データコントロルズ List of Products and Services

◆ 10GBase-T and 10GBase-R (SFP+) media converter ◆ Built-in frame counter, counts frame size/CRC errors/unicast, multicast, broadcast ◆ Supports digital diagnostic monitoring for SFP+ (DDM) ◆ Equipped with an out-of-band IP/SNMP management port on the back and a pin-type console port on the front ◆ 10G link aggregation function (LLF) ◆ Built-in TELNET/WEB browser management

◆ 10GBase-R (SFP+) and 10GBase-R (SFP+) media converter ◆ Built-in frame counter, counts frame size/CRC errors/unicast, multicast, broadcast ◆ Supports digital diagnostic monitoring for SFP+ (DDM) ◆ 3R repeater function (Re-Amplification: amplitude amplification / Re-Shaping: waveform shaping / Re-Timing: timing regeneration) ◆ Supports all frame sizes including jumbo frames ◆ Equipped with an out-of-band IP/SNMP management port on the back and a pin-type console port on the front ◆ 10G link aggregation function (LLF) ◆ Built-in TELNET/WEB browser management

The MCS-2160 modular media converter chassis enables a variety of applications such as FTTX, CWDM, and Carrier Ethernet. By using different XC module cards that support speeds of up to 10Gbps, it is possible to build an ideal network topology. It provides easy access to the management interface, allows for checking system status and counters, and offers firmware upgrades, FPGA updates, and network statistics.

◆1×1G/10G Base-T, 1×1G/10G Base-X (SFP) ◆Supports jumbo frames (up to 10Kbyte) ◆IP30 enclosure ◆DIN rail and wall mountable ◆Wide temperature range (-20℃ to 60℃)

The FRM220-40G-1Q4S is a 40G QSFP to 4x 10G SFP+ transponder that enables media conversion and extends transmission distances for 10G links over 40G. The FRM220-40G-1Q4S has been developed to meet the demands of data centers and enterprises that require high bandwidth. With the emergence of high-end servers and Ethernet switches equipped with 40G Ethernet interfaces, there is a need for media conversion (from multimode to single mode) and expansion of link range. The FRM220-40G-1Q4S is a hot-swappable card module with two slots, featuring one QSFP+ port and four SFP+ 1G transceiver ports. Installation is very simple and can be done using a plug-and-play method. The FRM220-40G-1Q4S is ideal for applications requiring QSFP+ or SFP+ when used with the FRM220-CH20 chassis.

OTN61002 is a 10G OTN repeater that supports 2-channel multi-service. It can operate as a remote terminal in point-to-point applications or applications using the DCWDM2108H series. FEC functionality is applied for each channel, achieving excellent communication performance with an average coding gain of 10%. 【Features】 ◆ 2-channel transponder card ◆ Compliant with ITU G.709 and G.975 I.4 ◆ Supports GFEC or EFEC functionality ◆ In-band management features (remote configuration and performance monitoring) ◆ Can be used as a remote standalone device without a local management card ◆ Dying GASP functionality ◆ Planned in-band monitoring/management support via management card* *For more details about the product, please contact us directly.

The FRM220-10GC-TS is an optical media converter from 10G BaseT to 10G Base-R (SFP+). By using it with the FRM220-NMC, management via SNMP and WEB-GUI becomes possible. The FRM220-10GC-TS provides a simple and optimal 10G Ethernet solution.

The FRM220 series is a multi-service chassis platform that provides reliable solutions for high-density media converter modules in applications such as telecommunications, enterprise, long-distance transmission, and factory automation. The power modules, fans, management modules, and interface cards for the FRM220-CH20 and FRM220-CH08 chassis are all hot-swappable, allowing for replacement without interrupting communication. The FRM220-CH04A is a fixed-type chassis with built-in AC and DC power. Available power options include built-in AC, DC power, or redundant power configurations of AC + DC, AC + AC, and DC + DC. The FRM220 series is offered in three types of chassis: 2U 20 slots (FRM220-CH20), 1U 8 slots (FRM220-CH08), and 1U 4 slots (FRM220-CH04A).

