ヴァーダー・サイエンティフィック株式会社 List of Products and Services

The "PM100" is a planetary ball mill capable of grinding and mixing samples ranging from soft to super hard, including brittle and fibrous materials. It can be used for both dry and wet grinding, achieving uniform grinding down to submicron levels in a short time. By combining orbital and rotational motion, it demonstrates powerful grinding capabilities that are impossible with conventional ball mills. An optional internal pressure and temperature measurement system called "PM GrindControl" is available. 【Features】 ■ Powerful and rapid grinding down to submicron levels ■ High reproducibility by controlling energy and speed ■ Capable of long continuous operation ■ Supports both dry and wet grinding methods ■ Safety slider that prevents operation unless the clamp is attached ■ FFCS technology absorbs equipment vibrations, making it safe to place on experimental tables ■ Counterbalance mounted on an inclined rail to correct the height of the jar's center of gravity ■ Interactive condition input with a single button and LCD screen ■ Rear fan in the grinding chamber for air cooling of the grinding jar ■ Up to 10 grinding conditions can be registered ■ Grinding start time can be set with a timer *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Cryomill" is a ball mill designed for cryogenic grinding. It features a cooling system integrated with a liquid nitrogen container that cools the material from pre-freezing to cryogenic grinding using liquid nitrogen. This process embrittles the samples, reducing losses for volatile materials. The automatic cooling system adjusts to maintain a constant temperature of -196°C, supplying only the necessary amount of liquid nitrogen to the system. Additionally, the design ensures that operators do not come into direct contact with liquid nitrogen during the pre-freezing and grinding processes, enhancing safety. Dry grinding at room temperature and wet grinding are also possible. It is an ideal grinder for processing samples up to 20ml. 【Features】 - Powerful grinding through impact and friction - Supports cryogenic grinding, dry grinding, and wet grinding at room temperature - Safe operation with direct supply of liquid nitrogen from a sealed self-pressurized container - A wide variety of jar and ball sizes and materials available - Up to 9 grinding conditions can be registered - Programmable pre-freezing and grinding times (10 seconds to 99 minutes) - For preventing iron contamination, ceramic (zirconia) grinding jars can be used *For more details, please refer to the PDF documentation or feel free to contact us.

