マイクロサミット Product Lineup

The XC8115 / XC8116 is a multifunctional load switch IC that features ultra-low power consumption, space-saving design, and 105°C heat resistance, condensing the necessary functions for sequence control. It achieves a current consumption of 0uA both during operation and standby, making it ideal for applications such as compact battery-powered devices and energy harvesting equipment where minimizing power loss is crucial. Since it does not require input/output capacitors, it can operate as a standalone IC, contributing to space-saving on the circuit board. It incorporates a P-channel MOSFET and includes features such as thermal shutdown, short-circuit protection, and an adjustable soft start (inrush current prevention) function with external capacitance. Additionally, standby control via the EN terminal (with selectable Hi/Lo active) is also possible. The lineup includes two types: the "XC8115" with a CL discharge function for rapid discharging of output capacitors, and the "XC8116," which is equipped with a reverse current prevention function when turned off.

• Other electronic parts
• Dedicated IC

The "LPMS-CURS3" from LP-Research is a high-performance, compact inertial measurement unit (IMU) equipped with multiple communication interfaces. It is provided as a module board without a housing, making it ideal for direct integration into proprietary products and various devices. In addition to 3-axis gyroscope, accelerometer, and magnetometer sensors, it integrates temperature and pressure sensors into a single unit. It supports real-time calculations within the module and can output data at high speeds of up to 500Hz. All versions are compatible with USB, and the firmware allows for compatibility with either RS232, TTL serial, or CAN bus. It excels in precise motion measurement and position tracking of machines and individuals.

• Sensors

The LT9211C from Lontium Semiconductor is a video bridge chip that flexibly converts between different formats such as MIPI DSI/CSI-2, dual-port LVDS, and TTL (RGB). It supports high-resolution output of up to 4K@30Hz. In addition to simple video format conversion, it also integrates features such as "2-port MIPI/LVDS repeater functionality" with up to 12.5dB of input equalization and programmable pre-emphasis, as well as "switching" and "splitting" functions. By enabling signal attenuation correction and flexible signal distribution on a single chip, it significantly enhances the design freedom of circuit boards for products that incorporate cameras and displays.

• Other semiconductors

Interlink Electronics, a U.S. manufacturer specializing in sensors and HMIs, offers high-performance membrane keypads and graphic overlays following its acquisition of Calman Technology. By introducing digital printing technology, it achieves a high degree of design freedom that surpasses traditional silk screening while also incorporating environmentally friendly designs that eliminate solvents. The use of UV curing allows for surface textures and gloss finishes, enabling features such as glass-like clear window placements, emphasis on buttons and logos, and various functionalities like anti-glare, fingerprint resistance, and antibacterial properties. Furthermore, by consolidating and shielding switch circuits and LEDs on the membrane side, it significantly reduces the size of internal printed circuit boards (PCBs) while simultaneously preventing malfunctions caused by noise. From simple, compact non-tactile panels to large keyboards requiring complex assemblies, it provides custom interface assemblies tailored to customer needs.

• fiber

Malico's Uni-Holder is a groundbreaking BGA heat sink mounting solution that requires no mounting holes, anchor pads, or back plates on the circuit board. To meet the demand for "space-saving" in circuit board design, it adopts a unique structure that utilizes the slight gap (the height of the solder balls) between the PCB and the substrate for fixation. Springs incorporated at the four corners accommodate heat sinks of varying heights, protect components from vibrations during transport, and maintain stable thermal contact. Installation is completed in just a few seconds with a simple "click" without the need for tools, significantly reducing assembly costs. Rework is also easy, allowing for reuse more than 20 times. It offers the flexibility to be introduced immediately as an afterthought in cases where "thermal issues were discovered after design."

• Other electronic parts

Malico's brazed cold plate is a high-efficiency, high-reliability cooling solution designed for next-generation AMD and Intel platforms with a power consumption exceeding 500W. Its main feature is the "all-metal brazed structure" that does not use any O-rings or gaskets. This fundamentally eliminates the risk of liquid leakage, enabling maintenance-free operation even under extreme workloads. Additionally, it is fully compliant with standard specifications, allowing for "plug-and-play" integration into existing systems. This minimizes the hassle of design changes while dramatically improving system stability and thermal efficiency. Furthermore, in addition to the standard lineup, custom solutions tailored to special layouts and advanced performance requirements are also offered. We respond quickly from prototyping to certification, supporting our customers' diverse needs.

