アズサイエンス List of Products and Services

A&D Company, Limited's flat belt tire testing machine is a testing device equipped with accurate equipment control and precise force measurement. 〇Features - Accurate equipment control - Precise force measurement - Real vehicle driving simulation *For more details, please feel free to contact us.

A&D Company, Limited's vibrating moving belt is a device that simulates uneven road surfaces with a moving belt system, featuring vertical and steering direction vibration functions to recreate undulating road surfaces on a platform. 〇Features - Steel belt - Vertical vibration at 30Hz and steering vibration at 3Hz - Reproduces stable driving conditions at speeds over 200 km/h *For more details, please feel free to contact us.

A&D Company, Limited's belt-type suspension testing machine reproduces steering tests on flat roads on a platform, contributing to the development of driving stability and subtle ride comfort under various driving conditions. 〇Features - The moving belt unit is equipped with air bearings, which are well-regarded in wind tunnel testing machines and tire testing machines. - By incorporating a Wheel Force Sensor (WFS) into the rim, it measures the six forces acting on the tires and the road surface during steering conditions. *For more details, please feel free to contact us.

A&D Company, Limited's Dynamic Contact Force Testing Rig (DCFR) is a next-generation drum-type testing machine that can measure dynamic tire contact pressure distribution using an FMS (small three-axis force sensor) built into the drum. 〇Features - A large-radius φ3.2m steel drum - High-precision tire stand - Measures various forces generated between the tire and the road surface in an environment close to flat road conditions *For more details, please contact us.

A&D Company, Limited's tire rolling resistance testing machine is a force method tire rolling resistance tester that complies with ISO 28580 and JIS D 4234. 〇 Features - The force gauge guarantees values for Fz (applied force) and Fx (rolling resistance), specifically designed for rolling resistance measurement. - It achieves low temperature drift and high repeatability accuracy. - The tire testing chamber is covered with a chamber, allowing for quick air conditioning of the testing room. *For more details, please contact us.

A&D Company, Limited's tire static stiffness testing machine directly measures the ground reaction force of the tire by placing a plate-type four-component force sensor on the contact surface of the tire. This allows for accurate force measurement without being affected by the deflection of the mechanism or friction. 〇Features - Composed of a rigid testing frame and a servo motor-driven mechanism - Drive components: Z-axis pressurization mechanism, test table X/Y movement mechanism, twisting mechanism, and offset movement mechanism - Measurement of the ground twisting angle and torque by rotating the contact surface of the tire's center *For more details, please contact us.

A&D Company, Limited's EFM-3 series friction and wear testing device is a friction and wear testing apparatus for tribological evaluation tests that complies with JIS K 7218. 〇Features - Complies with JIS K 7218 - Compatible with test specimens such as rings, disks, and pins - Sliding speed range: 0.001 to 1000 cm/sec - Friction force measurement range: 0.02 to 10 N·m - Potential for system customization (addition of measurement and control items, etc.) *For more details, please download the PDF or feel free to contact us.

A&D Company, Limited's Lamborne Wear Testing Machine not only conducts wear resistance tests on vulcanized rubber specimens as specified in JIS K6264-2, but also allows for the observation of the slip rate characteristics of vulcanized rubber through highly accurate friction force and load measurements. 〇 Features - High-precision 2-minute force meter - Automatic specimen supply mechanism - Rolling resistance measurement *For more details, please contact us.

A&D Company, Limited's Impulse Tester is a testing machine that applies static and repeated pressure to the test specimen to evaluate the occurrence of leaks, degradation of function, and the presence of damage. 〇 Features - Excellent waveform reproduction - Stability for long-duration testing - Reproduction of various environmental conditions (temperature, pressure, vibration) - Responsive to customer needs *For more details, please contact us.

A&D Company, Limited's steering test machine applies repeated rotational loads to the test specimen (steering assembly) to evaluate its durability. 〇 Features - Control of the input drive side/load absorption side by a full digital controller allows for customizable test content as per customer requirements. - We can propose hydraulic servo or electric servo options based on your needs. - We will consider various specifications for performance tests, durability tests, and characteristic tests. *For more details, please contact us.

A&D Company, Limited's fatigue and durability testing machine for components can perform compression tests, tensile and compressive repeated tests, fatigue tests, and dynamic characteristic tests on material components, etc. 〇 Features - Ideal for compression and tensile fatigue durability testing with a gantry frame - The gantry frame allows for actuator mounting on either the lower or upper part depending on the test piece - The lower type is suitable for small test pieces, while the upper type is optimal for large test pieces *For more details, please contact us.

