We have compiled a list of manufacturers, distributors, product information, reference prices, and rankings for heater.
ipros is IPROS GMS ・ IPROS One of the largest technical database sites in Japan that collects information on.

heater Product List and Ranking from 469 Manufacturers, Suppliers and Companies

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

heater Manufacturer, Suppliers and Company Rankings

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

  1. 日本ヒーター Tokyo//Industrial Electrical Equipment
  2. 西都電機 Osaka//equipment
  3. トーコー Saitama//Industrial Machinery
  4. 4 Sakae Corporation Onishi Factory Gunma//Machine elements and parts
  5. 5 新日電熱工業 Osaka//Machine elements and parts
Go to Company Ranking

heater Product ranking

Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.

  1. Near-infrared paint dryer Promo Series [Immediate heating of the irradiation section is possible] トーコー
  2. From room temperature to 1200°C in about 150 seconds! High-speed high-temperature cartridge heater. 三洋熱工業
  3. For autonomous driving sensors! Film heaters to prevent malfunctions caused by snow accumulation.
  4. 4 "Everything You Need to Know About Heaters: Frequently Asked Questions" *Free Gift* 新日電熱工業
  5. 5 High-temperature cartridge heater Sakae Corporation Onishi Factory

heater Product List

781～795 item / All 2526 items

Displayed results
Heater Standard Type Cartridge Heater

Heater Standard Type Cartridge Heater

It is a heater that is inserted and used by making holes in molds and heat plates, etc.

The cartridge heater is a cost-effective heater that is used by drilling holes in molds and heat plates and inserting it. It has excellent clearance with the heated object and can be used at temperatures below 300°C. Custom products such as flange fittings and lead wire lengths are available from a single unit. Three-phase types, variable winding types, and sensor-integrated types can also be manufactured. 【Features】 - Used by drilling holes in molds and heat plates and inserting it - Cost-effective heater - Usable at temperatures below 300°C - Custom products such as flange fittings and lead wire lengths available from a single unit - Three-phase types, variable winding types, and sensor-integrated types can also be manufactured For more details, please contact us or download the catalog.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Heater Standard Type Band Heater

Heater Standard Type Band Heater

This is a heater used for heating the cylinders and cylindrical parts of plastic molding machines.

Band heaters are used for heating the cylinders of plastic molding machines such as injection molding machines and extrusion molding machines, as well as for heating cylindrical parts like pipelines. They are lightweight and highly flexible, allowing for a smooth contact surface, which results in good thermal conductivity and high heating efficiency. Custom products, such as those with specific lead wire lengths or special ratings, can be accommodated starting from a single unit. Three-phase types, sensor-integrated types, and lead wire types can also be manufactured. 【Features】 - Used for heating cylinders and cylindrical parts of plastic molding machines - Lightweight and highly flexible - Smooth contact surface can be ensured - Good thermal conductivity - High heating efficiency can be achieved For more details, please contact us or download the catalog.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Lamp heating device (Model SHM-01)

Lamp heating device (Model SHM-01)

This is a device for heating φ300mm bonded wafers using an IR lamp.

- Manual/automatic switching and arbitrary temperature adjustment are possible. - The heating temperature can rise up to a maximum of 500℃.

  • Other semiconductor manufacturing equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Ceramic products: High-temperature refractory bricks and insulating bricks

Ceramic products: High-temperature refractory bricks and insulating bricks

After adding the necessary moisture and mixing thoroughly, it will become a slip! Properties almost identical to the bonded refractory material can be obtained.

Introducing Suzuki Rika's ceramic products: "High-Temperature Refractory Bricks and Insulating Bricks." The high-temperature refractory bricks "CP-33, CPK-33, MG-33" are made using chemically stable special raw materials and are formed using a special pressing method, followed by high-temperature firing. This results in excellent resistance to rapid heating and cooling, compressive deformation, and corrosion at high temperatures. Additionally, the main raw materials for the high-temperature insulating bricks "CP-L, CP-M" are electric-fused hollow granules, making them lightweight with very low thermal conductivity, thus providing excellent insulation properties. 【Product Lineup】 ■ Alumina-based refractory bricks: CP-33/CPK-33 ■ Magnesia-based refractory bricks: MG-33 ■ Alumina-based insulating refractory bricks: CP-L/CP-M *For more details, please refer to the related links or feel free to contact us.

  • Ceramics

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof series heater d2G4/d2G3/d2G2 type

Explosion-proof series heater d2G4/d2G3/d2G2 type

This is a seed heater that can be used in first and second category hazardous areas.