• Crusher
• Homogenizer

The "High Energy Ball Mill Emax" is an experimental grinding machine that generates high energy with its unique jar design and high-speed rotation of 2000 rpm. By adopting a water cooling system, it efficiently grinds samples with powerful energy while preventing overheating. The special shape of the grinding jar ensures that samples are uniformly ground, resulting in a sharp particle size distribution. It allows for continuous grinding without the need for cooling intervals to prevent overheating during grinding, dramatically reducing grinding time. This enables efficient grinding, making it suitable for mechanical alloying and nano-level fine grinding. 【Features】 ■ Rapid grinding at ultra-high speed of 2000 rpm ■ Continuous operation without cooling intervals due to the water cooling system ■ High mixing capability of samples with a special jar shape, resulting in sharp particle size distribution ■ Patented drive concept ■ Easy operation via a touch panel, with the ability to register up to 10 grinding conditions ■ Two jars can be mounted easily ■ Grinding jars with safety closures ■ Choice of materials for grinding jars to prevent contamination *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Disk Mill DM 400" is a comfort type of the "DM 200" and can finely grind medium-hard, hard, and brittle samples down to 0.05mm in just a few minutes. The auto-lock mechanism for the collection container and grinding chamber, along with motor-driven gap width adjustment, features a digital display that excels in safety and operability. The display is user-friendly, allowing all parameters to be easily understood at a glance. Additionally, its robust design makes it suitable for use not only in laboratories and pilot plants but also in tough environments such as raw material quality control. 【Features】 ■ High processing capacity ■ Digital display allows gap width adjustment in 0.05mm increments ■ TFT display with a sturdy membrane keyboard ■ Large removable feeder with smooth inner walls for easy cleaning ■ Zero point adjustment ensures high reproducibility even with worn grinding discs ■ Smooth inner wall surface for easy cleaning, leaving no residue ■ Grinding chamber is sealed with additional sealing ■ Easy removal of grinding set ■ Optional resin coating *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Disk Mill DM200" is designed for batch or semi-continuous coarse and fine grinding of brittle samples ranging from medium-hard to hard, with a Mohs hardness of up to 8. Samples are crushed through the pressure and friction between two disks. The gap width between the disks can be adjusted continuously from 0.1 to 5 mm. Due to its robust structure, it can be used not only in analytical laboratories but also in pilot plants, making it suitable for online quality control of raw materials in production environments. 【Features】 - High processing capacity - High reproducibility with adjustable gap width between disks - Large and open grinding chamber for easy cleaning - Long-lasting grinding set - Material selection to prevent contamination - Equipped with a dust extraction module - Can be combined with the Jaw Crusher BB200 for bulk sample grinding *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Vibration Disk Mill RS 300 XL" can grind medium-hard, hard, brittle samples, and fibrous samples to an analyzable particle size in a short time while minimizing sample loss. It also supports simultaneous processing of multiple samples (1 to 4). With a robust universal drive shaft, it can handle grinding sets of up to 30 kg. Samples are ground in a sealed state, allowing for safe operation. Designed to be robust, it is used in a wide range of fields including geology, mining, metals, cement, and thermal power plants. It demonstrates excellent performance in achieving final particle size and grinding processing time for sample preparation in spectroscopic analysis. 【Features】 - Uniform and reproducible sample preparation enabled by the universal drive shaft - Automatic reversal function (left/right rotation) - Interval setting function (automatic start/stop) - Choice of materials for grinding sets - Sealed/soundproof grinding chamber - Grinding jars are securely fixed with pneumatic pressure for convenience and safety - Optional automatic lifter makes it easy to set heavy grinding jars *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Vibration Disk Mill RS 200" is a grinding machine that can quickly and efficiently grind medium-hard, hard, brittle, and fibrous samples to a particle size suitable for analysis, with high reproducibility and no loss of material. It crushes samples in 1 to 3 minutes using pressure, impact, and grinding forces. The grinding set can be securely fixed to the vibration plate with a one-touch lever. The vibration plate rotates horizontally at 700 to 1500 rpm. Additionally, the grinding sets are available in chrome steel, tungsten carbide, agate, and zirconia, allowing for use with various samples. It is primarily used for sample preparation in spectroscopic analysis. 【Features】 - Ensures stable grinding results by maintaining the vibration plate in a perfectly horizontal rotation. - The agate and tungsten carbide grinding sets come with an automatic speed adjustment feature. - O-rings prevent sample loss. - Material selection helps prevent contamination. - Soundproof grinding chamber. - Quick action clamp allows for easy and safe setup of the grinding set. - Safety interlock included. - Ergonomically designed to reduce strain on the operator. *For more details, please refer to the PDF document or feel free to contact us.*

