CIS corporation Product Lineup

The 'VCC-5CXP7' series equipped with high-precision sensors made by SONY will be released! ● Equipped with a SONY 1/1.8 inch global shutter CMOS sensor ● Achieves a high frame rate of approximately 101fps (CXP6, 8-bit) → Suitable for analyzing and inspecting objects on high-speed manufacturing lines ● Compact and lightweight size of 29(W)×29(H)×55(D)mm / approximately 70g ● Data transmission, camera control, and power supply can be done with a single coaxial cable → Contributes to space and cost reduction in scenarios using multiple cameras It is equipped with necessary features for FA applications, such as external trigger, ROI function, and defective pixel correction. There is a lineup of monochrome and color models available.

• Color camera

We have added the new CoaXPress camera series 'VCC-5CXP4', equipped with the Sony Pregius IMX250 sensor, to our product lineup, which has been well received, featuring a 5-megapixel camera. This series supports a frame rate of 163.4 fps (CXP6, 8-bit, 2 lanes) and boasts the fastest image transmission speed among our 5-megapixel CoaXPress cameras. Additionally, it not only has a slim body measuring 55(W) × 55(H) × 30(D) mm, but also allows for data transmission, camera control, and power supply through a single coaxial cable, contributing to space and cost savings in environments where multiple cameras are required.

• Monochrome camera

This is a super high-speed Camera Link output camera with a resolution of 2M and a speed of 70fps, measuring 29mm on each side and weighing approximately 50g. It is well-suited for embedded applications that require compact size and high-speed output, such as various inspection purposes, robot vision, and various imaging device applications.

• Color camera

Introducing new CoaXPress cameras equipped with Sony's 4th generation global shutter CMOS sensor, available in 5 million, 20 million, and 24 million pixels! The 4th generation sensor (Pregius S sensor) incorporates a back-illuminated structure, allowing for smaller pixel sizes (2.74×2.74μm) and faster frame rates compared to the conventional Pregius sensor. When compared to cameras with pixel sizes larger than 2.74×2.74μm at the same sensor size, cameras equipped with the Pregius S sensor can capture the entire image of the subject with fewer exposures. Additionally, our 5 million pixel camera can achieve high-speed image transmission at 101 fps, the 20 million pixel camera at 79.6 fps, and the 24 million pixel camera at 21.9 fps. This makes them ideal for various inspection applications that require precise imaging in a short time. Furthermore, the CoaXPress interface allows for data transmission, camera control, and power supply through a single coaxial cable, contributing to space and cost savings even in applications using multiple cameras.

• Color camera

Equipped with a 4th generation global shutter CMOS sensor manufactured by SONY. Despite its compact size of 29(W) × 29(H) × 55(D) mm, it can output 5 million pixels at approximately 101 fps (8bit). It features various functions suitable for machine vision applications, such as external trigger, long-distance transmission, ROI, 2×2 binning, defective pixel correction, shading correction, gain, and gamma correction. Additionally, data transmission, camera control, and power supply can be achieved through a single coaxial cable, contributing to space-saving and cost-effective solutions in applications using multiple cameras.

• Monochrome camera

Equipped with a SONY 4th generation global shutter CMOS sensor. Despite its compact size of 29(W) × 29(H) × 55(D) mm, it can output 24 million pixels at approximately 21.9 fps (8bit). It includes various functions suitable for machine vision applications, such as external trigger, long-distance transmission, ROI, defective pixel correction, shading correction, gain, and gamma correction. Additionally, data transmission, camera control, and power supply can be achieved through a single coaxial cable, contributing to space-saving and cost-effective solutions even when using multiple cameras.

• Monochrome camera

The imaging method supports Quad 3G-SDI, 3G-SDI, and HD-SDI outputs, and is equipped with a variety of features including color correction, BT.2100 (HLG) compliant gamma curve, BT.709 and BT.2020, SQD and 2SI output methods, NR, LTC, and external synchronization! Additionally, this product adopts CIS's original image processing technology "Clairvu," achieving faithful color reproduction, and despite its compact size of 65(W)x66(D)x98(H)mm, it is capable of high-speed output up to 4K 60p. This product is a modular type, making it possible to integrate it into narrow spaces, allowing for flexible use according to customer needs.

