook-Spring Type" mounting method, which allows for easy fixation with a spring and enables detachment. This method is relatively inexpensive and has gained support from many customers. 【Case Overview】 ■ Request - We want to heat and maintain the temperature of a pot containing chocolate. - It is essential that the pot can be easily detached for cleaning after use. ■ Proposal We proposed the Hook-Spring Type mounting method, which allows for easy fixation with a spring and enables detachment. 【Proposed Product】 ■ Custom Product: Hook-Spring Type This specification involves attaching a hook to the heater surface and securing it with a spring. It is ideal for heating and maintaining the temperature of cylindrical shapes and tank peripheries. If the heater needs to be removed, it can be easily detached. *For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Request for shortest delivery (Company H, Tokyo)

[Proposal Example] Request for shortest delivery (Company H, Tokyo)

Standard size silicone rubber heater! An example of shipping the next day after order placement.

We would like to introduce a case that was proposed in response to our customer's concerns and requests. The request from Company H in Tokyo was, "The silicone rubber heater we were using has broken and is no longer usable. If the heater is not operational, it will hinder our business, so we would like it shipped as soon as possible." Since it was a specification that could be handled with our standard stock items, we were able to ship it the day after the order was placed. Our company has a wide range of standard stock items available, allowing for prompt responses. [Case Overview] ■ Request - The silicone rubber heater we were using has broken and is no longer usable. - If the heater is not operational, it will hinder our business, so we would like it shipped as soon as possible. ■ Result - Since it was a specification that could be handled with standard stock items, we were able to ship it the day after the order was placed. - We have a wide range of standard stock items available, allowing for prompt responses. [Proposed Product] ■ Silicone Rubber Heater - Standard Stock Item This is a silicone rubber heater of a standard size. It can be shipped the day after the order is placed at the earliest. For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Heater that can withstand temperatures above 200°C (Company K, Kyoto Prefecture)

[Proposal Example] Heater that can withstand temperatures above 200°C (Company K, Kyoto Prefecture)

Using materials designed for high-temperature applications! A case study of products that can be continuously used at temperatures of 260°C.

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company K in Kyoto Prefecture was, "We would like to adopt silicone rubber heaters for our equipment, but the operating temperature is around 250°C. I have heard that the heat resistance of silicone is generally around 200°C; is it possible to accommodate this?" In response, we proposed our stock high-temperature silicone material (with a continuous use temperature specification of 260°C) silicone rubber heater. Our company can manufacture custom products using silicone materials that can withstand high-temperature applications. 【Case Overview】 ■ Request - We want to adopt silicone rubber heaters for our equipment, but the operating temperature is around 250°C. - I have heard that the heat resistance of silicone is generally around 200°C; is it possible to accommodate this? ■ Proposal We proposed a silicone rubber heater made from our stock high-temperature silicone material (with a continuous use temperature specification of 260°C). 【Proposed Product】 ■ Custom Product HT Type (Heat Resistance 260°C Specification) This is a silicone rubber heater made using a material type suitable for high-temperature applications (non-UL certified). For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Heater with Insulation to Prevent Heat Loss (Company S, Tokyo)

[Proposal Example] Heater with Insulation to Prevent Heat Loss (Company S, Tokyo)

Fixed the heater with Velcro! A case where it became possible to efficiently warm the piping.

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company S in Tokyo was to "heat the fine piping of the factory production line," and "since we want to efficiently warm the piping with a specification that allows for easy attachment and detachment, we would like a rubber heater with insulation to prevent heat loss." In response, we proposed an R-shaped type heater that can be bent to fit fine piping. Additionally, with a Velcro fastening specification, it can be easily attached and detached, and by integrating a silicone sponge, it became possible to efficiently warm the piping. [Case Overview] ■ Request We want a specification that allows for easy attachment and detachment, and we would like a rubber heater with insulation to prevent heat loss for efficiently warming the piping. ■ Proposal We proposed an R-shaped type heater that can be bent. [Proposed Product] ■ Custom Product: R-shaped, Velcro fastening type The heater was fixed using Velcro to fit cylindrical objects due to the R-shaping. For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Installation of Heater on Our Product (Company P, Aichi Prefecture)

[Proposal Example] Installation of Heater on Our Product (Company P, Aichi Prefecture)

We perform processing up to the bonding of heaters! Each piece is carefully bonded and baked.