• Crusher
• Homogenizer

The "Mortar Grinder RM 200" is a laboratory grinding machine that allows for easy grinding of analytical samples, regardless of whether they are organic or inorganic. It mixes and grinds samples using pressure and grinding force. A scraper guides the sample between the pestle and mortar, continuously adjusting the entire sample as the mortar rotates. The pressure exerted by the pestle is adjusted using a spring at the top. Additionally, it can be used for mixing and homogenizing powders, suspensions, and pastes. It is an ideal machine for powdering homeopathic medicines and formulations. 【Features】 ■ Dry, wet, and freeze grinding ■ High reproducibility due to adjustable pestle and scraper ■ The housing with a window is sealed to prevent contamination ■ Pestle and mortar can be attached and detached without tools ■ Display to check load conditions ■ Adjustable pressure for pestle and scraper ■ Material selection prevents contamination ■ Three types of scrapers available (PU, beech wood, PTFE) ■ Pestle speed 100 rpm *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Grind Mix GM 300" is an ideal grinder for crushing and homogenizing food products. It can quickly and reproducibly grind samples of up to 4.5 liters. With its sharp and robust four blades and a powerful industrial motor, it can grind not only dry samples and soft or medium-hard samples but also samples containing high moisture or oil content perfectly. Additionally, it meets the advanced requirements of experimental analysis levels, providing excellent grinding results that cannot be achieved with standard household blenders. 【Features】 ■ Powerful 1.1 kW industrial motor with a maximum speed of 4,500 rpm ■ Achieves both preliminary grinding and fine grinding in one unit (standard mode with normal rotation, reverse mode for cutting with the blade tips, interval mode) ■ All parts in contact with the sample are autoclavable ■ Speed can be set in 100 rpm increments from 500 to 4,000 rpm to accommodate various samples ■ Efficient grinding with a gravity lid that adjusts to the volume of the sample ■ Up to 10 grinding conditions can be registered ■ Containers are available in polycarbonate and stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Grind Mix GM 200" is an ideal grinder for crushing and homogenizing food and feed. It can quickly and reproducibly grind samples of up to 0.7 liters. With its sharp and robust dual blades and powerful motor, it can ideally crush and mix not only dry samples, soft materials, and medium-hard samples, but also samples containing high moisture and oil content. With a variety of lids and sample containers, it allows for grinding suitable for each application and meets the advanced requirements of experimental analysis. 【Features】 ■ Powerful 1000W motor for homogenizing samples up to 700ml ■ Achieves preliminary grinding and fine grinding in one unit (standard mode, reverse mode, interval mode) ■ Newly equipped with a booster function of 14,000 rpm ■ Touchscreen interface ■ Grinding methods for each sample can be checked on the portal site ■ Uniform grinding of small samples or samples with high moisture content using gravity lids and reduction lids ■ Sample containers available in plastic, stainless steel, and glass ■ All parts in contact with samples are autoclave-compatible *For more details, please refer to the PDF document or feel free to contact us.

