データコントロルズ List of Products and Services

The MCS-2160 modular media converter chassis enables a variety of applications such as FTTX, CWDM, and Carrier Ethernet. By using different XC module cards that support speeds of up to 10Gbps, it is possible to build an ideal network topology. It provides easy access to the management interface, allows for checking system status and counters, and offers firmware upgrades, FPGA updates, and network statistics.

The IGMC-102GP is an industrial optical media converter equipped with two SFP ports. Rate settings for each port can be configured via DIP switches (100Mbps/1000Mbps). With LFP functionality and a wide operating temperature range from -40°C to 75°C, it can be used safely and securely in any temperature environment.

The FRM220-10GC-TS is an optical media converter from 10G BaseT to 10G Base-R (SFP+). By using it with the FRM220-NMC, management via SNMP and WEB-GUI becomes possible. The FRM220-10GC-TS provides a simple and optimal 10G Ethernet solution.

◆IEC61850-3 and EN50155 compliant optical media converter ◆With LFP function ◆IP30 enclosure ◆1×10/100Base-T(X) M12 connector ◆For substation and railway network applications

◆ Wide operating temperature range (-40℃ to 70℃) ◆ 1×10/100Base-TX auto-sensing/auto MDI/MDI-X ◆ Ethernet to fiber optic ◆ LFP (Link Fault Pass-through) function ◆ Full duplex/Half duplex ◆ Store and forward ◆ Easy configuration via DIP switch ◆ Reliable and robust IP-30 enclosure ◆ DIN rail and panel mountable ◆ RoHS compliant ◆ IEEE 802.3at PoE PSE compliant (only for IPMC)

◆ Wide operating temperature range (-40℃ to 75℃) ◆ 1×10/100/1000Base-T auto-sensing/auto MDI/MDI-X (only for 111GP series) ◆ 1×100/1000Base-T auto-sensing/auto MDI/MDI-X (only for 111GPB) ◆ 100/1000Base-X SFP port ◆ Ethernet to fiber optic ◆ LFP (Link Fault Pass-through) function (only for 111GP series) ◆ Full duplex/Half duplex ◆ Jumbo frame 9Kbytes (only for 111GP series) ◆ Easy configuration via DIP switch ◆ Reliable and robust IP-30 enclosure ◆ DIN rail and panel mountable ◆ RoHS compliant ◆ Compliant with IEEE802.3at PoE standard (only for IGPMC-111GP)

The FRM220-1000EAS/X-1 is a gigabit media converter that converts 10/100/1000Base-T to 100/1000Base-X SFP and complies with IEEE802.3ah OAM standards. Network administrators can monitor, configure, and control each IEEE802.3ah series card and remotely connected OAM-compliant converters using standalone chassis or modular chassis that support SNMP and web management features. This gigabit converter also supports layer 2 switching technologies such as bandwidth control, speed settings, VLAN tagging, Q-in-Q, QoS, spanning tree, automatic laser shutdown, link fault pass-through, OAM loopback, and Dying Gasp.

Operating temperature range: -40℃ to +75℃ 10/100Base-TX to 100FX (SFP module) converter Since it can be used with both AC and DC power types, it can be utilized in various situations. Additionally, it comes standard with DIN rail and wall mount options, allowing for diverse installations. -*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*- 【Demo units are available for loan】 ● I want to see the actual product before purchasing. ● I want to test it to see if it can be used before buying. In response to customer requests, we have started a loan service for verification equipment. Please contact us if you are interested. -*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*--*-*-*-*-*-*-*-

The FMC-1800 is a media converter rack with management functions for 18 channels, capable of converting between 10/100/1000Base-T Ethernet and 100/1000Base-X (SFP) optical connections. The FMC-1800 can also connect to various Ethernet switches with RJ45 interfaces. SFP modules can be selected from a wide range, including 2-core multimode and single-mode modules, as well as modules that support single-core bidirectional communication, with communication speeds ranging from 100 to 1000 Mbps. It supports SNMP and web-based management functions, allowing for remote monitoring, configuration, and control of the FMC-1800.