• Other electronic parts

This product is a package plan that integrates the communication functions of the next-generation Wi-Fi standard "IEEE802.11ah (Wi-Fi HaLow)", LTE connectivity, and remote management services into the multi-carrier compatible dual SIM LTE router "uM350R". It enables data collection in wide areas that traditional Wi-Fi could not reach, as well as in indoor environments with poor LTE signal reception and many obstructions, by leveraging the characteristics of 11ah (long-distance transmission and high penetration). Since it includes everything from device setup (kitting) to line arrangement and post-operation monitoring, it allows for a single point of contact, significantly reducing the workload for system deployment. Users can choose between a "6-month pack" or a "1-year pack" based on their usage period, and it is possible to continue using the service after the period ends with an "extension pack".

• Routers, Switches, and Hubs

The XC9711 series is a bootstrap synchronous rectification buck converter that supports a wide input voltage range from 4.5V to a maximum of 60V and incorporates Nch-Nch driver FETs. Key benefits: - Flexible mode selection: The MODE terminal allows for the choice between "PWM control," which prioritizes noise reduction, and "PWM/PFM automatic switching control," which offers high efficiency across the entire load range. - Design freedom for systems: Supports output voltage setting via external resistors and external adjustment of soft start time. Complex power sequences can be easily configured. - Capability to withstand harsh environments: Operates reliably in extreme conditions with a maximum ambient temperature of 125°C (Tjmax=150°C), making it suitable for industrial equipment and battery systems. - Comprehensive protection features: Equipped with multiple protection functions, including current limiting (with a characteristic curve), output overvoltage protection, Lx short-circuit protection, and thermal shutdown. - Long-term reliability: This product is part of the "Torex Long-Term Supply Program," making it ideal for devices that require long-term operation, such as industrial equipment.

• power supply

The XCL247/XCL248 series is a high-voltage, space-saving buck solution that integrates a control IC and coil into a single package (3.0mm × 3.0mm). Key benefits: - Simplified design: The integration of the coil significantly reduces the difficulty of PCB layout, minimizing noise and malfunctions caused by wiring. - Excellent customization: External resistor settings for output voltage and adjustments for soft-start time are possible, allowing flexible adaptation to various power lines. - Advanced management features: Equipped with a power-good function, making it easy to construct power sequences. - Long-term reliability: These products are part of the "Torex Long-Term Supply Program," making them ideal for devices that require long-term operation, such as industrial equipment.

• power supply

Taiwan's long-established manufacturer, G-Technology, offers a range of display modules that span from the latest self-emissive devices to industrial-grade high-reliability LCDs. The main OLED module features an ultra-thin structure of just 2mm thick without the need for a backlight, achieving an overwhelming contrast ratio of over 10,000:1. On the other hand, the TFT-LCD is available in a wide variety of sizes ranging from 1.44 inches to 11.0 inches. Furthermore, the company excels in IC mounting technology, which directly contributes to product miniaturization and thinness, accommodating a variety of processes such as flexible TAB, robust COB, and high-density packaging COG. We provide optimal display solutions tailored to our customers' product designs.

• LCD display

Metrodyne, established in Taiwan in 1997, has been developing and manufacturing pressure sensors utilizing advanced MEMS technology since 2002. As a specialized manufacturer, it provides high-quality products to markets around the world (medical, industrial, automotive, consumer).

• Sensors

A dual SIM router that supports multiple carriers (NTT Docomo, SoftBank, KDDI, Rakuten Communications) and regional BWA (band 41), providing stable communication. In addition to IEEE 802.11a/n/ac/g/n, it is equipped with the new wireless LAN standard IEEE 802.11ah (Wi-Fi HaLow), making it suitable for various applications.

