Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 01, 2025～Oct 28, 2025
This ranking is based on the number of page views on our site.
256～270 item / All 1109 items
Press-fitting stainless fasteners into SUS304 plates, which was previously impossible!
It is now possible to produce new weld-free sheet metal from areas that could only be joined by welding.
Brass and stainless steel! Bag nut used for securing nipples and other fittings.
The "Bag Nut for Flexible Tubes" from Asō is a bag nut used for flexible tubes, which is used when securing to nipples, etc. We offer types made of brass with chrome plating and stainless steel (SUS304). Please choose according to your application. 【Features】 ■ Brass / Stainless Steel ■ Bag nut for flexible tubes ■ Material can be selected based on application *For more details, please refer to the PDF document or feel free to contact us.
The sealing nut easily fits into the pilot hole and prevents liquid leakage!
The "SEAL LOCK" is a nut with sealing functionality that provides highly reliable sealing against gases and liquids, even under high pressure. No need for bag nuts, lock nuts, or washers. The Seal Lock achieves oil leakage prevention with a single component and a single process. It saves assembly time and reduces the number of parts without losing preload force. 【Features】 ■ One-piece element ■ Effective sealing ■ High preload force ■ Sizes M6-M16 <Basic Information> ■ Seals liquids and gases simultaneously at the inner thread and under the head ■ Metal coating prevents loss of preload force ■ Withstands temperatures from 40°C to 110°C ■ Coarse and fine threads ■ Approximately 11 million units used worldwide annually *You can download the catalog. *For more details, please refer to the PDF materials or feel free to contact us.
Blind nuts that make it possible to create nuts and bolts are ideal for work where welding nuts cannot be assembled. *Performance data available.
The "Ribclay" that we handle is a load management type blind nut. It can be assembled onto thin steel plates, aluminum, magnesium, CFRP, PP, and foam molded products. Unlike welded nuts, it does not generate heat during assembly, preventing damage to surface treatments and minimizing harm to the workpiece. Additionally, the absence of heat generation prevents the release of harmful gases due to combustion. If you consult with us, we can recommend suitable part numbers from over 3,200 options based on your workpiece! Of course, we can also develop products tailored to your needs. 【Features of Ribclay】 ■ Can be assembled onto thin plates and materials other than iron where welded nuts are unsuitable ■ Assembly is possible from one direction ■ Can be assembled at any stage, before or after painting the workpiece ■ No thermal stress on the workpiece *For more details, please refer to our catalog and performance materials in PDF format or feel free to contact us.
High-strength screw insert for plastic parts
"AMTEC" is an after-molding technology used for the installation of heat-pressed screw inserts in plastic parts after molding. For customers requiring high torque and pull-out strength, we can also offer products made of iron with knurled processing. 【Features】 ■ Fewer injection molding cycles ■ No risk of damaging the injection molding die ■ No stress cracking ■ Safe, stress-free adhesion ■ Multi-directional bonding possible * You can download the English version of the catalog. * For more details, please refer to the PDF materials or feel free to contact us.
RIVKLE SFC was developed to assemble resistant threads without damaging plastics or composite materials.
SFC was developed to create resistant threads without damaging plastics or composite materials. It is designed to prevent resin from cracking when installed on resins that are most susceptible to cracking. 【Features】 The resin does not crack because it does not put stress on the edges of the product hole. Since it does not apply stress to the edges of the product hole, it does not cause delamination in CFRP. It can accommodate hole tolerances from +0.1 to +0.6, so it does not require strict hole machining accuracy. It can be adapted to locations closer to the ends. (PA66: 4.5 mm) It can also be used with materials other than CFRP, such as EPOXY CARBON, PP6.6, SMC, and PP.
Easily installable by anyone! An increase of about 40% in pull-out load is expected compared to screw threads without reinforcement.
We would like to introduce our product, "Kobsert." It is mechanically secured firmly, which can extend product life and achieve high cost-effectiveness. An estimated increase of about 40% in pull-out load is expected compared to unreinforced threads. 【Features】 ■ Used for reinforcing threads or repairing damaged threads ■ Easy to install for anyone ■ Available with a seal ring for even higher airtightness ■ Estimated increase of about 40% in pull-out load compared to unreinforced threads ■ Can extend product life and achieve high cost-effectiveness *For more details, please refer to the PDF document or feel free to contact us.