◆1×1G/10G Base-T, 1×1G/10G Base-X (SFP) ◆Supports jumbo frames (up to 10Kbyte) ◆IP30 enclosure ◆DIN rail and wall mountable ◆Wide temperature range (-20℃ to 60℃)

The FRM220-FXO/FXS is a fiber converter that uses the Plain Old Telephone System (POTS). In FXO mode, it connects to a telephone line (PSTN) or PBX line and functions as a telephone by detecting ringing signals. Additionally, in FXS mode, it functions as a PSTN and can be connected to a telephone. When housed in a chassis with SNMP management, it allows for in-band management, enabling the display and configuration changes of the status of local/remote converters. Manual settings via DIP switches are also possible.

▪ Fast Ethernet or Gigabit Ethernet media converter/repeater transparent ▪ Maximum communication speed of 1Gbps ▪ SNMP/TELNET management with FRM220 chassis accommodation ▪ Transmission distance of 2km to a maximum of 120km (depending on SFP module) ▪ Optical repeater function (Re-amplification & Reshaping) ▪ DDM (Digital Diagnostic Monitoring) support for SFP modules ▪ Link Fault Pass Through (LFP function) support ▪ Auto Laser Shutdown (ALS) function support

The FRM220A-1000EAS/X is a gigabit Ethernet converter that complies with the IEEE 802.3ah OAM standard, featuring 2×TP ports and 2×SFP ports, and converts between 10/100/1000Base-T and 100/1000Base-X (SFP). It supports SNMP and WEB management functions, allowing network administrators to monitor, configure, and control card modules of media converters compliant with IEEE 802.3ah and OAM-compliant converters connected remotely. This gigabit converter also supports layer 2 switch technologies such as bandwidth control, speed settings, VLAN tagging, Q-in-Q, QoS, spanning tree, automatic laser shutdown, link fault passthrough, OAM loopback, and Dying Gasp. This card can be managed and monitored through a chassis with an NMC management card.

◆ Wide operating temperature range (-40℃ to 75℃) ◆ 1×10/100Base-TX auto-sensing/auto MDI/MDI-X ◆ Ethernet to fiber optic ◆ LFP (Link Fault Pass-through) feature ◆ Full duplex/Half duplex ◆ Store and forward ◆ Easy setup with DIP switches ◆ Reliable and robust IP-30 enclosure ◆ DIN rail and panel mountable ◆ RoHS compliant ◆ IEEE 802.3at compliant

The IGMC-1011GF/GP is a gigabit optical media converter for industrial networks, equipped with 1×10/100/1000Base-T and 1000Base-X. It supports a wide temperature range of -40℃ to 70℃, making it suitable for almost any operating environment. Due to its simple design that requires no configuration, it can be easily integrated into nearly all network applications. It supports jumbo frames (9k), making it one of the optimal choices for industrial network applications.

◆Wide operating temperature range (-40℃ to 70℃) ◆2×10/100Base-TX, 1×100Base-FX media converter ◆DIN rail and panel mountable ◆Dual DC power input support (12~48 VDC) ◆Compact design of 26.1 (W) x 70 (D) x 95 (H) mm

The FRM220 series is a multi-service chassis platform that provides reliable solutions for high-density media converter modules in applications such as telecommunications, enterprise, long-distance transmission, and factory automation. The power modules, fans, management modules, and interface cards for the FRM220-CH20 and FRM220-CH08 chassis are all hot-swappable, allowing for replacement without interrupting communication. The FRM220-CH04A is a fixed-type chassis with built-in AC and DC power. Available power options include built-in AC, DC power, or redundant power configurations of AC + DC, AC + AC, and DC + DC. The FRM220 series is offered in three types of chassis: 2U 20 slots (FRM220-CH20), 1U 8 slots (FRM220-CH08), and 1U 4 slots (FRM220-CH04A).