A&D Company, Limited's torsion testing machines include a torsion durability testing machine, a rotary torsion testing machine, a torsion fracture testing machine, and a torsion resonance testing machine. They are also capable of testing transmission torque and torsional fatigue for vehicle and ship power transmission shafts (propeller shafts) and motor shafts. 〇 Features - Apply any torsional moment to a round bar or cylindrical test piece and measure the test piece. - Capable of measuring strength and yield point against torsion, shear modulus, and torsion angle at fracture. - Measure the number of torsion cycles until fracture, as well as torsion torque values and torsion angles. *For more details, please contact us.

A&D Company, Limited's linear testing machine features a gantry frame and is ideal for compression and tensile fatigue durability testing. Depending on the test piece, the actuator can be mounted on either the lower or upper mold. 〇Features - The lower mold type is optimal for small test pieces, while the upper mold is suitable for large test pieces. - Testing machines can be manufactured with not only hydraulic actuators but also electric actuators. - Custom testing machines for users can be created using servo amplifiers and testing software. *For more details, please contact us.

A&D Company, Limited provides hydraulic power and oil supply to the SUM fatigue testing system. Additionally, it is equipped with cooling units and various safety devices. 〇Features - Excellent maintainability - The hydraulic power source for SUM is composed of standard parts - Maintenance and repairs can be carried out quickly and at low cost *For more details, please contact us.

A&D Company, Limited's hydraulic servo valve is an electric/hydraulic servo valve of the nozzle flapper type with a two-stage design. It supports high power and high speed, offering excellent control and responsiveness. 〇 Features - Suitable for high-response and high-precision hydraulic control systems. - Uses sapphire, which has hardness second only to diamond, for the tip ball group of the feedback pin. *For more details, please download the PDF or feel free to contact us.

A&D Company, Limited - Seat Belt Testing Machine From various tests to report creation, it can be executed seamlessly using dedicated software. 〇Features - Achieves excellent control and responsiveness with a digital controller. - Capable of updating and upgrading the control system. *For more details, please contact us.

A&D Company, Limited's Metal Detector AD-4976 series is a warm-up-free metal detector that supports multi-frequency and features external noise visualization. It allows for flexible installation tailored to the structure of the inspected items and the line. 〇 Features - Intuitive operation with an advanced touch panel - Quality assurance through operation restrictions and history functions at the administrator level - Operation and inspection history can be saved to USB - Multilingual support for better understanding by a wider audience - Robust and hygienic design with improved environmental durability - Easy maintenance with a tool-free attachment and detachment mechanism *For more details, please download the PDF or feel free to contact us.

A&D Company, Limited's metal detector AD-4971 series is an industrial belt conveyor type electromagnetic coaxial metal detector that can detect and eliminate metal foreign objects that pose a high risk to human health. 〇Features - 7-inch color touch panel - Image capture from USB memory - Maximum of 1,000 registered item types - Dustproof and waterproof, compliant with IP65 - HACCP compliant *For more details, please download the PDF or feel free to contact us.

A&D Company, Limited's large metal detector WCM72 series is a large type with a belt width ranging from 400mm to 1500mm. It can detect even large objects with high sensitivity. 〇Features - The height of the detected object passing through (effective passing height) can be customized to meet customer requirements. *For more details, please download the PDF or feel free to contact us.

Nihon Kasei Co., Ltd. Etak Division Temperature Cycle Tester (Air Chamber Type) WINTECH NEO is a temperature cycle tester equipped with the low GWP refrigerant R-448A (GWP value: 1387), featuring the high basic performance that WINTECH is committed to. ○ Features - Recovery performance achieved in the shortest time - Operating history download function - Standard equipped with room temperature exposure function - A 300℃ specification is also available, enhancing all basic performance for reliability evaluation of power devices *For more details, please refer to the PDF or feel free to contact us.

Nihon Chemical Co., Ltd. Etak Division High-Temperature Oven HISPEC H Type is a high-temperature oven suitable for a wide range of applications, including heat resistance testing and high-temperature lifespan testing of inorganic materials such as ceramics and various metals, as well as engineering plastics. ○ Features - High performance and high precision! - Safety-focused design - User-friendly controller * For more details, please refer to the PDF or feel free to contact us.

Nakamoto Kasei Co., Ltd. Etak Division Dew Cycle Tester DEW CYCLE reproduces the condensation conditions of electronic devices moving in environments with temperature and humidity differences, in a setting that is closer to reality. Its 2-way use allows for efficient operation. ○Features - Modes can be easily switched based on input conditions on the operation screen - User-friendly mechanism - Polymer sensor *For more details, please contact us.