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company P in Aichi Prefecture was, "We want to heat the metal plates, which are components of our products, with silicone rubber heaters, but due to quantity and technical difficulties, we would like to request the adhesive application for the heaters." We received the customer's components and processed them by applying the heaters at our company. We carefully adhered and baked each component provided by the customer. 【Case Overview】 ■ Request It is difficult for the customer to apply the heaters due to quantity and technical issues. ■ Result We received the customer's components and processed them by applying the heaters. Each piece was carefully adhered and baked. 【Proposed Product】 ■ Custom Product - Plate Adhesion Type This specification involves the adhesive application of heaters to the metal plates provided by the customer. *Please note that adhesive application may not be possible depending on the shape of the plates. For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Production of a heater that was declined by other companies (Y Company, Tokyo)

[Proposal Example] Production of a heater that was declined by other companies (Y Company, Tokyo)

Not only cylindrical shapes, but also objects with different shapes! A case of bending into a rectangular shape using our company's know-how.

We would like to introduce a case that was proposed in response to our customer's concerns and requests. The request from Company Y in Tokyo was, "Can you manufacture a rubber heater that fits a square-shaped part that other companies have refused to work on?" With our expertise, we were able to realize the production of a heater that is bent to fit a square shape. 【Case Overview】 ■ Request We would like you to manufacture a rubber heater that fits a square-shaped part. ■ Result We successfully produced a heater that is bent to fit a square shape. 【Proposed Product】 ■ Custom Product - Irregular Shape R Processing Type We can perform bending to fit not only cylindrical shapes but also irregularly shaped heating targets. * Depending on the shape, you may need to provide the heating target. * If it is difficult to provide, there may be a need for a shape jig fee. * In cases where it is difficult to fit the shape, it may not be covered by warranty. For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Proposal Example] Semiconductor Manufacturing Equipment Aligned with High Standards, Company S, Tokyo

[Proposal Example] Semiconductor Manufacturing Equipment Aligned with High Standards, Company S, Tokyo

We manufacture according to your specified heater size and rating! We have the know-how and experience to produce under strict management.

We would like to introduce a case study based on the concerns and requests of our customers. The request from Company S in Tokyo was, "We want to heat the components of semiconductor manufacturing equipment. Given the industry standards, high-quality and management are required; can you accommodate this?" Our company has been manufacturing silicone rubber heaters for semiconductor manufacturing equipment for many years. We have the know-how and experience to produce high-quality heaters under strict management. 【Case Overview】 ■Request - We want to heat the components of semiconductor manufacturing equipment. - High-quality and management are required. ■Result - We have been manufacturing silicone rubber heaters for semiconductor manufacturing equipment for many years. - We have the know-how and experience to produce high-quality heaters under strict management. 【Proposed Product】 ■SR Type (Custom Specification) This is a silicone rubber heater made using our standard material type (UL certified). It will be manufactured to the specified heater size and rating. *Continuous use temperature: 200℃, Maximum use temperature: 230℃ For more details, please refer to the related links or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Band heater

Band heater

Cylindrical heating element with mica insulation

We offer band heaters that feature a structure where heating wires are insulated with heat-resistant mica boards and the outer circumference is covered with stainless steel plates or similar materials. They are lightweight and highly flexible, with smooth contact surfaces that ensure good thermal conductivity and high heating efficiency. Additionally, we provide "open-type band heaters" that can be opened, allowing them to be installed between interfering objects or existing heaters. Please feel free to contact us if you have any requests. 【Standard Band Heaters】 ■ One-piece type ■ Two-piece type ■ One-piece single terminal type ■ Two-piece single terminal type *For more details, please download the PDF or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Energy-saving thin film sheet heater "HeatFlux"

Energy-saving thin film sheet heater "HeatFlux"

Flexible thin film sheet heater controllable by smartphone.

