Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Dec 24, 2025～Jan 20, 2026
This ranking is based on the number of page views on our site.
241～255 item / All 1129 items
This is a flat-head type shield nut with a bag-shaped lower part. When in use, there are constraints on the bolt length (to avoid contact between the nut bottom and the bolt tip).
This is a pop nut with a bag-shaped closed lower part. It is ideal when you want to avoid damaging the inside of the workpiece with the bolt tip. It is also effective in preventing moisture and dust intrusion, as well as wiring tangles.
This is the lightest riveter that can install 3.2mm and 4.0mm rivets. *It is currently discontinued.
This is a tool for brand rivet setting. The long-loved Genesis (G) series and nG series tools have been replaced by the new XT series, which offers sizes XT1 to XT3 for different rivet sizes. The successor to the nG1 tool is the ProSet XT1.
This is a booster separation type tool for speed rivets.
This is a tool for speed riveting. It is a specialized tool for fastening items such as Bribb, Showbart, Rib Screw, and Abtronic. The 7530 model has a separate gun and booster, so during operation, you only need to hold the gun part, making it lightweight and easy to handle.
This is an all-steel type of AC rivet.
This is a cheap commercial-type rivet. It has higher strength than the Avex rivet, but it is not suitable for environments where vibrations occur. There are also longer sizes available, such as 610 and 612.
It's selling well! Quality comparable to domestic products! Taiwanese self-locking nuts with anti-loosening and anti-falling features.
Self-locking nut The friction ring crimped onto the top surface of the nut bites into the bolt thread, providing a higher locking effect compared to standard nuts. Additionally, even if the axial force decreases, the ring's effect prevents early detachment. Furthermore, no special tools are required for fastening, making it exceptionally easy to work with. Custom options for M30 and above, low-profile, and trivalent black are also available. 【Features】 ■ Exhibits high anti-loosening functionality ■ Prevents early detachment due to the effect of the ring ■ Exceptional workability as no special tools are required for fastening *For more details, please refer to the PDF document or feel free to contact us.
Promotion of lightweight manufacturing! Aluminum alloy insert nuts for CFRP that prevent galvanic corrosion.
The "Alu-Arma(R) Nut" is a nut made from aluminum alloy. It is treated with a patented special hard anodized coating on the surface, ensuring electrical insulation and effectively preventing the occurrence of electrolysis. When mounted on CFRTP containing 40% carbon fiber and evaluated using the JIS saltwater alternating immersion method, it maintains corrosion resistance for 3,000 hours. 【Features】 ■ High risk mitigation for electrolysis ■ Synergy for weight reduction ■ Strong fastening retention performance ■ Total cost reduction ■ Two basic shapes available *For data and material requests, please feel free to contact us through the Yamashina website: http://www.yamashina.ne.jp/
Further weight reduction of resin parts has been achieved! Made of aluminum alloy, it blocks radio waves, is unaffected by magnetic fields, and is suitable for electronic control!
"Alki-Pa" is a series of high-strength lightweight nuts and collars made from aluminum alloy. It is a fastener developed as a dedicated component targeting the weight reduction of resin applications. Not only is it lightweight, but it also adheres very strongly when molded into resin, achieving strength that surpasses brass and steel nuts in pull-out and rotation resistance. Additionally, due to the properties of aluminum, it blocks radio waves and is not affected by magnetic fields. It is well-suited for automobiles and robots, where weight reduction and electronic control, such as in autonomous driving, are advancing. 【Features】 - Lightweight aluminum alloy - Steel 10.9 bolts break at the threads - From inserts to outserts - Compatible with thermoplastics and thermosetting resins - Blocks radio waves and is non-magnetic *For data and material requests, please feel free to contact us through the Yamashina website: http://www.yamashina.ne.jp/
Blind riveter with long nose piece! Equipped with a vacuum adjustment dial that does not require Joe adjustment.
We would like to introduce our air/hydraulic blind riveter 'SI-715'. It is equipped with a vacuum function and does not require jaw adjustment. It comes with a long nose piece. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Capacity: 2.4φ/3.2φ/4.0φ/4.8φ ■ Stroke: 23.5mm ■ Overall length × height: 290mm × 275mm ■ Weight: 1.55kg ■ Air consumption: 1.8L/rivet *For more details, please refer to the PDF document or feel free to contact us.
Joe does not require adjustment! A blind riveter equipped with a long nose piece and vacuum function.