Nakamoto Kasei Co., Ltd. Etak Division Pharmaceutical Stability Testing Equipment / Stability Testing Room LABONIC is a series developed based on years of cultivated temperature and humidity control technology, suitable for stability testing. It covers the temperature and humidity control range required for typical stability testing conditions. ○ Features - Non-frost design allows for continuous operation without interrupting tests - Secures a larger capacity relative to installation space, allowing for more samples to be stored - Standardly equipped with a capacitive polymer humidity sensor, eliminating the need for regular wick replacement *For more details, please contact us.

Nakamoto Kasei Co., Ltd. Etak Division Sample Moving Type Thermal Shock Tester Weiss Technik ShockEvent is an environmental testing device from Weiss Technik that complies with major testing standards in Europe and around the world. It is equipped with a variety of user-friendly features to create a comfortable testing environment. ○ Features - Large observation window with high visibility - Access port that minimizes load on measurement cables - Defrost-free function for over 1000 cycles - Adoption of the new refrigerant "R449A," which has a global warming potential (GWP) about one-third that of the conventional R-404A - Significant reduction in unnecessary power consumption by not heating or cooling tanks that are not in use for testing * For more details, please refer to the PDF or feel free to contact us.

Nihon Kasei Co., Ltd. Etak Division Rapid Temperature Change Tester weisstechnik ClimeEvent is the global standard for rapid temperature change testers. It can comfortably accommodate various testing standards. ○ Features - Fastest rapid temperature change of 25°C/min and maximum heating load of 8kW - Wide temperature and humidity range with good humidity tracking due to a unique humidification method - Original mechanism provides a more comfortable testing environment *For more details, please refer to the PDF or feel free to contact us.

Nihon Kasei Co., Ltd. Etak Division's Insulation Reliability Measurement System SIR13 is an insulation reliability measurement system capable of multi-channel insulation reliability measurement. ○ Features - Measures and judges at 20 msec intervals across all channels, allowing for the detection of not only time-dependent insulation degradation but also electrochemical migration without missing any. - Maximum applied voltage can be selected from 250V, 1kV, 1.5kV, 3kV, 6kV, or 10kV. - Number of channels ranges from 8 to 128 channels. - The power supply for voltage application is independent for each channel. *For more details, please refer to the PDF or feel free to contact us.

The Nakanishi Chemical Co., Ltd. conduction reliability measurement system MLR23 supports high-speed temperature cycling with the industry's fastest measurement capabilities. It is equipped with a scanner circuit, allowing for multi-channel conduction (junction) reliability measurements. ○Features - Two measurement modes: high-speed mode and high-precision mode - Supports both AC and DC measurement modes - Number of channels ranges from 32 to 288 *For more details, please contact us.

The Nankatsu Chemical Co., Ltd. Etak Division Multi-Event Detector (Momentary Disconnection Detection) ED71 can detect events (momentary disconnections) at the fastest interval of 50 nsec. Resistance measurement is also performed simultaneously with event (momentary disconnection) detection. ○ Features - Enables reliable measurement of conductive communication including multi-channel events (momentary disconnections) - Can be linked with vibration machines and drop testers - Easy operation and data management through a Windows application *For more details, please contact us.

Nihon Kasei Co., Ltd. Etak Division's capacitor lifespan evaluation system TLE60 is a system where the application and measurement circuits are independent for each channel. It is capable of conducting burn-in tests and lifespan evaluations for capacitors. ○ Features - Per-pin architecture - High current - The 250V type is equipped with a "stop function" for failure analysis *For more details, please contact us.

The MCL42 capacitor characteristic evaluation system from Nambon Kasei Co., Ltd. Etak Division uses the Keysight LCR meter E4980A as its core and measures the temperature and frequency characteristics of five key properties of up to 40 capacitors using a scanner unit. 1. Capacitance (C) 2. tanδ (D) 3. ESR 4. Impedance (Z) 5. Phase (θ) ○ Features - Automatically measures temperature and frequency characteristics using the HIFLEX-NEO series - Individual OPEN/SHORT corrections are possible for each channel, temperature, and frequency - LOAD corrections can be made for each channel and frequency *For more details, please contact us.

■Microcurrent Measurement - Enabled by a structure utilizing guard potential technology, capable of measuring microcurrents at the fA level. - Achieves low noise and high precision measurements. ■Easy Operation - External automatic control and manual operation via joystick (6 movement modes) are possible. * Both semi-automatic and manual operations are easy, contributing to improved measurement efficiency. ■Standard Compatibility with Major Measurement Instrument Manufacturers' Systems and Software - Keysight Technologies (B1500A Semiconductor Device Parameter Analyzer, EasyEXPERT) - Keithley Instruments (Systems and instruments equipped with ACS (measurement software)) * Custom support for other measurement instrument control and software is available. ■Diverse Options and Customization Support - Supports evaluation of temperature-dependent characteristics using a hot chuck (from +40°C to +200°C). - Allows for the installation of microcurrent probe cards using probe card adapters. - Customization is available according to the intended use.

