Suntex Co., Ltd. List of Products and Services

■Read/Write Speed (Max) 550/530MB/s (HF3-25UA(8-ch) SLC) ■Read/Write Speed (Max) 550/530MB/s (HF3-25UA(8-ch) pSLC) ■Read/Write Speed (Max) 560/500MB/s (HF3-25UA(8-ch) MLC) ■Capacity 32GB–256GB (HF3-25UA(8-ch) SLC) ■Capacity 32GB–1TB (HF3-25UA(8-ch) pSLC) ■Capacity 64GB–2TB (HF3-25UA(8-ch) MLC) ■TRIM, SMART, GPIO Support ■Latest encryption technology AES-256 hardware encryption support

■Read/Write Speed (Max) 500/140MBs (SLC) ■Read/Write Speed (Max) 530/195MBs (pSLC) ■Read/Write Speed (Max) 515/180MBs (MLC) ■Capacity 1GB–64GB (SLC) ■Capacity 2GB–128GB (pSLC) ■Capacity 4GB–256GB (MLC) ■TRIM, SMART Support ■GPIO Support

■Read/Write Speed (Maximum) R: 2500 MB/s; W: 1500 MB/s ■Capacity 128GB ~ 1TB ■Supports NVMe high-speed protocol ■PCIe Gen3x4 ■Uses 112-layer BiCS5 3D TLC flash

Features ■ Read/Write Speed (Maximum) R: 1,600MB/s; W: 1,000MB/s ■ Capacity 120GB (128GB) to 480GB (512GB) ■ Supports NVMe high-speed protocol ■ PCIe Gen 1/2/3 ■ Uses Toshiba’s BiCS3 Toggle TLC flash

Features ■ Read/Write Speed (Maximum) R: 1,600MB/s; W: 1,100MB/s ■ Capacity 120GB to 1TB ■ Supports NVMe high-speed protocol ■ PCIe Gen 1/2/3 ■ Uses 3D TLC (BiCS3) flash

Features ■Read/Write Speed (Maximum) R: 1,600MB/s; W: 1,000MB/s ■Capacity 30GB to 512GB ■Supports NVMe high-speed protocol ■PCIe Gen 1/2/3 ■Uses 3D TLC (BiCS3) flash

Features ■ Read/Write Speed (Maximum) R: 3,450MB/s; W: 1,000MB/s ■ 120GB to 1920GB ■ Supports NVMe high-speed protocol ■ PCIe Gen 1/2/3 ■ Uses BiCS3 TLC NAND flash

Features ■ Read/Write Speed (Maximum) R: 1,600MB/s; W: 1,100MB/s ■ 120GB to 1TB ■ Supports NVMe high-speed protocol ■ PCIe Gen 1/2/3 ■ Uses BiCS3 TLC NAND flash

Features ■Read/Write Speed (Maximum) R: 1,600MB/s; W: 1,000MB/s ■32GB to 512GB ■Supports NVMe high-speed protocol ■PCIe Gen 1/2/3 ■Uses Toshiba BiCS3 TLC ■Equipped with SMART functionality

Features ■Read/Write Speed (Maximum) R: 520MB/s; W: 195MB/s ■1GB to 64GB (SLC), 2GB to 128GB (pSLC), 4GB to 256GB (MLC) ■Achieves larger capacity and lower cost than SLC through pSLC technology ■Control via hardware or software GPIO ■Power Loss Protection (PLP) function enables recovery during power outages ■After quick erase, the SSD can return to its original state using MP tools ■Equipped with SMART functionality *Power-Loss Protection (PLP) is a scheme designed to prevent data loss during sudden power outages while the SSD drive is being programmed or written. It can handle unexpected power failures or system crashes.

Features ■32GB to 256GB (SLC), 16GB to 512GB (pSLC), 4GB to 256GB (MLC) ■Achieves larger capacity and lower cost than SLC through pSLC technology ■Control via hardware or software GPIO ■Supports recovery during power outages with Power Loss Protection (PLP) feature ■After quick erase, the SSD can be restored to its original state using MP tools ■Equipped with SMART functionality *Power-Loss Protection (PLP) is a scheme designed to prevent data loss during sudden power-off while the SSD drive is being programmed or written. It can handle unexpected power outages or system failures due to power loss.