• Color camera

【VCC-20CXP6 Series Features】 □ Equipped with SONY's 4th generation global shutter CMOS sensor Pregius S IMX531 □ Maximum cable length of approximately 20m □ Data transmission, camera control, and power supply can be achieved through a single coaxial cable, contributing to cost and space savings □ High-speed image transmission of approximately 80fps (CXP12×2 lanes, 8bit) □ M48 mount □ PoCXP compatible □ Housing size of 65(W)×65(H)×93.3(D)mm □ Equipped with functions necessary for machine vision applications

• Color camera

A new CoaXPress camera has arrived that can inspect previously invisible workpieces thanks to its detection wavelength range of 400nm to 1700nm! It can capture both visible and SWIR images with a single camera. **Benefits of Inspection in the SWIR Band** - Subjects that appear the same color under visible light can show different colors in the SWIR band due to differences in moisture permeability, allowing for differentiation of materials and contents. - Depending on the type of liquid, it can either absorb or transmit light, enabling the detection of the presence and quantity of contents, as well as the presence of foreign substances. - It can see through labels on PET bottles and plastic snack bags to confirm contents. - Leaf veins and bruises on fruits become more pronounced, making it effective for freshness checks and quality inspections. - When photographing people, sunglasses can also be penetrated, allowing for recognition of facial features. - It can capture clear images even in foggy or misty conditions. Leveraging these features, it is expected to be utilized in various applications such as wafer inspection, electronic circuit board inspection, food inspection, agricultural product inspection, pharmaceutical and tablet inspection, identification classification, process quality control, and security. Since the camera can detect from visible light to the SWIR band on its own, it enhances the visibility of workpieces and contributes to improved inspection efficiency.

• Monochrome camera

The ways in which customers want to see work vary greatly. Whether it's wanting to make work more visible and noticeable, measuring distances, or combining multiple image data into one, the introduction of an image processing system makes it possible to enhance visibility of what you want to see. However, finding a system that perfectly matches your company's needs can be quite challenging. At CIS, we not only manufacture and sell cameras but also have a system in place to support everything from software development and porting tailored to customer applications to providing and developing image processing software IP, accommodating both prototyping and mass production. We listen to our customers' needs, consider the necessity of optical systems, sensors, ISPs, and image processing units, and propose the system that we believe is best for them. Please leave system development to CIS!

• Color camera

Benefits of SONY's Pregius Sensor ■ Distortion-free images with global shutter In industrial applications, it is important to capture images accurately and without distortion when photographing workpieces moving quickly on factory production lines. ■ High speed and high performance Not only can distortion-free images be obtained with a global shutter, but the ROI (Region of Interest) function allows for cropping specified areas to increase the frame rate. Additionally, it is resistant to temperature changes and generates little noise, making it suitable for various needs both indoors and outdoors.

• Inspection robot

This product is a CoaXPress camera capable of capturing SWIR images. It enables high-precision inspection across a detection wavelength range of 400nm to 1700nm. By adopting the CoaXPress interface, it can capture both visible and SWIR images with a single sensor. It is expected to be utilized in various applications such as electronic circuit board inspection, food inspection, agricultural product inspection, pharmaceutical and tablet inspection, identification and classification, and process quality control. 【Features】 ■ Capable of capturing both visible and SWIR images with a single sensor ■ Adopts CoaXPress interface ■ Enables high-precision inspection across a detection wavelength range of 400nm to 1700nm ■ Equipped with the high-quality, low-noise "SenSWIR IMX990" ■ Achieves a compact size of 65x65x65mm and cost reduction *For more details, please refer to the PDF document or feel free to contact us.

• Monochrome camera

A new CoaXPress camera has arrived, capable of inspecting previously invisible workpieces with a detection wavelength range of 400nm to 1700nm! It can capture both visible and SWIR images with a single camera. **Benefits of Inspection in the SWIR Band** - Subjects that appear the same color under visible light can show different colors in the SWIR band due to varying moisture permeability, allowing for differentiation of materials and contents. - Depending on the type of liquid, light can be absorbed or transmitted, making it possible to determine the presence and quantity of contents as well as the presence of foreign substances. - Leaf veins and bruises on fruits become more pronounced, making it effective for freshness checks and quality inspections. Leveraging these features, the camera is expected to be utilized in various applications such as wafer inspection, electronic circuit board inspection, food inspection, agricultural product inspection, pharmaceutical and tablet inspection, identification classification, and process quality control. *For more details, please refer to the PDF document or contact our sales department.*