• Crusher
• Homogenizer

The "Cutting Mill SM 400 XL" can efficiently crush heterogeneous and tough samples such as waste and electronic circuit boards, thanks to its powerful 3 kW drive that generates high torque through a flywheel system. During the crushing process, there is no sudden increase in heat, allowing for the crushing of heat-sensitive samples without any issues. The screen size is large at 240 mm x 240 mm, enabling the crushing of more samples and reducing processing time. 【Features】 ■ Powerful crushing with a 3 kW drive ■ Efficient crushing ■ Capable of processing large samples up to 170 mm x 220 mm ■ The hopper can be tilted for easy cleaning, and the surface of the crushing chamber is smooth ■ Adjustable crushing particle size by changing the screen (1 mm - 20 mm) *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Cutting Mill SM 300" is a powerful cutting mill that can crush hard samples that other cutting mills cannot. With enhanced drive components featuring high torque performance from a 3kW motor utilizing RES technology, it efficiently crushes heterogeneous mixtures such as waste and electronic components. Depending on the sample, it can also reach the desired particle size for analysis. 【Features】 ■ Powerful crushing force with a 3kW motor that has high torque performance ■ The rotor speed can be continuously adjusted from 700 to 3,000 rpm, accommodating various samples ■ Efficient crushing with newly designed double-fixed blades ■ Easy cleaning with a rotor that can be removed without tools, a large open crushing chamber, and a surface finish that resists dirt ■ Easily determine the crushing particle size by selecting screens with hole sizes from 0.25 to 20 mm ■ A wide variety of hoppers, collection containers, rotors, and screens available ■ Maximum safety with motor brakes, interlock mechanisms, and a robust frame *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Cutting Mill SM 200" efficiently performs preliminary grinding of various samples with powerful crushing force and excellent operability. It is a universal standard model. With a powerful 2.2 kW motor drive and a rotor speed of 1,500 rpm (50 Hz) or 1,800 rpm (60 Hz), it can accommodate a wide range of applications. It also excels in cleanliness. By using the optional suction-type cyclone kit, lightweight samples and small quantities can be efficiently collected. A wide variety of accessories, including screens, hoppers, and sample collection containers, can meet various requirements. 【Features】 ■ Powerful crushing force with a 2.2 kW motor drive ■ Efficient grinding with newly designed double-fixed blades ■ Easy cleaning with a rotor that can be removed without tools, a large opening grinding chamber, and a surface finish that resists dirt ■ Easy determination of grinding particle size by selecting screens with hole sizes from 0.25 to 20 mm ■ A wide variety of hoppers, collection containers, rotors, and screens ■ Safety-focused design with engine brake, central locking mechanism, electronic safety features, and a sturdy frame *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Cutting Mill SM 100" is a basic model of experimental grinding machine that is cost-effective and easy to operate. With a powerful 1.5 kW motor drive and a rotor speed of 1,500 rpm (50Hz) (1,800 rpm for 60Hz), it is suitable for grinding the same sample. In addition to excellent cleanability, it can accommodate various requirements with a wide range of accessories such as screens, hoppers, and sample collection containers. It can be installed directly on a workbench or used on a dedicated stand. 【Features】 ■ Ideal for grinding the same sample ■ High-efficiency grinding ■ Excellent cleanability with smooth grinding chamber walls and a rotor that can be removed without tools ■ Easy determination of grinding particle size by selecting screens with hole sizes from 0.25 to 20 mm ■ A wide variety of hoppers, collection containers, rotors, and screens ■ Safety-conscious design *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Crossbeat Mill SK 300" is a grinding machine that can perform coarse to fine grinding of medium-hard and brittle samples by adjusting the screen and rotation speed. It is capable of batch or continuous grinding. The rotation speed can be adjusted between 2,000 rpm and 4,000 rpm, allowing for condition settings tailored to the sample. It can be used for sample preparation in laboratories, as well as for prototype production in pilot plants and production facilities. 【Features】 - High processing capacity suitable for batch use - Variable rotation speed: accommodates a variety of applications - Final particle size determined by selecting screen hole sizes from 0.12 to 10 mm - Fixed blades, rotor, and cassette can be removed and attached without tools - A wide range of applications supported by abundant accessories - Equipped with a motor brake - Central locking system - Cyclone kit (optional) to promote sample discharge within the grinding chamber *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Rotavita Mill SR 300" is a grinding machine capable of coarse to fine grinding of soft to medium-hard dried organic and inorganic materials, adjustable through screen and rotational speed settings. It can grind in batches or continuously. The rotational speed can be adjusted between 3,000 rpm and 10,000 rpm, allowing for condition settings tailored to the sample. It is suitable for sample preparation in laboratories as well as for prototype production in pilot plants and production facilities. All components, including the grinding chamber and hopper, are made of high-quality stainless steel. 【Features】 ■ High processing capacity suitable for batch use ■ Usable for pre-grinding to fine grinding ■ Variable rotational speed ■ Hold frame, rotor, and cassette can be detached without tools ■ Grinding with a 180° screen and grinder is ideal for hard and brittle samples ■ Distance rotor is suitable for heat-sensitive samples ■ Removable hopper for easy cleaning ■ Equipped with a motor brake ■ Grinding particle size is determined by screens with hole shapes ranging from 0.08 to 10 mm ■ Central locking system ■ A wide range of accessories available for various applications *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

The "Cyclone Mill Twister" is a sample preparation grinding machine for near-infrared analysis of food and feed. The ground sample is discharged into an integrated cyclone generated by a jet stream created by the impeller and is automatically collected in a wide-mouth bottle. Due to the jet stream generated inside the grinding chamber, the heat generated during grinding is extremely low, reducing moisture loss in the sample. Since the grinding particle size is determined by a screen, there is no need to adjust the analytical machine each time. The impeller speed can be adjusted in three stages, allowing for grinding tailored to the sample. Because the jet stream prevents the sample from lingering in the grinding chamber, cleaning is extremely easy. 【Features】 ■ Suitable for grinding feed, fodder, and grains ■ Impeller speed adjustable in three stages ■ Direct collection in a 250 mL wide-mouth bottle ■ Easy to clean ■ Convenient operation panel ■ Designed for long-term use with a 900W industrial motor *For more details, please refer to the PDF document or feel free to contact us.