Features ■32GB to 256GB (SLC), 32GB to 1TB (pSLC), 64GB to 2TB (MLC) ■Achieves larger capacity and lower cost than SLC through pSLC technology ■Control via hardware or software GPIO ■Power Loss Protection (PLP) function allows for recovery during power outages ■After quick erase, the SSD can be restored to its original state using MP tools ■Equipped with SMART functionality *Power-Loss Protection (PLP) is a scheme designed to prevent data loss during sudden power-off while the SSD drive is being programmed or written. It can address unexpected power outages or system failures due to power interruptions.

Features ■ 240GB to 3840GB ■ Control via hardware or software GPIO ■ After quick erase, the SSD can be restored to its original state using MP tools ■ Equipped with SMART functionality

Features ■ Compliant with SATA Revision 3.1 ■ Available in capacities up to 16TB (120GB to 15360GB (16TB)) ■ Based on 3D TLC NAND flash, achieving high performance with up to 550MB/s read and 530MB/s write speeds ■ No LPM support ■ Supports hardware write protection feature (optional) ■ Supports hardware quick erase feature (optional) ■ Supports the following hardware power loss protection (optional) Protects against data loss during write operations, even for the last data, when power is suddenly cut off. Additional polymer tantalum capacitors hold up for a few milliseconds to maintain the writing of DRAM data to NAND flash.

Features ■ Compliant with SATA Revision 3.1 ■ Available in capacities up to 2TB (3D TLC: 64GB to 2TB, 3D pSLC: 32GB to 512GB) ■ Achieves high performance with up to 550MB/s read and 530MB/s write based on 3D TLC NAND flash ■ Supports hardware write protection feature (optional) ■ Supports hardware quick erase feature (optional) ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)

Features ■ Compliant with SATA Revision 3.2, SATA I/II/III (1.5/3/6Gbps) ■ Available in capacities up to 2TB (SLC: 32GB–256GB, MLC: 64GB–2TB, 2D pSLC: 32GB–1TB, 3D TLC: 128GB–2TB) ■ Achieves high performance with up to 550MB/s read and 530MB/s write based on Toshiba NAND flash ■ Dimensions: 100.1mm (L) x 69.85mm (W) x 7mm (H) ■ Supports hardware write protection feature (optional) ■ Supports hardware quick erase feature (optional) ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protection coating) ■ Supports the following hardware power loss protection (optional) Protects against data loss during write operations even with the last data when power is suddenly cut off. Additional polymer tantalum capacitors hold up DRAM data for several milliseconds to maintain writing to NAND flash.

Features ■ Compliant with SATA Revision 3.2, SATA I/II/III (1.5/3/6Gbps) ■ Available in capacities up to 2TB (SLC: 8GB–128GB, MLC: 4GB–512GB, 2D pSLC: 2GB–256GB, 3D TLC: 32GB–1TB, 3D pSLC: 8GB–256GB) ■ Achieves high performance with up to 550MB/s read and 500MB/s write based on 2D/3D NAND flash ■ Dimensions: 100.1mm (L) x 69.85mm (W) x 7mm (H) ■ Supports hardware write protection function (optional) ■ Supports hardware quick erase function (optional) ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)

Features ■ Compliant with SATA Revision 3.2, SATA I/II/III (1.5/3/6Gbps) ■ Available in capacities up to 2TB (3D TLC: 60GB–2TB, 3D pSLC: 16GB–512GB) ■ Achieves high performance with up to 550MB/s read and 500MB/s write based on 3D TLC NAND flash ■ Dimensions: 100.1mm(L) x 69.85mm(W) x 7mm(H) ■ Supports hardware write protection feature (optional) ■ Supports hardware quick erase feature (optional) ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protection coating) ■ Secure Erase ■ Supports the following hardware power loss protection (optional) Protects against data loss during write operations even with the last data when power is suddenly cut off. Additional polymer tantalum capacitors hold up for several milliseconds to maintain DRAM data writing to NAND flash.