• Monochrome camera

**What is pixel shifting technology...** It is a technology that improves resolution by moving the X/Y axis between the pixel pitches of a camera's image sensor in sub-micrometer increments using a piezo actuator, capturing an image each time it is moved, and then synthesizing those images. With a 25M (25 million pixel) camera, it is possible to achieve a resolution equivalent to 100 million pixels with 4 shifts (2 shifts vertically and horizontally) and a resolution equivalent to 400 million pixels with 16 shifts (4 shifts vertically and horizontally). We have received inquiries from various customers requiring ultra-high precision imaging for inspection, research/analysis, medical, and archiving applications. For more details about our products, please download our product catalog or contact our sales department.

• Monochrome camera

The body is compact, measuring 29×29×55mm, making it suitable for integration into other machines. Additionally, with global trigger shutter operation, it enables high-speed image transfer at 239fps in CXP-6/8bit, allowing for clear capture of objects flowing on the line, such as PCBs, food and pharmaceuticals, and tiny components. Furthermore, taking advantage of its cable length and lightweight design, it is expected to be applied in creating VR/AR data by capturing subjects from 360° angles and synthesizing the data, as well as in robot vision and drone-mounted applications. Moreover, by incorporating features such as external trigger, long-distance transmission, ROI (only in the vertical direction), 2×2 binning (monochrome type only), defective pixel correction, and PoCXP, it enhances visibility of the desired parts of the objects, contributing to improved inspection efficiency. For detailed specifications, please contact our sales department.

• Color camera

The housing is compact, measuring 29mm in size, making it suitable for integration into other machines. Additionally, with global trigger shutter operation, it allows for image transfer at 85fps when using CXP-3 (8bit/10bit), enabling clear capture of objects flowing on the line, such as PCBs, food and pharmaceuticals, and tiny components. Its advantages of long cable length (up to about 100m with CXP1 and up to about 40m with CXP3) and being small and lightweight also make it promising for applications in robot vision and drone mounting. Furthermore, by incorporating features such as external trigger, long-distance transmission, ROI, subsampling, defective pixel correction, shading correction, and PoCXP, it enhances the visibility of the desired parts of the objects, contributing to improved inspection efficiency. For detailed specifications, please contact our sales department.

• Color camera

Equipped with a global shutter CMOS sensor, it features functions such as external trigger, ROI, defective pixel correction, sequence control, and shading correction, making it suitable for machine vision applications. Additionally, for customers who find it difficult to introduce expensive infrared cameras as production equipment necessary for high-sensitivity imaging in the near-infrared range, CIS also offers the VCC-5CXP3NIR (near-infrared model) equipped with a CMOS sensor that enhances sensitivity to near-infrared. This allows for imaging of areas that are difficult to confirm visually, leveraging the transparency of near-infrared wavelengths, and enables more precise imaging.

• Color camera

Equipped with a global shutter CMOS sensor, it features functions such as external trigger, ROI, defective pixel correction, sequence control, and shading correction, making it suitable for machine vision applications. There is also the VCC-SXCXP3RNON, which has replaced the IR cut filter of the VCC-SXCXP3R with cover glass. Please choose according to your application needs.

• Color camera

The body is compact with a size of 29mm square, yet it is capable of image transfer at 152fps (during 3-tap). Additionally, it supports global trigger shutter operation, allows for the selection of the target screen area through the ROI function to accelerate image output, and includes features such as defective pixel correction. It is suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign matter and appearance inspection, robot vision, and drone-mounted uses. The Camera Link interface, unlike traditional digital output cameras, has standardized connectors, pin assignments, and cables through collaboration between camera manufacturers and board manufacturers, making cable availability and handling easier. Currently, Camera Link is recognized as the most reliable and proven interface.

• Color camera

The body is compact at 29mm square size, yet capable of image transfer at 538fps (during 3tap). Additionally, it supports global trigger shutter operation, allows for the selection of the target screen area through the ROI function to speed up image output, and includes features such as defective pixel correction. It is suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign matter and appearance inspection, robot vision, and drone-mounted uses. The Camera Link interface, unlike traditional digital output cameras, has standardized connectors, pin assignments, and cables as part of the Camera Link specification, making cable availability and handling easier. Currently, Camera Link is the most trusted and proven interface in use.