• Routers, Switches, and Hubs

Various Antenna Products ■ 920MHz Band Certified Antennas 【Features】 A rich lineup of antennas certified for the 920MHz band. It caters to diverse needs, from compact models to waterproof (IP67) options. ■ Cellular LPWA Certified Antennas 【Features】 A range of antennas compatible with LTE and 5G (Sub-6). It supports a wide frequency range from 814MHz to 4900MHz, suitable for extensive cellular LPWA applications. ■ Wireless LAN Antennas (Wi-Fi 6/Wi-Fi 6E) 【Features】 Antennas compliant with the latest IEEE 802.11ax (Wi-Fi 6/Wi-Fi 6E) standards. Products are certified by Silex Technology and include types such as MHF4/SMA connectors. ■ Antennas That Resist Metal Interference 【Features】 The standout feature is its unique technology that minimizes performance differences when installed near metal, significantly enhancing installation flexibility.

• antenna

The E1002 is an ultra-compact camera module equipped with a 2.3-inch TFT-LCD and Wi-Fi functionality. It can be used cordlessly thanks to its built-in Li-ion battery (2470mAh) and supports video recording and live streaming in H.264 and MPEG formats. In addition to features for adjusting image quality such as white balance, contrast, and brightness, it also includes a 2x electronic zoom function. It is equipped with Wi-Fi functionality compliant with IEEE 802.11 b/g/n and has a built-in 2dBi PCB antenna.

• Color camera

The USB1201-M10BL2 is a USB 2.0 camera module equipped with an infrared LED and features a 1-megapixel monochrome CMOS image sensor with a global shutter function. It supports M12 mount, allowing for the selection of the optimal lens according to the application. It can output video at up to 50fps in MJPEG and YUV2 formats, and it is equipped with 12 infrared LEDs at 850nm, making it ideal for monitoring in dark environments.

• Monochrome camera

The USB2001 is a compact USB camera module developed by Mostek Co., Ltd. It is equipped with a 1/9 inch 1-megapixel CMOS image sensor and can output video in MJPEG format at a maximum resolution of 1280×720 pixels at 30fps. With a wide angle of 110° diagonally, it supports shooting distances of 10cm to 15cm. It can be powered and output via a USB 2.0 Type-C connector and operates within a wide temperature range of -20°C to 70°C.

• Color camera

ELD6501A is an APC driver integrated laser diode module that incorporates a laser chip with a wavelength of 650nm, a rated output of 5mW, a monitor diode, and an APC drive circuit into a TO-56 metal can package. Since it has all the APC circuits built-in, it can output APC-controlled laser light using only the laser light output setting resistor. The integration into the TO-56 package enables miniaturization and lightweight design of laser application devices, reduction of development time, and improved reliability due to metal can sealing. Furthermore, it can block external surges to the laser chip, enhancing electrostatic discharge resistance during assembly and transportation.

• Laser Components

The ELM185BB is a bipolar structure laser diode driver IC that incorporates an APC circuit consisting of a reference voltage source and an error amplifier. The built-in reference voltage source stabilizes the laser output against changes in power supply voltage and temperature. It can drive laser currents of up to 400mA and achieves minimal footprint implementation in a compact SOT-26 package. Additionally, it features protection functions such as an abnormal high-temperature cutoff circuit, a laser drive current limiting function for control loop failures, and a built-in Zener diode for surge absorption to prevent laser diode destruction. In addition to APC control, it also allows for open-loop constant current driving using the built-in constant current setting function.

• diode

Interlink Electronics' ElastaTrode is a groundbreaking technology that overcomes the challenges faced by traditional smart textiles, such as "expensive conductive threads," "high ink consumption in fabric printing," and "lack of flexibility in TPU printing." This innovative conductive material combines flexibility, lightweight properties, thinness, and high elasticity. It achieves low logistics costs and low prices while being highly breathable, comfortable to the touch, and applicable to seams. Furthermore, it is practical as it is also washable. ElastaTrode is offered as a custom product that brings customers' creative ideas to life, including electrodes, various sensors, heaters, and hybrid circuits, across a wide range of fields such as medical, automotive, and apparel, paving the way for the future of smart textiles.