Features ■Supports SATA Revision 3.2, SATA Gen3/Gen2/Gen1 ■Available in capacities up to 1TB (3D TLC: 64GB to 1TB, 3D pSLC: 32GB to 128GB) ■Achieves high performance with up to 550MB/s read and 500MB/s write based on 3D TLC NAND flash ■Dimensions: 36.4(L) x 42.8(W) x 3.3(H) ■S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■Conformal coating (insulation protection coating) ■Optional DEVSLP (Device Sleep) feature available

Features ■ SATA Revision 3.2, SATA Gen3/Gen2/Gen1 interface ■ Available in capacities up to 2TB (3D TLC: 64GB to 2TB, 3D pSLC: 32GB to 256GB) ■ Based on 3D TLC NAND flash, achieving high performance with up to 550MB/s read and 510MB/s write speeds ■ Dimensions: 50.8(L) x 29.85(W) x 4(H)mm ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)

Features ■ SATA Revision 3.2, SATA Gen3/Gen2/Gen1 interface ■ Available up to 2TB SLC: 8GB to 128GB, MLC: 4GB to 1TB, 2D pSLC: 2GB to 256GB 3D TLC: 32GB to 1TB, 3D pSLC: 8GB to 256GB ■ Achieves high performance with up to 550MB/s read and 500MB/s write based on 3D TLC NAND flash ■ Dimensions: 50.8(L) x 29.85(W) x 4(H)mm ■ Supports hardware write protection function (optional) ■ Supports hardware quick erase function (optional) ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)

■6U VPX SATA III Industrial SSD ■Capacity 1TB to 32TB ■Read/Write Speed (Maximum) 530/500MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 4,000,000 hours

■3U VPX SATA III Industrial SSD ■Capacity MLC 512GB to 10TB, SLC 256GB to 2TB ■Read/Write Speed (Maximum) 530/500MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,500,000 hours

■2.5-inch SATA III Industrial SSD ■Capacity MLC 256GB to 2TB, SLC 128GB to 1TB ■Read/Write Speed (Maximum) 520/450MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 4,000,000 hours

■2.5-inch SATA III Industrial SSD ■Capacity MLC 2TB to 8TB ■Read/Write Speed (Maximum) 540/500MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 1,500,000 hours

■Half-slim SATA Industrial SSD ■Capacity: MLC 32GB to 1TB, SLC 16GB to 256GB ■Read/Write Speed (Max): 520/440MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature: -40 to 85℃ ■Vibration Resistance: 16.4G (10-2000Hz), Shock Resistance: 1,500G (0.5ms)/50G (11ms) ■MTBF: 3,000,000 hours

■mSATA Industrial SSD ■Capacity MLC 32GB to 1TB, SLC 16GB to 256GB ■Read/Write Speed (Maximum) 550/400MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,000,000 hours

■M.2 2280 Industrial SSD ■Capacity MLC 32GB to 1TB, SLC 16GB to 256GB ■Read/Write Speed (Maximum) 500/440MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,000,000 hours

■M.2 2260 Industrial SSD ■Capacity MLC 32GB to 1TB, SLC 16GB to 256GB ■Read/Write Speed (Maximum) 500/440MBs ■Supports SMART, TRIM, NCQ, AES 128bit/256bit ■Power failure, overvoltage, overcurrent protection ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,000,000 hours

■2.5-inch industrial SSD ■Capacity: 16GB, 32GB, 64GB, 128GB, 256GB ■64MB SDRAM cache ■Read/Write speed: 200/100MBs (maximum) ■Operating temperature: -40 to 85℃ ■Vibration resistance: 20G, shock resistance: 1,500G ■MTBF: 1,500,000 hours

■2.5-inch industrial SSD ■Capacity MLC 4GB to 1TB, SLC 1GB to 128GB ■Read/Write speed (maximum) 100/90MBs ■Operating temperature -40 to 85℃ ■Vibration resistance 20G (7-2000Hz), shock resistance 2,000G (0.3ms half wave) ■MTBF 3,000,000 hours

■2.5-inch Industrial SSD ■Capacity: 8GB, 16GB, 32GB, 64GB, 128GB ■64MB SDRAM Cache ■Read/Write Speed: 250/220MBs (maximum) ■Operating Temperature: -40 to 85℃ ■Vibration Resistance: 20G, Shock Resistance: 1,500G ■MTBF: 1,500,000 hours

■2.5-inch industrial SSD ■Read/Write speed 120/90MBs (maximum) ■Operating temperature -40 to 85℃ ■Vibration resistance 20G, shock resistance 1,500G ■MTBF 1,000,000 hours

■2.5-inch industrial SSD ■Read/Write speed 120/110MBs (maximum) ■Operating temperature -40 to 85℃ ■Vibration resistance 20G, shock resistance 1,500G ■MTBF 1,000,000 hours