• Color camera

The image processing algorithm ISP "Clairvu," developed independently by CIS, adjusts colors and brightness to create natural-looking images, achieving high quality that is well-regarded by professionals in the field. The CIS-made 4K and FULL HD cameras, designed with a compact size and robustness cultivated through industrial camera development, are equipped with SONY global shutter CMOS, enabling distortion-free imaging. By using these cameras along with fisheye lenses, it becomes possible to simplify the entire system, achieving space and cost savings while also enabling high-quality imaging. 【Entaniya Fisheye HAL 200/250】 - Designed for VR shooting, it has low peripheral compression, allowing for sharp rendering and straightforward stitching. - Specifications that minimize issues such as vignetting, aberration, and image flow. - With an ultra-wide angle of 250°, it enables one-shot VR without stitching lines. 【OPTART FJ SERIES】 - 185° fisheye lens compatible with 1/2” 2-megapixel megapixels. - Specifications that significantly improve resolution in both the center and periphery. - Well-suited for aerial photography and security fields where high precision is required.

• Color camera

With the diversification of product needs in the market, there is a demand for inspection equipment and devices to diversify specifications, improve productivity, and shorten delivery times, in order to achieve labor-saving, reduce manpower, enhance productivity, and increase quality value by reducing human errors. In addition to ensuring the accuracy of inspections, the miniaturization of IC products in recent years has led to higher resolution images being used for inspections, making the improvement of inspection speed and accuracy one of the challenges. CIS Corporation offers a wide range of industrial cameras that can meet diverse needs, supporting high resolution and high-speed capture. We can propose the most suitable products for various applications, including inspections in semiconductor manufacturing processes such as wafer, wire bonding, and packaging, as well as electronic circuit board appearance inspection (AOI), solder paste inspection (SPI), panel inspection, LED inspection, and electronic device inspection.

• Color camera

We would like to introduce our compact ToF camera development kit that utilizes "Time-of-Flight" technology, suitable for those who want to measure distances up to several meters without requiring the precision of light cutting while maintaining real-time capabilities! ▼What is a ToF camera?▼ A ToF camera measures distance based on the time it takes for light emitted from a specific light source to reflect off an object and reach the image sensor. It calculates the distance to the object pixel by pixel using an FPGA and outputs it in sync with a color image. Since the light source is located on the camera side, it can be used in indoor environments or warehouses where sufficient lighting is not available. Although the accuracy is lower compared to light cutting, it offers high real-time performance and achieves improved accuracy on curved surfaces with less parallax compared to stereo systems. It can be applied in various fields such as construction and logistics robots, AGVs, medical and caregiving settings, object recognition in dark environments, and hand gesture input. ■ Sample programs are available, including ROS drivers and point cloud processing. (Source: GitHub) ■ Seamless distance measurement from Near to Far (30cm to 5m) (Wide range mode) The mode switch also supports closer proximity (Super Near mode: 15cm to 70cm).

• Color camera

It is well known that near-infrared cameras are used in surveillance cameras, but their applications in industrial imaging and inspection are also increasing. To capture the near-infrared spectrum with high sensitivity, specialized infrared cameras are required, but they are very expensive and difficult to integrate into production facilities. Therefore, we would like to introduce a product lineup equipped with CMOS sensors that have improved sensitivity to near-infrared!

• Other inspection equipment and devices

The function that allows you to output only the necessary area from the images output by the camera is called ROI (Region Of Interest). By using the ROI function, it becomes possible to quickly read the necessary area, thereby increasing the achievable frame rate. This function is effectively utilized for 3D inspection using optical sectioning methods and inspections that require high-speed cycles. For customers considering 3D inspections or inspections that require fast processing, we will introduce the ROI function of our cameras and its application examples.

• Color camera

For customers who are facing the issues of 'when inspecting with one camera, the field of view is too small and cannot capture everything...' and 'in the case of parallel inspections using multiple cameras, there is not enough space...', CIS proposes the high-resolution camera series 'VCC-120CXP1', which achieves wide field of view and high resolution with a simple system configuration using just one camera, rather than parallel inspections with multiple cameras. This contributes to solving the challenges of customers in various industries and fields who are seeking wide field of view, high resolution, and space/cost efficiency.