"HeatFlux" is a flexible thin film sheet heater with excellent electric heating efficiency. With a voltage of up to 20V and a current of up to 3A (power: 60W), it features uniform surface heating and contributes to energy savings. Our in-house developed energy-saving temperature control system allows for precise temperature adjustments. It provides your products and systems with creative ideas and possibilities. Please feel free to contact us if you have any inquiries. 【Features】 ■ Stainless steel heating sheet ■ Minimal temperature variation with uniform surface heating ■ Lightweight, thin film heater ■ Flexible and resistant to bending ■ High thermal conductivity due to close contact of the heating element ■ Made from stainless steel with heat resistance, corrosion resistance, conductivity, and electromagnetic wave shielding properties *For more details, please download the PDF or feel free to contact us.

  • Other heaters
  • Heating device
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PCB preheater

PCB preheater

Equipped with three operation modes (power, temperature, profile)! Enables efficient rework.

We would like to introduce our "PCB Preheater." By accurately controlling the temperature of the PCBA, we achieve unparalleled reliability without damaging the components. Additionally, there are three operating modes, and up to eight thermocouples can be used for safer and more efficient rework. 【Features】 ■ Accurate temperature control of the PCBA ■ Three operating modes (Power, Temperature, Profile) ■ Up to eight thermocouples for safe and efficient rework ■ Independent on/off control of the work zone *For more details, please refer to the PDF document or feel free to contact us.

  • Soldering Equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"PHNE" Preheater

"PHNE" Preheater

Reduce the risk of thermal shock during rework.

The "PHNE" is a preheater for PCBs with a maximum size of 11×7 cm. It is an ideal solution for reworking small PCBA commonly used in smartphones. It features two TC connections. Additionally, it boasts reliability with temperature accuracy for PCBA and control that prevents damage to components. The preheater has an easy-to-use navigation menu, allowing for simple and convenient operation. 【Operating Modes】 ■ Power Mode ■ Temperature Mode ■ Profile Mode *For more details, please refer to the PDF document or feel free to contact us.

  • Soldering Equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"PHBE" Preheater

"PHBE" Preheater

Reduce thermal shock risk during rework.

The "PHBE" is a preheater for PCBs with a maximum size of 36×28cm. It can connect to four thermocouples. It boasts unparalleled reliability, with temperature accuracy for PCBA and controls that prevent damage to components. The preheater features an easy-to-use navigation menu for simple and convenient operation. 【Operating Modes】 ■ Power Mode ■ Temperature Mode ■ Profile Mode *For more details, please refer to the PDF document or feel free to contact us.

  • Soldering Equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
"PHXLE" Preheater

"PHXLE" Preheater

Reduce the risk of thermal shock during rework.

The "PHXLE" is a preheater for PCBs with a maximum size of 51×61 cm. Up to 8 thermocouples can be used. It boasts unparalleled reliability, ensuring temperature accuracy for PCBA and preventing damage to components through careful control. The preheater features an easy-to-use navigation menu for simple and convenient operation. 【Operation Modes】 ■ Power Mode ■ Temperature Mode ■ Profile Mode *For more details, please refer to the PDF document or feel free to contact us.

  • Soldering Equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater <consumable>

Heater <consumable>

We have three types available, such as "heater for DS360" and "heater for DR560"!

We would like to introduce our soldering support product, the "Heater." We offer three types, including "for DS360" and "for hot air." Please feel free to contact us when you need assistance. 【Product Lineup】 ■DSH (Heater for DS360) ■DRH (Heater for DR560) ■Heater for hot air *For more details, please refer to the PDF document or feel free to contact us.

  • Soldering Equipment
  • Solder
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
RBS 13x13cm PCB Rework Tool Set

RBS 13x13cm PCB Rework Tool Set

Work more comfortably while avoiding thermal shock risks, enabling accurate work.

