Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 08, 2025～Nov 04, 2025
This ranking is based on the number of page views on our site.
691～705 item / All 1315 items
「VVEA、INVVEA、PSN」シリーズは、微細な霧が細部までしっかり洗浄。パーティクル除去にも好適なスプレーノズルです。
「INVVEA」シリーズは、ワンタッチでノズル部分を脱着でき、メンテナンス時間の大幅短縮に貢献します。 樹脂製なので耐薬品性にも優れエッチング液の噴霧にも適します。 「VVEA」ヘッダーは、液、空気の配管を一体型にしたコンパクト設計。取付が容易です。 「PSN」シリーズはスリットタイプの2流体スプレーノズルです。 VVEA、INVVEAと同じく強打力で噴霧し、洗浄します。 スリットノズルなので隙間なくムラなく噴霧でき、ワークから5～10mmまで近接化して使用が可能です。 ※その他のスプレーノズルも豊富にラインアップ。お見積り、特注対応など、ノズルに関するお悩みはぜひお気軽にお問合せください。電話・オンライン相談も随時受付中。
The "Automatic Lifting Device NLD" series eliminates the hassle of installing and attaching nozzles every time cleaning is done, safely cleaning deep tanks with automatic lifting.
The nozzle automatically ascends and descends while remaining installed on the device for cleaning. It is effective in sites with high cleaning frequency and manufacturing lines with many cleaning targets, reducing the hassle of attaching and preparing the nozzle. With a maximum stroke of 1.7m and a recommended tank diameter of up to about 4m, it can automatically clean large-capacity tanks, eliminating dangerous manual work. The cleaning position inside the tank is automatically detected and stopped based on the set stroke distance. By changing the cleaning position, the entire interior of large tanks can be efficiently cleaned automatically. It significantly contributes to the automation of the cleaning process, improving labor efficiency, reducing work time, and enhancing safety by avoiding dangerous tasks. *We also offer a wide range of other spray nozzles. For quotes and custom requests, please feel free to contact us with any concerns regarding nozzles. Phone and online consultations are available at any time.
The "VVP/VP/INVV, ES, KB" series is a spray nozzle that can be used effectively and without waste during cleaning, disinfection, and deodorization by controlling the liquid flow.
The "VVP/VP" and "INVV" series are cleaning spray nozzles with a fan-shaped design that evenly distributes spray during multiple sequences, allowing for water conservation and cost reduction with an appropriate number of nozzles. The INVV series allows for easy one-touch attachment and detachment of the nozzle, significantly reducing maintenance time and effort. The VVP/VP series offers a wide variety of nozzle options, expanding the choices for spray angle and flow rate. For cleaning tunnel-type conveyors, the "ES" series 360-degree rotating cleaning spray nozzle is recommended, as it can wash the entire surface evenly and without inconsistencies. The "KB" and "BIM" series are liquid-saving spray nozzles that spray a very small amount and apply it evenly. The fine mist allows for quick drying of deodorizing liquid, thereby reducing time for the next process. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.
A wide lineup of two-fluid nozzles is available, ranging from small spray volumes to large spray types. They support various applications such as viscous liquid spraying, humidity control, wastewater combustion, and steel plate cooling.
This is a comprehensive catalog featuring a lineup of two-fluid spray nozzles that can accommodate everything from fine mist applications to efficient cooling and dust suppression through large-volume spraying. Two-fluid spray nozzles are efficient for cooling, combustion, and surface treatment as they atomize liquid into fine particles. They can achieve significant effects with a small amount of liquid, and the homogeneous mist, free of coarse particles, meets the diverse needs of the field with stable performance. Among them, the highly versatile small-volume spray nozzle "BIM" series offers a "free trial rental" for certain model numbers. You can actually try them out for consideration, so please feel free to contact us. *We also have a rich lineup of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please do not hesitate to reach out. We are also available for phone and online consultations at any time.
The "JJRP/INJJX-Y/JJXP/BBXP" series achieves etching quality and reduced maintenance with a chemical-resistant spray nozzle.
The "INJJX-Y" series features a one-touch detachable conical nozzle that sprays in a circular pattern with a strong peak at the center. Even when the spray pressure is changed, the spray shape remains consistent, making it an excellent choice for etching applications with outstanding stability. Similarly, the "INVVEA" and "INOVVE" series also offer one-touch detachable nozzles, both of which allow for easy nozzle tip replacement, significantly reducing maintenance time. The "JJRP" series includes nozzles made of PTFE and PVDF, designed to maintain a uniform conical spray pattern even at low flow rates. The "JJXP" series features nozzles made of PVDF and high-temperature resistant PVC (HTPVC) for spraying aggressive chemicals. They provide a conical spray pattern with a large foreign object passage diameter, making them less prone to clogging. The "BBXP" series consists of nozzles that spray in a wide 120° circular pattern, allowing for a reduction in the number of nozzles used and cost savings. The "EJX" series includes liquid injection nozzles that promote etching through liquid agitation. The "SLNHK" series features slit nozzles that create a clean liquid curtain without bolts in the liquid flow path, making them ideal for applying etching solutions.