• Color camera

Due to the discontinuation of CCD sensors and their peripheral components, it is expected that industrial cameras will rapidly adopt CMOS sensors in the future. While adopting CMOS sensors manufactured with cutting-edge processes can achieve performance that surpasses CCD sensors, there are concerns that changes in the optical size of the sensors will necessitate reselecting lenses. To avoid wasting the time spent on optical design, our company offers various proposals to help customers effectively utilize their assets, such as suggesting cameras with similar optical sizes or leveraging camera functions to maintain the optical size equivalent to that of CCD cameras.

• Color camera

The body measures 55×55×30mm, making it compact while capable of image transmission at a maximum speed of 65fps (CXP6, 8bit/10bit × 2 lanes). It uses a Sony Pregius sensor, achieving global shutter, low noise, minimal temperature rise, and low power consumption of 4.3W, making it suitable for factory automation applications. The camera is equipped with features such as external trigger, ROI, 2×2 binning, defective pixel correction, and shading correction, enhancing the visibility of objects and contributing to improved work efficiency in applications like board inspection, food and pharmaceutical inspection, dimensional inspection, and appearance inspection. Additionally, this camera can be used in a "multi-camera system" that allows connection and synchronization of up to 40 CXP cameras to a single PC. For example, if a PC is equipped with five 8-channel boards, it can support up to 40 cameras in a single lane or up to 20 cameras in two lanes, or a system can be created by freely combining high-resolution and low-resolution cameras according to the customer's needs. For more details about the camera or the multi-camera system, please contact our sales department or refer to the catalog available for download on this page.

• Monochrome camera

The VCC-25CXPHS series is a CoaXPress camera that supports shooting at 25 million pixels. Maintaining the features of conventional models such as compact size, high resolution, and long-distance transmission, it achieves a high frame rate of up to 150 fps (CXP-12, 8-bit), allowing for clear capture of fast-moving workpieces. It is well-suited for applications requiring long-distance transmission, such as appearance inspection of LCDs, substrates, and semiconductor wafers, as well as measurement, robot vision, drone mounting, and research and observation. The NIR (near-infrared) model is expected to be applied in inspection applications for detecting items that cannot be identified under visible light, such as bruises on fruit, capacity checks inside opaque containers, and facial recognition under sunglasses. 【Features】 - Supports 25 million pixels and high-speed output of up to 150 fps - Global shutter type, CMOS sensor - C-mount compatible with a sensor size of 1.1 inches - CXP-12×4, CXP-12×1 - Video output via DIN connector - Equipped with functions necessary for FA applications: external trigger, ROI, defective pixel correction, shading correction, binning (monochrome only), black level correction, gamma correction, etc. - Option to choose with or without heat sink

• Monochrome camera

We offer products suitable for customers in industries such as electronics, who conduct inspections of semiconductors and small electronic components. Our solutions ensure that even minute scratches and defects, which can only be detected with high-resolution cameras, are not overlooked, preventing the production of defective products. Additionally, our products can be utilized for archiving national treasures and artworks, as well as for digitization purposes. The interfaces we use include Camera Link, designed for industrial cameras, which offers exceptional reliability and stability, and CoaXPress, which enables high-speed image transmission with a simple system configuration. **Features of Camera Link I/F:** - Capable of transmitting data at 255 Mbps with one cable and 850 Mbps with two cables without delay. - When supporting PoCL, power can be supplied from the frame grabber to the camera via the Camera Link cable. - Connectors and cables are standardized, making them easy to obtain and handle. **Features of CoaXPress I/F:** - High data rates ranging from 6.25 Gbps to 25 Gbps. - Real-time trigger operation is possible. - Long-distance transmission of over 100 meters is achievable. - Highly flexible cables provide excellent usability. - High-precision imaging is possible in limited spaces. - Supports PoCXP.