The unparalleled reliability in temperature accuracy and control of the PCBA ensures that no components are damaged. Set details: • The PHSE preheater is essential for avoiding thermal shock in multilayer PCBAs during rework. (Heating area 130 x 135 mm) • PHNS support allows for quick, easy, and precise PCB replacement, ensuring proper positioning, making it suitable for repetitive soldering tasks. • RHS multi-joint hand support: Supports the hand close to the workpiece, making the work more comfortable, reducing fatigue, and ensuring precise work processes.

  • Soldering Equipment
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC heater

NC heater

Assistance in selecting suitable equipment. We provide a variety of high-temperature heaters using hot air heating.

The "NC Heater" is an air heater that delivers stable hot air from room temperature up to 800°C. It is a clean heat source that is odorless and non-polluting, with a quick temperature rise and easy temperature control. Various controllers such as flow meters, pressure gauges, and temperature controllers are also available. It is used for deburring, soldering, crimping adhesive sealants, silver brazing, and more. Custom manufacturing is also possible. Please consult us for special cases, changes in voltage, adjustments to gas intake positions, specifications for thermocouples, and more. 【Features】 ■ Non-contact heating ■ Quick temperature rise ■ Use of inert gases is also possible ■ Durable *For more details, please download the PDF or feel free to contact us.

  • Welding Machine
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Heater <Mini Type>

NC Heater <Mini Type>

Ideal heat source for thermoplastic resin riveting! Introducing our heaters.

We would like to introduce the "NC Heater (Mini Type)" that we handle. It is suitable for preheating before printing on cans, heating thermal fusion wires for winding machines such as air-core coils, and heating and drying adhesives. Please feel free to contact us when you need assistance. 【Applications (excerpt)】 ■ Soldering of surface mount type components ■ Heat source for heat shrink tubing ■ Heat source for crimping thermoplastic resins ■ Preheating before printing on cans ■ Heating thermal fusion wires for winding machines such as air-core coils ■ Heating and drying adhesives *For more details, please refer to the PDF document or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
100V-350W Series <NCH Type>

100V-350W Series <NCH Type>

Ideal heat source for thermoplastic resin riveting! Introducing our heaters.

We would like to introduce the "100V-350W Series (NCH Type)" that we handle. It can be used for various applications such as preheating before printing in can manufacturing, heating for thermal fusion of air-core coils in winding machines, heating and drying of adhesives, drying processes for semiconductor silicon wafers, silver brazing for ultra-small components in medical devices, and deburring. Our products can be custom-made with heater capacities (W) ranging from small capacities of AC100V-100W to large capacities of 200V-3KW, according to your desired specifications for shape, dimensions, materials, and glass tube shapes. 【Product Lineup (Excerpt)】 ■ CERAMIC BASE NCH-IN (100/350) ■ CERAMIC BASE NCH-IIN (100/350) ■ CERAMIC BASE NCH-IIIN (100/350) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IML (100/350) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIML (100/350) ■ SUS BASE & LONG, MIDDLE SHEATH NCH-IIIML (100/350) *For more details, please refer to the PDF materials or feel free to contact us.

  • Other heaters
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
NC Heater 100V-650W Series SUS Base

NC Heater 100V-650W Series SUS Base

Ideal for semiconductor drying! Introducing our heaters.

We would like to introduce the "100V-650W Series (NCH Type)" that we handle. To minimize contamination caused by copper adhesion, as seen in the drying process of semiconductor silicon wafers, it is essential that there are no exposed copper wires in the air passage. Additionally, we can manufacture custom products using nickel wires instead of copper wires. For medical devices and other ultra-small component materials, we offer silver brazing, soldering, and deburring. Our products range from small capacities of AC100V-100W to large capacities of 200V-3KW, and we can custom manufacture heaters according to your desired capacity (W), outer shape, specified dimensions, materials, and glass tube shape. *For more details, please refer to the PDF document or feel free to contact us.

  • Wafer
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTC heater

PTC heater

No need for temperature sensors! We introduce compact and energy-efficient products.