【 Conforms to the latest version ISO 9227:2022 】 - A salt solution is uniformly sprayed in the test chamber to test the corrosion resistance (rust resistance) of metal materials and surface treatments. - We are quick to respond to the latest international standards.

The TM-type spray loss prevention spray tower uniformly sprays a salt solution into the test tank to accurately test the corrosion resistance (rust resistance) of metal materials and materials with surface treatments.

This system is a new tabletop washer that uses a horizontal dehydration method (centrifugal dehydration) to perform wash operations on small volume wells such as 384-well and 1536-well plates, particularly addressing the difficulty of liquid aspiration and discharge. In addition to the wash function, it is also possible to degas samples within the plates. It comes with a stacker that can hold 40 microplates, allowing for the selection of two types of wash solutions and switching between various washer modes. The plate centrifugal dehydration can be performed using a horizontal rotation method (patent pending), and the dehydration state can be set to any desired rotation speed, thereby resolving issues related to residual liquid and drying.

The in-circuit tester (ICT) is an inspection device that guarantees that the assembled circuit board is equivalent to a good product through electrical testing. HIOKI's in-circuit testers are designed to ensure that measurement results can be traced to national standards, providing highly reliable inspection results. Additionally, due to recent modularization and miniaturization of components, there are increasing cases that are difficult to detect through visual inspections, making multi-testing with in-circuit testers, which allow for safe operational testing and functional testing, a focus of attention. - Multi-channel, space-saving modular type - Cost-effective by integrating into existing automated systems - Ideal for shipping inspections and maintenance of burn-in boards due to high-speed multi-channel measurements.

Detect potential defects in high-density printed circuit boards without missing any. Achieve high-speed inspection using capacitance measurement methods. Compared to traditional resistance testing, inspection can be performed with the minimum number of steps, resulting in shorter inspection times. Furthermore, operability has significantly improved. Necessary information is consolidated on a single screen, making it easy to create inspection data through a graphical interface and workflow menu. Master data creation is automatically generated with the push of a button, reducing operation time and easing the burden on operators.

The DSC Caliris Classic is a robust device with an attractive price-performance ratio. Ease of use, compactness, robustness, accuracy, and optimization for everyday use - these are the features of the innovative DSC 300 Caliris Classic. The unique design of the DSC 300 encompasses everything needed for the success of DSC investigations, from beginners to experienced professionals. Above all, it features innovative software that sets a new standard. AutoEvaluation and IdentifyLab organize the collected data and track it for a smooth lab workflow. The DSC 300 Caliris Classic offers the following: ● Compact design that expands lab space ● Smart software that allows for quick initiation of DSC measurements ● Automated measurements and evaluations that simplify routine tasks ● Various cooling systems

The weather resistance test is a test that artificially creates natural environmental conditions such as light (ultraviolet and visible light), heat, condensation, humidity, and rainfall to accelerate the aging degradation of products. The "Super Accelerated Weather Resistance Test Machine - Metal Weather" is a test machine that uses a metal halide lamp system, allowing various conditions to be set according to the degradation factors of interest. It offers approximately 10 times the acceleration compared to sunshine or xenon, resulting in reduced testing time and lower running costs, making it economically advantageous and suitable for research and development as well as quality evaluation.

This is a device for measuring the peeling strength and shear strength of bonded materials. By moving the cutting edge at a speed of um/sec, it enables not only the measurement of physical properties such as shear strength but also groundbreaking observations of the state near the interface of dissimilar materials, analysis of dispersion states such as uniformity and non-uniformity through the observation of cutting surfaces in the depth direction of coatings and mixed materials, and tracking the degradation state from the surface layer to the inner surface after weather resistance testing.

This device, called SAICAS (pronounced "saikas"), which stands for Surface And Interfacial Cutting Analysis System, is used to measure the peeling strength and shear strength of substrates. In addition to the functions of SAICAS EN-W, this model is equipped with the capability to automatically produce specified thickness slices for wet analysis.

This is an ultra-precision model that consolidates the know-how cultivated by SAICAS over many years, enabling SAICA testing on ultra-thin films at the nanometer (sub-micron order) level by driving the cutting edge at a speed of nm/sec.

It is possible to evaluate the degradation of visible light suited to indoor LED lighting environments. This testing device can emit high-intensity visible light using white LED light sources. It has achieved an illumination environment over 10,000 times that of an indoor environment (approximately 500 lux).