• Color camera

Our company offers a diverse range of products in the "CoaXPress Camera Series," with resolutions ranging from 400,000 pixels to 120 million pixels. We also provide LED-compatible models and models equipped with our unique pixel shifting function. As a "multi-camera system," it can accommodate a variety of image processing applications. In the multi-camera system, by using an 8-channel CoaXPress standard board, you can connect up to 40 cameras to a single PC. This allows for connections of the same model cameras as well as combinations of low and high pixel cameras. It can be utilized for inspections using numerous cameras, as well as for VR and AR data production. Additionally, by increasing the number of boards and PCs, even more cameras can be connected, enabling three-dimensional imaging with cameras installed at various angles and capturing large subjects, thus promising a wide range of applications. Please feel free to search for a camera that suits your needs. We offer demo units for certain models, which you can use for consideration before purchase. ★ We are currently offering a document titled "The Basics of Multi-Camera Systems," which introduces various ways to utilize this system.

• Color camera

This system uses an 8-channel compatible CoaXPress standard board, allowing for a maximum of 8 cameras (1 lane) for VGA to 5M cameras, and up to 2 cameras (or 4 cameras) for 12 to 120M cameras (2 lanes/4 lanes). It also supports various combinations of low-resolution and high-resolution cameras, enabling diverse connections. Depending on the number of boards and PCs, even more cameras can be connected, making it suitable for image processing with numerous cameras, as well as for VR and AR data production. Cameras can be installed at various angles to capture three-dimensional images, and large subjects can be photographed all at once, expanding the range of applications. 【Features】 ■ Real-time trigger operation is possible ■ Long-distance transmission of over 100m is also acceptable ■ Highly flexible cables provide excellent usability ■ Excellent specifications for capturing high-precision images in limited spaces ■ Reduces costs by minimizing the number of boards and cables ★ We are currently offering a document titled "The Basics of Multi-Camera Systems," which introduces how to utilize this system and showcases the actual dynamic exhibition of a multi-camera system in 2018. Please refer to it along with the catalog.

• Color camera

By combining the Entaniya Fisheye HAL 200/250 series wide-angle fisheye lens manufactured by Entaniya with a compact 4K camera from CIS, it is possible to capture high-quality images with an ultra-wide angle of 200°/250° while maintaining a small system configuration. 【Entaniya Fisheye HAL 200/250】 - Designed for VR shooting, it has low peripheral compression, allowing for sharp rendering and straightforward stitching. - Specifications that minimize issues such as vignetting, aberration, and image flow. - The ultra-wide angle of 250° enables one-shot VR without stitching lines. Using a wide-angle fisheye lens allows for a reduction in the number of cameras needed, enabling high-quality imaging in a space-saving and cost-effective manner. Additionally, the VCC-4K2 is a 4K camera with a global shutter that captures images without distortion. By incorporating our proprietary ISP "Clairvu," it adjusts colors and brightness to achieve natural color tones in the footage. When actually attaching the lens and capturing landscapes, we were able to capture the nuances of cloud colors and sharp images of buildings. (Please check the shooting test details on Entaniya's website!)

• Color camera

The CIS Camera Link camera series has introduced new cameras with VGA and SXGA resolutions. Despite its compact size of 29mm square, the VCC-VCL5M can achieve high-speed image transfer at 578fps (3tap at VGA), while the VCC-SXCL5M can reach 136fps (3tap). Additionally, it features global trigger shutter operation, the ability to select the target screen area with ROI functionality, defect pixel correction, shading correction, one-push white balance, PoCL automatic switching, 1/2/3tap switching, 8bit/10bit/12bit output, cursor display, horizontal and vertical inversion, and pixel frequency switching (74.25MHz/64.969MHz/37.125MHz). These diverse features make it suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign matter and appearance inspection, robot vision, and drone-mounted applications.

• Color camera

VR (Virtual Reality) and AR (Augmented Reality) are expected to play an increasingly important role as communication tools in the future. However, producing content for these technologies requires multiple cameras. CIS proposes a multi-camera system that connects several CoaXPress compact cameras to a single frame grabber board. ★ Up to 40 cameras can be connected to one PC! (This is the maximum number of connections when using five 8-channel frame grabber boards.) ★ By using cameras that adopt CoaXPress for the interface, data transfer, camera control, and power supply can be achieved with one coaxial cable per camera, contributing to space and cost savings! ★ Achieving high pixel count and high frame rates With CoaXPress output, the fastest speed is 587 fps (VCC-VCXP5).