The explosion-proof series heater can be used in hazardous locations, specifically in Class I and Class II hazardous areas. The heater and control unit are designed with a pressure-resistant explosion-proof structure that does not become an ignition source. A maximum of two heaters can be connected to a single control unit. The cable length (standard: 3m) can be designed according to requirements. The heater has a diameter of 16.5mm and comes in a variety of lengths, outputs, and operating temperature ranges. When used in conjunction with an explosion-proof temperature sensor, it allows for temperature control of the heated object. 【Features】 ○ Usable in Class I and Class II hazardous areas ○ Heater and control unit do not become an ignition source ○ Overheating prevention function included ○ A maximum of two heaters can be connected to a single control unit ○ Variety of lengths, outputs, and operating temperature ranges available For more details, please contact us or download the catalog.

  • Other safety equipment
  • Other process controls

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof sheath heater "DGH Series"

Explosion-proof sheath heater "DGH Series"

(Association) Certified product by the Industrial Safety Technology Association! Pressure-resistant explosion-proof structure heat heater.

The "DGH Series" is an explosion-proof sheath heater that can be used in hazardous locations, specifically in Class 1 and Class 2 hazardous areas. The heater and controller are designed with a pressure-resistant explosion-proof structure that prevents ignition. Up to two heaters can be connected to a single controller. The standard cord length is 3 meters, but it can be designed according to requirements. There is a wide variety of lengths, outputs, and temperature ranges available, and when used in conjunction with explosion-proof temperature sensors, it allows for temperature control of the heated objects. 【Features】 - The sheath heater and controller have a pressure-resistant explosion-proof structure - Heater diameter: 16.5 mm - Overheating prevention function included - Explosion-proof performance: d2G2/d2G3/d2G4 (Explosion-proof grade 2 / Ignition degree / G2/G3/G4) - Certified by the Japan Industrial Safety and Health Association For more details, please contact us or download the catalog.

  • Other safety equipment
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Explosion-proof self-regulating heater "DEX Series"

Explosion-proof self-regulating heater "DEX Series"

Certified product by the Industrial Safety Technology Association (Public Corporation)! Explosion-proof heater with self-temperature control function.

The DEX series is an explosion-proof self-regulating heater that can be used in hazardous locations, specifically in Class 1 and Class 2 hazardous areas. It features a self-temperature control function that automatically adjusts the heater's heat output according to the surrounding environmental temperature, eliminating concerns about overheating. Resistors are arranged in parallel between two parallel conductors, preventing any disconnection accidents with the heater. The self-regulating heater and terminal foil are designed with an explosion-proof structure that does not become an ignition source. The cord-type heater can be designed to any requested length and is suitable for wrapping use. 【Features】 - The self-regulating heater has a safe increased explosion-proof structure, and the terminal foil has a pressure-resistant explosion-proof structure. - Up to three heaters can be connected to a single terminal box. - The direction in which the heater exits the power cable can be set arbitrarily. - Explosion-proof performance: Ex e II B T4 (Group IIB / Temperature Class T4) - Certified by the Japan Industrial Safety and Technology Association For more details, please contact us or download the catalog.

  • Other safety equipment
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Hotto e Far Infrared Electric Heater that won't burn even if touched.

Hotto e Far Infrared Electric Heater that won't burn even if touched.

Warm you up from the core of your body! Odorless, windless, and silent. A highly safe heating device that does not use an open flame!

■Wide-spreading warmth Hokatto e is an infrared electric heater that delivers a gentle warmth similar to the sun over a wide area, thanks to its use of far-infrared rays that warm the body from within rather than just the surface, and the adoption of a wide panel to enhance this effect. ■Surface temperature below 400°C, not an open flame While the surface temperature of typical electric heaters is around 750°C, Hokatto e has a surface temperature below 400°C. This relatively low surface temperature reduces the risk of fire. ■Energy-saving spot heating ■Odorless, windless, and silent, making it suitable for use in any setting.

  • ホカットｅ遠赤外線電気ヒーターWPS-30A.png
  • ホカットｅ遠赤外線電気ヒーターWPS-20S.png
  • air conditioning
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Clean, safe, and secure without using fire! A panel heater that does not emit warm air.

Clean, safe, and secure without using fire! A panel heater that does not emit warm air.

Since house dust doesn't rise, the air doesn't get dirty and it's gentle on the body.

Our company handles panel heaters from BEHA. This is a "natural convection heater" that provides quiet and effective heating without the use of fire, thanks to the aluminum plate inside the panel heater. Since it is a heater that does not emit hot air, it does not stir up house dust, making it a gentle panel heater that does not pollute the air. 【Features】 ■ Simple and stylish, space-saving design ■ Easy and safe operation ■ Suitable for heat shock prevention *For more details, please download the PDF or feel free to contact us.