The FRM220-10G-3R has four SFP+ slots that can be used as a dual-channel 10G 3R multi-rate transponder or as a protection feature for 1-to-2 port line switching. This device supports various protocols including 1G/10G Ethernet, SDH STM16/STM64, OTU1/OTU1e/OTU2/OTU2e, Fibre Channel 1/2/4/8/10/16, ODU, OBSAI, and CPRI, providing flexible transmission. By using dedicated CWDM or DWDM wavelength SFP+, the 16G transponder supports multi-rate functionality with optical communication speeds ranging from 1Gbps to a maximum of 10Gbps. This capability makes the FRM220-16G-3R transponder suitable as a repeater for transmission over extended distances. Recent improvements in component performance have significantly enhanced power conditions and heat dissipation compared to previous transponders.

The MMC-10GFT series is a compact design optical media converter that supports 10Gbps. The features of this media converter are designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series supports broadband applications and easily enables a more comfortable network.

The MMC-10G2F series is a compact, multi-rate compatible SFP+ optical repeater (media converter). This media converter is designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series also supports "LFP (Link Fault Pass Through) functionality." The MMC series is compatible with broadband applications, making it easy to achieve a more comfortable network.

The FRM220-40G-2Q is a 3R transponder from 40G QSFP+ to 40G QSFP+, enabling media conversion and extending transmission distances for 40G Ethernet. The FRM220-40G-2Q addresses the increasing bandwidth demands of data centers and enterprises. With the emergence of high-end servers and Ethernet switches equipped with 40G Ethernet interfaces, there is a growing demand for media conversion (from multimode to single mode) and link extension (from single mode to single mode). The FRM220-40G-2Q has two 40G QSFP+ ports, and the QSFP+ modules are hot-swappable. It is easy to set up and install, operating with plug-and-play functionality. The FRM220-40G2Q can be inserted into not only the FRM220-CH20, CH08, and CH04 modular chassis but also the CH02M and CH02/SMT standalone chassis.

The FRM220-TM-10GMux is a 10G MUX ponder that converts 7× 1GE to 10G. This MUX ponder is based on TDM technology, transferring seven individual gigabit Ethernet data streams to a 10 Gbps SFP+ based trunk port. This achieves significant cost savings and excellent fiber efficiency compared to optical multiplexing using CWDM. The FRM220-TM-10GMux features a 7x 1GE SFP-based access interface that can accommodate various types of SFPs. The module supports various models, including multimode, single-mode, and 1Gbps copper SFPs. The trunk port is SFP+ 10Gbps, allowing flexible connection options for direct connections between Mux ponders within a WDM system or between two devices. Additionally, the chassis FRM220-CH20 can accommodate up to 10 line cards, while the CH08 can accommodate up to 4 line cards.

The MMC-1GFT series is a compact design optical media converter that supports 1Gbps. The features of this media converter are designed to easily and affordably connect two types of segments. The MMC series can be used not only as a standalone device but also as a slide-in module for a 1RU size rack (MMC-CH12) that can accommodate up to 12 units. The MMC series also supports the "LFP (Link Fault Pass Through) function." The MMC series caters to broadband applications, making it easy to achieve a more comfortable network.

The OT8200-10GE-SFP+ is a 10G optical media converter designed for service providers and enterprises, equipped with 2×10G SFP+ ports. It supports inbound remote monitoring capabilities, allowing for the monitoring of a remote OT8200-10GE-SFP+ connected via the WAN port. Additionally, it is compatible with Dying Gasp, which notifies of power loss during outages, enabling rapid response to failures. The OT8200 series is a multi-service platform that provides a wide range of solutions for service providers and enterprises, including 10G to 100G connections, DWDM transmission, fiber multiplexers, and media converters.

The XMC-10GC is an unmanaged Ethernet optical media converter with RJ45 ports supporting 10G/5G/2.5G/1G/100M and a 10G SFP+ port. It is ideal for a simple and cost-effective 10G network, as it can convert 10GBase-T and 10G SFP+ at wire speed.

The 『FRM220-10GCM』 is a 2-port 10GBase-R and 1-port 100M/1G/2.5G/10GBase-T Ethernet converter. It has built-in SNMP and web-based management features, allowing network administrators to monitor, configure, and control each 10G converter (both local and remote). Additionally, it is equipped with one 100M/1G/2.5G/10GBase-T RJ45 port, enabling connection of 100M/1G/2.5G/10G compatible devices to a 10G Ethernet fiber backbone. 【Features】 ■ Local/Remote In-band management support ■ Far-end fault indication (FEF indication) ■ Auto-sensing/Auto MDI/MDIX ■ LFPT function ■ Flow control (pause) *For more details, please download the PDF or feel free to contact us.