• Monochrome camera

This system uses an 8-channel compatible CoaXPress standard board, allowing for a maximum of 8 VGA to 5M cameras (1 lane), or up to 2 (or 4) 12 to 250M cameras (2 lanes/4 lanes), as well as a variety of combinations of low and high pixel cameras, among other connections. Depending on the number of boards and PCs, even more cameras can be connected, making it suitable for inspections using numerous cameras, as well as for VR and AR data production. It allows for cameras to be installed at various angles to capture three-dimensional images, and can also capture large subjects in a single shot, thus expanding the range of applications. 【Features】 ■ Real-time trigger operation is possible ■ Long-distance transmission of over 100m is also acceptable ■ Highly flexible cables provide excellent usability ■ Excellent specifications for capturing high-precision images in limited spaces ■ Reduces costs by minimizing the number of boards and cables ★ We are currently offering a document titled "The Basics of Multi-Camera Systems," which introduces ways to utilize this system. Please refer to it along with the catalog.

• Color camera
• Monochrome camera
• High Speed Camera

The body measures 55×55×25mm, making it compact, yet it is capable of image transmission at speeds of up to 114fps (VCC-5CL4) and 63fps (VCC-12CL4). Additionally, it features functions such as external trigger, defective pixel correction, and white balance, allowing for detailed adjustments in how the subject is captured. This specification is particularly suitable for customers looking to improve work efficiency by making objects easier to see, especially in applications like circuit board inspection, panel inspection, tiny component inspection, food and pharmaceutical inspection, dimensional inspection, and foreign matter and appearance inspection. Moreover, the VCC-5CL4 and VCC-12CL4 series utilize Sony Pregius sensors, achieving high sensitivity and low noise with small pixels of 3.45µm, enabling high-resolution and accurate imaging of fast-moving subjects with a global shutter.

• Color camera

Despite its compact size of 29mm square, the device is capable of image transfer at 523fps (CXP3, 8bit). Additionally, it features global trigger shutter operation, the ability to select target screen areas through ROI functionality, external trigger, defective pixel correction, and PoCXP, making it suitable for applications such as board inspection, AOI, PTP inspection, FPD inspection, inspection of tiny components, food and pharmaceutical inspection, dimensional inspection, foreign object and appearance inspection, robot vision, and drone-mounted applications.

• Color camera

■Compact and Lightweight Size VCC-VCXP5: CMOS sensor, size W29×H29×D29mm (approximately 50g) VCC-12CXP4: CMOS sensor, size W55×H55×D30mm (approximately 120g) ■CoaXPress Interface Video output via BNC connector. Capable of long-distance transmission. VCC-VCXP5: CXP3×1 lane VCC-12CXP4: CXP3-6×1 lane/2 lanes ■Achieving High Pixels and High Frame Rates VCC-VCXP5: 523fps (CXP3・8bit) VCC-12CXP4: 65fps (CXP6・8bit/10bit) ■Equipped with Functions Necessary for FA Applications Global trigger shutter operation is possible, ROI function allows selection of target image area, defective pixel correction, shading correction, etc. Available in Monochrome (M) and Color (R) models.

• Monochrome camera

VR (Virtual Reality) and AR (Augmented Reality) are expected to play an increasingly important role as communication tools in the future. However, capturing content for VR and AR requires multiple cameras. At CIS, we propose a 5-megapixel camera that achieves the fastest frame rate of 101 fps (8-bit) and enables synchronized shooting with multiple cameras by adopting the CoaXPress interface. ★ High pixel count, compact, and lightweight size CMOS sensor, dimensions W29×H29×D55mm. ★ Interface: CoaXPress (CXP 3・6×1 lane) Video output via BNC connector. Long-distance transmission is possible. (Compatible with CXP Ver1.1.1) ★ Achieving high pixel count and high-speed frame rate With CoaXPress output, the fastest is 101 fps (8-bit). ★ Equipped with features necessary for FA applications Global trigger shutter operation is possible, ROI function allows selection of the target image area, 2×2 binning (monochrome model only), defective pixel correction, shading correction, gain, gamma correction, etc. Available in monochrome (M) and color models (R).