■Industrial CF Card ■Read/Write Speed (Max) 95/90MBs ■CFA 4.1, ATA-6 compliant ■Supports True IDE, PC Card Memory, I/O mode ■Durability 2,000,000 write/erase cycles (@25℃, SLC) ■Data Retention 10 years ■Operating Temperature -40 to 85℃ ■Vibration Resistance 20G, Shock Resistance 2,000G ■MTBF 3,000,000 hours

■Industrial CFast card ■Read/Write speed (maximum) 160/110MBs ■Data retention 10 years ■Operating temperature -40 to 85℃ ■Vibration resistance 20G, shock resistance 2,000G ■MTBF 3,000,000 hours

■Industrial CFast Card ■Read/Write Speed (Max) 165/150MBs ■Data Retention 10 years ■Operating Temperature -40 to 85℃ ■Vibration and Shock Resistance 20G, 2,000G ■MTBF 3,000,000 hours

■2.5-inch SATA II Industrial SSD ■Read/Write Speed (Max) 240/145MBs (MLC) ■Read/Write Speed (Max) 240/180MBs (SLC) ■TRIM Support ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,000,000 hours

■Half-rim SATA Industrial SSD ■Read/Write Speed (Max) 240/145MBs (MLC) ■Read/Write Speed (Max) 240/180MBs (SLC) ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,000,000 hours

■mSATA Industrial SSD ■Read/Write Speed (Max) 240/145MBs (MLC) ■Read/Write Speed (Max) 240/180MBs (SLC) ■TRIM Support ■Operating Temperature -40 to 85℃ ■Vibration Resistance 16.4G (10-2000Hz), Shock Resistance 1,500G (0.5ms)/50G (11ms) ■MTBF 3,000,000 hours

■2.5-inch SATA III industrial SSD, 3D TLC / 3D pSLC ■SATA 3.1, 6Gbps compatible ■DevSleep, S.M.A.R.T features ■Capacity TLC; 32GB to 2TB, pSLC; 20GB to 640GB ■Excellent Power Shield feature to protect data write integrity in case of sudden power failure ■MTBF: over 2,000,000 hours ■Supports SMART, TRIM features ■Operating temperature 0°C to 70°C / -40°C to 85°C

■2.5-inch SATA III industrial SSD, MLC ■SATA III, 6Gbps compatible ■Supports SMART, Security & TRIM functions ■Capacity MLC; 32GB to 1TB, Turbo MLC; 16GB to 512GB ■Excellent Power Shield function to protect data write integrity in case of sudden power failure ■MTBF over 2,000,000 hours ■Supports SMART and TRIM functions ■Operating temperature 0°C to 70°C / -40°C to 85°C

Features ■ SATA Revision 3.1, SATA 1.5Gbps, 3Gbps, and 6Gbps interface ■ Capacity 3D TLC: 120GB to 240GB ■ Dimensions: 42(L) x 22(W) x 3.8(H) ■ Achieves high performance with up to 550MB/s read and 340MB/s write based on Toshiba's NAND flash ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protection coating) ■ Thermal throttling ■ OPAL (Self-Encrypting Drive) ■ Supports the following hardware power loss protection (optional) Protects against data loss even for the last data during write processing when the power suddenly goes out. Additional polymer tantalum capacitors hold up DRAM data for several milliseconds to maintain writing to NAND flash.

Features ■ SATA Revision 3.2, SATA Gen3/Gen2/Gen1 interface ■ Capacity 3D TLC: 64GB to 1TB, 3D pSLC: 32GB to 256GB ■ Dimensions: 42(L) x 22(W) x 3.8(H) ■ Based on 3D-TLC NAND flash, achieving high performance with up to 550MB/s read and 340MB/s write ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)

Features ■ SATA Revision 3.2, SATA 1.5Gbps, 3Gbps, and 6Gbps interface ■ Capacity SLC: 8GB to 64GB, MLC: 4GB to 512GB, 2D pSLC: 2GB to 256GB 3D TLC: 32GB to 1TB, 3D pSLC: 8GB to 128GB ■ Dimensions: 42(L) x 22(W) x 3.8(H) ■ Achieves high performance with up to 550MB/s read and 490MB/s write based on 2D/3D NAND flash ■ S.M.A.R.T (Self-Monitoring, Analysis, and Reporting Technology) ■ Conformal coating (insulation protective coating)