The "BIM/SETOV/TF/CLJ" series is a nozzle that contributes to cooling efficiency, uniform application of release agents, resolution of clogging, and removal of debris from molds.
We introduce products that enhance work efficiency and improve the environment, including cooling after heating, application of release agents, prevention of debris adhesion to molds, and ventilation and air conditioning in factories. The two-fluid spray nozzle series "BIM" and "SETOV" are suitable for cooling and application of release agents. The "BIM" series excels in uniform spraying, allowing for rapid and even cooling of heated products. The "SETOV" series has a large foreign object passage diameter, which suppresses clogging while enabling uniform application of release agents. Additionally, these products are effective as sprays for odor control, contributing to environmental improvement. For the problem of debris clogging air holes in molds, we recommend the air nozzle "TF" series, which features strong impact and high quietness. The "TF-121" sprays air at a width of 121mm, reducing the number of nozzles used and achieving cost reduction. In factories that handle chemicals at high temperatures, ventilation and air conditioning are essential. The energy-saving air conditioning system "CLJ-Dome" is in high demand for semi-outdoor and open spaces, supporting a comfortable working environment. *Other spray nozzles are also available in our lineup. Please feel free to contact us for quotes or custom orders. Phone and online consultations are also available at any time.
The ceramic "AJP/AP/JUXP/TAA" series nozzles have high heat resistance and chemical resistance, making them suitable for gas cooling and chemical spraying.
Ceramics are materials that exhibit excellent chemical resistance, wear resistance, and heat resistance compared to metals, with almost no corrosion or dissolution in chemical solutions. They also possess a very hard and wear-resistant characteristic, allowing for stable spray performance over long periods, even when spraying liquids containing sand, slurries, or abrasives, without significant changes in nozzle diameter. The "AP-AL92," "AJP-AL92," and "TAA" series are conical spray nozzles that spray at a right angle to the inlet, while the "JUXP-AL92" series sprays straight from the inlet. All of these are designed with a large foreign matter passage diameter, making them suitable for applications where clogging is a concern, in conjunction with the properties of ceramics. Among them, the "TAA" series uses SiC, which has outstanding wear resistance, and is a high-flow spray nozzle that excels in discharge devices. *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. We are also available for phone and online consultations at any time.*
The "RSP" series is a surface washing spray nozzle that effectively cleans the dirt from the rapid sand filtration sand surface with a highly directional water flow.
This is a surface washing spray nozzle designed to efficiently wash away dirt from filter sand in rapid filtration ponds at water treatment plants. It is installed at the end of the piping and generates straight jets radially from multiple injection holes underwater, blowing off and peeling away dirt adhered to the surface of the filter sand, thus preventing the accumulation of dirt. By spraying the straight water flow radially, it demonstrates high effectiveness in cleaning and agitation. The number and position of the injection holes can be customized according to requirements. Additionally, there are spray nozzles such as the "VNP" series and "JJXP" series for cleaning dirt from the surface of sand in sand washing machines (filter sand cleaning machines). *We also have a wide range of other spray nozzles available. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. We are also available for phone and online consultations at any time.
The "INVV-SS/INV" series is a spray nozzle that allows for easy replacement of the nozzle part. It facilitates a large number of nozzle replacements and reduces maintenance time.
In the surface treatment process of cold-rolled steel sheets, numerous nozzles are used, and during regular maintenance, it is necessary to remove the header for cleaning, replacement, and readjustment, which requires significant effort and time for maintenance. The "INVV-SS" series consists of an adapter part that remains in the piping and a detachable nozzle part, allowing for easy replacement of only the clogged nozzle part, effectively solving the aforementioned problem. Additionally, the nozzle part features a knurled structure that allows for attachment and detachment without tools, eliminating the need to readjust the spray angle during installation, thus significantly reducing the maintenance burden on-site. The spray nozzle has a heat resistance of 150 degrees, making it suitable for use even under high temperatures that would be impossible for resin materials. *We also offer a wide range of other spray nozzles. For quotes, custom orders, or any concerns regarding nozzles, please feel free to contact us. Phone and online consultations are available at any time.*
A tabletop coater and automatic bar coater that will rapidly accelerate your development!