• Monochrome camera

★ High pixel count, compact, and lightweight size CMOS sensor, size W29×H29×D55mm. ★ Interface: CoaxPress (CXP6 × 1 lane) Video output: BNC connector. Capable of long-distance transmission of up to approximately 100m. ★ Achieves high pixel count and high frame rate ★ Equipped with functions necessary for FA applications Global shutter, ROI function allows selection of target image area, 2×2 binning (monochrome model only), shading correction, defective pixel correction, gain, gamma correction, etc.

• Monochrome camera

The "VCC-120CXP1M (Monochrome) / R (Color)" is a high-performance compact camera featuring an ultra-high resolution of 120 million pixels. With a maximum frame rate of 9.4 fps, it is capable of capturing clear images even at high speeds. Its compact size makes it suitable for integration into inspection equipment and other applications. 【Main Specifications】 ■ APS-H type rolling shutter CMOS sensor ■ 2.2um x 2.2um cell size ■ Video output modes: CoaXPress CXP3/6×4 lanes, CXP6×2 lanes ■ Video output formats: Mono8/Mono10 ■ High-speed processing at 9.4 fps ■ Coaxial interface for data transmission and power supply ■ Low power consumption of 7W or less ■ Compact dimensions: 65mm(H) × 65mm(W) × 68mm(D) ■ Weight: approximately 300g *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Color camera

Introducing brightness guidelines expressed in lux through illustrations in the catalog! 'Product Features' 【VCC-HD1000A】 ■ Detects subjects in darkness at a minimum of F1.2 0.0005lux, which is invisible to the naked eye ■ Our proprietary ISP image processing technology 'Clairvu' expresses colors close to human vision ■ Suitable for surveillance, medical applications, and shooting in lighting-restricted environments 【VCC-HD4】 ■ Ultra-compact full HD camera measuring 29(H)×29(W)×77(D)mm, using a 1/2.8 type global shutter Sony CMOS sensor ■ Equipped with our proprietary ISP image processing technology 'Clairvu' ■ C-mount compatible ■ Suitable for surveillance, broadcasting, medical applications, E-Sports live streaming systems, and drone mounting 【VCC-4K2】 ■ Despite being a 4K camera, it has a compact and lightweight size of 65(H)×65(W)×110(D)mm and weighs 420g ■ Equipped with our proprietary ISP image processing technology 'Clairvu' ■ Ideal for medical, broadcasting, various shooting-related applications, ITS, and surveillance, focusing on compactness and high quality.

• Color camera

The "VCC-120CXP1M/R" is a high-performance compact camera featuring an ultra-high resolution of 120 million pixels. With a maximum frame rate of 9.4 fps, it is capable of capturing clear images even at high speeds. Its compact size allows for easy integration into inspection equipment and other applications. 【Main Specifications】 ■ APS-H type rolling shutter CMOS sensor ■ Video output modes: CoaXPress CXP-3, CXP-6 ■ Video output formats: Mono8/Mono10 (monochrome) 　　　　　　　　　　　: BayerRG8/BayerRG10 (color) ■ Dimensions: 65mm(H) × 65mm(W) × 68mm(D) ■ Weight: approximately 300g *For more details, please refer to the documentation (which includes a chart to help you find suitable products for your applications). Feel free to contact us for inquiries about demo units and more.

• Color camera

This device adopts the SONY Pregius sensor, just like our products "VCC-12CL4M/VCC-12CL4R," and is a 5.01 million pixel camera with the same dimensions (55×55×25mm). If you want to see high-quality images and also aim for efficiency with high-speed processing... we can meet those demands! Despite its compact body, it is capable of image transfer at a maximum speed of 114fps (in Deca mode). Additionally, it is equipped with features such as fixed trigger shutter mode, pulse width trigger shutter mode, defective pixel correction, and white balance, making it ideal for board inspection, panel inspection, tiny component inspection, food and pharmaceutical inspection, dimensional inspection, and general foreign matter and appearance inspection. Furthermore, for customers seeking even faster processing, CIS offers not only monochrome and color cameras from the VCC-5CL4 series but also the VCC-5CL4MHS (monochrome high-speed) and VCC-5CL4RHS (color high-speed) cameras with a maximum frame rate of 163.4fps. For detailed specifications of the high-speed cameras, please contact our sales department separately.

• Color camera