A "PTC heater" is a heater that utilizes the characteristics of PTC, which has the property of becoming less conductive to electricity as the temperature rises. Once it reaches a certain temperature, it maintains that temperature. It is suitable for applications requiring high output and rapid automatic temperature rise. We offer custom-made solutions. Please feel free to contact us when you need assistance. 【Features】 ■ Maintains a constant temperature without a controller ■ High output and rapid heating possible due to low resistance ■ High reliability due to contactless operation *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTC flat heater

PTC flat heater

Simply attach it to a flat surface for use! Ideal for use with electronic jars, dryers, copiers, and more.

The "PTC Panel Heater" is a constant temperature panel heater that incorporates PTC (Positive Temperature Coefficient) elements with a special electrode structure for efficient heating. It features excellent thermal response and high reliability, among many other characteristics, and can be customized in size and temperature according to the items being heated. Please feel free to contact us when you need assistance. 【Features】 ■ Uses our low-resistance PTC thermistor as the heating element ■ Low resistance value allows for high heat output ■ High-efficiency heating made possible by the adoption of a special electrode structure ■ High-reliability design due to a power supply structure that does not use solder *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTC freeze prevention heater / PTC defrosting heater

PTC freeze prevention heater / PTC defrosting heater

It is also used for preventing freezing of pitot tubes, which are parts of airplanes, and the propeller parts of drones!

The "PTC Freeze Prevention Heater/PTC Defrost Heater" is a product that can be used for freeze prevention in cold regions and as a defrost heater in case of freezing. It can be utilized for freeze prevention and defrosting with a highly flexible shape. The heater using Maximum Technology's low-resistance PTC achieves energy savings and space efficiency, allowing for designs tailored to customer needs. 【Features】 ■ Uses our low-resistance PTC thermistor as the heating element ■ Due to its low resistance, it generates a large amount of heat and has high output ■ High-efficiency heating is possible due to the adoption of a special electrode structure ■ High-reliability design due to a power supply structure that does not use solder *For more details, please refer to the PDF materials or feel free to contact us.

  • Other electronic parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
PTC camera lens anti-fog heater / PTC camera lens de-icing heater

PTC camera lens anti-fog heater / PTC camera lens de-icing heater

Incorporate a PTC heater into the lens section to directly warm the lens! It can be used to prevent fogging in various machines.

The "PTC Anti-Fog and De-Icing Heater" is a product that prevents condensation, fogging, and ice formation by using a PTC heater to raise the lens temperature above the surrounding temperature. It features a structure that incorporates a PTC heater in areas where fogging or ice prevention is desired. The anti-fog heater is very thin and can be manufactured in various shapes, making it suitable for preventing fogging in a variety of machines beyond just view camera sensor cameras. 【Features】 ■ Uses our low-resistance PTC thermistor as the heating element ■ Due to its low resistance, it generates a large amount of heat and has high output ■ Adopts a special electrode structure for efficient heating ■ High-reliability design due to a power supply structure that does not use solder *For more details, please refer to the PDF materials or feel free to contact us.

  • Other electronic parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lithium-ion battery heating PTC heater

Lithium-ion battery heating PTC heater

The PTC's temperature self-control feature eliminates the need for a temperature control circuit! It contributes to cost reduction, improved reliability, and miniaturization.

We have developed an LLC heating device that forms a high-efficiency, two-stage flow path by sandwiching a PTC with a unique double-sided comb-shaped electrode between two heat exchangers. By circulating the heated LLC around the lithium-ion battery, we achieve full charging even at low temperatures. By providing comb-shaped electrodes on both surfaces of the element, the heat dissipation surface and the heating surface become the same, allowing for efficient heat extraction. 【Features】 ■ Compact and lightweight ■ Low cost due to PTC's self-temperature control, eliminating the need for external control circuits ■ Rapid heating due to double-sided comb-shaped electrodes and two-stage flow path *For more details, please refer to the PDF document or feel free to contact us.

  • Other electronic parts
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Silicone rubber heater - Short delivery time! Ships in as little as 3 days!