The "AFA-Standard" is a development support type fully automatic applicator. It allows you to choose from a wide variety of base plates according to purpose and application, making it easy to replace and clean plates such as glass, vacuum, double-channel vacuum, and high-precision stainless steel vacuum. The vacuum automatically turns ON/OFF in conjunction with the coating operation. The vacuum pump is built-in, saving space and designed for quiet operation. 【Features】 ■ Light and efficient workability ■ Covers ultra-low to high speeds ■ High driving stability ■ Easy and accurate positioning of the coating area ■ Fully supports Japanese for intuitive operation *For more details, please refer to the PDF materials or feel free to contact us.
![Detailed explanation of research and development support equipment [Materials being distributed].](https://image.mono.ipros.com/public/product/image/06d/2000974732/IPROS48193812572784542469.png?w=280&h=280)
We are giving away a booklet that provides a detailed explanation of the "equipment and methods" that are in high demand in research and development, based on experimental results, photos, and illustrations!
Explaining the features of evaluation standards and testing equipment to enhance the effectiveness of research efficiency and presentation of research results! The development sites for secondary batteries, electrodes, and functional films are now at the center of global expectations, investments, and competition. In the intensifying global competition, isn't it the "efficiency and speed of research and development" that determines the direction and value of manufacturing? In response to your requests, we have compiled a special feature on "Research and Development Support" into one volume. There is surely useful information for your research and quality control of functional films and coatings! [Contents (partial)] ■ Automatic coating machines… Introduction of a rich lineup and features ■ Multi-applicators… Why can it be called multi? ■ Introduction of types and features of film applicators based on experimental results ■ Innovation in bar coaters = What is a wireless bar coater? ■ What are dispersion, viscosity, hardness, and the flexibility and elongation of coatings? *For more details, please refer to the PDF document or feel free to contact us.
![[SCS] Steel Coolant Nozzle](https://image.mono.ipros.com/public/product/image/c9b/2000748568/IPROS67610234171327818411.jpeg?w=280&h=280)
Flexible coolant nozzles that can be used for low, medium, and high pressure in various machine tools such as CNC lathes, machining centers, and grinding machines.
The steel coolant nozzle from SCS Corporation, made of stainless steel, does not shift due to high-pressure coolant pressure, vibrations, or impacts from chips. It can continuously supply coolant in a pinpoint manner while maintaining its position. 【Features】 ● Maintains position without shifting even with vibrations, pressure, or contact with chips during coolant supply ● High corrosion resistance due to stainless steel construction ● Compatible with water-soluble, oil, and air processing ● Can withstand pressures up to 150 MPa ● Can be installed by hand tightening up to 2 MPa (for pressures above 2 MPa, a dedicated wrench is required) ● Four types of lineups available according to required flow rate (Nozzle inner diameters: φ3, φ6, φ10.5, φ16) Additionally, because it can supply coolant in a pinpoint manner without shifting, improvements in finishing accuracy and tool longevity can also be expected. ◎ For more details, please refer to the catalog or feel free to contact us!
A ceramic nozzle for the Wonder Gun Air Blast type has made its debut!
A ceramic nozzle has been introduced as an option for the Wonder Gun air blast type. Its wear resistance has significantly improved, allowing for prolonged use. ■ Wonder Gun This air gun is widely used across various industries, powered by the air from a compressor to blow away, suck in, and transport materials. The interior of the gun features a tubular design without obstacles, eliminating any concerns about suctioned materials getting stuck inside during the suction or transport process. ■ Silent Cleaner This powerful cleaner effectively collects water, oil, sludge, grains, small gravel, metal fragments, and fish, which traditional industrial cleaners often fail to recover adequately. It is highly effective in all workplaces. *For more details, please request materials or view the PDF data available for download.
![[Patent] Pro Max Quick Jet Nozzle](https://image.mono.ipros.com/public/product/image/c0c/9455002/IPROS_17445894274344569000.jpg?w=280&h=280)
One-touch attachment and detachment of the nozzle, securely fixed with a click. Reduces time.
(1) Two series, a mini type suitable for limited installation space and a standard type with enhanced quick exchange functionality, offering a full choice from over 100 types of chips. (2) Chip replacement is as simple as a quick 90-degree turn by hand, in microseconds with a single touch. No tools required. This significantly reduces maintenance time. (3) An automatic stop mechanism that securely locks the chip in place with a single touch. The internal O-ring is integrated with the chip to prevent detachment. (4) An external O-ring (optional) prevents the adhesion and sticking of foreign substances. (5) Made of chemical-resistant and highly durable glass fiber-reinforced PP (polypropylene). The color of the chip allows for identification of flow size. Spraying Systems, a global brand of spray nozzles, offers nozzles suitable for various applications based on a proven track record of over 90,000 items. *For information about spraying nozzles, please download the PDF or contact us.