• Crusher

- NEW: Up to 99 condition registrations - NEW: Quiet operating sound with optimized controls - NEW: Equipped with a USB interface compatible with the classification evaluation software EasySieve - Compatible with both dry and wet processes - Efficient sieving in a short time - Effective electromagnetic shaking - Three-dimensional classification with vertical, horizontal, and twisting effects, allowing the sample to evenly shake across the entire mesh surface. - By setting the acceleration "g" of the sieve bottom, classification results can be compared globally - Maximum sieve frame size: 620 mm (optional) - Time, amplitude, acceleration, and interval can be digitally set. - Intermittent operation possible - Optionally, the classification evaluation software EasySieve can be used. This allows for remote operation of the sieve shaker, evaluation of classification results, and documentation (in English/German). - Ideal for sample monitoring in compliance with ISO9001 and other international standards - Calibration possible; inspection certificate issuance - Easy to operate with an ergonomic design - Maintenance-free

• Separation device
• Analytical Equipment and Devices
• Sieve/Shaker

Advantages - NEW: Amplitude control via microprocessor - Compatible with both dry and wet methods (wet method is optional) - Efficient sieving in a short time - Effective electromagnetic agitation - Three-dimensional classification with vertical, horizontal, and twisting effects, allowing the sample to agitate evenly while transitioning across the entire mesh surface. - Maximum sieve height of 510mm - Digital setting of conditions (amplitude level, timer) - Basic model can be equipped with optional clamp unit type A. - Classification evaluation software EasySieve available - Maintenance-free - Easy to operate with an ergonomic design

• Separation device
• Analytical Equipment and Devices
• Sieve/Shaker

Advantages - NEW: Amplitude level and timer are digitally displayed - Compatible with both dry and wet methods (wet method is optional) - Efficient sieving in a short time - Effective electromagnetic shaking - Three-dimensional classification with vertical, horizontal, and twisting effects, allowing samples to uniformly shake across the entire mesh surface. - Maximum sieve height is 510mm - Digital settings for conditions (amplitude level, timer) - Basic model can be equipped with optional clamp unit type A - Classification evaluation software EasySieve available - Maintenance-free - Easy to operate with ergonomic design

• Separation device
• Analytical Equipment and Devices
• Sieve/Shaker

Metal 3D printers require proper evaluation and management of the shape and particle size distribution of metal powder materials to enhance their flowability and packing ability. Our company offers a "Quality Control Solution for Metal Powders" utilizing image analysis-based particle size distribution and shape measurement devices, as well as sieve shakers. 【Products and Applications】 ◎ Image analysis-based particle size distribution and shape measurement device "Camsizer X2" Measures tens of thousands to one million particles in just a few minutes. Can also evaluate the degree of powder agglomeration. ◎ Electromagnetic sieve shaker "AS200 Digit cA" Capable of evaluating particle size distribution and shape. Suitable for classifying metal powders for reuse. ◎ "GPC13/300B" retort furnace Removes moisture from metal powders and prevents oxidation. Also effective for stress relief in molded products. *For more details about the products, please download the catalog. You can also view technical documents explaining our image analysis technology.

• Other measurement, recording and measuring instruments
• Sieve/Shaker
• Other image-related equipment

It has efficient crushing power and a wide range of accessories, allowing for the adjustment of analytical samples in a short time while maintaining their characteristics. Advantages: - Powerful motor compatible with 200-240V - Instant crushing without damaging samples, achieving both preliminary and fine grinding with one machine - Rotor speed adjustable from 6000 to 18000 rpm - Patented cassette for maximum sample recovery rate and easy cleaning - All parts in contact with the sample can be removed and attached without tools - Final particle size determined by screen opening of 0.08 to 10 mm - Safety-conscious automatic locking grinding chamber cover - Design minimizes dust entry around the motor and electronic circuits - Interactive condition input via LCD screen and a single button - A wide range of applications supported by abundant accessories

