SANDO TECH, Inc. List of Products and Services

The hybrid cleaning machine (vibro washing machine) utilizes a special three-layer structure (patented) that performs intense vibrations and suction while keeping the liquid in the tank gentle. Its effect generates efficient and powerful cleaning (immersion) for the substrate. Additionally, when combined with microbubbles, it promotes the aggregation of dispersed contaminants and their separation, and the vibrations mechanically break the microbubbles, further enhancing the cleaning effect. "Hybrid" means cleaning through both vibration and suction. 【Features】 ■ The combined action of vibration and discharge/suction allows the cleaning water to reach deep into the workpiece, demonstrating high cleaning effectiveness. ■ The intense vibrations of the basket efficiently promote degassing, making it excellent as an immersion device. ■ A three-layer structure with a casing fixed between the basket and runner separates the vibration source from the transport medium, generating a greater vibration effect. ■ The compact washing tank requires only the minimum amount of water, reducing water consumption while providing excellent cleaning effectiveness, and it is also space-saving. *For more details, please refer to the PDF materials or feel free to contact us.

■ Belt-type Drying and Heat Treatment Machine By placing the substrate on a belt and using the belt to transport the substrate, heat treatment (drying) can be performed at low tension. It can accommodate a wide range of configurations, including bottom belts, upper and lower belt sandwiching, and suction combinations. Our testing machines allow for adjustable nozzle positions, enabling tests in desired arrangements such as opposing upper and lower nozzles or staggered upper and lower nozzles. ■ Floating-type Dryer Drying can be achieved without contact between the substrate and rolls, thanks to the airflow from the blower. This helps prevent unevenness on the coating surface. Options for vertical or horizontal configurations are available, and we can make proposals based on pass line and installation location constraints. ■ Heated Roll Dryer By transporting the substrate with heated rolls, drying and heat treatment of the substrate can be achieved. We can propose cylinder dryers with high efficiency and cost-effectiveness, as well as jacket rolls for annealing purposes, tailored to your specific needs.

This device can quickly and accurately connect the old substrate to the new substrate. The splice operation, which took about 7 seconds with conventional devices (butt joint), can be shortened to as little as 0.5 seconds with this device. As a result, the downtime during the splice operation is reduced, allowing for an accumulator-less splice using only the dancer roll. We have a coating and drying test machine, including the splice device, fully equipped in our clean room (Class 10,000), allowing customers to bring in their substrates for testing. 【Features】 ■ Patented ■ Splice operation shortened to a minimum of 0.5 seconds (joining takes a minimum of 1 second) ⇒ Production can be maximized with the old roll until the last moment, improving productivity ⇒ Allows for downsizing of the accumulator (switching to a dancer) * For more details, please refer to "Benefits of Speeding Up" ■ Both butt joint and overlap are possible ⇒ Butt joint is optimal for connecting laminated substrates ■ Enabled high-speed traverse (cutter operation) for excellent cutting performance ⇒ Can handle fragile substrates and thick materials.

Are you manually connecting new and old raw materials (especially butt splicing)? With our "Hybrid Splice Device," automation is possible. When the raw material connection work is automated... ■ The work can be completed easily (labor-saving) ■ Variability (errors) in the connection work is eliminated ■ Production lines do not need to be stopped (efficiency) It is possible to install new lines, as well as to add installations to existing lines. If there are space limitations, we will consider specifications that fit within those constraints. 【Features of the device】 ■ Patent obtained ■ Splice operation shortened to a minimum of 0.5 seconds (connection takes 1 second) 　⇒ Allows for maximum use of old unwinding raw materials, improving productivity 　⇒ Enables miniaturization of the accumulator (switching to a dancer) ■ Supports both butt splicing and overlapping ■ High-speed traverse (cutter operation) provides excellent cutting performance 　⇒ Can handle fragile substrates and thick materials In conjunction with the introduction of the splice device, we also propose modifications to unwinding (winding) devices and feed devices. Additionally, we will carry out modifications to electrical control panels, wiring work, and software adjustments.

Would you like to apply for various subsidies and grants, such as the Monozukuri Subsidy, to introduce a "splicing device"? We will also assist you with the subsidy application process. 【Features】 ■ Patent obtained ■ Splicing operation shortened to a minimum of 0.5 seconds (joining takes a minimum of 1 second) 　⇒ Enables miniaturization of the accumulator (switchable to dancer) ■ Supports both butt splicing and overlap splicing ■ High-speed traverse (cutter operation) allows for exceptional cutting performance 　⇒ Can accommodate fragile substrates and thick materials as well.

Our company has been involved in the manufacturing of many testing machines up to now. We manufacture testing devices and testing lines necessary to verify the specifications required for actual machines, supporting demonstration experiments and the production of actual machines. Occasionally, we have also engaged in projects that develop actual machines from the start without manufacturing testing machines. We wish to continue to be involved in development projects in the future. We will respond broadly, from small lab equipment to pilot lines that also serve production. 【Specialized Technologies】 ■ Continuous (roll-to-roll) devices ■ Devices using solvents (water) ■ Splice (raw material connection) devices * for continuous production and defect removal, etc. ■ Custom manufacturing 【Target Machines】 Demo machines, lab machines, pilot machines, testing machines, test machines, verification machines, demonstration machines, etc. 【Subsidies】 We will flexibly respond to cases utilizing subsidies from the prefecture or the national government, so please feel free to contact us.

