Suntex Co., Ltd. List of Products and Services

Features - Supports 32-bit, 5V PCI bus - Isolated 8-CH 12-bit voltage output - 2500VRMS optical isolation - Jumper-selectable bipolar and unipolar output ranges - 4-CH isolated DI, 4-CH isolated DO - Current output version available on PCI-6308A

Features - Supports 32-bit, 5V PCI bus - 32-CH DI and 32-CH DO - Maximum data transfer speed: 12Mbytes/s - Onboard internal timer pacer for clock-driven DIO - ACK and REQ signals for handshaking data transfer - Bus mastering DMA data transfer

Features - Supports 32-bit, 5V PCI bus - PCI-7250 has 8-channel relay output - 8-channel isolated digital input - LED indicators for on-board relay status - On-board relay drive circuit - Statistical feedback for relay output - Low-pass filter processing for on-board digital input - PCI-7250 is expandable, allowing up to 32-channel relay output and 32-channel digital input with three PCI-7251 units

Features - Supports 32-bit 3.3V or 5V PCI bus - 16-channel latch SPDT relay output - Relay operation power-saving function - Power off when output state is unchanged - Onboard relay status indication: LED indicator - 16-channel isolated digital input - Change of Status (COS) interrupt - Board ID

Features - Supports universal, 32-bit, 3.3V and 5V PCI bus - 32-channel long-life photo MOS relay output - 2-channel isolated digital input with interrupt function - Feedback of relay output state - Onboard LED indicators (for relay state confirmation) - Onboard connector for external LED connection - Onboard relay drive circuit - Board ID

Features - 8-channel high-power relay output (5A @ 250VAC or 30VDC) - 8-channel AC filter isolated digital input - 1-channel emergency stop input - Pluggable connector for high current input - Supports universal, 32-bit, 3.3V and 5V PCI bus - Initial state and safe state settings via DIP switches - Built-in watchdog timer

Features - Supports 32-bit 5V PCI bus - Multiple I/O port configurations: 16-CH DI & 16-CH DO, 32-CH DI or 32-CH DO - Data transfer speed: up to 80Mbytes/s - Bus mastering scatter-gather technology and DMA - Onboard internal timer pacer for clock-driven DIO - Onboard 32K word FIFO - ACK and REQ signals for handshaking data transfer - Recommended for use with system memory less than 4GB

Features ■ Output port status feedback ■ Port configuration that can be set as input or output ■ High drive capability, up to 48mA (sink) and 15mA (source) ■ 48/96CH digital TTL input/output ■ Supports 32-bit, 5V PCI bus ■ Onboard 8254 timer/counter chip ■ Change of State (COS) interrupt ■ Multiple programmable interrupt sources

◾Supports 32-bit, 5V PCI bus ◾12-bit A/D resolution (PCI-9111DG) ◾16-bit A/D resolution (PCI-9111HR) ◾16-channel single-ended analog input ◾Maximum sampling rate of 100 kS/s ◾Onboard 1 K sample A/D FIFO ◾Programmable gain of ×1, ×2, ×4, ×8, ×16 ◾Bipolar analog input range

◾Supports 32-bit, 5V PCI bus ◾12-bit A/D with sampling rate up to 110kS/s ◾16-channel single-ended or 8-channel differential input ◾Onboard A/D FIFO ◾Bipolar or unipolar analog input range ◾16-channel TTL DI and 16-channel TTL DO ◾2-channel 12-bit analog output

◾Supports 32-bit, 5V PCI bus ◾12-bit A/D resolution ◾Maximum sampling rate of 100kS/second ◾32 channels of single-ended or 16 channels of differential input ◾Onboard 1K sample A/D FIFO ◾Bipolar or unipolar analog input range ◾Programmable gain ×1, ×10, ×100 ◾Automatic analog input scan

Features 4-Channel distortion measurement based transducer input Sampling rate: up to 30kS/s Transducer input accuracy: up to 1/200,000 count full scale General-purpose analog input: 4-Channel 24-bit 3-Channel PWM output, supporting single pulse and pulse train 3-Channel encoder input, supporting CW/CCW & AB phase 2-Channel 16-bit analog output Auto-calibration function