The O-ring is pre-assembled to the part, so a sealing washer and bag nut are not needed, ensuring water tightness.
General blind nuts do not ensure water tightness. The ribbed sealing ring complies with IPX7, making it ideal for use in battery trays where water tightness is required. Even with an O-ring, it supports: - Automatic feeders - Resistance from -35 to 220 degrees - Resistance to aging and liquids - High rust prevention performance - Compliance with ATEQ, IPX7, and ISO20653 Amid the global shift towards electric vehicles, we have received many inquiries regarding battery trays.
We can accommodate even very small lots! Orders placed by 2 PM will be shipped on the same day! Introducing hex nuts.
Introducing the "Hex Nut" available on the online store "Nuts Super Dot Com" of Yamamoto Tech Co., Ltd. This product can be selected from materials such as iron, brass, stainless steel, aluminum, S45C, titanium, SUS316, SUS316L, SUS310S, and SUS403. For iron, you can choose from various surface treatments including bare (raw), chromate, nickel, and more. Additionally, surface treatments suitable for each material are available. For material and pricing information, please refer to "Nuts Super Dot Com." 【Available Materials】 ■ Iron ■ Brass ■ Stainless Steel ■ Aluminum ■ S45C Others *For more details, please feel free to contact us.
We can accommodate even very small lots! Orders placed by 2 PM will be shipped on the same day! Introduction of nuts.
This is an introduction to the 'nuts' available on the online store "Nuts Super Dot Com" of Yamamoto Tech Co., Ltd. This product can be selected from materials such as iron, brass, stainless steel, aluminum, S45C, titanium, and SUS316L. For iron, you can choose from various surface treatments including raw (uncoated), chromate, nickel, and more. Additionally, surface treatments suitable for each material are available. For details on materials and prices, please refer to "Nuts Super Dot Com." 【Available Materials】 ■ Iron ■ Brass ■ Stainless Steel ■ S45C ■ Titanium ■ SUS316L *For more information, please feel free to contact us.
We can accommodate even very small lots! Orders placed by 2 PM will be shipped the same day! Introducing return-stop nuts.
This is an introduction to the "Return Stop Nut" available on the online store "Screw Super Dot Com" of Yamamoto Tech Co., Ltd. This product can be selected from materials such as iron, brass, stainless steel, S45C, titanium, SUS316, and SUS316L. For iron, you can choose from various surface treatments including bare (raw), chromate, nickel, and more. Additionally, surface treatments suitable for each material are available. Please refer to "Screw Super Dot Com" for information on materials and prices. 【Available Materials】 ■ Iron ■ Brass ■ Stainless Steel ■ S45C ■ Titanium ■ SUS316/SUS316L *For more details, please feel free to contact us.
Introduction of nickel alloy nuts and washers made from various steel grades.
At Yamamoto Tech Co., Ltd.'s online metal materials store "Metal Super Dot Com," we offer "Nickel Washers and Nuts." Our products are nickel alloy nuts and washers, with the nuts conforming to JIS B1181 Class 1 Intermediate and the washers to JIS B1256 Standard Shape Grade A. However, the M12 washer is 2mm thick. Please contact us for pricing. *For more details, please refer to the PDF document or feel free to contact us.
1412WTN-2420WTN Double T Slot Nut Super Tool
Double T-Slot Nut WTN WT-SLOT NUT Super Tool - For mounting T-slot clamps (such as power clamps and mechabite clamps). - Material: S45C - Heat treatment: HRC 23-31 - Finish: Black oxide
FTS810-FTS2432-T Slot Nut Super Tool
T-Slot Nut FTS Super Tool - When setting a stud bolt, it is crimped to prevent the bolt from protruding and damaging the machine table. - Material: S45C, Heat Treatment: HRC 23-31, Finish: Black Oxide
FTU8-FTU24 Hex Nut Super Tool
Hex Nut FTU HX NUT Super Tool - Material: S45C - Heat Treatment: Quenching HRC 23-31 - Finish: Black Oxide