• Crusher

Designed with a lower height (1M: excluding the hopper), this model is ideal for integration into sample station lines and can also be repurposed for continuous use. Its compact housing allows for replacement of existing equipment. The Jaw Crusher BB 600XL is also suitable for batch processing of small quantities. Advantages: - High processing capacity and high crushing efficiency - High crushing processing capacity of 3,500 kg/h - Adjustable gap width - Motor protection switch - Size of crushing jaws: height 600 mm / width 400 mm - Hopper with anti-rebound feature - Easy to clean - Continuous/batch crushing - Equipped with dust extraction module - Lubricating oil injection (optional) - There is also an online model that can be integrated into the sample station line.

• Crusher

The material of the crushing jaws is also available in a wide variety, allowing for contamination prevention measures. The BB 500 XL can be widely used from laboratories to factory analysis rooms due to its crushing power and safety. It is capable of both small batch crushing and continuous crushing of large samples. The crushing chamber designed with a steep gradient and powerful drive enables effective crushing. Advantages: - High crushing ratio of 50:1 - Continuous gap setting - Motor protection switch - Material selection prevents contamination. - Hopper with anti-rebound feature (removable hopper) - Easy to clean - Continuous/batch crushing - Equipped with dust extraction module - Lubrication oil injection (optional) - There is also an online model that can be integrated into the sample station line. - Specifications available for silicon crushing.

• Crusher

Various types of jaws, including those designed to prevent heavy metal contamination, are available, making them suitable for a wide range of applications from laboratories to factory analysis rooms due to their safety. In addition to batch processing for small quantities, they can also continuously crush large samples. The zero-point adjustment function for jaw gap width allows for compensation of jaw wear. The modular structure of the housing frame makes it suitable for a wide variety of samples. Advantages: - High processing capacity and high crushing efficiency - Front door can be opened for easy cleaning - Stepless adjustment function for gap width - Motor protection switch - Material selection prevents contamination - Hopper with anti-rebound structure - Sample receiver with safety device - Sample receiver with discharge pipe for continuous crushing - Dust collection module included

• Crusher

Various types of jaws, including those designed to prevent heavy metal contamination, are available, making them suitable for a wide range of applications from laboratories to factory analysis rooms due to their safety. In addition to batch processing for small-scale grinding, they can also continuously grind large quantities of samples. The zero-point adjustment function for jaw gap width allows for compensation of jaw wear. The modular structure of the housing frame makes it suitable for a wide variety of samples. Advantages: - High processing capacity and high grinding efficiency - Front door can be opened for easy cleaning - Stepless adjustment function for gap width - Motor protection switch - Material selection prevents contamination - Hopper with anti-rebound structure - Sample receiver with safety device - Sample receiver with discharge pipe for continuous grinding - Dust extraction module included

• Crusher
• Homogenizer

We offer various types of jaws, including those designed to prevent heavy metal contamination, which can be safely used in a wide range of environments from laboratories to factory analysis rooms. Advantages: - High processing capacity - Maintains high reproducibility with zero point adjustment function - Gap width can be continuously adjusted - Motor protection switch - Material selection prevents contamination - Hopper with anti-rebound structure - Safety-conscious design with interlock and motor brake - Easy to clean - Equipped with dust suction module - Standard equipped with lubrication oil injection kit - Online model that can be integrated into sample station lines is also available. - Specifications for silicon grinding are available.

• Crusher
• Homogenizer

We offer various types of jaws, including those designed to prevent heavy metal contamination, making them safe for use in a wide range of environments from laboratories to factory analysis rooms. Advantages: - High processing capacity - Maintains high reproducibility with zero point adjustment function - Gap width can be continuously adjusted - Motor protection switch - Material selection prevents contamination - Hopper with anti-rebound structure - Safety-conscious design with interlock and motor brake - Easy to clean - Continuous grinding capability - Equipped with dust suction module - Specifications available for silicon grinding.