Features - 24-bit Sigma-Delta ADC and DAC - 2-channel simultaneous sampling analog input - 2-channel simultaneous update analog output - Software sampling rate up to 432 KS/s - Programmable input range: ±40 V, ±10 V, ±3.16 V, ±1 V, ±0.316 V - Programmable output range: ±10 V, ±1 V, ±0.1 V - AC or DC input coupling, software selectable - Trigger I/O connector for external digital trigger signal

■32 bit 5V PCI bus (PCI series) ■PCI Express x1 interface (LPCIe-7230) ■Compliant with PXI PICMG2.0 Rev2.1 (cPCI-7230) ■16-CH isolated input & 16-CH isolated output (PCI-7230, LPCIe-7230, cPCI-7230) ■32-CH isolated input (PCI-7233) ■32-CH isolated output (PCI-7234) ■Input section isolation withstand voltage 5000VRMS (PCI-7230, PCI-7233) ■Output section maximum sink current 500mA (PCI-7230, PCI-7234)

Features ■ Supports 32-bit, 5V PCI bus ■ 24/48/96 CH digital TTL/DTL input/output ■ Emulates 4/2/1 industry-standard 8255 PPI (Mode 0) ■ Supports Windows 7/8 X64/X86 and Windows 2008 R2 ■ Output port status feedback ■ Onboard 8254 timer/counter chip ■ Programmable interrupt source ■ (Direct interface with OPTO-22) Provides 12V and 5V power supply to OPTO-22

■32 bit 3.3V or 5V PCI bus (PCI series) ■Compliant with PXI Rev2.2 (PXI series) ■16-bit A/D with a maximum continuous sampling rate of 10/20/40MS/sec ■4CH single-ended input ■512MB onboard memory ■Fully automatic calibration ■Multiple card synchronization

Features - PICMG 2.0 Revision 2.1 - 32-Channel Isolated Digital Input & 32-Channel Isolated Digital Output (cPCI-7432) - 64-Channel Isolated Digital Input (cPCI-7433) - 64-Channel Isolated Digital Output (cPCI-7434) - Input section insulation withstand voltage 5000 VRMS - Output section maximum sink current 500 mA - Available rear I/O on PCI-7432R, 7433R, 7434R

Features - 6U CompactPCI form factor, 32-bit CompactPCI compliant (PICMG2.0 Rev2.1) - Pulse output rate up to 6.5 MHz - Pulse output options: OUT / DIR, CW / CCW - Linear interpolation for 2 to 4 axes - Circular interpolation for 2 axes - Multi-axis continuous interpolation - Programmable acceleration and deceleration time - Trapezoidal and S-curve speed profiles

Features - PICMG 2.0 Rev 2.1 - Operation of two independent CAN networks - Programmable transfer speed up to 1 Mbps - CAN controller frequency 16 MHz - 2500 VRMS optical isolation - Direct memory mapping to the CAN controller - Powerful master interface for CAN bus protocol - Rear I/O available on cPCI-7841R

Features - PICMG 2.0 Rev 2.1 - 4/8 asynchronous communication ports (intelligent buffer) - 3/4 RS-232 ports and one isolated RS-422/485 port (isolation voltage 2500 VRMS) - TXD/RXD signal line surge protector - Supports two cards per system - Robust DB-37 connector (cPCI-3534) - Robust DB-62 connector (cPCI-3538) - Available rear I/O on cPCI-3534R/cPCI-3538R

Features ■ 32 bit 5V PCI bus (PCI-7432/7433/7434) ■ 32-channel isolated input & 32-channel isolated output (PCI-7432 & PCI-7432HIR) ■ 64-channel isolated input (PCI-7433 & PCI-7433HIR) ■ 64-channel isolated output (PCI-7434) ■ Input section isolation withstand voltage 2500VRMS (PCI-7432, PCI-7433) ■ Output section maximum sink current 500mA (PCI-7432, PCI-7434)

◾ Supports 32-bit, 5V PCI bus ◾ 16-bit A/D resolution ◾ Maximum sampling rate of 100 kS/s (PCI-9114DG) ◾ Maximum sampling rate of 250 kS/s (PCI-9114A-DG and PCI-9114A-HG) ◾ 32 channels of single-ended or 16 channels of differential analog input ◾ Bipolar or unipolar analog input range ◾ Onboard 1 K sample A/D FIFO ◾ Programmable gain: ×1, ×2, ×4, ×8 (PCI-9114DG and PCI-9114A-DG), and ×1, ×10, ×100 (PCI-9114HG and PCI-9114A-HG)