We manufacture various types of coaters, adding features according to the base materials and intended uses. The coating methods include impregnation, gravure, and die, with base materials such as woven fabrics, non-woven fabrics (paper), and films, allowing for a wide range of customization to meet requests. *We have a coating drying test machine installed in our company, so coating drying tests can be conducted at any time. 【In-house Testing Equipment】 ■ Coating Dryer (in Clean Room) Conveying Speed: up to 50 m/min Base Material Width: 250–500 mm Raw Material Diameter: up to 500 mm Tension: 10–200 N Core: 3 inches, 6 inches Coating Methods: Direct Gravure, Reverse Gravure, Pattern Printing, Impregnation, Slot Die Drying Temperature: up to 150°C Drying Method: Roll Support + Floating Dryer (total 5.5 m)

"SANJET" is a gas fluff burning machine that can be used on various types of fabrics, including natural fibers such as cotton and synthetic fibers. It can utilize various heat sources such as natural gas, city gas, LPG, and butane gas, and the complete combustion flame uniformly and thoroughly removes fluff. Additionally, when the machine is stopped, the automatic burner reversal function prevents fabric damage. 【Features】 ■ The powerful high-temperature flame shortens the fluff burning time for processed fabrics. ■ It accommodates a wide range from low to high combustion. ■ Improvements to the burner body stabilize the flame in the width direction, allowing for uniform fluff burning. ■ In addition to nozzle improvements, the automation of air and gas ratio settings reduces gas consumption by approximately 7% compared to conventional methods. ■ Automation through a touch panel increases reproducibility regardless of the operator's experience. ■ It can accommodate various gas sources such as natural gas, city gas, LPG, and butane gas. ■ The separate combustion box has achieved a more compact design for the fluff burning chamber itself.

SANDO TECH develops, designs, manufactures, and sells custom-made Roll to Roll continuous processing machines. In dyeing and finishing machinery, we offer products such as the "SANJET" gas singeing machine and the "PERBLE RANGE" de-sizing, scouring, and bleaching machine. In film processing machinery, we provide splice machines and coating dryers, as well as hybrid cleaning machines in both fields. We will provide optimal proposals using technology that spans multiple fields. 【List by Application (Partial)】 ■ De-sizing, scouring, bleaching, mercerizing, dyeing ■ Film cleaning, film ink removal, coating drying, etc. *For more details, please refer to the PDF materials or feel free to contact us.

The "NEO-PERCLER" is a PVA recovery device that can selectively recover PVA, the main cause of COD in wastewater, and can almost completely remove it. It is very economical as the recovered PVA from dyeing processing plants can be reused in weaving factories. The operation is very simple, and it requires almost no maintenance. 【Features】 ■ Can recover over 90% of PVA ■ Can recover only PVA from wastewater containing starch, CMC, acrylic, and oil ■ Very easy to operate, with minimal maintenance required ■ Can use recovered PVA in combination with starch ■ Yarn made from recovered PVA is flexible and suitable for AIR JET LOOM *For more details, please refer to the PDF document or feel free to contact us.

We propose winding and unwinding devices according to your requirements. We accommodate various specifications such as single-axis, dual-axis, fixed-axis, and turret types. The substrates we can handle include various materials such as films, metal foils, textile fabrics, and non-woven fabrics (paper). We offer a wide range of solutions, from standalone winding (unwinding) devices to those that include splicing, dancers, accumulators, feeds, and complete line setups. We can also support replacements for existing lines (including those from other manufacturers) and can integrate electrical controls as needed. *For lines from other manufacturers, cooperation from the existing manufacturer will be required. We have a coating and drying test machine, including a splicing device, in our clean room (Class 10,000), allowing us to conduct transportation tests with your substrates brought in.

Our company has been manufacturing various devices that handle liquids, such as coating machines and cleaning machines, and we have also been producing filter devices. We offer custom solutions tailored to various liquids, such as water and solvents, as well as the size of foreign substances to be removed and the usage environment. By performing filtration, we can enable the recycling of liquids, which helps to reduce liquid consumption (energy saving and cost reduction). Examples of applications: Dyeing and finishing: Removing fluff from the water in washing machines Coating: Preventing foreign substances from contaminating solvents supplied to coating machines Peeling: Removing substances separated from solvents and water Pure water production: Filtering industrial water to produce pure water (RO water) In addition to filter devices, we can also provide proposals in conjunction with washing machines, cleaning machines, and coating machines, so please feel free to contact us.

This is a two-axis fixed-type unwinding (winding) device equipped with an auto splice function. While the two-axis turret type requires space for rotation, the two-axis fixed type can operate in a space-saving manner. The splicing method uses tape. The splicing methods for the unwinding device can be butt splicing or overlap splicing, and both options are available. The splicing time can be as short as 1 second, allowing for a smaller accumulator. We can propose not only new installations but also replacements for existing lines, so please consider us when contemplating converting an existing single-axis system to a two-axis system.

This is a device that performs the task of removing defects from paper (non-woven fabric) easily and with high quality. It meets the needs of reducing manual labor and ensuring seamless connections without failures. Operating Procedure: Preparation: Detect defect areas using a camera or similar device and stop the line. 1. Automatically cut the base material. 2. Manually set the defect area onto a dedicated winding device and automatically wind it. 3. Automatically cut the base material again and automatically apply adhesive to the tip of the base material using a dispenser. 4. Automatically overlay and attach the base material from step 1 onto the base material with adhesive applied.