• Crusher
• Homogenizer

We offer various types of jaws, including those designed to prevent heavy metal contamination, which can be safely used in a wide range of settings from laboratories to factory analysis rooms. Advantages: - High processing capacity - Contamination can be prevented by selecting materials - High reproducibility maintained with zero point adjustment function - Continuous gap setting - Motor protection switch - Hopper with anti-rebound structure - Safety-conscious design with interlock and motor brake - Easy to clean - Continuous grinding capability - Equipped with dust collection module

• Crusher
• Homogenizer

The compact body is designed to be dustproof, allowing it to be placed on a laboratory bench, and enabling easy and lossless coarse grinding of small samples. We also offer steel models designed to prevent heavy metal contamination. With digital gap width adjustment and zero point adjustment functions, it maintains high reproducibility. Advantages: - Powerful grinding with a 1.1kW motor drive - Compact body, benchtop model - Easy attachment and detachment of jaws for simple cleaning - Variable drive speed allows grinding suited to the sample - High reproducibility maintained with zero point adjustment function - Digital display of gap width and rotation speed - Gap width can be memorized - Material can be selected to prevent contamination - Large opening hopper

• Crusher
• Homogenizer

A tap-type electromagnetic sieve shaker has been released from Retsch. It combines a horizontal reciprocating motion of 280 times per minute with a tapping motion of 150 times per minute from above, making it easier for samples to pass through the sieve mesh. A dedicated soundproof case is also available to reduce noise.

• Separation device
• Analytical Equipment and Devices
• Sieve/Shaker

The vibration disc mill RS200 is a grinding machine that can quickly and efficiently grind medium-hard, hard, brittle, and fibrous samples to a particle size suitable for analysis, with high reproducibility and without loss. Grinding sets made of chrome steel, tungsten carbide, agate, and zirconia are also available, allowing for use with various samples. It is mainly used for sample preparation in spectroscopic analysis.

• Analytical Equipment and Devices
• Other laboratory equipment and containers
• Crusher

The Mortar Grinder RM200 allows for easy grinding of analytical samples, regardless of whether they are organic or inorganic. It can also be used for mixing and homogenizing powders, suspensions, and pastes. It is an ideal machine for powdering homeopathic medicines and formulations.

• Crusher
• Other laboratory equipment and containers

This is the comprehensive catalog of products handled by the German experimental powder equipment company, Leche.

• Crusher
• Analytical Equipment and Devices

The Lecce planetary ball mill is suitable for ultra-fine grinding. It can handle not only conventional mixing and grinding but also colloidal grinding and mechanical alloying.

• Mixer/agitator
• Crusher
• Analytical Equipment and Devices

The planetary ball mill can accommodate ultra-fine grinding. It is suitable not only for mixing and grinding for sample preparation but also for advanced applications such as colloidal grinding and mechanical alloying. The powerful combination of two centrifugal forces from rotation and revolution enables grinding in a short time. The PM200 is a benchtop model with two rotating platforms.

• Mixer/agitator
• Crusher
• Analytical Equipment and Devices

The planetary ball mill can accommodate ultra-fine grinding. It is suitable not only for mixing and grinding for sample preparation but also for advanced applications such as colloidal grinding and mechanical alloying. The powerful combination of two centrifugal forces from rotation and revolution enables grinding in a short time. The PM400 is a robust floor model with four rotating platforms.

• Mixer/agitator
• Crusher
• Analytical Equipment and Devices

It is a planetary ball mill that powerfully and quickly grinds down to the nanoscale.