Features ◾ Standard height and half-length PCI form factor ◾ 4CH simultaneous sampling single-ended analog input ◾ 16-bit high-resolution A/D converter ◾ Maximum sampling rates of 10MS/s, 20MS/s, and 40MS/s per channel ◾ 512MB onboard memory for data storage ◾ Software-selectable input impedance of 50Ω or 1MΩ ◾ Programmable input voltage ranges: ±1V, 0.2V, and ±5V, ±1V ◾ Synchronization of multiple modules via SSI

Features - Supports 32-bit 3.3V/5V PCI bus - Low-profile PCI MD1 form factor - Fully compatible with IEEE 488 standard - Data transfer rate: up to 1.5MB/s - Built-in 2KB FIFO read/write operations - Provides API compatible with NI-488.2* driver software - Supports industrial standard VISA library - Interactive utility for testing and diagnostics

Features ■ Supports 3.3V or 5V PCI bus 32-bit ■ 16-channel isolated digital input and 16 isolated digital output ■ Optical isolation: 2500 Vrms ■ Isolated current output per sink: 500mA ■ Two external interrupt sources ■ Compact, low-profile PCI size

Features - Supports 32-bit, 3.3V or 5V PCI bus - 8-CH SPDT - 8-channel isolated digital input - Non-latching relay - Onboard relay status indicator LED - Onboard relay drive circuit - Relay output status feedback

Features - Compliant with PCI Express [x4] - High-speed image transfer rate: 800MB/s - Industrial screw-lock connector - Channel status LED - 4 isolated digital input/output - 4 isolated TTL level programmable trigger output pulses

Features - 2-CH IEEE1394b (FireWire 800) port - PCI Express [x1] compliant - High-speed image transfer rate: 800MB/s - Industrial screw-lock connector - Channel status LED - IEEE1394b power supply connector

Features ■ PCI Express [x1] interface ■ 48/96-CH digital TTL/DTL input/output ■ Emulates 4/2/1 industry-standard 8255 PPI (Mode 0) ■ Direct interface with OPTO-22 compatible I/O modules ■ Output port status feedback ■ Onboard 8254 timer/counter chip ■ Programmable interrupt source ■ Supports Windows 7/8 X64/X86 and Windows 2008 R2

◾x1 PCI Express interface ◾64-channel single-ended or 32-channel differential analog input ◾Onboard 1K sample A/D FIFO ◾Bipolar or unipolar analog input range ◾Programmable gain: x1, x2, x4, x5, x8, x10, x20, x40, x50, x200 (DAQe-2204); x1, x2, x4, x8 (DAQe-2205 & DAQe-2206) ◾512-configurable channel gain queue ◾2-channel 12-bit waveform generation analog output

◾ x1 PCI Express interface ◾ Onboard 1K sample A/D FIFO ◾ Bipolar or unipolar analog input range ◾ Programmable gain: ×1, ×2, ×4, ×8 ◾ 512 configuration channel gain queue ◾ 2-CH 12-bit waveform generation analog output (DAQe-2214) ◾ Onboard 1K sample D/A FIFO (DAQe-2214)

◾x1 PCI Express interface ◾Hardware-based arbitrary waveform generation ◾Onboard 8K sample D/A FIFO (DAQe-2501); Onboard 16K sample D/A FIFO (DAQe-2502) ◾Programmable bipolar or unipolar analog output on a channel-by-channel basis ◾Programmable internal or external reference source on a channel-by-channel basis ◾8-CH 400 kS/s 14-bit single-ended analog input (DAQe-2501) ◾4-CH 400 kS/s 14-bit single-ended analog input (DAQe-2502) ◾24-CH TTL digital input/output ◾2-CH 16-bit general-purpose timer/counter

◾High-speed PCI Express X1 interface ◾Extension distance: up to 7 meters (extension cables: 1M, 3M, 7M) ◾Comprehensive hardware and software transparency

◾ x1 PCI Express interface ◾ Multiple I/O port configuration: 16-channel DI & 16-CH DO, 32-channel DI or 32-channel DO ◾ Data transfer speed: 80MB/s ◾ Scatter-gather technology and DMA bus mastering ◾ Onboard internal timer for DIO driven pace clock ◾ Onboard 32K words FIFO ◾ ACK and REQ signals support handshaking data transfer.