• fiber

The SIM7672X series from SIMCom Wireless Solutions is a communication module that supports LTE Cat.1 bis as specified in 3GPP Release 13. It is expected to fill the gap between LTE Cat.1 and Cat-M/Cat-NB, supporting a maximum download speed of 10 Mbps and a maximum upload speed of 5 Mbps. It can operate with a single antenna and contributes to miniaturization (22% reduction in volume compared to conventional products) and cost reduction, including the communication module itself and peripheral circuits. It supports major bands in Japan and features a high-performance GNSS chip (with a lower-cost version available without GNSS), as well as low power consumption through eDRX functionality. It is anticipated to be used in a wide range of applications such as telematics, measurement and monitoring devices, industrial routers, and remote diagnostics.

• Communications

GigaDevice, headquartered in Beijing, China, has been growing since its establishment in 2004, focusing on flash memory and ARM microcontrollers as its main products. It boasts the second-largest market share in the world for serial NOR flash memory and has shipped a total of 2 billion ARM microcontrollers, making it a leading company with the number one market share in China's 32-bit microcontroller market. GigaDevice offers approximately 600 types of microcontrollers equipped with a wide range of ARM cores (M23, M3, M4, M33, M7), with particular attention on its simple and easy-to-handle 20-pin small pin MCU. It features five series and 21 types, including GD32E230/235 (M23), GD32F130 (M3), and GD32F310/330 (M4), available in two package types: TSSOP20 and LGA20. This provides optimal solutions for various compact applications.

• Microcomputer

【Product Lineup】 We offer the digital radio testers "RWC2010C" and "RWC2010M." These provide a testing environment for evaluating receivers of broadcasting technologies such as DAB, DAB+, DMB, DRM30, DRM+, AM, FM, and RDS. ■ RWC2010C: An integrated digital radio tester equipped with a display, keypad, and wheel dial. It also supports CDR (China Digital Radio Standard). ■ RWC2010M: A simple PC-controlled digital radio tester designed without a user interface. ■ Additional Module: We also offer the power amplifier module "RWC9500B" to enhance the output of the digital radio testers RWC2010C/M.

• Signal Generator

We would like to introduce Acconeer's "Millimeter Wave Pulse Coherent Radar Sensor." Using a 60GHz millimeter wave radar, it achieves high-precision detection of distance, position, movement, and material identification. Additionally, all circuits and antennas required for radar transmission and reception are integrated into a compact package, eliminating the need for antenna design and the necessity for an opening for the antenna in the device, which is also an advantage. 【Features】 ■ Uses 60GHz millimeter wave radar ■ Capable of recognizing the movement of multiple objects and gestures ■ Supports continuous and single sweep modes ■ No need for an opening for the sensor in enclosures such as plastic (transmits through plastic and glass) *For more details, please refer to the related links or feel free to contact us.

• Sensors
• Other electronic measuring instruments
• Other measurement and measuring equipment

Zentel Japan was established in 2003 by the Powerchip Group and became independent in 2019, inheriting the Zentel brand. It continuously provides sophisticated memory products to customers in the PC, consumer, telecommunications, industrial, and automotive sectors. The A3T4GF30CBF(x8)/A3T4GF40CBF(x16) is an ECC-integrated DDR3 4Gb product. This product is the optimal solution that meets the functional safety requirements defined by ISO/IEC for system designs that require high reliability. ECC-integrated DDR directly notifies the SoC of faults that cannot be corrected by ECC, thereby reducing the system failure rate. Additionally, traditional systems face challenges in cost reduction because fault determination is performed by the SoC, requiring separate DDR for ECC in addition to the DDR for working memory. However, ECC-integrated DDR reduces the number of components and efficiently suppresses parts and implementation costs, power consumption, and EMI.

• Memory

UNICTRON's optical switches and optical sensors feature a rich lineup and custom design options, offered at competitive prices. These products have a strong track record of adoption by major companies worldwide and can be manufactured outside of China and Taiwan as well. They provide high-quality products tailored to diverse market demands.

• Other optical parts

We offer wireless network solution products. We provide communication systems, communication modules, LPWA modules, antennas, measuring instruments, and more to realize IoT. In passive components, we handle SAW devices, crystal oscillators, and oscillators, and in measuring instruments, we offer LoRa testers and DAB/DRM testers. Please feel free to contact us. 【Product Lineup】 ■ Systems ■ Modules, Semiconductors ■ Passive Components ■ Antennas ■ Measuring Instruments *For more details, please download the PDF or feel free to contact us.

• High frequency/microwave parts