Silicone rubber heater - Short delivery time! Ships in as little as 3 days!

Silicone rubber heater [high quality] & [faster]! Available for delivery in as little as 3 days!

<Flexible & High-Temperature Resistant Silicone Rubber Heater> Custom orders can be shipped in as little as 3 days! Thanks to our unique manufacturing system, we can offer low prices! The silicone rubber heater is an easy-to-use and efficient heating tool that incorporates a heating element into a soft, thin silicone rubber sheet. Ultra-fast delivery! Custom-made products can be shipped in as little as 3 days! We deliver high-quality products at low prices! Only 1.5mm thick! With excellent flexibility, it fits perfectly on cylindrical pipes and tanks. Available in all sizes, from small (25mm x 50mm) to large (up to 3m in length). Can be continuously used at temperatures up to 200°C, and the high-temperature type can be continuously used up to 250°C. Supports various shapes such as square, round, and donut shapes. Installation of heat-resistant double-sided tape and sensors is also possible. Our three-dimensional molding technology allows for adhesion to complex shapes. Small lots starting from just one piece are very welcome! We respond to urgent needs on-site with express delivery in as little as 3 days. Inquiries are handled the same day! For more details, please refer to the PDF document or feel free to consult with us.

  • Silicon Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Comic Material] Self-Fusing Silicone Tough Tape Tough Guy

[Comic Material] Self-Fusing Silicone Tough Tape Tough Guy

When you roll it up, it sticks together and becomes one! Introducing the wonders and secrets of the product.

In this document, we introduce "self-fusing silicone tape" in a comic format. We provide an easy-to-understand explanation of its features, such as its ability to withstand heat, electricity, and oil, in addition to water. The content is designed to be easily referenced when considering implementation. Please feel free to download and read it. 【Contents】 ■ Water-related section ■ Kitchen section ■ Exploring its mysteries and secrets section *For more details, please download the PDF or feel free to contact us.

  • Adhesive tape
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Can Rubber Heater <Custom Order Short Delivery Time, Shipping in as Little as 7 Days>

Can Rubber Heater <Custom Order Short Delivery Time, Shipping in as Little as 7 Days>

[Canned Rubber Heater] Compatible with various sizes of cans, custom-made products can be produced from just one piece, and we can ship in as little as 7 days!

This is a "flat rubber heater for can types" used for insulation of cylindrical cans. By wrapping the rubber heater designed for can types around the contents, even semi-solid or high-viscosity materials can be easily heated and kept warm, making them easier to remove. Heaters can be ordered from a single unit, and we can ship within as little as 7 days, so we can accommodate urgent requests if you need to use them suddenly or if your current heater has broken. We can also accommodate special shapes, so please feel free to consult with us. They can be used for various can-type containers, such as those for 18 liters, 20 liters, and 200 liters. We can also accommodate custom containers, so please feel free to inquire. *This is a made-to-order product. It is an industrial-use limited product that does not comply with the PSE mark.

  • Silicon Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
[Silicone Rubber Heater Application Example] Insulation of Equipment and Device Hopper Section

[Silicone Rubber Heater Application Example] Insulation of Equipment and Device Hopper Section

You can achieve dehumidification and heat retention simply by wrapping a surface rubber heater around the hopper!

We would like to introduce examples of the application of "flat rubber heaters" used in the hoppers of tanks within factories. As a solution to issues such as materials accumulating in the hopper and absorbing moisture, leading to poor flow, or the viscosity of liquids preventing flow due to low temperatures, installing flat rubber heaters can help dehumidify powders and maintain the temperature of liquids, improving the flow of contents. 【Product Features】 - The flat heater is made of a thin sheet, making it lightweight and easy to handle. - Attachment to containers is easy with springs or Velcro. - Custom manufacturing is possible, allowing for various sizes to be accommodated. *For more details, please refer to the related links or feel free to contact us.

  • Silicon Heater
  • heater

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to heater

COPYRIGHT © 2001-2026 IPROS CORPORATION ALL RIGHTS RESERVED.