• Mixer/agitator
• Crusher
• Analytical Equipment and Devices

The TG200 rapid sample dryer is used in many fields such as quality control, sample preparation, and research and development. It can dry samples without damaging them, regardless of whether they are organic, inorganic, chemical products, or pharmaceuticals. It can be widely used for coarse to fine materials, from crystalline substances to fibrous and leafy materials. With its powerful air blowing function, samples are dried while being mixed and stirred, allowing not only for sample preparation but also for drying test sieves. 【Features】 - Suitable for heat-sensitive samples as it dries while mixing/stirring. - Capable of drying in a short time (approximately 5 to 20 minutes). - Optional drying chamber and filter. - Easy operation with a functional clamp. - Maximum drying temperature of 150°C. - Digital condition settings. - Excellent mixing capability with an interval function. - Ability to register up to 9 conditions. - Long lifespan with a motor that does not use carbon brushes. - Compact body with CE mark certification for proven safety. 　■For more details, please refer to 'Sample Request' and 'Download'■

• Drying Equipment
• Analytical Equipment and Devices

The electromagnetic sample feeder DR100 enables uniform and continuous sample supply. With a beautiful design that harmonizes with other equipment, it can be attached not only to the grinders and classifiers from Verder Scientific (Lübeck) but also to electronic balances, mixers, stirrers, and particle size analyzers from other manufacturers. 【Features】 - Uniform supply - Significant labor savings - Continuously adjustable supply amount - Timer duration and flow level are digitally displayed - Compact design with an intuitive user interface - Easy one-touch setup of the funnel and chute without tools - Simple maintenance - Prevents overload when attached to a grinder - Interfaces with equipment from other manufacturers are also possible - Hopper capacity of 2.8L or 3.5L - Ideal for supplying small sample quantities at the experimental or testing level ■ For more details, please refer to 'Sample Request' or 'Download' ■

• Analytical Equipment and Devices

Effective cleaning that does not damage the mesh, extending the lifespan of test sieves! It is an ultrasonic cleaner. We offer three types of lineups tailored to the cleaning target. You can choose according to test sieves with an outer diameter of up to 203 mm, up to 400 mm, or up to 203 mm. (A type that can clean 5 pieces at once is also available.) 【Features】 - Fast and effective cleaning - Compact body - Easy operation - Usable for homogenizing suspensions and degassing solutions ■ For details, please refer to 'Sample Request' or 'Download' ■

• Other cleaning machines
• Ultrasonic Oscillator
• Ultrasonic Cleaner

For reliable fluorescence X-ray analysis, ensure the creation of solid sample pieces. By using the PP40 pellet press, you can create smooth and sturdy sample pieces from various materials such as slag, ore, minerals, and cement. Not only can the pressure be set between 50 and 400 kN, but the pressure during the pressing process, holding phase, and decompression process can also be individually adjusted. This means that internal stress within the sample can be reduced, allowing for the creation of perfect sample pieces that do not deform. 【Features】 - Pressing and decompression force adjustable between 50 and 400 kN - Interactive condition input function - Ability to register up to 32 conditions - Abundant accessories - Capable of handling hard samples - Tungsten carbide pressure plates - Easy and safe operation - CE mark confirming safety ■ For more details, please contact us or download from our website ■

• Analytical Equipment and Devices

The sample splitter can be used for sample division of most bulk materials. Since it does not require a power supply, it can be considered a splitter suitable for production sites. It is easy to operate and clean. 【Features】 - Usable in both analytical laboratories and production sites - Allows for easy and accurate sample division by hand - Simple and easy to clean - Sample division based on DIN 51701/Pt 4 - Affordable price - Six different models ■ For more details, please refer to 'Contact Us' or 'Download' ■

• centrifuge
• Analytical Equipment and Devices

This is a case of crushing metal "copper cutting powder" using a Lecce crusher. Sample: Copper cutting powder - Model used: Power Cutting Mill SM2000 - Parameter: 695 rpm - Accessory: 4mm screen ◆ For more details, please refer to "Contact Us" or "Download" ◆

• Analytical Equipment and Devices
• Crusher

This is a case of crushing metal "iron-foil" using a Lecce crusher. Sample: Fe-foil (Cu, Nb, Si, B) 5X17cm - Equipment used: Planetary Ball Mill PM100 - Parameters: 550rpm, 10 minutes - Accessories: Tungsten carbide jar 250ml + 12 balls with a diameter of 20mm ◆ For more details, please refer to 'Contact Us' or 'Download' ◆

• Analytical Equipment and Devices
• Crusher