We would like to introduce our air/hydraulic blind riveter 'SI-725'. It features a vacuum adjustment dial and comes with a long nose piece. No jaw adjustment is required. Please feel free to contact us if you have any inquiries. 【Specifications】 ■ Capacity: 4.8φ/6.4φ/7.8φ ■ Stroke: 22.5mm ■ Overall length × height: 305mm × 310mm ■ Weight: 1.88kg ■ Air consumption: 1.8L/rivet *For more details, please refer to the PDF document or feel free to contact us.
Maximum tension value of 20,000N! Cordless with a lithium-ion battery, suitable for any work location.
The 'SI-735' handled by Shinano Kihan Co., Ltd. is a cordless blind riveter equipped with a brushless DC motor. It features an auto-reverse function and a maximum tension value of 20,000N. We offer a variety of nosepieces in sizes 3.2φ, 4.0φ, 4.8φ, and 6.4φ. 【Features】 ■ Built-in LED light ■ Forward/reverse switch button ■ Brushless DC motor ■ Battery level indicator lamp ■ Auto-reverse function *For more details, please refer to the PDF document or feel free to contact us.
![[Method Transition] Technical Document "Introduction of Mazda's Custom Metal Nut Product Cases"](https://image.mono.ipros.com/public/product/image/027/2000484641/IPROS41729840278593482497.png?w=280&h=280)
A must-see for those struggling with construction method changes! Packed with tips for VE/VA proposals specialized in metal nuts! *Free technical handbook available!
Cold forging offers higher dimensional accuracy and surface flatness compared to conventional forging processes. Our company utilizes this technology to provide high-precision and cost-effective screw components. By transitioning from other manufacturing methods to cold forging, there are various benefits such as cost reduction, shorter delivery times, and improved quality. This time, we have prepared a document featuring the characteristics of "custom metal nuts" and product examples based on the cold forging know-how we have cultivated over many years. It is full of hints for method conversion and VE/VA proposals! Please take a look! [Contents] ◎ Applications and overview of custom metal nuts ◎ VA/VE proposal examples We will introduce various types, including flange types, irregular shapes, and non-ferrous metal types. Leave the prototyping to mass production of metal nuts to Mazda!
This is an introduction to a case where aluminum is used as the material and shaping is done using a former.
Here is an example of a "flanged nut" manufactured by Special Nut & Color Manufacturing.com. The material used is aluminum, and it is shaped by a former. Due to the high demand for lightweight components, replacing nut parts made of iron with aluminum is an increasing need in automotive parts. Our product meets the requirements of our customers. 【Available Processing Sizes】 ■ Size: Flange φ21mm × Shaft φ10mm × Length 22mm ■ Material: Aluminum ■ Precision: ±0.01 ■ Application: Embedded parts for industrial machinery *For more details, please refer to the related links or feel free to contact us.
This is an example of a nut with a weld spot attached to the diamond-shaped brim.
We would like to introduce a case of a special "weld nut" processed at Special Nut & Collar Manufacturing.com. The features of this product include a diamond-shaped flange and the addition of a weld spot on the diamond-shaped flange. Our company specializes in the processing and manufacturing of special nuts and spacers, and we can propose suitable products tailored to the specifications of our customers' drawings. If you are facing difficulties with special shapes that cannot be covered by standard nuts and collars, please contact us. 【Processable Sizes】 ■ Size: 32mm × φ20mm × 9mm ■ Material: Steel *For more details, please refer to the related links or feel free to contact us.
Lead screw suitable for fast-forward mechanism.
The Change Nut DCMA type/DCMB type is a change nut with a lead angle of 45° that is not easily obtained through machining. It can efficiently convert linear motion to rotary motion and rotary motion to linear motion at a rate of 70%, and due to its large lead, it is ideal for creating fast-forward mechanisms at low rotational speeds. The multi-thread screw shafts that are combined with the change nut are formed by cold forging. The surface hardness of the tooth profile is processed to over 250HV, and with a mirror finish, the movement combined with the change nut is extremely smooth and has excellent wear resistance. Additionally, the DCMA40 type and DCMB40 type or higher are combined with cutting screw shafts. The miniature change nut is molded from oil-containing plastic, which provides wear resistance and particularly excellent lubrication performance without the need for oil. Moreover, it can maintain this performance for a long time, making it possible to be maintenance-free. For more details, please contact us.
Wall connection fittings (for steel, wood, and ALC substrates, 1/2 nut mounting fittings) allow the nut section to rotate freely even when tilted 8° in any direction.
Temporary scaffolding connection fittings for wall-to-wall connections, designed for retrofitting methods, are very convenient as they do not require welding or similar processes. They do not damage wall materials (such as siding) or cause any wear.
