Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
Last Updated： Aggregation Period:Oct 22, 2025～Nov 18, 2025
This ranking is based on the number of page views on our site.
2086～2100 item / All 3400 items
This is a standard spool-type directional control valve.
Various types of connection blocks can accommodate a wide range of applications. Various control valves can be directly attached to the switching valve body. There are many switching operation methods available, such as proportional and two-stage switching methods.
1. Cartridge check valve with a specification of 1.50MPa 2. Easy manifold processing
- The installation area has a double structure, making manifold processing easy and unaffected by installation distortion. Additionally, reassembly does not damage the processing holes of the manifold. - General commercially available processing tools can be used for manifold processing.
1. Maximum operating pressure 31.5 MPa 2. Maximum flow rate 130 L/min 3. Flow control valve with pressure compensation
- With pressure compensation, it maintains accurate flow control regardless of changes in primary and secondary pressure. Two types are available: series type (2-way) and bypass type (3-way). - The controlled flow rate can be kept constant within a slight margin of error, unaffected by operating pressure and hydraulic oil viscosity.
1. Prefill valve with a specification of 40MPa 2. Also available as a check valve for large flow rates
- This valve is used to control the direct suction of hydraulic fluid from the surge tank to compensate for the insufficient capacity of the pump during high-speed operation of large-capacity hydraulic cylinders, contributing to the miniaturization and energy saving of hydraulic pumps. - It can be directly attached to the main cylinder or easily installed in the piping using a dedicated flange, making maintenance and inspection easy. - With a maximum operating pressure of 40 MPa, it boasts excellent durability. - The pilot section can be removed, allowing it to be used as a large-capacity check valve.
It is a fuse valve that can be built into a cylinder and has high shut-off performance.
- It is widely used for safety purposes, as well as to prevent accidents and oil spills. - This valve is typically integrated into the actuator and instantly shuts off the circuit in the event of a pipe rupture, preventing actuator runaway. - There are types that provide complete shut-off and those that allow for slow descent (with orifice).
1. High flow, non-leak proportional switching valve 2. Pmax: 45MPa, Qmax: 160L/min
- It is a pilot-operated cartridge-type directional control valve with 2P/2W. - It has excellent shut-off functionality due to its non-leak conical metal seal structure. - As it is a wet-type solenoid, the switching surge is small, and the structure is less affected by external moisture due to the rubber packing and O-ring seals. - Using the proportional valve in ON-OFF mode can reduce vibrations during switching.
It is a stack-type spool direction switching valve.
The directional switching spool valve block type CWS operates directly. Various types of connection blocks can be used for a wide range of applications.
This is a standard spool-type directional control valve.
It is an ISO mounting type. Various types of connection blocks can be used for a wide range of applications.
Non-leak manual switch valve for ultra-high pressure 70MPa
- It is a ball seat type switching valve with excellent shut-off functionality. - There is a spring return method that automatically returns to the neutral position with a spring, and a detent method that stops at each switching position. - There are screw-in types for individual delivery, as well as multi-valve blocks and plate-mounted types connected by tie rods.
It is an air-driven hydraulic pump. It can be adapted for explosion-proof specifications.
This is a hydraulic pump driven by compressed air (0.2 to 0.6 MPa). The output is equivalent to 1.1 to 1.5 kW, and there are 16 types of discharge pressures ranging from 9 to 150 MPa. It is optimal as a hydraulic source in areas with explosion hazards. Additionally, it can drive portable hydraulic equipment used as emergency equipment by utilizing compressed air cylinders. The structure is a double-acting plunger pump that boosts pressure based on the area ratio of the piston on the pneumatic side to that on the hydraulic side. The automatic reciprocating motion of the piston is achieved by the pneumatic control valves at both ends of the stroke sending a reversal signal, allowing for continuous discharge. When the hydraulic pressure reaches the maximum operating pressure, the pump stops, and air consumption drops to zero; when the hydraulic pressure decreases, it automatically restarts to maintain the maximum pressure. It consumes little air and can omit components such as relief valves, unload valves, and pressure-holding circuits in the hydraulic system, making it economical. It can be combined with a pneumatic-driven seat valve to form a standard hydraulic unit.
It is a standard spool-type directional control valve.
It is an ISO (NG6, NG10) mounting type.
Balance piston type pressure relief valve
It is used when you want to limit the pressure of a part of the hydraulic circuit to a pressure lower than that of the main circuit. It is a reducing valve that can maintain the pressure on the secondary side constant against pressure changes on the primary side.
Reducing (pressure-reducing) valve without a drain port
This valve is a direct-acting pressure reducing valve, and while conventional balanced piston type pressure reducing valves require a drain port to escape internal leaks, this valve has no drain port due to its non-leak design.
Ultra-compact pressure compensation flow control valve
- It is a flow control valve that works in one direction only. - The hydraulic oil flows freely until the set flow rate is reached, and once it reaches the set value, it maintains a constant flow regardless of the differential pressure. - There is also a super compact cartridge type available. - It is a two-way flow control valve that is ideal for adjusting the speed of single-acting cylinders. - It can maintain a constant cylinder descent speed regardless of the size of the load.
Inline (piping installation) dedicated check valve
This type has three different housing shapes and can be installed in the piping system to meet any requirements, as it has threaded sections both internally and externally. These valves can also be used as foot valves in the pump's suction line due to their low response pressure.