  • air conditioning
  • Other air conditioning equipment

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Improvement of thermal efficiency: 'Circulation Heater' for plants

Improvement of thermal efficiency: 'Circulation Heater' for plants

Numerous delivery achievements in industries such as plants, gas, steelmaking, automotive, air conditioning, textiles, healthcare, pharmaceuticals, and equipment engineering. There are also various achievements with large items.

A circulation heater is an inline heater designed for efficiently and safely directly heating liquids or gases by installing it in the middle of piping. In a circulating or blowing environment, it can form the necessary shape by connecting pipes and flanges made of standard materials such as iron or stainless steel, allowing for the direct heating of flowable substances like gases or liquids by combining it with flange heaters within the pipes through which the heated substances pass. 【Features】 - Circulating heating of various liquids and gases - Can be installed in the middle of piping for efficient and safe heating - Heated substances: → Liquids: Water, oil (heat transfer oil, machine oil, heavy oil, etc.), and other chemical liquids → Gases: Air, steam, and various gases - Depending on the application, it is possible to manufacture items that comply with pressure vessel standards - Capable of manufacturing according to boiler structure standards, high-pressure gas safety law specific equipment inspection regulations, first-class pressure vessel structure standards, and second-class pressure vessel structure standards For more details, please contact us or download the catalog.

  • DSC_0454.jpg
  • 0.jpg
  • Gas Generator

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Casting heater

Casting heater

Everything is produced in-house from the mold. Custom-made orders are possible because of our integrated production. Leave your special orders to us!

Our company manufactures "cast heaters" by bending the heating elements and casting them into materials such as aluminum and brass. With temperature simulation, we can achieve optimal heater design, and since we handle everything from mold production to final assembly, we can create heaters that provide uniform and highly efficient heating, even for complex shapes. We also accommodate simultaneous casting of heaters and cooling pipes. 【Features】 ■ Easy temperature control ■ High thermal conductivity ■ Resistant to mechanical shock ■ Capable of flexible shape design *You can view a comprehensive catalog that includes this product by downloading the PDF.

  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Nozzle heater

Nozzle heater

This electric heater has a higher heat resistance than band heaters and can be used up to 450°C. It is also waterproof and is recommended for the tips of injection molding machines and extruders.

The nozzle heater is designed to withstand continuous operation at approximately twice the load of a standard band heater, due to the heater in the nozzle section of molding machines and other equipment being prone to early disconnection from resin adhesion, which can shorten its lifespan. While it is used for the same applications as band heaters, it offers superior heat resistance, capable of operating at temperatures up to 450°C. It is the optimal heating method for nozzles used in resin processing. 【Features】 ○ Excellent heat resistance, usable up to 450°C ○ Completely sealed design ○ Structure capable of withstanding continuous operation at approximately twice the load of standard band heaters ○ Integrates our unique heater into a specially processed block ○ Features a large capacity per unit area For more details, please contact us or download the catalog.

  • Other heaters
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Electric heater, band heater, plate heater

Electric heater, band heater, plate heater

It is a structure that releases mechanical stress caused by expansion and contraction.

Band heaters and plate heaters are equipped with unique disconnection countermeasures developed by Shin-Nichiden Heat Industry. The connection points between the terminal and ribbon wire, as well as the structure that releases mechanical stress due to expansion and contraction, intentionally divide the circuit inside the heater to lower the current value, which is a standard feature. Additionally, similar disconnection countermeasures are applied to the joint parts of the divided circuits. 【Features】 [Band Heater] ○ Can be manufactured from a minimum diameter of φ35 and a minimum width of 25mm ○ Heats by being attached to cylindrical heated objects [Plate Heater] ○ Can be manufactured from a minimum width of 20mm ○ Heats by being attached to flat surfaces of heated objects For more details, please contact us or download the catalog.

  • Other heaters
  • Heating device

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration
Self-tracing heater "TKC Series"

Self-tracing heater "TKC Series"

Prevent freezing of piping and process insulation! Prevent partial abnormal overheating and heater burn-out accidents!

The "TKC Series" is a self-regulating heating cable designed to prevent freezing in pipes and for process insulation. The cable itself is manufactured to automatically adjust its output, allowing it to respond to localized temperature changes and supply heat accordingly. Additionally, its self-regulating characteristics eliminate the risk of localized overheating and heater burnout accidents. We also offer various types, including high-temperature and explosion-proof specifications, so please feel free to consult us. 【Features】 ■ High safety ■ Low energy consumption ■ Prevention of freezing in pipes and process insulation ■ Response to localized temperature changes ■ Elimination of localized overheating *For more details, please refer to the PDF document or feel free to contact us.

  • pict03.jpg
  • cable
  • Other heaters

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Search Keywords Related to heater

COPYRIGHT © 2001-2025 IPROS CORPORATION ALL RIGHTS RESERVED.