◾ x1 PCI Express interface ◾ External clock or internal timer maximum clock rate: 50MHz to 100MHz ◾ Maximum processing capacity of 200MB/s ◾ Software-selectable voltage levels: 1.8V, 2.5V, 3.3V ◾ Input/output direction selectable per group (8 bits) ◾ Supports programmable serial interfaces for communication with external devices via I2C and SPI ◾ Supports vertical and horizontal sync triggers for parallel digital image capture ◾ 8-channel auxiliary programmable I/O

◾Up to 8/16/24/32-CH. 8/16-CH for DI・DO with a maximum of 100MHz. Maximum of 200MHz in external clock mode for DI. ◾Maximum throughput of 400MB/s. ◾Voltage levels can be selected via software from 1.8V, supporting 2.5V and 3.3V. ◾80 levels of phase shift in external clock mode. ◾Input/output direction can be selected for each group (8 bits). ◾Support for programmable serial interfaces I2C and SPI for communication with external devices. ◾Flexible handshake and external digital trigger mode. ◾8-channel auxiliary programmable I/O.

◾x1 PCI Express interface ◾16-channel isolated digital input and 16-channel isolated digital output ◾2500 Vrms optical isolation ◾Sink current: up to 500mA isolated output ◾Two external interrupt sources ◾Compact, low-profile PCI size

◾ x1 PCI Express interface ◾ 4 channels of TTL digital input and 4 channels of TTL digital output ◾ Bipolar analog output range ◾ 16 channels of voltage output (PCIe-6216V-GL) ◾ 8 channels of voltage output (PCIe-6208V-GL) ◾ 16-bit D/A converter resolution

Features ◾ Maximum sampling rate of 200 MS/s ◾ High-resolution 14-bit ADC ◾ Analog input (up to 90 MHz bandwidth) ◾ 1GB onboard storage memory ◾ High-speed PCI Express x4 bus interface ◾ Scatter-Gather DMA data transfer for high-speed data streaming ◾ Digital trigger input/output terminals

Features ◾ Compliant with PXI Express Specification Revision 1.0 ◾ Supports 200 MS/s sampling rate and two simultaneous analog inputs with high-resolution 14-bit ADC ◾ Supports analog input up to 90 MHz bandwidth ◾ Equipped with 1 GB of storage memory ◾ Programmable input voltage ranges: ±0.2V, ±2V, ±10V ◾ Includes external digital trigger input/output terminals ◾ Full auto-calibration function included ◾ Supports signal averaging function

Features ◾ Maximum 80MS/s sampling and support for 4-channel simultaneous analog input ◾ High-resolution 12-bit ADC ◾ Analog input (maximum bandwidth 40MHz) with 1GB storage memory ◾ Input voltage range (programmable): ±0.5V, ±1V, ±5V, ±10V ◾ High-speed data streaming support via DMA data transfer scatter-gather ◾ Provides 10/20MHz digital onboard filter (FPGA) ◾ Provides PLL module for accurate synchronization

Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)

Features ◾ 24-bit Sigma-Delta ADC ◾ 8CH simultaneous analog input ◾ Maximum sampling rate 192KS/s ◾ Input range ±1V - 10V ◾ Dynamic range 110dB ◾ Anti-aliasing filter ◾ Input coupling AC/DC (software selectable) ◾ IEPE - 4mA (software configurable)

Features ■ Supports CVBS, S-Video, RGB, and YPbPr video inputs ■ Uncompressed 1920x1080, 60 fps video stream ■ Supports HDMI/DVI video and HDMI, S/PDIF audio inputs ■ Compliant with PCI Express [x4] ■ Supports 24-bit RGB or YUV 4:4:4 ■ HDCP support (High-bandwidth Digital Content Protection) ■ Supports 32/64-bit direct SDK

Features ■ Uncompressed 1920x1080, 60 fps video stream ■ Supports both digital and component analog video inputs ■ Compliant with PCI Express [x4] ■ Hardware color space conversion ■ Equipped with 512MB DDR2 SDRAM frame buffer memory ■ Configurable EDID ■ 4 TTL digital inputs/outputs and 1 trigger output